HP Photosmart B109: cannot connect the printer to the wireless network

Similar Questions

• Photosmart C6180 cannot detect the wireless network

  I have a Photosmart C6180 for over a year, and until recently it connected wireless very well.  But since a week ago, it can't detect the wireless network.  I turned off the printer and wireless router several times each without success.  The "Wireless Setup Wizard" running on the C6180does not help. Watch simply screen printer "looking for... wireless router. "indefinitely, until the function Cancel.  The wireless router is about four feet from the printer, in a direct line of sight.  In addition, I have wireless Internet access using the same router and continue to do this successfully, then the router itself works.  Recently I have updated the firmware on the router as well (after the beginning of this problem).  Running the network Test report wireless on a 'PASS' C6180 returns for "Radio on" but a "FAILURE" for "use of Radio". The radio broadcasts as "about" section of the Menu Radio wireless network.  My router is a Belkin Wireless G Router model F5D7230-4.  The printer prints very well with a wired connection, but wireless connectivity has been a key reason behind my purchase.  Any suggestions greatly appreciated.

  Sorry, but your wireless radio is dead.  Its time for a new printer.

• Windows 7 do not connect the wireless network adapter

  When in Device Manager it is k o workining with all installed software & advance mode: saying activated

  OM

  Original title: windows 7 do not connect the wireless network adapter when in Device Manager, it works with all installed software & advance mode: saying activated

  Hi omsaini,

  Thanks for posting your query on the Microsoft Community.

  Sorry to hear that you have to connect to a wireless network adapter trouble.

  To help you further on this subject, it would have been really helpful for us if you had

  mentioned a few details such as:

  (1) is there an error message you get when you try to connect to the internet?
  (2) is the persistent problem with all browsers installed on the machine?
  (3) what is the brand and the type of the network adapter (whether ADSL or an adapter included)?

  However, there are a few steps that we can try first:

  a. the following link has a very good tutorial on how to install a network adapter on the computer:

  http://Windows.Microsoft.com/is-is/Windows-XP/help/networking/install-wireless-network-adapter
  (Note: the link is for Windows XP but works for Windows thus 7\8)

  b. the following link provides a holistic approach for DIY difficulty on the connectivity of Windows:

  h ttp://Windows.Microsoft.com/en-US/Windows/Network-Connection-Problem-Help#Network-Problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  c. also, you can visit the following links as well:
        http://Windows.Microsoft.com/en-us/Windows/cant-find-wireless-network#1TC=Windows-7
  And http://windows.microsoft.com/en-us/windows/cant-connect-to-network#1TC=windows-7

  I hope this helps. Please contact us if you encounter any problem.

• HP LaserJet Pro CM1415fnw color multifunction printer - cannot FIND the WIRELESS NETWORKS

  PRINTER: HP LaserJet Pro CM1415fnw color multifunction printer

  OS: Windows 7

  OWNER: More than 2 years without any problem

  LOCATION/SET-UP: To my personal residence. All-in-one router through the cable company.

  QUESTION: Suddenly, printer cannot find wireless networks. Nothing has changed recently in my service provider or equipment. I know that the router and the internet is not the problem because our 2 smart phones and three laptops still not connect. I triend manually configure the network using the SSID and key phrases, but still nothing.

  Help!

  I would like to perform a hard reset by removing the power of the whole machienethrough the power cord for 30 seconds. Depending on whether I have would reconnect the printer to the wireless network and set a static IP address.

  -Spencer

• Photosmart C4780 "cannot find the wireless router.

  OK so apparently I'm not as tech savvy as I like to think of myself. I just got a used C4780 and spent 12 hours trying to figure how to set up so that I can print wireless. I had zero luck with that.

  I read that the WPS connection method is more easy then I tried that first. After a few failed attempts, I tried to download the software for Windows 8 (as the disc that comes with it only goes to to Windows 7). I got the same error message 4 times (something Microsoft Visual C++ Runtime error), so I then tried the method of the PIN code. After several settings (with the help of my brother on the phone, so I don't really remember what I did unfortunately) just as many failures to connect and I gave up this process.  I printed the 'Network Configuration' Page and the 'wireless network Test report", but I don't have much of a clue as to what it now means. I don't understand what I am doing wrong or what I could do different. The thing that really stumps me, is that the test report said that the printer can't find my router, but at the bottom of the Configuration Page, it lists my wireless network...

