test connectivity between the FI and SAN

Similar Questions

• Connection between the computer and the external hard drive stopped during the backup

  The connection between my PC and my external hard drive has been accidentally cut while I perform a backup. Since then I reconnected my external hard drive to my computer and come back again.

  Windows continue my back up where it left off, or he adds a new point backup on my external hard drive?

  Hi Brandon,.

  Thanks for posting your query in Microsoft Community.

  I would like to inform you that, if the backup is interrupted and it is asking to start the backup. Then, you will need to perform a new backup.

  Reference: back up and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows/back-up-restore-FAQ#1TC=Windows-7

  It will be useful.

  Let us know the status, we are happy to help you further.

• RoboHelp5: Connection between the project and subproject

  I have a master project and four sub-projects that all reside in a flat directory; in other words, the main project folder and all subproject files are at the same directory level. Can I combine the projects very well, but when I try to add a hyperlink to a topic in the main project of a subject in one of the subprojects, the link disappears when I compile the main project.
  
  I searched for the answer adobe and found a page describing the 'link between merged WebHelp projects', but the instructions say to put the files from subproject in the main project directory. I keep a set of available test only projects for practical things on without breaking my work today and tried it. I could not create merged using this method in all projects the. The link of the merged project appears in the table of contents, but when I met the main project and seen the results. merged projects appeared.
  
  Any ideas on how I can combine projects * and * create hyperlinks between the master and subprojects? Thank you.

  Ok. It worked, and I didn't have to change the structure of Active Directory or create a master project that is devoid of content. Basically, my project composed of five projects... a master project and four projects that are merged into the hand. All project files are on the same level of directory.

  The key to creating a hyperlink between a subject in a project and a topic in another project is in the table of contents:

  Type the text in the topic you want to turn it into a link
  Derivative of this text
  By clicking on the hyperlink icon in the toolbar
  Next to the link, click on the arrow down and select Remote topic in the menu
  Navigate to the project's CHM file you want and double click it.
  If you get a notification dialog box indicating that the files of theme with spaces may cause remote subject links do not work, click OK (in the future, I will have to create the topic filenames without spaces)
  In the select a remote topic dialog box, select the name of the topic you want to link to, click OK and click OK again.

  I know this is fairly elementary to most of you, but I thought that document my steps might help someone like me who is facing the same situation.

  Thanks again.

  -Travel

• Connection between the monitor and the Studio 1458 laptop seems broken

  After happily using my Dell Studio 1458 for a little over a year, all of a sudden my laptop screen went completely blank (not black, but a sort of grey empty) when I started yesterday. I have reset several times, I let it run and I heard the sounds of standard Windows startup. Since I assumed the laptop worked again very well, and I plugged an external monitor. I am now using the laptop with this external monitor and everything except the monitor to the laptop works very well.

  I can still go to "change screen resolution" and see the laptop screen correctly detected by Windows. I can turn it on by selecting "extend these screens. I can also change the screen resolution on the laptop screen. It's the same kind of gray white whatever I do. Of all this I conclude, there is nothing wrong with the drivers: the more likely culprit seems to be the link between the laptop and the screen of the laptop. Unfortunately I ran out of warranty three weeks ago so I don't know what are my options here. I started to disassemble the laptop to see if maybe I could plug a cable loose once more, but I got cold feet at halfway when I remembered that I had saved not properly all my files.

  Any ideas on how should I proceed?

  Thank you

  Johannes

  This would mean it's time to start trying new parts - cable first.  If that does nothing, try a new inverter (if the screen is CCFL).  If it's backlit by LEDS, try a new screen.

• Connection between the laptop and desktop computer

  Hi I have a Tecra 8000 Windows xp pro, is it possible that I can connect the mobile to my PC, which runs on windows xp family, that is the reason for the transfer of material, from one to the other, is there a likely with different windows problem! I have a dvd drive on the laptop, but not on the PC! someone help please.
  cordially aga151

  You need a crossover cable. This cable is designed for a direct connection between two units. The cable is cheap and you can find it in every store in PC.

• Essentials blocks Connection between the printer and the computer wireless

  trying to connect a printer wireless via the router and the computer. He won't let that happen. called Canon and they said as essentials of security that blocks by ports not opening. or something like that

  trying to connect a printer wireless via the router and the computer. He won't let that happen. called Canon and they said as essentials of security that blocks by ports not opening. or something like that

  I'm moving your question on the forum of Windows for the hardware and the drivers as you have noticed that the problem is not in MSE.

  -steve

• Get a connection between the printer and router wireless

  I have a printer e-all-in-one HP Officejet 4630 I am trying to install wireless.

  I got when I first installed the printer a few months ago, but have since had to change my password for network security and am now unable to get the printer to accept/meet the new password.

