I could connect two laptops together via Ethernet cable
You can, but need to run an ethernet cable crossover (null modem). The MST it will not work without a router in the mix
Tags: Windows
Similar Questions
-
Unable to connect to the internet via ethernet cable
Hello. I'm using acer aspire v5 - 431 and my Internet worked perfectly fine this.morning. now, it detects cable the.ethernet. IM using windows 8 and my laptop is only 9 months old. WiFi works perfectly.
Ive restarted the computer laptop, disconnected, did the flushdns doesn't seem to work at.all. pls help! I'm desperate!Found the problem... it seems that it is a problem with my cable LAN/VGA port combo...
Have to buy a new one! so, for now ill stick with wifi! (T_T) -
I want to thank my wifi in another part of the House with an Airport Extreme. But I want to not be connected to the modem main via ethernet cable is it possible?
I put in place already to extend the wifi of my modem still connected to the modem via ethernet cable.
Now I want to be considered on the floor and use it to extend the wifi without ethernet cable
The AirPort Extreme can extend only wireless signal from another router from Apple, so if you want to take the AirPort Extreme on the floor and extend wireless signal, you will need another airport connected to your modem by Ethernet cable router to produce the wireless signal that will extend the extreme on the floor.
Another way of saying the same thing would be to say that if you want to extend wireless using a router from Apple, you'll need two of them do... because AirPort Extreme is not compatible with a third-party modem or modem/router for this purpose.
-
Unable to connect to the internet via ethernet.
Unable to connect to the internet via ethernet.
You have published a statement... is not an issue. You have a question?
Do you mean that you try to use Ethernet for Internet connection? OR are you asking how to connect to Internet if Ethernet is not possible?
-
I have my printer connected to my router via a usb cable. I also have my (Vista) computer connected to the router by ethernet cable. How can I set the computer to print to my printer via the router?
Usually, you need to install the printing software / drivers on your PC, configured / installed specially for a printer "remote" (its an option in the installation of the printer software)
-
For some time, I was not able to access the internet on my laptop without the ethernet cable, but I have no problem with my Ipad. I recently changed my security of Mcfee, for EXAMPLE. Help, please
Hi Lizgill,
You receive messages or error codes?
You can try the following steps and check if it helps:
Method 1:
You can review the article and check if that helps:
Windows wireless and wired network connection problems
Method 2:
You can also temporarily disable third-party security software and the firewall installed on the system and check the issue.
If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program. Please contact the software vendor for assistance in this regard.
Note: be sure to enable the security software on the computer after checking the issue.
-
My photosmart c309g-m is connected to the router by ethernet cable. Can I add?
My photosmart c309g-m is connected to the router by ethernet cable. Can I still add to e-print?
Hello
Is a printer ready ePrint? You can use the home router to access the internet? If Yes and Yes, then you should be able to do.
Kind regards.
-
Unable to connect to the internet without Ethernet cable.
I have a new router, but can't seem to connect to the internet without Ethernet cable. Trouble Shooter diagnostic tells me that "Windows cannot communicate with the device or resource (primary DNS server). I am at a total loss!
Not sure, but this post can help (as seems to be the same or a related problem) - http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/cant-communicate-with-primary-dns-server/9043f785-2f4e-4cc1-adf5-6ba5ca413749?page=1&tm=1388597381623
Good reading and see if it helps.
-
I have a laptop Windows 8 . I want to connect to a new round of windows 7 and transfer the data at least 8 MB/s.
Please send me the procedure to follow. I don't want to share Internet, but want to transfer data.You can do this, but you need a special type of Ethernet cable called a crossover cable. This means the son in the swap position cables so that "send" and "receive" the computer two plugs can communicate.
Learn more here: http://windows.microsoft.com/en-us/windows/connect-two-computers-crossover-cable#1TC=windows-7
-
Connecting 2 HP printers via Ethernet?
Hi, new to the forum. Noticed the badge of 'Day of the Expert' on the HP site and thought it would be a good place to ask. Trying to give as much detail as possible. My apologies in advance if the message appears long
I wonder if someone can provide a walkthrough on how to connect 2 HP printers to a desktop HP via Ethernet with a router/modem configuration installed. #1 printer is a Deskjet 6988; #2 printer is Photosmart c309a; PC is a p6623w of flag recently bought at Wal-Mart and upgraded to Windows 7 Home Premium to W7 Ultimate. I think it's one of the most recent "Slimline" computers with a minimum of available ports and for problems of space (the entire installation is in a bedroom, with most devices and devices on a desk), I can't really plug a USB hub with several sons (and nowhere to put the hub) and connect the stuff. In addition, there are other computers in the House: two laptops, Pavilion dm1z and Pavilion dv6 - 3227cl, respectively and also with W7 (dm1z = W7 professional, dv6 = Home Premium), on which I would use shared printing (but "home group" met with mixed results). DSL modem is a 6100 Westell Verizon's connected to a Linksys router #WRT320N. I consider myself as moderately / intermediate level "techies" and can understand a little how to perform maintenance / installation routine I receive once the steps in a detail 1-2-3 format (preferably with photos and other visuals!) Some specific questions I have, as well as more details on the configuration of the computer, are listed below. Thanks in advance to anyone who can help!
