Original title: the connection card wireless network with windows 7 problem

Similar Questions

• wireless network with windows vista problems

  My laptop has windows vista edition family service pack 1. It does not connect to my router thomson TG585 v7 gateway. Ive tried everything nothing helped. I've heard this may be a compatibility problem with windows vista and there may be an available for this patch. Is this correct and how I could get it?

  You have a power switch Wireless switch on your laptop?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Troubleshoot network adapter problems to Microsoft link above.

  Try without commitment TCP/IPv6:

  If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• I can't connect to wireless internet with windows vista

  I bought a new HP Pavilion dv6 laptop with Windows Vista and I tried to connect to the internet from my laptop via router ADSL2 + wireless D-link but my network is not visible wireless.

  I tried to plug my ether cable and this time my network was visible, but it would not connect.

  I am able to connect from another laptop with windows XP wireless through the same router.

  My HP laptop connects via WiFi in other places, but not at home via D-link router.

  I am not able to connect to internet from my laptop HP since I bought it 9 months ago.

  
  

  What can possibly be the reason? Can you help me connect to the internet?

  Thank you

  It seems that your settings are not correct for the access provider or router (or both).  I suggest that you contact your ISP and have them walk you step by step in the process of installation and configuration and do not let them off the coast of the Nigerian line you have a good connection, as you wish.  They know that the parameters so that we don't have, so they can help you better than we can, and I'm sure they will be happy to do.

  Here is an article (with many additional useful links) on how to set up a home network in Vista:http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network.

  Here is an article on how configure and connect to a Vista wireless network: http://www.watchingthenet.com/windows-vista-tip-how-to-setup-and-connect-to-a-wireless-network.html.

  Here is a Microsoft Technet article on how to install and connect to a Vista wireless network:http://technet.microsoft.com/en-us/library/bb878035.aspx.

  Between these three articles and assisancce by your ISP, you should be running without delay.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The use of wireless network on Windows XP mode?

  My OS is MS.windows 7 Pro. / 32-bit. And I have already installed windows XP mode.  Right now I can access to the Wireless network & cable on window 7 mode but I can access the network only by cable on window XP mode (because the wireless adapter are not yet on the taskbar. How do I do?

  Configure Virtual PC to use the host PC wireless network adapter:

  1. turn off the Virtual PC.
  2. click on Start > all programs > Windows Virtual PC >Windows Virtual PC .
  3. right click Windows XP Mode.vmcx and click settings .
  4. click on the network .
  5. the value 2 adapter adapter wireless network from the host PC.
  6. click on OK .

  Then start the virtual machine. Boulder computer Maven
  Most Microsoft Valuable Professional

• Unable to connect to a wireless network with Windows 7 computer laptop.

  After resetting my router netgear wireless home network, I have not been able to access my own network with my laptop. I already had access to the internet with a wireless ethernet cable and ankles bound to the router. After reset the netgear router, I was able to access the internet from two other laptops XP and an Acer mini wireless with no problems at all. But my new laptop Toshiba with Windows 7 could not connect, even if he could detect the network. I tried all day even resort to the ethernet socket and wireless cable, but even that would no longer work. I was able to connect using this same cable attached.

  Hello

  Seems that the Wireless does not work on the Dell.

  This is the process to try to find what wrong with it.

  ------------------

  Assuming that wireless router is configured correctly, it is a signal and the wireless card on the computer is physically in.

  Maybe this can help.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  To ensure that if there is Wireless Utility a seller is not running with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd AV/Firewall/security software part, s costume keep blocking aspects of Local traffic even it they are off (disabled).

  If possible set up the firewall correctly, /Security costume otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Unable to connect to wireless internet with error message: "problem with wireless adapter or access point.

  Original title: I am trying to connect to my WiFi.

  I am trying to connect to my wifi but it keep saying there is a "problem with wireless adapter or access point. I tried the steps that he told me to do but still no help.

  Hello

  Thanks for posting your question in the community of Microsoft Windows. I understand that you are facing problems with your wireless internet connection. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

  1 have you ever done any recent hardware or exchange of software on your computer before the show?

  2. What is the brand and model of the computer?

  Method 1:

  Follow the steps in the link below.

  Of connection problems in Windows wireless and wired network: http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Follow the steps in the link below.

  Using the troubleshooter from network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 3:

  Follow the steps in the link below.