  USEFUL/IMPORTANT INFO:

  -HP Photosmart C4780

  -Lenovo all-in-One 8.1 Windows 64 bit

  -router made by ARRIS and provided by my ISP (CableONE)

  -J' installed all the updates that are available for Windows

  -J' restarted the printer, computer, router AND several times

  -my wireless router is in another room, but not more than perhaps 20 feet away

  Side note: I have also a mini iPad... just throw it out there in case it might be a better tool to put up with... If you need to know something more to help me let me know! Thank you for cause in advance that I'm going stir crazy trying to figure this!

  JanessaMarie92 wrote:
  I went on the website of my ISP and discovered that I can't get a new router because of this little note...

  "Cable telephone Service is supported only on Arris modems rented your office of a cable or bought by http://yourbroadbandstore.com/solutions/cableone/."

  Copy + paste directly from their Web site.

  It's OK... you're using their product.  they can always put the Bridge mode.  Call them and tell them that you want to use your OWN router and they put it in Bridge mode.

  EDIT - Bridge mode just turns off the router part and use it as a modem only.

• 5525 printer cannot find the wireless network

  Help

  I'm not good with technical stuff and need help with this problem.  Printer works well before going on holiday - power off, including the CISCO router when we went away--returned and turned on any return, printer will not connect to the router again.

  Have reinstalled router without result.  All other computers, phones, etc. to connect to the router fine.

  Wireless network test that the MAC address filtering is enabled, they suggest however have checked this and it's not.

  Wireless configuration wizard can find the network but it just seems impossible to connect to him.

  Please assume the lowest level of technical understanding when you reply!

  Thank you

  Hi K27,.

  I see that you are having some problems getting your Photosmart 5525 reconnected to your network after just unplugging a bit. I understand that you have your information wirelessly, but I don't want to set a link here which will take you to our HP print and doctor Scan, which can help you check some things on the wireless network.

  Since you already feed the router to bike, I would recommend restoring the default values of network on the front panel of the printer. You'll want to have your printer on the home screen (should say Photo, Apps and copy). On this screen you want to touch the key/tool icon in the upper right corner, then you want to click on wireless and made scroll down looking for default network. Once you click on that it will ask if you are sure and you want to say Yes. Once that is done, I would recommend the router/printer power cycling tips that were previously provided and then run the wireless configuration that you've been already and it should be able to connect at this time.

  That should hopefully fix it for you, so let me know what happens and I wish you a nice day!

• V715w cannot set the wireless network

  Reference Dell V715w printer.  W7 x 64.

  Firmware already updated, clean uninstall/install, restarted router & modem, disconnect, etc. (all bases).  The name of the network on the control panel of the printer says '7ff5c4 print server.  This isn't my SSID.  When reinstalling, I never get the window to select the wireless network; Instead, the Setup program goes directly to methods of connection/bug.  Any help?  How can I do a hard reset of the printer?  I already unplugged for a long time; I don't see a reset button. I already have the two software on the printer resets.

  Short version: printer not finding a decent wireless network; install the software never gives me the chance to choose the wireless network.

  wdprice3,

  It's confusing. I have this model and have minor problems with it.

  Unplug the printer from the wall. Remove the brick power for 60 seconds. This will reset the printer receives error messages. Maybe this will reset the printer.

  

  Rick

• Cisco linksys router and cannot access the wireless network

  We have cisco linksys wireless router.  When we installed everything first, we could connect our wireless laptops to the network.  Now, however, the network is detected, but there is no access to the internet.  We have even a guy from ATT were out and he said that the wireless router has been installed backwards?  He installed a dsl fast access on our laptop icon, and now we can access the wireless network but only if we connect as the first.  We can also connect iPod to the wireless network.  They detect the network, but when we enter the password cannot connect.

  Hi JC_3094,

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, it looks like you aren't able to access the Internet.

  The likely causes of this problem is if the router is not configured properly.

  Here are some steps that should help you to solve this problem.

  Method 1:

  Check if the router is configured properly to get access to the Internet.

  Method 2:

  Try the steps mentioned in this link and check:

  This tutorial is designed to help you identify and solve problems with a wired (Ethernet) and wireless (Wi - Fi) network connections in Windows.

  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   

  Method 3:

   

  If there is a frequent disconnection try to update the firmware on the router and check.

   

  In addition, visit these links for more information:

   

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

   

  Hope this information helps. Respond us if you have any questions with windows and we will be happy to help.

• Satellite M45-S265 - cannot install the wireless network

  Hi all!

  My laptop has had a big problem and HARD drive crashed. Unfortunately I lost all the data with no chance to recover anything. I installed a new HARD drive. I installed Win XP - SP3.

  But I'm unable to install the wireless network. I continue to pass the button in front of the laptop - nothing. I type the combination Fn + F8 - nothing. I think that I have not installed the driver corectly.

  P.S. - of course, I lost the CD.

  Can someone help me?