  I downloaded and followed the instructions provided by the tool for troubleshooting HP, without success. I have a DLINK wireless router and use windows 7. Would appreciate assistance.

  Easy things first.  Reset the printer to the factory settings and try to connect again using the Setup Wizard of the façade.  If no joy, temporarily remove the password for the security of the router and try to connect.  If so, go back and add your password.  If no joy, reset the router is by default and reconfigure return, and try again.  Blue wireless light should be lit when connected.

• No connection between the computer and the digital camera.

  Tried to download from camera to the computer. After I connect my digital camera to the computer using the usb cable, said digital camera looking for a connection. I never get a guess that the cause I can't go any further. What I am doing wrong. I looked in my computer and the camera seems to be there.  First, he tries with this camera. I have a HP and HP M305 camera.

  You send messages in Forum Vista and you're missing to this effect on the experience of the current users of XP.

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP
  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

  I gave you the original link will show also a lot more updates and drivers for XP also.

  Software & Driver Downloads
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=410648

  To start Devmgmt.msc type device manager in the Start Menu / RUN box.  Make sure that the camera is fixed when you look in the Device Manager.

  Troubleshoot: Windows won't recognize USB hard drive / fix unassigned drive letter
  http://www.TechSpot.com/VB/topic122125.html

• Issues of security in the connection between the customer and provider of flex property

  Hello

  I should probably know this, but the customer is concerned about a security problem.  I do not think that

  that is a problem, but its best to ask and be sure.

  In my flex client, I got a dialog box where a user can enter a password.  I then take the password

  and send it to my supplier of the property.  This normal text password, I don't do anything to encode it before sending

  It's on.  Is this ok? I think that the connection is secure, but please confirm this, or should I encode them before you send it?

  Thanks for the info

  Cathy

  Yes, the data Manager API using secure AMF channel.  Even if your plugin called java service, you must use "/.../messagebroker/amfsecure" for the channel of proxy URI as shown in the SDK examples.

• Connection between the script and view

  I was seen by default budget should be periodic, and real for a YEAR. How to interpret it?

  Usually you specify the view anyway, so by default has no effect.  For example, "data extract" periodic offer / CDA / default scenario as three options.

  Are you sure that the person saying "Default View... "talked about the dimension of the view? Budget reports are most often (by default) presented as periodical data more 'Total year' and perhaps quarterly or semi-annual subtotals.  Actual expenditures appear more often for a YEAR.  Actual expenditures and Budget are compared, it is common to have six columns: three for the month underway (i.e. recurring) Budget / actual / Variance and three others for CDA Budget / real / Variance.

  Your question has been here a while unanswered so far.  I think maybe it's because the question can be understood in different ways and people don't want to waste time answering the wrong interpretation.

• No connection between the camera and

  Nothing happends when I plug in the cable to my Canon IXUS 8601 S camera to the computer.  The camera is OK. Always worked before. I just downloaded the latest version of the Norton virus control,
  What is the reason?

  Nothing happends when I plug in the cable to my Canon IXUS 8601 S camera to the computer.  The camera is OK. Always worked before. I just downloaded the latest version of the Norton virus control,
  What is the reason?

  =======================================================
  Perhaps the following links will propose a few ideas:

  Windows Vista
  How to make photos of
  my camera to my computer?
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-get-pictures-from-my-camera-to-my-computer

  Windows Vista-
  How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  Windows Vista-
  Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista-
  AutoPlay: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Is it posible to allow access between the host and virtal machine without wired network?

  I want to use my laptop to show him that I did in the virtual work to other people at my home.

  However, the laptop is ofen not allowed access to the network in their office.

  Is it posible to allow access between the host and virtal machine without wired network?

  VMware player

  My virtual machine is filled to the physical network adapter and use the static IP address.

  Brad

  Setting of the virtual machine: filled

  Change that to each host only (what Continuum called VMnet1) or NAT (VMnet8).  Both use a separate virtual NETWORK card to connect the physical computer virtual host, independent of any NETWORK adapter on the host.

  ... Since the machine host (win7) could not get IP, ping fail to VM (192.168.1.5)...

  Because the connection between the guest and the host is through a separate NETWORK card, you must use the 'other' IP address.  Access a prompt on the host computer and type IPCONFIG to view the IP address of VMnet1 and VMnet8 NIC.  Then use this IP address instead of 192.168.1.5.

  And when you have changed the network management modes (i.e. of bridged to host-only), Windows does not automatically renew its IP address.  The virtual NETWORK card uses a different subnet if you need to renew your DHCP lease or change your static IP address to work with the new subnet.

• My connection between my PC and the Internet.

  MY CONNECTION BETWEEN MY PC AND THE INTERNET.

