connect with us. Choose a network and go online to complete the device setup

Similar Questions

• Internet connection is lost in computer laptop and Xbox when I fill the network.

  Original title: the network bridge is being gay

  well IM one of the problems with my network bridge that I connected to my card built into my laptop and im for my throu xbox wireless bridge the LAN, and unless he is satisfied, I have internet but when I fill my connections he said: no internet access and I can not access the internet on my laptop and now my habit of Wi - Fi allow me to connect to what anyone I don't have the shared option on check and my connection is really horribly slow and its never been this slow before

  Hello
   
  1. when the question is is produced?
  
  2. you remember of any changes to your machine before the question?
   
  I would like you to follow the steps mentioned below
   
  Step 1:
   
  Instead of bridge, you should be able to share the connection from your laptop.
   
  a. Click Start, click Control Panel
  b. go to your network and sharing Center.
  c. on the left side, click on manage network connections.
  d. right click on your wireless network adapter, click Properties, click the sharing tab, mark the tab to share this connection
  e. click on apply, then try to connect to xbox with your ethernet cable, either incidentally, it must be a crossover cable in order to function.
   
  Step 2:
   
  Disable all security software temporarily and see if the problem still occurs.
  
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Trying to copy a video on my DVD recorder via AV connection with adapter. Audio is fine, but no video on the screen

  Trying to copy a video to my iPad Pro on my DVD recorder via AV connection with adapter. Audio is fine, but no video on the screen

  Which sector adapter are you using?  The digital adapter AV output is digital, which is not compatible with analog VCR.

  iOS: on adapters AV digital Apple

• hard drive died. Unable to duplicate. tried to reinstall disk comes with computer and says unable to complete the installation.

  replaced the hard drive.  Reinstall disk and custom factory

  Toshiba satellite a135. hard drive died. Unable to duplicate. tried to reinstall disk comes with computer and says unable to complete the installation. reinstall again. 5 times and still the same.

  Hello

  If you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

• How to burn a cd with mp3s on a disk and make them stay in the order that I put

  original title: I want to burn a cd with mp3s on a disc and have their stay in the order I put them can not be rearranged by windows media player, can develop an option of engraving for that matter?

  I want to burn a cd with mp3s on a disc and have their stay in the order I put them can not be rearranged by windows media player, can develop an option of engraving for that matter?

  Hi Patriotson,

  Thank you for your response back!

  There is no update of the tel. This is normal. Are there additional features added in Windows Media Player, and then she will be notified on the Microsoft Web site.

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• My Vista system trying to download the updates, and it does not complete the download. It is up to "Windowsupdate_00000646" and "windowsupdate_dt000" How do I clear this code to receive these updates?

  My Vista system trying to download the updates, and it does not complete the download. It is up to "Windowsupdate_00000646" and "windowsupdate_dt000" How do I clear this code to receive these updates?

  They are only updated office or all updates?

  For Office updates, usually to pick up the item at the: http://www.microsoft.com/downloads/en/default.aspx

  then manually download and install the same.

  If all updates, perhaps consider the following general tips-

  Option: File of Windows Update agent wups2.dll is incorrectly registered and the registry associated with the Wups2.dll file files are missing.

  Method 1: Save the Windows Update files

  1. Click Start and type notepad in the box start the search.
  2. click on Notepad in the list programs.
  3. copy the following commands, and then paste them into the opened Notepad window:
  REGSVR32 WUPS2. DLL/S
  REGSVR32 STINKS. DLL/S
  REGSVR32 WUAUENG. DLL/S
  REGSVR32 WUAPI. DLL/S
  REGSVR32 WUCLTUX. DLL/S
  REGSVR32 WUWEBV. DLL/S
  REGSVR32 JSCRIPT. DLL/S
  REGSVR32 MSXML3. DLL/S
  4. in Notepad, on the file menu, click Save as.
  5. in the file type list, click all files.
  6. in the file name box, type register.bat.
  7. save the Register.bat file to your desktop.
  8 right-click the Register.bat file, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password or click on continue.
  9. try to reinstall updates.

  http://support.Microsoft.com/kb/958053
  See: method 1: save the Windows Update files

  http://support.Microsoft.com/kb/326253
  Method 5: Registry Windows Update engine files

  http://support.Microsoft.com/kb/971058
  How to reset the Windows Update components?