  Thank you.

  Hey,.

  > I think that I have not installed the driver corectly.
  Then you need to (re) install the WLAN driver. Otherwise, you are not able to use the WLAN connection correctly.

  Anyway, your model is listed on official Toshiba US page so that you can get all the drivers:
  http://www.CSD.Toshiba.com

  If you have any other questions, please let us know! :)

• Router E4200, cannot secure the wireless network

  When my E4200 wireless network appears on a discovery list of wireless networks, there a padlock beside him in devices (like my Xbox and iPhone) that who would use to show that it is a wireless network, requiring a password. When I use my Xbox to connect wireless now, he said: "you connect to an unsecured network. Are you sure you want to continue? »

  I used the web portal to select 'Factory Reset' of my router. I also told my iPhone to forget and not automatically connect wireless network. After factory reset, I went to the configuration section of the web page wireless network access router, put a new name for the wireless network, personal WPA2 enabled for 2.4 and 5 GHz networks, developed a completely new password for two I had never used before and then looked for the network on my iPhone. I chose it and it connected right away without asking for a password. Still once, the network does not appear with a padlock next to him in the list of devices to the network from my iPhone WiFi and my XBox says always that this is an unsecured network.

  When using my internet browser to access router, WiFi networks are both classified as WPA2 Personal and each has a password in the password box (and Yes, I recorded the changes - that's what it shows even if I disconnect and then reconnect to the router access.) I tried to remove the power cord for 30 seconds and plug in again and there is no change.

  It's quite a recent change, like maybe the last week or more. I don't know if there was a firmware update or what - my router is configured for auto updates and when I click to check the latest updates, it says that there are no more updates available.

  TL; Dr: said access my router my wireless security is turned on. None of my wireless devices see as secure WiFi networks and each of them can connect without having to type a password.

  Do a reset factory and set up from scratch.

  If this fails, try this:

  Manually download the FW file to the local office of PCs.
  Reset the router, use IE or FF with all security disabled add-ons, load the FW file and let you treat.
  Factory reset the router once more and set up from scratch.

• Moved from Office Windows 7 from one room to the other and now it cannot find the wireless network

  Hello world

  I have a HP Pavilion running Windows 7.

  He was hooked through the ethernet in a single room.

  I moved it to another room where there was no inflexible access, so I relied on the use of our wireless network.

  Now, the computer will not even find the wireless network.  When I have the help, it says "no available connection."

  In the center of the network, selecting wireless has a red X to the left of the green signal bars.

  At first, I wondered if maybe the computer was in a "dead point" in our House, but I've put a laptop beside him and he found the thin wireless network.

  Any help?

  Update: I tried system restore and tried to stop/resume knowledge network locations, but to no avail.

  Here is the info on my card wireless directly from HP site:

  Original driver for the solutions of Dualband network Atheros 802.11 Wireless Module a/b/g/n.

  I found what I think, it's their website, (http://www.atheros.cz/atheros-wireless-drivers.php), but surprise... they only model # s, my info does not.  Ugh.

• HP PhotoSmart restricted 6525 in the wireless network connection

  Hello

  I need to connect my HP PhotoSmart 6525 to a wireless network in my college dorm room.  IT supports the University has published the requirements for the connection to the restricted network and attention that many printers cannot. I looked on the HP website to see if my printer supports the protocols required, but information HP provides on the website is not detailed enough to tell.  I hope that someone on the forum can help me.

  Here are the requirements of universities to connect to the restricted network:

  ----------------------------

  • A device with a Wi - Fi adapter capable of 802.11 g, 802. 11A or 802.11n

    Note: 802. 11 b-only devices are not supported

  • To enable DHCP (Dynamic Host Configuration Protocol) to obtain IP configuration information

  • Operating system and drivers that support:
    • authentication of 802. 1 x (also commonly referred to as WPA-Enterprise or WPA2-Enterprise)
    • WPA2-AES (preferred) or WPA-TKIP
    • EAP-PEAPv0 (external auth) / MSCHAPv2 (internal auth) or EAP-TTLS (external auth) / MSCHAPv2 (inner auth)

  All connections to the campus network, no matter what either wired or wireless, must also bear the following (which are installed and enabled by default on modern operating systems):

  • IPv4 (Internet Protocol version 4)
  • TCP (Transmission Control Protocol)
  • UDP (User Datagram Protocol)
  • ICMP (Internet Control Message Protocol)

  ----------------------------

  Does anyone know if the HP PhotoSmart 6525 meets these requirements?  For example, he says "PEAPv0(outer auth)/EAP-MSCHAPv2 (internal auth)" or "EAP-TTLS(outer auth)/MSCHAPv2(inner auth)?

