Connect to a printer on the wireless network

Similar Questions

• HP Photosmart B109: cannot connect the printer to the wireless network

  I have some setting wrong my printer for wireless printing. It has worked well in the past, but with my new macbook air - this isn't.

  I can't access the function where to add the printer to the wireless network (my router does not support WPS so his password WPA).

  I remember setting this up on a PC - easy with the driver provided by HP, but on the Mac, the configuration tool does not appear to be a function where I add the printer to the wireless network - and HP did not provide a driver, because it is supposed to work with the mac built-in software.

  The manual says only: "follow the instructions on the screen", but the printer does not have instructions on how to connect - on-screen tests, only that it is connected...

  Anyone who knows how to add the printer to a wireless network?

  Hello @Joahkim!

  Welcome to the HP community!

  I understand that you have a problem to set up all-in-one printer wireless HP Photosmart (B109n) with your new MacBook Air OS x 10.10. I want to help you with this.

  Have you changed your router or your password since the MacBook Air? If this is not the case, your printer can still be connected to the network and the trickiest part of that place will be done for us already.

  We will print a Network Configuration report to see if it is connected:

  • On the Control Panel, press the button next to Scan. The Scan/Wireless menu.

• OfficeJet 6700 cannot find the printer on the wireless network

  Printer is connected to my wireless network.

  Print diagnostic shows PASS for everything and I have ip (DHCP 192.168.2.19)

  The printer is able to connect to the internet to download updates and pull content for apps (colouring etc...)

  I disabled my firewall of windows to resolve the problems, but the HP software was listed as exceptions anyway.

  Using the printer on my computer connection wizard I entered both the IP address and the host name but it is "impossible to find the printer.

  My router is a netgear WNDR3700.

  The ssid that I am connected is good.  I have a network of both comments, but it does not broadcast its ssid and I am not connected to it.

  I am getting very frustrated.  I'm tech-saavy and it should be much easier than this.

  I wonder if anyone else encountered this problem and can anyone offer suggestions?

  Thanks in advance...

  Hi mbelsey,

  By following the steps below resets the defaults on the printer. Reconnect the printer to the wireless network using the address assigned to the router DHCP. Once you have connected it to try to access the EWS and Ping the printer. Let me know what you find?

  First step: restore the default settings of network on your product

   

• OfficeJet 4620 3-in-1 printer will not print on the wireless network

  Have updated my Mac OSX to Yosemite (10.10), & now the 4620 Officejet will not see my WiFi network.  Have already uninstalled & reinstalled, used USB and installation CD.  Restarted the router also.  The printer went as far "Retore System Defaults".  Any suggestions?

  THX

  Hi @tomiet,

  Welcome to the HP Forums!

  I see that your HP Officejet 4620 will print on your wireless network, using Mac OS X 10.10. I'm sorry to hear that, but I'm happy to help you!

  I recommend trying an installation installation of Wireless USB. Please consult this guide, convert a wireless USB connected printer. In addition, this video can help as well, Configuration of wireless USB printers.

  I hope this will solve your problem of connection and have a nice day!

• Can't find existing printer on the wireless network

  I'm trying to establish a connection between a laptop recent Dell running Windows 7 and HP C7250 printer that is connected to the same network without wire connected to the computer.  I downloaded the correct driver from HP and during the installation process the installer wants to know how I want to set up the connection between the computer and the printer.  I select "wireless network" and the software goes out and tries to find the printer.  It relates, again, that there is no printer on the network.  I tried the advanced search option of installation of HP - looking for the printer using its IP address (which I have of it is implemented the process) but it is impossible to find out who way or the other.  The printer has already been successfully implemented to communicate with the network (it indicates that it is connected, provides the IP address, etc.).  I know that the computer works on the wireless network: she uses this path to connect to the internet.  I wonder why this printer is not found.  Troubleshooting HP message suggests that the computer security software can block recognition.  I am running MS Security Essentials.  Is it possible this?  The printer cannot provide the correct information on the network for any reason any?  BTW, this configuration was working at once but then stopped for some reason any.  I followed all instructions associated with this facility but havecome in the gaps.  Any suggestions on how I could disturb more pull this problem?

  The likely cause is the security setting. A few things to try:

  1. Open your browser and the IP address of the printer.  If the printer is properly connected to the network, you should see the web server integrated for the printer.  If this succeeds, then go to step 2, otherwise study why the printer isn't appearing any more on the network.
  2. Download and run the HP Network Diagnostic Utility. It will solve various aspects of network connectivity.
  3. If the above does not resolve the problem, then follow the steps in this additional debugging page, which may include to manually adjust the settings of the firewall as shown here.   There are a number of ports that the AIO units use to communicate with the computer.