  I sent a message yesterday - don't know if I got a response.

  My question is that something is wrong with my internet connection.  He died in line every 4-10 minutes of use.  I bought a new computer because my technician told me that I had a bad virus on my PC.  But now I have a new PC but my problem remains.

  Can what tests I do to see if the problem is with my wireless router, the Arris modem provided by Comcast, or something else.

  Please help me.

  Dave Fox

  my main email is , but I think I have the address of e-mail as .  so when you meet me you you the man or the other.

  But please reply to this email.

  You have the same problem if you connect directly to your router?

• OK to mix 'of connection to the switch"and"close relay switch?

  Hi all

  I'm developing a test sequence using the card multiplexer 2527 to the track signals.  To configure the card, I use DAQmx switch functions.  In my application, I have a Subvi routine that imports the data from a spreadsheet Setup and run a loop for to set the configuration for each step (each iteration of the loop contains the channel for 2527 card information).  The topology is set on the first iteration, as well as the configuration of the path to the first string.

  My concern is this: I need to close the extra channels/relays without changing the topology or resetting the device.  In the first round, I use "connection to the switch" function to set the initial path, (ch0 to com0 for example).  Then in subsequent iterations of the loop, I use "Relay close switch" function to close the additional channels individually (for example k2).  In the end, when the measure is taken, both ch0 ch2 must be closed and routed to com0.  This implementation is so sure, or am I somehow to make the adjustments to the initial loop?

  I would like to test this with the hardware, but it is not yet available.

  Also, I realize that I could use independent topology and configure all relays individually for each step, but I hope that my approach will be easier and safer.

  Please notify.  Thank you.

  GSinMN

  Hello GSinMN,

  It's OK to mix 'of connection to the switch"and"Close relay switch"If you understand what's happening below. "Switch Connect" connects two channels by closing a path of relay between the channels, then "Close relay switch" can be used to change the State of the individual relays. If you are not careful you can mess up your connection by activating / deactivating relays that are part of the route connecting your channels.

  "Also, I realize that I could use independent topology and configure all relays individually for each step, but I hope that my approach will be easier and safer."

  I would recommend the topology independent if you want to stick with connections to channels only. http://zone.NI.com/reference/en-XX/help/375472G-01/switch/2527_independent/

  Initial connection:

  CH0-> pcom0

  pcom0plus-> icom0plus

  pcom0minus-> icom0minus

  icom0-> com0

  In each future iteration just connect to the next to pcom0 channel (which will be indirectly connect it to com0):

  CH1-> pcom0

  CH2-> pcom0

  ...

  ...

  Jarrod

• Relationship between the list and ListField...

  Hey people of Java...

  I can't thank you enough for your answers because I'm really starting to "grok" the paradigm of Java.

  Another came today I'm having problems understanding I deconstruct this app MemoryDemo...

  In the screen of the demo is these two lines:

  Get and display the list of customers.
  _customerList = CustomerList.getInstance ();
  _customerListField = new MyListField (_customerList.getNumCustomerRecords ());

  Well, now I understand the first line perfectly. She develops an object with the contents of the customers it contains.

  The second line calls a custom ListField routine that I show below:

  the final private class MyListField extends ListField
  {
  public MyListField (int numEntries)
  {
  Super (numEntries);
  }

  }

  Here is the part that I don't understand:

  It seems to appeal to both the MyListField() and the super() is simply the NUMBER of elements required, but not * that * list to use.  Exactly how is MyListField() or super() knows how to use the list of customers?  I ask because this exact routine is used a few lines more later (in the part of the main screen) to do the same thing for a list of the records of the order - even once without any reference to which list to use.

  It doesn't seem to be an explicit connection or the relationship between the _customerList and ListField is building.  Is somehow deconstruct '_customerList.getNumCustomerRecords ()' to its root and use _customerList somehow?  I don't think that I changed the call to this:

  _customerListField = new MyListField (_customerList.getNumCustomerRecords ());
  _customerListField = new MyListField (PICK_A_NUMBER);

  Where the constant is: public private static final int PICK_A_NUMBER = 50;

  And he ALWAYS displays a list of customers (though now with only 50 files).  How to do know?

  Thanks in advance!

  -John

  "I guess that somewhere in the interior architecture of the ListField, he knows that he has to paint the whole - one at a time - when put on the screen - that's it."

  Fix.

  This is the great thing about ListField.  It attracts only those who are on the screen.  If you use ListField draw a list of 10,000 rows (I tested), and it will only extract and draw the 10 that he needs.

  "Again, I don't find any explicit loop where it is through each element and then calling drawListRow()."

  Good yet once, it is not there.

  "Maybe one day I'll be able to pay it back here."

  It would be great.