  Thanks in advance,

  Paul2

  "I could check on the web site of www.wi-fi.org HP Photosmart 6520 series is approved for"WPA-Personal"and"WPA2-Personal"and _not_ certified for" ' WPA-Enterprise and WPA2-Enterprise.  The Enterprise versions require the device to authenticate with a username and password, while the personal versions are not.  I also talked to the school, IT supports and independently, they have said that the problem with the help of authentication printers more is that you can not provide a user name and password.  Given that I could check with two sources independently, according to me, the definitive answer is that I can't use the printer with wireless network from business school.

• HP B209a cannot find the wireless network

  I'm running into a problem with my B209a find a wireless network.  I'm not well versed in wireless/network please bare with me.   I have an iMac with OS X 10.8.2.  Recently, I upgraded my router to an Airport Extreme.  My Mac can see the printer correctly, however, the printer cannot now see the network.  Airport utility, I see all our appliances listed under wireless clients and an IP address without a name (printer?).  Doesn't look like not to add manually wireless clients is no longer an option.

  The wireless is configured with WPA/WPA2 Personal Security.  The radio is set to 802. 11A / n - 802.11b/g/n (automatic).  Anyone have any ideas on how to solve this problem?  Thank you.

  1. Printer, restore the configuration of the network printer.
  2. Turn on the radio to the printer.
  3. From your Mac, connect to the network printer called hpsetup.
  4. Open Safari and select Bookmarks-> Show all bookmarks.
  5. Select Hello on the left.  Your printer should appear in the main window of Safari.
  6. Double-click the printer.  The printer's internal web page should appear.
  7. The Green Network on the printer web page tab.
  8. Select Wireless (802.11) on the left
  9. Press start the wizard and follow the prompts to connect the printer to the network.

  This should get back you on your feet.

• Cannot connect officejet 6500 to a wireless network on a MacMini

  Product: HP OfficeJet 6500 E710n-z

  Firmware version: CIP1FN1126AR

  Operating system: Mac OS 10.6.8

  Error message: unable to connect to the network. MAC address filtering can be enabled on your wireless router...

  Analytical diagnosis:... No filtering: FAILURE

  Here's the implementation. My MacMini is connected directly to the Internet. I turned on Internet Sharing in OS X to share ethernet connection of the MacMini to the Internet through an integrated Wi - Fi AirPort card from the MacMini. Other devices such as iPhones are able to see the connection network and access after I provide the right WEP password.

  The HP printer see the Wi - Fi, but after that I provide the correct WEP password, it still does not connect and tells me that I must have active filtering by MAC address. The HP is still unable to connect wireless even when I disable firewall in Mac OS x.

  I cannot find any setting in Mac OS X to enter the MAC address of the printer.

  I would like to be able to use wireless printers features, but can't because I can't clear the checkpoint.

  Help, please.

  I was able to get the printer and the computer communicate wirelessly by following these steps:

  1. connect the printer directly to the computer via an ethernet cable.

  2. open the Utility from HP (version 5.0.1) application > click the settings > in group settings of the printer , click additional settings > click Open built-in Web server .

  3. once the built-in Web server opens, click on the network tab, and then click the Advanced Options link in the group Wireless (802.11) in the left navigation sidebar.

  4.1 Network Interface onvalue.

  4.2 under network name, set RITS at the same entrance shown in System Preferences > sharing > Internet sharing > AirPort Options > network name field.
  4.3 under network settings, select Infrastructure.

  4.4 Select WEP encryption.

  4.5 authentication sharedvalue.

  4.6. Enter the appropriate WEP key WEP key and confirm the WEP key fields.

  4.7 click the apply button to save the changes.

  5. unplug the printer from the computer by disconnecting the ethernet cable.

  6 re - activate sharing Internet on your Mac if necessary (i.e. If you disabled in step 4.2 to get the SSID name).

  After having done that, I am now able to print documents from my MacMini to my HP OfficeJet wireless. I have not tested other functions of the printer to see if I can scan, fax or set up ePrint AirPrint, but at least for basic printing I can do wireless (for now).

  That will suffice until I can buy a dedicated wireless as an AirPort Extreme router.

• DeskJet Ink Advantage 3635: How can I connect my printer to my wireless network?

  I have a wireless set up and now I want to add a wireless printer. I using Chromebook and I would Google Cloud print. The model is consistent, but the device appears on the network. What can I do to reselove this problem? Thank you.

  Take a look at Chapter 7 of your User Guide.

  Page 67 begins the section "to connect the printer.  After that connect you the printer to the network successfully, try to use the HP on Chromebook print soft again.

  WyreNut