• Cannot find the printer on the wireless network

  My new 6500 a 710n-z printer copier copies very well.  Also, it detects the wireless network and is given an address 169.254.182.35.  I have reset the router several times using the WPS button.  But after I installed the software on my netbook ACER Windows XP, the computer cannot find the printer.  I spent three days trying to get the $% # ^ & * to work.  I see in some documents to get a 169.254. IP address, so I'm probably not connected?  But what to do?

  Well Yes, a 169.254 IP address... is auto-assignée when he can't get one from the router.  The WPS button does not reset the router.

  Do this on the printer: Setup > network > Wireless Setup Wizard. Follow the instructions.

• connect the printer to the wireless network

  I have a HP Photosmart C4580 and I'm trying to connect to my wifi on my mac network. I used it for a long time to print via USB cable but I want to print wireless.

  Help please? It drives me crazy. I don't know what to try next.

  Thanks for the reply

  Since you have the Mac OSX 10.9.2 from a USB connection to the wireless is a little more difficult, only because there is no complete features of HP software to help us.

  First, you will need to restore the default settings of network on the printer. For that;

  • Press the Wireless on the product
  • Press the button next to the arrow down on the screen until restore network
    Default is highlighted and press OK.
  • Confirm that you want to restore the default settings of the network.
  • Press again the Wireless on the product
  • Press the button next to the arrow down on the screen until Turn Radio One or turn
    Radio Off is highlighted, and press OK. (Radio must be on)

  Now, on your Mac, click the wireless on the left corner ( ) and join hpsetup. Once the Mac is connected to this network, we need on the printer print a test report;

  • Press the Wireless on the product.
  • Press the button next to the arrow down on the display until wireless network
    Test is highlighted, and press OK.
  • Make a note of the IP address

  Open Safari on Mac and enter the IP address in the address bar, a page of the printer should load for you. Click on network > Wireless (802.11) > advanced, which should bring you to this page:

  From there you can enter the SSID of the network you want to connect, enter the WEP or WPA - PSK password and apply the setting. Once the printer is connected to the network, replace the Mac on your network and you should be able to add the printer.

  Let me know if it works for you

• Misplaced installation CD, can not reconnect the printer to the wireless network

  Recently, I replaced my router, which forced me to re-setup my home network. A consequence of this is now my HP Officejet Pro does not connect on the radio I searched up and down to the CD without a bit of luck. Is there another way to connect my printer to the network?

  Thank you

  Aaron

  First replace your router you should not have to reinstall the software.  Try here.

  Replacement of your wireless router try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

  If you think that your driver and software are watered, download the installation set up files on the web site of HP.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=4323659 & CC = US & DLC = in & LC =

• Printing from a PC to a printer on the wireless network wireless cable

  My Photosmart 7520/25 is on my wireless network that uses a Netgear router.

  How can I print to this printer, using a PC running Vista Business Desktop computer that is connected to the router?

  The printer is connected to the network and trying to set up the connection/print drivers on the PC, the printer is never "found".

  I have no problem to print on printer even my old laptop XP wireless.

  Tried a lot of things and not get the right settings or find the right key words to find the solution.

  To save time, I just bit the bullet and spent $25 for a wireless USB.

  Use the option "Direct print", voila! fact.

  When in doubt, go with the hardware solution...

• You can print wireless from a laptop to an HP DJ3520e not to add the printer to the wireless network?

  Is it possible to just wireless printing from the computer directly to the printer without joining the printer to the network?  If so, how?

  Thank you so much erico.  I tried and was able to print.  Well done!

• Printer all in one HP3520 - how to select the wireless network and enter the WEP key?

  According to print my wireless network is detected.

  How to connect the! @# % printer $ fo the wireless network and enter the WEP key?

  Instructions on the HP site tell me to selet NETWORK on the printer control panel.  Well, there's a way to select the NETWORK from the control panel.  It is not an option for him.

  I downnloaded and installed the latest drivers.

  I have restored the default settings.

  How to select the wireless network and enter the WEP key?

  All of HP's instructions seem to be for a newer printer with a touchscreen.

  I want that the printer is connected to my main computer via the USB port.  I want to be able to print wireless phones and tablets.

  My 3520 is not a 'touch Screen' and it has wifi.

  However, the following work:

  Try to open the HP Deskjet 3520 icon, open the utilities tab, click on convert USB wireless, by following the steps on the screen.

  This leads me to believe that ONLY the wireless doesn't work.  I know now that the part of the sentence "Convert USB to wireless connection" is supposed to mean "works like USB and wireless.