  Method 2: Download and install Windows Update agent

  Windows Update Agent

  How to get the latest version of the Windows Update Agent to help manage updates on a computer
  http://support.Microsoft.com/kb/949104

  Information for network administrators about how to obtain the latest Windows Update Agent
  http://support.Microsoft.com/kb/946928

  Click Start, click run, click Browse, navigate to the file you saved and click Open.

  Add the switch /wuforce at the end of the command run and then click OK. For example, the command run might look like this: "C:\WindowsUpdateAgent30-x86.exe" /wuforce

  Click run.

  Follow the steps to complete the wizard.

  Important

  To reinstall Windows Update Agent - download the relevant file from one of the links provided above and save it to a drive where Vista is not loaded because the file cannot be launched directly from the root directory of the system.

  Click Start, run, type: "D:\WindowsUpdateAgent30-x86.exe /wuforce" (without the quotes) and press ENTER to install the Windows Update engine.

  Note: There is a space between "D:\WindowsUpdateAgent30-x86.exe" and "/ wuforce.

  D: is the drive where Windows is not installed (IE a flash drive or a 2nd hard drive etc.)

  TaurArian [MVP] 2005-2010 - Update Services

• Password MS Surface has been lost/changed and now can not access the device.

  My wife recently got a tablet of Ms Surface.  Initially, she set his password and was able to use the device without problem.  However, after 2 days of used light, the device does not recognize the password and don't let her diary.  How can solve us this problem so that it can reset his password and access?

  Mario - Sorry for my delay in responding, but I need to retrieve the response that we had found.

  Surface of my wife would not accept his password and if it could not connect to use most of the suggested solutions to 'reset' a password.  We had to do a complete Factory reset by following the following steps (that I found on the Web, and successful):

  The only way to start a complete RESET without signing in Windows is to stop start Windows handle once or twice to get "Automatic Windows repair" to start, as follows:

  1. turn off the device in now the power button for 6-10 seconds

  2. press the power button to wake it up.

  3. once the Surface Logo appears, wait for the indirect "dots" approach to appear and then press and hold the power button for 6-10 seconds to turn the unit off again.

  4. Repeat step 2 & 3 until the Surface Logo appears with the words in saying "prepare auto repair.

  5 recovery Mode turns on.

  6. in the BITLOCKER screen, press "skip this drive".

  7. press on 'Advanced Options '.

  8. press on "Troubleshoot".

  9. press "reset".

  10 tap... "Just remove my files.

  11 reset process will take about 20-30 minutes - and all DATA WILL BE REMOVED FROM the DEVICE.

  When the "reset" process is complete, the OOBE/Start Up Wizard must begin and the customer can complete the installation of their Surface device.

  Please note that we have used this process because
  (1) we could not connect you to the Surface unit AND
  (2) because we had no personal data to save.  If you have any personal data that you don't want to lose, you will need to find another way to reset the Surface.

  I hope this helps.  He has worked for our situation and the Surface continued to operate perfectly since.

  Doug

  PS: Here is the link to the site where this info was initially.
  http://Forum.TabletPCReview.com/Microsoft/53597-unable-reset-refresh-surface-RT.html

  It can also provide answers on other issues with the RT of Surface.

• I'm trying to upgrade to service pack 3 for xp and I get an error message and it will not complete the installation. What should I do?

  I'm trying to upgrade to service pack 3 for xp and I get an error message and it will not complete the installation.  What should I do?

  Hi BartlettNYC,

  Please see the links below, to solve the problems with Window XP SP3.

  Steps to take before you install Windows XP SP3.

  http://support.Microsoft.com/kb/950717

  How to troubleshoot a windows XP SP3 Installation failure.

  http://support.Microsoft.com/kb/950718

  Good luck.

• Whenever I try to install Photoshop, the progress bar is 84% and then quits without completing the installation.  What can I do?