Issues related to the:
(1) physical installation is kind of a "Frankenwerk" configuration, with the wires used devices is more internal (but apparently the standard regarding the adapters Ethernet/USB/ca / go). Am a little confused, however, of what is required when making the connection: have 1 yellow cable plugged into the Ethernet port on the Linksys router and the Ethernet port on the modem. There is also a wire Blue connecting port #1 the Linksys router to the Ethernet port on the desktop. Will I need to buy additional cables to connect the 6988 and c309a, and ultimately, where should I connect all of them?
(2) seems every time I want to try an install (and allegedly to succeed), I later get error messages in the Device Manager MS on a 'WPD file system Volume driver", specifically"this device cannot start (Code 10)." What is the WPD driver and how is it related to the printer (not exactly which), and how to avoid these mistakes in the future?
More details:
WR320N of Linksys (Cisco) (link)
PC: computer laptop dv6 - 3227cl (link) / Pavilion dm1z laptop (link) / Pavilion p6623w Desktop (link)
Printers: Photosmart c309a (link) / Deskjet 6988 (link)
Diagram of the current facility (link) 1650 x 1275 (for display)
Pavilion dm1z-2100: 5 GB of RAM; 500 GB HD
Audio: IDT HD Audio
Wireless: Broadcom BCM4315; Wired: Atheros AR8121
Graphics card: AMD / ATI Mobility Radeon HD 4200
Storage: AMD 780G Chipset; AMD SB700 SouthbridgeYes that's correct... Plug-in - in any random port 2 to 4 is not serious it should be standard.
-
Why can't connect me to Internet Via Ethernet?
Hello
I help set up the iMac to a friend. No problem problem connecting to Internet through WiFi but can not get the connection via Ethernet. Cables checked and ethernet and all are in working condition. Took some screen shots but I'm not good at all with this stuff. Can someone explain where I'm wrong. Of course, it's simple for a person - but not for me!
That's what I mean when I open the network tab:
I'm not with the Mac today so instructions to take with me would be very appreciated.
Kind regards.
Are plug you the ethernet cable directly to one of the ports on the router to the ethernet port of the iMac, rather than through network extensions? If so, and it is not working, you have another ethernet cable, you can try?
If the cable connections are good and it still does not, you can try a reset SMC and NVRAM (PRAM) and then test again:
Reset the management system (SCM) controller on your Mac - Apple Support
-
Unable to connect to the internet via a cable brodband or dsl computer laptop HP pavilion g6
good day to you all...
Please kindly help regarding me my problem... I deleted my local c drive using a third-party gparted application... I did this because I do a partion before I reformat my laptop HP PAVILION G6... then I have already installed windows 7 on my laptop, but my problem now I can not connect to the internet via broadband or ADSL cable... can you please help me find a solution... also, my wifi does not work before and I found the wireless LAN driver here I download yesterday... now wifi works...
Thanks in advance
Hello
Please download the driver from the internet of the HP website steps below.
- Go to the web page software downloads & HP driver for your model.
-
Unable to connect wireless only via Ethernet cable
Changed routers and the ssid of the router of my old man always showed upward. someone suggested online that I have to uninstall/reinstall my wireless adapter. And so I did, but now I can't connect without ethernet cable.
IHAVE it activated by fn + f2 does not always work. I tried to download the drivers through the "Dell drivers and downloads" with my service tag, but nothing has worked.
I use dell inspiron m5040. Help, please. I'll appreciate it
Can anyone help? I can give you some information that you might need. Just ask
-
Satellite 1900 cannot conect directly to the modem via Ethernet cable
I have a Satellite 1900 305 and I can't access internet when it connects directly to the modem cable via ethernet (RJ45), even after doing the procedure of recovery, and before I could. I can work normally and have internet if I connect to the pit of the modem a network hub. Can someone help me with this problem?
Hello
If I understand you correct you a trying to connect your laptop via Ethernet to a router or Modem or anything else, which is connected to the internet.Well it be, that the cable you a way to make this either a cable crossing of files?
Good bye
-
Tecra A8 - unable to connect to the Internet via a cable
Hello!
I can't connect my laptop to the Internet via cable. The laptop does not recognize when I put the cable. Recognize only the wireless connection.
Can someone tell me, what is the right software that I need to install in order to have cable internet?
Hello
Normally you n t need a software to connect to Internet or router. You should only check the TCP/IP settings. This means that if you have a router that supports DHCP default settings should be allowed, otherwise, you will need to set static IP addresses. It s based on your router configuration.
What OS do you have right now?
Is the OS installed Toshiba now or another OS?You can also try to update the network driver which can be downloaded from the Toshiba page.
Maybe you are looking for
-
collected addresses address book don't be displayed more
-
Envy for computer laptop 15-ah000na: unknown device ACPI HP envy 15-ah000na REF: M9F50A
Hello Just installed new HDD for a laptop client. And a clean install of Win10 HP Envy 15 laptop Model: 15-ah000na Part number: M9F50A #ABU No. SER: CND52867SJ The usual controls and following all Windows updates I have 5 unknown as devices below.
-
Hello I have shoped a 15-p030ne HP Pavilion Notebook PC and install windows 7 64 x in it. then start downloading drivers from HP.com but after installing all the drivers, bluetooth and Wireless does not work because there is no wireless and bluetooth
-
How to remove rootkit.win32.zaccess.c?
Have no chance with most antivirus applications... I guess this question comes up repeatedly.
-
Unable to connect XP laptop to my wireless network. Diagnotics says 'error trying to validate the Winsock base providers' couldn't get cable or Internet.