Connection between the script and view

Similar Questions

• test connectivity between the FI and SAN

  Hello

  could I do fc fabric interconnect working in changing CF ping and if I could tell me please how?

  and if I couldn't how can I check the connectivity between the FI and Netapp storage

  Thank you

  Make sure that you have enabled the FC zoning to the VSAN profile.

  Ahmed

• Connection between the computer and the external hard drive stopped during the backup

  The connection between my PC and my external hard drive has been accidentally cut while I perform a backup. Since then I reconnected my external hard drive to my computer and come back again.

  Windows continue my back up where it left off, or he adds a new point backup on my external hard drive?

  Hi Brandon,.

  Thanks for posting your query in Microsoft Community.

  I would like to inform you that, if the backup is interrupted and it is asking to start the backup. Then, you will need to perform a new backup.

  Reference: back up and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows/back-up-restore-FAQ#1TC=Windows-7

  It will be useful.

  Let us know the status, we are happy to help you further.

• Connection between the monitor and the Studio 1458 laptop seems broken

  After happily using my Dell Studio 1458 for a little over a year, all of a sudden my laptop screen went completely blank (not black, but a sort of grey empty) when I started yesterday. I have reset several times, I let it run and I heard the sounds of standard Windows startup. Since I assumed the laptop worked again very well, and I plugged an external monitor. I am now using the laptop with this external monitor and everything except the monitor to the laptop works very well.

  I can still go to "change screen resolution" and see the laptop screen correctly detected by Windows. I can turn it on by selecting "extend these screens. I can also change the screen resolution on the laptop screen. It's the same kind of gray white whatever I do. Of all this I conclude, there is nothing wrong with the drivers: the more likely culprit seems to be the link between the laptop and the screen of the laptop. Unfortunately I ran out of warranty three weeks ago so I don't know what are my options here. I started to disassemble the laptop to see if maybe I could plug a cable loose once more, but I got cold feet at halfway when I remembered that I had saved not properly all my files.

  Any ideas on how should I proceed?

  Thank you

  Johannes

  This would mean it's time to start trying new parts - cable first.  If that does nothing, try a new inverter (if the screen is CCFL).  If it's backlit by LEDS, try a new screen.

• RoboHelp5: Connection between the project and subproject

  I have a master project and four sub-projects that all reside in a flat directory; in other words, the main project folder and all subproject files are at the same directory level. Can I combine the projects very well, but when I try to add a hyperlink to a topic in the main project of a subject in one of the subprojects, the link disappears when I compile the main project.
  
  I searched for the answer adobe and found a page describing the 'link between merged WebHelp projects', but the instructions say to put the files from subproject in the main project directory. I keep a set of available test only projects for practical things on without breaking my work today and tried it. I could not create merged using this method in all projects the. The link of the merged project appears in the table of contents, but when I met the main project and seen the results. merged projects appeared.
  
  Any ideas on how I can combine projects * and * create hyperlinks between the master and subprojects? Thank you.

  Ok. It worked, and I didn't have to change the structure of Active Directory or create a master project that is devoid of content. Basically, my project composed of five projects... a master project and four projects that are merged into the hand. All project files are on the same level of directory.

  The key to creating a hyperlink between a subject in a project and a topic in another project is in the table of contents:

  Type the text in the topic you want to turn it into a link
  Derivative of this text
  By clicking on the hyperlink icon in the toolbar
  Next to the link, click on the arrow down and select Remote topic in the menu
  Navigate to the project's CHM file you want and double click it.
  If you get a notification dialog box indicating that the files of theme with spaces may cause remote subject links do not work, click OK (in the future, I will have to create the topic filenames without spaces)
  In the select a remote topic dialog box, select the name of the topic you want to link to, click OK and click OK again.

  I know this is fairly elementary to most of you, but I thought that document my steps might help someone like me who is facing the same situation.

  Thanks again.

  -Travel

• Connection between the laptop and desktop computer

  Hi I have a Tecra 8000 Windows xp pro, is it possible that I can connect the mobile to my PC, which runs on windows xp family, that is the reason for the transfer of material, from one to the other, is there a likely with different windows problem! I have a dvd drive on the laptop, but not on the PC! someone help please.
  cordially aga151

  You need a crossover cable. This cable is designed for a direct connection between two units. The cable is cheap and you can find it in every store in PC.

• Essentials blocks Connection between the printer and the computer wireless

  trying to connect a printer wireless via the router and the computer. He won't let that happen. called Canon and they said as essentials of security that blocks by ports not opening. or something like that

  trying to connect a printer wireless via the router and the computer. He won't let that happen. called Canon and they said as essentials of security that blocks by ports not opening. or something like that

  I'm moving your question on the forum of Windows for the hardware and the drivers as you have noticed that the problem is not in MSE.