  Whenever I try to install Photoshop, the progress bar is 84% and then quits without completing the installation.  What can I do?

  Please see the download and installation of the below help documents:

  Download cloud creative to troubleshoot and install questions

  Adobe Creative Cloud Desktop App could not be installed error

  Download error, installation or update of Cloud Creative applications

  The problems with the installation logs

  You can also try to download from here:

  Direct download links of Adobe CC 2015 : designer Cloud 2015 release

  Guinot

• I bought the Adobe Acrobat Standard XI and is unable to complete the download because I already downloanded Acrobat XI pro trial.

  I bought the Adobe Acrobat Standard XI and is unable to complete the download because I already downloanded Acrobat XI pro trial.

  Log, activation, or connection errors. CS5.5 and later versions

  Mylenium

• HP Color LaserJet M277n MFP: HP Color LaserJet MFP M277n, no problems with scan to folder network and internet connection.

  I just bought a 277n MFP which I am running wireless. I have problems with:

  1 - the printer is connected to the internet (no problem connecting to the network and printing)

  2 - definition of networks for scanning file (this is how this problem started because I tried to update the firmware)

  1.

  Searched the forum and found some good articles. Tried to restart and change the DNS as shown without success. Other means?

  2. follow-up guide how to set up an SMB shared folder, but without success.

  I shared "\\Johans-MacBook-Pro\users\johan\documents" under OSX and did the same thing in the printer web setup. Even tried with the entrance of my user name and password. When I press 'save and test' I don't have that "the test failed. Try again. »
  Any suggestions?

  Best regards

  Johan

  Hi @Johan84,

  You can use DHCP or an IP fixed, but you will need to set the DNS.

  Disable the IPv6 setting on the printer.

  Go to the printer settings.

  Configuration of the network.

  Network services.

  IPv6.

  Turn the power off.

  These steps should help with scanning to email.

  Let me know. Thank you.

• Connectivity with AT & T-Motorola 3360 and Airport Extreme problems

  Bought a new extreme-Airport (7.7.3) to replace my old AE after 9 years of service.  The installation procedure, but could not get the airport to connect with my modem (Motorola 3360).  Called at & T and they crossed put me the modem in Bridge mode and which seemed to work.  But only temporarily (about 5 hours).  Restart the modem and the airport was not working.  Troubleshooting I tried to plug my MacBook directly into the modem, but even the computer couldn't get an internet connection.  Another call to AT & T and they reconfigure the modem to their end.  After 90 minutes and try everything they could, they have finally admitted defeat and told me that they could not solve the problem.

  However, after a fairly exhaustive search of this forum, seems to be two issues that many people is with Airport extreme.  One is that the modem (in this case a Motorola 3360) is perhaps not fully compatible with the airport.  The AT & T support person was not aware of this until I asked about it, so she did a quick search and was rather surprised to see that there is a lot of people having problems with the Motorola Modem.  She told me that they use no more Motorola modems but ship the 6200 of Netgear.  "All know issues?", I asked.  She sought and, to his surprise, even once, there was.

  So, first question.  Does anyone know a modem that is compatible with the airport or use one that they had to limit problems with?

  The second question prevailing seems to be with the IPv6 protocol.  Anyone know if there are problems with the AT & T IPv6 protocol and the most extreme airport?  I did not disable IPv6 yet to see if that helps.  I thought I'd ask here first.  Couldn't find anything on the AT & T site.

  When I return from the road (great place to go to get away from technology) I will make a new round of full power of all the components and try Setup again from scratch.

  Any ideas or suggestions would be greatly appreciated.  Miss all know profanity.

  Thank you.

  Any other relevant information: 6.3.1 the utility Airport, Airport Extreme 7.7.3, MacBook Pro running 10.8.4, modem Motorola 3360, AT & T high speed DSL, shoe size 11-1/2 wide.

  When you have configured the 3360 as a 'bridge', this would mean that the AirPort Extreme should then be put in place to provide the PPPoE connection service. The airports are not known for their reliability in this type of installation... no matter the type of modem that you can select, so I drop this method as a connection option.