  Thank you for your help

• HP LaserJet Pro CM1415fnw color multifunction printer - cannot FIND the WIRELESS NETWORKS

  PRINTER: HP LaserJet Pro CM1415fnw color multifunction printer

  OS: Windows 7

  OWNER: More than 2 years without any problem

  LOCATION/SET-UP: To my personal residence. All-in-one router through the cable company.

  QUESTION: Suddenly, printer cannot find wireless networks. Nothing has changed recently in my service provider or equipment. I know that the router and the internet is not the problem because our 2 smart phones and three laptops still not connect. I triend manually configure the network using the SSID and key phrases, but still nothing.

  Help!

  I would like to perform a hard reset by removing the power of the whole machienethrough the power cord for 30 seconds. Depending on whether I have would reconnect the printer to the wireless network and set a static IP address.

  -Spencer

• Connect my HP C4580 to my wireless network

  My mother gave us his old HP Photosmart C4580.

  We do not have the installation disc.

  We run Mac OSX 10.9.3

  Printing software downloads automatically when you connect the printer via the USB port.

  We run a Comcast wireless router

  How we install the printer to print on the wireless network?

  Any help appreciated.

  Hi richards-k,.

  Sorry, this model has the old embedded Web server.

  Once you click Wireless (802.11), you can simply fill in the information of the network.

  If you do not know the encryption network made me know. You can also call your router company for this information.

  Here is a screenshot of the fields to fill.

  

  Enter the SSID. (your network name)

  Select Infrastructure.

  Select the encryption type. (WEP, WPA or Open - no password)

  Apply the settings.

  You have now completed the configuration of wireless network.

  Click on the airport on the upper right corner on a Mac and select your network.

  Click on the Apple.
  Click System Preferences, click the printers and scanners, and then click on the + sign, then select the printer in the list, make sure that the printer is listed beside the use: displays the name of the correct printer and not Airprint, (Airprint is a driver apple pre-installed with the basic features) click on the Add button. You may need to click the drop down to select your printer.

  Test the printer.

  Then switch back to printers and scanners and remove it from the list for the USB driver.

  Unplug the USB cable.

  Please let me know how you did.

  Thank you.

• I can't print due to the "wireless network connection" doesn't have a valid IP address.

  Cannot print wireless

  I can't print due to the "wireless network connection" doesn't have a valid IP address.  How can I fix this problem myself (an absolute non-techie)?

  Hello

  -Did you change your computer, after which the question began?
  -Check if you are connected to the network?

  The question seems more like a network connection problem. I would like you to do the following.

  Method 1: run the Network Troubleshooter utility and see if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

   
  Method 2: release and renew the IP (Internet Protocol) address and see if the problem persists.

  has. click Start. Type cmd in the search box and press ENTER.
  b. at the command prompt, type the following command and press ENTER:
  ipconfig/all (there is a space between ipconfig and /)
  The command ipconfig/all command displays for all your network adapters, TCP/IP in Windows settings.
   
  If your IP address of your Local network connection is 0.0.0.0 or 169.x.x.x (where x is a number any), then your computer is not getting an IP address from the router.
  If this is the case, try this:
  ·        enough ipconfig at the command prompt and press ENTER
  ·        ipconfig / renew in the command prompt and press ENTER

  Method 3:

  Network printer problems

  Note: The steps also apply to Windows 7.

• 4 iPad unable to detect the C4599 already connected to the wireless network printer

  Hi all, I have a C4599 All in One Printer. I have just set up successfully with a WiFi connection to my router / modem network (infrastructure mode). There is no error message and I can print from a variety of laptops Windows (XP, Vista and 7). I loaded the HP eprint app on my Ipad 4 but it can not detect the printer. Note that the HP site says that this printer is compatible with the App ePrint.

  A second and possibly related is that I recorded with the HP eprint service website but I can't get the code or e-mail address for my printer. I can't find any way to turn it on the Web Services on the printer? (The HP site says this should be under Setup > wireless to the printer, but it is not.) There are only options to turn on/off the wireless, testing the wireless and print the wireless network and printer settings (which are all OK > PASS or information).

  Any ideas?

  Thank you

  With the update that has been done to the ePrint application, some of the old printers lost the ability to use this application to print from. The printer would not print directly from the iPad to the printer either. This is a feature called AirPrint. When you have the possibility to use AirPrint, he must place the unit on the same network as the printer, pull up a photo, press the action button on the iPad and then select print. The iPad will then give an option of the printer to print from if there is more than one printer capable of of AirPrint on the network.

  The printer cannot produce a code to register and save ePrint due to the age of the printer. Printers that have the ability of ePrint are a majority of those who have been in production in 2010 and later versions. A few Photosmarts who have the ability to use ePrint AirPrint are the 7520,6520 and the 5520. To learn more about these printers, see this link here.