  -steve

• Get a connection between the printer and router wireless

  I have a printer e-all-in-one HP Officejet 4630 I am trying to install wireless.

  I got when I first installed the printer a few months ago, but have since had to change my password for network security and am now unable to get the printer to accept/meet the new password.

  I downloaded and followed the instructions provided by the tool for troubleshooting HP, without success. I have a DLINK wireless router and use windows 7. Would appreciate assistance.

  Easy things first.  Reset the printer to the factory settings and try to connect again using the Setup Wizard of the façade.  If no joy, temporarily remove the password for the security of the router and try to connect.  If so, go back and add your password.  If no joy, reset the router is by default and reconfigure return, and try again.  Blue wireless light should be lit when connected.

• No connection between the computer and the digital camera.

  Tried to download from camera to the computer. After I connect my digital camera to the computer using the usb cable, said digital camera looking for a connection. I never get a guess that the cause I can't go any further. What I am doing wrong. I looked in my computer and the camera seems to be there.  First, he tries with this camera. I have a HP and HP M305 camera.

  You send messages in Forum Vista and you're missing to this effect on the experience of the current users of XP.

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP
  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

  I gave you the original link will show also a lot more updates and drivers for XP also.

  Software & Driver Downloads
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=410648

  To start Devmgmt.msc type device manager in the Start Menu / RUN box.  Make sure that the camera is fixed when you look in the Device Manager.

  Troubleshoot: Windows won't recognize USB hard drive / fix unassigned drive letter
  http://www.TechSpot.com/VB/topic122125.html

• Issues of security in the connection between the customer and provider of flex property

  Hello

  I should probably know this, but the customer is concerned about a security problem.  I do not think that

  that is a problem, but its best to ask and be sure.

  In my flex client, I got a dialog box where a user can enter a password.  I then take the password

  and send it to my supplier of the property.  This normal text password, I don't do anything to encode it before sending

  It's on.  Is this ok? I think that the connection is secure, but please confirm this, or should I encode them before you send it?

  Thanks for the info

  Cathy

  Yes, the data Manager API using secure AMF channel.  Even if your plugin called java service, you must use "/.../messagebroker/amfsecure" for the channel of proxy URI as shown in the SDK examples.

• No connection between the camera and

  Nothing happends when I plug in the cable to my Canon IXUS 8601 S camera to the computer.  The camera is OK. Always worked before. I just downloaded the latest version of the Norton virus control,
  What is the reason?

  Nothing happends when I plug in the cable to my Canon IXUS 8601 S camera to the computer.  The camera is OK. Always worked before. I just downloaded the latest version of the Norton virus control,
  What is the reason?

  =======================================================
  Perhaps the following links will propose a few ideas:

  Windows Vista
  How to make photos of
  my camera to my computer?
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-get-pictures-from-my-camera-to-my-computer

  Windows Vista-
  How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  Windows Vista-
  Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista-
  AutoPlay: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Is it posible to allow access between the host and virtal machine without wired network?

  I want to use my laptop to show him that I did in the virtual work to other people at my home.

  However, the laptop is ofen not allowed access to the network in their office.

  Is it posible to allow access between the host and virtal machine without wired network?

  VMware player

  My virtual machine is filled to the physical network adapter and use the static IP address.

  Brad

  Setting of the virtual machine: filled

  Change that to each host only (what Continuum called VMnet1) or NAT (VMnet8).  Both use a separate virtual NETWORK card to connect the physical computer virtual host, independent of any NETWORK adapter on the host.

  ... Since the machine host (win7) could not get IP, ping fail to VM (192.168.1.5)...

  Because the connection between the guest and the host is through a separate NETWORK card, you must use the 'other' IP address.  Access a prompt on the host computer and type IPCONFIG to view the IP address of VMnet1 and VMnet8 NIC.  Then use this IP address instead of 192.168.1.5.

  And when you have changed the network management modes (i.e. of bridged to host-only), Windows does not automatically renew its IP address.  The virtual NETWORK card uses a different subnet if you need to renew your DHCP lease or change your static IP address to work with the new subnet.

• My connection between my PC and the Internet.

  MY CONNECTION BETWEEN MY PC AND THE INTERNET.

  I sent a message yesterday - don't know if I got a response.