  If you want to keep the 3360... and you have time to experiment... then you can set the 3360 to its original default settings and configure the router from the airport most convenient to connect using DHCP in router Mode of DHCP and NAT.  That will produce what is called a message Double NAT, but maybe it's not of concern on a simple home network, and Apple provides you with the option 'Ignore' the Double NAT, so the airport will display a green light instead a light orange blinking slow.

  You need to try this configuration for a few days to see if the Double NAT will be a problem or not, because it is not possible to predict the effect of a Double NAT on a network... you have to test a few days see how things behave.  If this configuration works well, for you, then you can leave it as what.

  Please note that I do not recommend this type of installation, just suggesting it as an option this work could , if you want to keep the 3360.

  How Double NAT affect IPv6, I can't tell, since I did not use att for several years, and I'm not familiar with their implementation. On wired, IPv6 works fine on the airport with Comcast and Time Warner.  We can provide these parameters for you if want, but have no idea how well... (or if)... they will work with ATT.

  If the installation of Double NAT does not work, your best option would be to go there and get a modem/router or gateway to ATT device and then set up the most convenient airport in Bridge Mode works correctly with the modem/router ATT.  You will turn on the routing of ATT function in this type of installation, but the airport can also produce a signal from the wireless network that you can use.  The modem/router ATT will also provide a wireless signal that you could use for guests, or disable the feature, if you do not need two wireless networks.

  This may also be the best option if you want to configure IPv6 as IPv6 of ATT service must be compatible with the modems/routers and gateways.

• Windows Vista connected online but not shown on network and sharing Center or on the taskbar, leads to other problems

  I have a Dell Inspiron 1520 running on Windows Vista, my router modem is a Motorola SURFboard SBG901. A few months ago on this computer, I couldn't see that I was connected online either from right down icon in my taskbar (it shows just two monitors with an 'x', that when you highlight on he says "not connected, you are currently not connected to any network.")  I don't see it on my network and sharing Center which States: "not connected wireless connections are available." In terms of network it shows that my PC and then the line that has an x on him. If you click the x, or select diagnose and repair, he informs me that all is going well with my computer. If I go to connect to a wireless network, it shows that I'm connected to my network ready. I open one of my browsers and they all work very well, I can access any site without problem. I was not embarrassed with him at the time, but since then I moved into a new House and have a new service and everything, with this motorola modem cable. my new wireless network is a network unsecured, which of course, I want to fix it. I can connect to this network, but I can't access it through Windows properties to make sure. I read the manual of the modem, telling me to connect through an ethernet connection and access configuration manager using the ip address of my router on a browser, but which does not charge or the other. I have other devices (Ipod Touch and PS3) wireless I got other people come computers and they all detect the network but cannot connect to it. Thanks for any help.

  Hello
   
   
  I would like to ask you a few more things.
  1. how many network connections you have created?
  2. are there multiple NICs installed on the computer?
   
   
  Since this is a common problem and many users have solved this problem by using different methods.
   
  This can also occur if you frequently use several type of internet connections such as dial-up, Ethernet and LAN.
   
  As the article below also indicates that there could be multiple reasons for the same.
  The network adapter icon incorrectly displays a red "X" in the window management in Windows Vista network connections when the network adapter is connected
  http://support.Microsoft.com/kb/945925
   
   
  Method 1.
  I ask you to remove any network connection if you have created and then check.
   
   
  Method 2.
  For control please check in mode safe mode with Networking if the problem exists.
  Here's how:

  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to boot mode safe mode of Windows 7 with networking.
  e. when Windows starts, use check and Internet explore if the problem persists.

  For more information, see the articles below.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Troubleshooting in safe mode
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-mode
   
   
  I hope this helps.
   

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Help with error of unidentified network and Teredo Tunneling

  Well guys, this one's a doosey! My computer has recently lost my internet connection and it gives me the network not identified when I try to connect to my WiFi.  I looked into it and found a couple of things different.  One of them being that the Teredo Tunneling driver in my network drivers does not (code 10).  I tried to do a few things to correct what I found on other resources, but they did not work.  At this point I don't know what to do, so I could use some help!