  How can I troubleshoot network card? :

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• The Task Manager shows only the connection information of network with no menu - how to fix?

  I when I try to open the task manager of the only information that appears is the news of network connections.  There is no menu, and when I right click the only option is to close.

  Looks like you run the Task Manager using tiny/small footprint.

  If you double-click on the empty space around the border of the screen of the Task Manager, it will change from normal mode, and then you should see the tabs you are accustomed to seeing.

  You can read about it here:
  http://www.BROADBANDreports.com/FAQ/6905

• My Atheros AR5007 802. 11b / g wireless networking with Windows 7 does not work (works with Vista) and had two HP & Microsoft support tech, they could physically turns on (Soft Touch button) by driver, can you please help?

  He used to work under Vista, not working (not able to turn it on) wireless adapater. But when Win7 starts upward, it turns on and turns off immediately.

  Hello
  First of all, make sure you use the latest version of QLB. If not, install from below:
  Buttons lunch fast HP here (ver. 6.50.7.1)

  One important thing to keep in mind. Before update no matter what driver, make sure that your first uninstalled old version.

  Try installing this driver and check it works:
  
  Atheros Wirelesss driver for Win7 from HP here (ver. 8.0.0.172)

  When this driver does not solve your problem, try an exits:

  Atheros Wireless here (ver. 8.0.0.225)

  If even this will not work so tell me one thing. You have all colorors of stgrange the button mute or wireless.

  If you want to say thanks to someone just click on Vote as useful (i.e. under each avatar of the user).

  If your issue is resolved, please indicate then your wire is with solution.

• HP Deskjet 3050 - unable to connect to the WPA secure wireless network

  Hello

  My first post here so please excuse any misstep on my part.  I bought this HP Deskjet 3050 a week ago and have since been war with it.  I would be really grateful if someone could possibly give advice on how I can solve this problem.

  I am unable to connect the printer to my secure wireless network, even if the other computers, cell phones, etc. are connected without problem.  I tried WPA, WPA2 and WPA2-Mixed modes with the same failure security. Specifically, the 66% reached Connection Wizard, then displays the error that the wizard can not find/network printer.  If I disable the security, the printer connects very well.

  I use a Linksys WRVS4400N router with firewall and associated firewall disabled settings.  The router broadcasts on 802. 11 g / N mixed mode.

  I install the software provided on the CD for installation on a Windows XP SP3 System.  I confirmed that the PC and the printer are connected to the network are the same.

  The issue as well, if you will allow me: I have not yet tried these drivers, but I see there are any updated drivers for the printer in date from 14/12/2010.  The release notes indicate the improvement of networks, but do not develop beyond that.  Does anyone know if there was a known problem with the connection to secure networks that has now been corrected?

  Finally, just a note that I am partially blind and using a screen on all systems reader.  I'll try my best to be as helpful as I can to please forgive me if I can't find the settings, etc. on screen and sometimes need help for a little more detail.

  Thanks in advance for your help, I really enjoyed.

  Have a nice day,

  All the best for now and take care,

  Hussein.

  It is not the fact that it is impossible, is the fact that this was not done, yet.

  Hello

  first of all, my apologies for the delay getting back to you.  Poor health means that I had little time or want to do great thing on the side of the computer of htings.

  In any case, I am please to say the problem with the HP 3050 failing to connect to my network is now resolved.  There seems to be a bug with the installer, and that seems to include the version the most recent publication Dec 2010.

  To resolve this problem, I did the following:
  1. disable all security for the network options, so it's just an open network.
  2. connect the HP 3050 to the network by using the installation wizard. This time it connected OK for me.
  3. Locate the IP address of the printer.  I used the table of customer list accessed by my router interface. You may be able to get this through the printer on the menu screen, but as I am partially blind, it wasn't an option for me.
  4. Enter the control panel of the printer to http://ip.address.of.printer for example http://192.168.2.108
  5. under Advanced options, configure the network settings, including the password and the Security Protocol.  Don't forget to enter the SSID of the network exactly as it is configured on the router.
  6. apply settings, disconnect from the control panel of the printer.
  7 log in the router configuration panel and re-apply the security options.  Make sure they match these match those entered for the printer.

  I hope it will be useful to others in the same position.

  Thanks again for your time.

  Best,

  H.