  My question is that something is wrong with my internet connection.  He died in line every 4-10 minutes of use.  I bought a new computer because my technician told me that I had a bad virus on my PC.  But now I have a new PC but my problem remains.

  Can what tests I do to see if the problem is with my wireless router, the Arris modem provided by Comcast, or something else.

  Please help me.

  Dave Fox

  my main email is , but I think I have the address of e-mail as .  so when you meet me you you the man or the other.

  But please reply to this email.

  You have the same problem if you connect directly to your router?

• What is the difference between the output of the Script and the result of the query?

  Hello gurus,
  
  In Oracle SQL Developer, during the execution of a select statement running with the "F5 key", I get the output of the Script; And then if I execute the same select statement using 'Ctrl + Enter', I get basically the same data, but it is formatted to be a little different. and using 'Ctrl + Enter' I can adjust and reduce the size of the column (not the logical and physical structure) on the GUI screen to display all columns without having wide apart. What are the advantages/disadvantages to running queries using "F5" or "Ctrl + Enter"? If someone could shed some light on this topic bit, that would be nice.

  HI HAS LUNS,

  Text (f5) is functional, for the better or for the worst dumps select all.
  Chart is prettier - you get a complete data by select grid and scroll within the grid.
  There are a few other minor differences.

  Personally, I use mostly f5 /text/ (sqlplus emulation).

  -Turloch
  Team SQLDeveloper

• What are the relationships between the logging and IKM?

  What is the best method to use in the following scenario:
  I have about 20 tables with the large amount of data sources.
  I need to create interfaces that join the source tables in target tables.
  The tables are inserted every few seconds with about hundreds of thousands lines.
  There may be a gap of a few seconds between the insertion of different tables that could be attached.
  The source and target tables are on the same Oracle instance and schema.
  I want to understand the role of: 'Logging CDC' and "IKM - incremental" and
  How can I use it in my script?
  In general, what are the relationships between "Logging" and 'IKM '?
  Use both? Or maybe it's better deelte and insert the target tables?
  
  I want to understand what is the role of "Logging CDC"?
  Can 'IKM - incremental' work without "logging"?
  Must 'Logging' have PK on the tables?
  What should I do if I can't say PK (there may be several identical lines)?
  
  Yael thanks in advance

  user604062 wrote:
  Hello
  Thanks for your quick response!

  No probs - its still fresh in memory I did a major project on this topic last year (400 tables, millions of lines per day (inserts, updates, deletes), sup-5 minute latency). The problem is it isn't that well written on the web, that you have read the blog of the example I linked to in my first answer? See also here: http://odiexperts.com/changed-data-capture-cdc/

  Always on logging:
  My source table is inserted all the time.
  The interface to join the source table in the target table.

  In ODI, the correct term would be your source table "fits" in the table target, unless you mean literally that want to join the the source with the taget table table? My question if you want to do with the result of the join?

  What exactly the "journaling" CDC updates?
  It updates the model of ODI? interfaces? The source of data in the model of ODI? The target table?

  Logging CDC configures and deploys the data capture mechanism (Triggers or log based capture, IE Logminer/streams/Goldengate) - it is not updated the model as such, she pointed out the metadata of the model of ODI repositoty as a CDC data store, allowing you, the developer say ODI to use log data if you wish (reported in the interface) There is no change in the target table, you get an indicator of metadata (IND_UPD) against a line during the integration (in C$ and I have tables$) that tells you if its insertion (I) and update (U) or deletion (D). It had ' lines allow you to synchronize the deletions, but yoy say its inserts only then you probably used use this option. "
  So the only changes are the source table to your interface, another diary data (if you use logging) or the table of the actual source (if not using the logging).

  This is the main thing that I don't understand!

  I hope I made a little clearer.

  Try the following as a quick test:

  Reverse a source table an engineer and the target (at least) table.
  Import the update incremental LKM and IKM.
  Import of the JKM you want to use.

  Create an interface between the source and the target without any deployed JKM.
  Configure the options of JKM on the model, the "Start log" to start the process of capture - this is quite a complex stage and a lot of things to understand what is happening in the source database, better to check code ODI sends to the database and to review the documentation of Oracle database for a description of what his weight (instantiate Tables (, sets of creating change, creation of subscribers etc. establishment of newspaper groups, creating views Journalising etc.) -you will need to consult your Source DBA database initially as ODI wants to make many changes to the source DB (in mode Archivelog process max, parallelism, size, Java etc.)

  Now, edit your interface and mark the table source for use "Journalized data bank.
  Restart your interface
  Compare the difference in the generated code in the journal of the operator, see the differences of the operator.

  >

  Thank you, Yael