  Here's my ipconfig/all, if this can help!

  Microsoft Windows [Version 6.1.7601]
  Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

  C:\Users\Owner>ipconfig/all

  Windows IP configuration

  Name of the host...: Allens-PC
  Primary Dns suffix...:
  Node... type: broadcast
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless Network Connection 3 Wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Virtual WiFi Miniport adapt #2
  Physical address.... : 9C-4E-36-3C-86-29
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Wireless Network Connection 2 wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Virtual WiFi Miniport adapt
  Physical address.... : 9C-4E-36-3C-86-29
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Intel Centrino Wireless-N 2200
  Physical address.... : 9C-4E-36-3C-86-28
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::e999:dc2e:1673:3164% 13 (Preferred)
  IPv4 address: 192.168.0.100 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: Monday, October 13, 2014 21:27:44
  End of the lease...: Tuesday, October 14, 2014 01:01:19
  ... Default gateway. : 192.168.0.1.
  DHCPv6 IOOKING...: 362565174
  DHCPv6 DUID customer...: 00-01-00-01-19-25-C7-9A-DC-0E-A1-FC-AC-FD

  DNS servers...: 192.168.0.1.
  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Controller Atheros AR8161/8165 PCI - E Gigabit Ethernet (NDIS 6.20)
  Physical address.... : DC-0E-A1-FC-AC-FD
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  C:\Users\Owner >

  Hello Allen,.

  Thanks for posting your query in Microsoft Community.

  I understand that you have trouble connecting to the internet. We will certainly help you with the same.

  I would like to know some more information on this issue to help you better.

  Remember to make changes before this problem?

  In the meantime, please follow the following suggestions to solve the problem.

  For questions related to the unidentified, network please follow the suggestions of Nithyananda J and see if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/network-connection-shows-that-it-is-connected-but/52e60042-2666-4EAF-80be-193b26db10be

  Also, try to Reset Winsock and see if that helps.

  1. Click Start, all the Programs\Accessories and click right on command prompt.
  2. Select ""Run as Administrator " to open a command prompt."
  3. In the windows command prompt , type the following commands:
  Restore the default install WINSOCK entries: netsh winsock reset catalog

  Reset the battery TCP/IP IPv4 default installation. netsh int ipv4 reset reset.log

  Reset the battery TCP/IP IPv6 default installation. netsh int ipv6 reset reset.log

  Reboot the computer. This should help.

  For problems related to network card drivers, where you get an error code 10 in device properties. You can try to follow the steps mentioned in the link below:

  FIX: "this device cannot start" error Code 10 in the Device Manager in Windows

  https://support.Microsoft.com/kb/943104?WA=wsignin1.0

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Registry backup
  http://Windows.Microsoft.com/en-GB/Windows/back-up-registry#1TC=Windows-7

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

• Unable to connect to the wireless network and also impossible to uninstall the network wireless driver

  Original title: wireless network card problem

  

  I have a laptop HP g series.

  I am not able to connect to Wi - Fi. The network symbol that appears at the bottom right does not appear. Solve the problem. He said it was a problem with the driver for the wireless network card. I tried to uninstall the driver, and this is the error I get.

  Hi Jimmy,.

  For a better understanding of the issue, I would need more information on your side.

  1. How do you uninstall the network driver?

  2. What is the number of the model of the laptop?

  This problem could occur due to corrupted wireless network driver.

  If you haven't tried these steps, I suggest to uninstall the driver from Device Manager wireless network and install the latest driver for the wireless network on the site of computer manufacturer.

  Step 1: Uninstall the wireless driver.

  a. Click on the Start button , and then type Device Manager in the Search.

  b. open the Device Manager and double-click the network adapter to extend.

  c. right-click on the driver wireless network which entered and select Properties.

  d. in the window open, click the drivers tab.

  e. in the tab drivers , click the Uninstall option.

  Step 2: Install the latest driver for the wireless network on the site of computer manufacturer.

  HP G laptop support

  See the articles for more information.

  Wireless and wired network problems.

  How can I troubleshoot network card?

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.