• I'm trying to access a wireless network with the password provided for me. I get the following error message

  I'm trying to access a wireless network with the password provided for me. I get the following error message: "the network password needs to be 40bits or 104bits depending on your network configuration. This can be entered as 5 or 13 characters ascii or hexadecimal 10 or 26. "what does this error message mean and how do I address so that I can access the wireless network?

  I use XP Professional with service pack 3. I get this error message every other time I try to log in to a protected wireless network security. I used to not get this message; but, now, it may be impossible, sometimes to call all wireless providers when I might only need for a short period or after hours service opening.

  In addition, it is my computer that requires the network password to be different, not the provider of wireless. A password is given to me who works for other users, but my computer won't let me use it.

  Hello

  I suggest you to visit these links and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/the-network-password-needs-to-be-40-bits-or-104/f3fdc3ee-CB40-4107-A632-082093dcdcb8

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/need-to-connect-to-home-wireless-network-Windows/5bf37a22-cc42-4a0f-9d15-83e780f00123

  It will be useful.

• ERROR WITH "DELL WIRELESS WLAN CARD WIRELESS NETWORK CONTROLLER.

  GOT AN ERROR MESSAGE SAYING "DELL WIRELESS WLAN CARD WIRELESS NETWORK CONTROLLER STOPPED WORKING AND WAS CLOSED" AND NEED TO FIX. WHAT SHOULD I DO?

  Hello

  Actually try updating your driver and check with Dell Support and Forums if necessary.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  Dell - drivers
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Dell support
  http://support.Dell.com/

  Dell forums
  http://en.community.Dell.com/forums/
  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Hi dear, I just set up my connection wireless network with password

  Hi dear,

  I just set up my network with password wireless connection and configure my router on the IP 192.168.1.2. , but to be

  honest im not sure person cannot access my network and record everything I have on my computr.is is it safe? Please tell me know if you

  don't know.

  Hi saba161,

  If you have the security key settings of the wireless network that turns on encryption. With encryption, people cannot connect to your network without the security key. In addition, any information that is sent on your network is encrypted so that only computers that have the key to decrypt the information can read it. This can help prevent attempts to access your network and your files without your permission. Common wireless network encryption methods are Wi Fi Protected Access (WPA) and WPA2.

  Safety is always important; with a wireless network, it is still more important, because your network's signal could go beyond the boundaries of your home. If you don't secure your network, people with computers nearby may be able to access the information stored on computers on your network and use your Internet connection to get on the web.

  Setting up a wireless network
  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to connect to the wired or wireless network.

  wireless network

  OK so my comcast Internet got off because my husband was laid off anyway so now my computer connecting to the tired all wireless network as power ang unplugimg cable everything is hanging Strip tight ideas?

  Hello

  1. are you trying to connect to the home or public network?
  2. what version of Windows are you using?
  3. you receive an error message trying to connect to the network?
  4. What is the brand and model of the computer?
  If you try to connect to the home network, contact the Internet service provider and make sure that the Internet service is activated.
  
  If you try to connect to the public network, try the following methods.
  Method 1:
  Wi - Fi and in Windows network connection issues.
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2: Temporarily disable the security software.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

• Unable to connect to wireless networking

  My Toshiba laptop has been pre-installed with Windows 7 Home premium 64 - bit OS and it worked quite well with the BB wireless. However, the wireless internet was on and turned off in recent weeks, while other mobile devices, such as iphone, ipad, or laptop, in my household had no such problem. The wireless signal was so strong, but the error message always says "unable to connect to wireless networking. It seemed that there was something wrong with the wireless adapter.

  I got a new adapter properly installed TP-Link wireless. Fortunately, it worked; but unfortunately, it worked for less than 24 hours. It was really frustrating that I, like student full time, depended so much on the wireless network card.

  Help, please! Harry

  Hello

  You can enlighten us with:

  -What model do you use (eg..) L300-123)
  -What version of BIOS is installed?
  -WLAN driver do you use?

  All these questions are answered in PC Diagnostics are under Toshiba app folder in the start menu.

  BR

  Tom

• Problems connecting to wireless networks

  Suddenly the laptop (Inspiron 640 m with Dell Wireless card) does not connect to wireless networks.  Wireless card does not appear in the Device Manager list.  Tried to re-download the drivers but still does not work.

  Any suggestion would be appreciated!