Connection Internet drops after 15 minutes 7 windows

Similar Questions

• Connection Internet drops several times every 5 to 15 minutes

  Connection Internet drops several times every 5 to 15 minutes.  It is an old ASUS week ultrabook computer that is running Windows 7 Home Premiuim.  The problem is not the network as 4 other wireless computers work properly. Also, same problem is observed on the other two networks.  Only change in the computer as he received is the addition of Kapersky anti-virus and Microsoft Office 2003.  Problem seems to be with Windows 7.  The yellow triangle of death appears on connection bars when the problem occurs.  Disconnect and reconnect the Internet solves the problem for another 5 to 15 minutes.

  It seems to me that it is a possible driver with the card built into your new laptop wireless. You can consider using Device Manager to check to see if there are problems reported with the wireless adapter. Also, I suggest that you visit the manufacturer of the laptop and get the latest available wireless drivers for that brand and model.

  You could also have a hunt in the event log and see if there is any additional details that might shed some light as to why the wireless network has decreased. That his fall is one thing, but the log events might suggest a few reasons for this.

• H323 incoming call drops after 5 minutes each time

  Hi people,

  Can you shed any light on this please?

  H.323 incoming call (numbering by IP)-> external F5-> Fortinet Firewall-> internal F5-> internal firewall-> VCS - E-> VCS - C-> autoattendent MCU

  The call drops after 5 minutes into the call, every time. We tried H.323 call to an internal endpoint, it falls as well. Looks like there is a value of the time-out period defined somewhere on firewall he or F5?

  Any suggestion is appreciated!

  concerning

  Chenzhe

  I hope this helps:

  http://www.Cisco.com/c/en/us/TD/docs/Telepresence/infrastructure/article...

  1. Term applied to network connections through the firewall limits. For example, a Cisco PIX firewall can have a timeout of the form control:

     timeout conn 1:00:00 udp 0:02:00 h225 1:00:00 h323 2:00:00

     (i.e. a list of names of Protocol recognized each followed by a timeout in hours, minutes, and seconds). This example requires a limit of 2 hours on the H.323 connections; However, it also imposes limits on the other protocols, which would also affect a video call (UDP and H225). Several different network protocols are involved in an IP video call. The call being demolished may cause a delay applied to all of them.

• You Tube goes all warbley after 4 minutes from Windows 8.1 installation, why?

  I bought a new Windows 8 two years ago, and then they have updated to Windows 8.1. After 4 minutes, something usually playing on You Tube, it gets static warbley & mess the rest of the time. Please fix this because he has never done that on Windows 8.

  I can't even redirect to the Firefox forum, OP using Chrome.

• Internet connection is lost after 2 minutes

  In our House there are 4 teenagers - all with laptops, iphones, BlackBerry, etc.

  We have an internet connection to BT home hub.

  Everyone can connect OK except 1 latop - if using WiFi, laptop connect only for 2 minutes and he then loses the connection to the internet.

  The only way to get a WiFi connection again is to reboot the router.

  The laptop works fine when connected with an RJ45 LAN cable - problem only occurs if you use the WiFi.

  The laptop has Windows XP and Internet Explorer 8.

  The icon on the watch of the taskbar that the connection to the router is OK, and varies from excellent to mediocre according to how far the laptop is located rom the router.

  Why do I have a problem with this machine - I guess that it must be related to XP as all other machines have Vista or 7.

  Hello Gavin Duffy

  It may be possible but not likely.
  1. the system that only stays connected for 2 minutes, this problem only occurred after the settings have been changed in the router?
  2. did you check with your son that only security settings have been changed in the router?
  3. have you checked to see if this system is undergoing the same questions on other networks such as Café, the bookstore free networks or network of neighbors (the permission that they allow to connect)?
  Try to remove the wireless network profile and recreate.
  If you use 'Wireless Zero Configuration' to manage your wireless network, go to the network connections folder ("" Start > run ", type ncpa.cpl and click OK"), make a right click on the wireless network connection, select Properties, and then click the wireless networks tab, where you can highlight and then 'remove' an existing profile.
  After that you have removed, reconnect to your network and test to see if the problem still occurs.
  Thank you.

• Why all my games connected is minimizing after several minutes of use in Windows 7?

  I tried compatibility mode. He has not made a difference.
  It happened not under Vista.

  Two operating systems are the Ultimate 64 bit versions

  Any ideas would be greatly appreciated.

  Using AVG? If you are, that's why. Try to use the fashion game, or roll back to AVG 8.5 or using another AV

• Internet disconnects after 5 minutes

  Hi I was using my PC for a long time. I went for the weekend, and when I came back, I got a problem.  Every 5 minutes or so internet stops working.  There is no notification that a cable has been disconnected.  When I type something in the address bar it keeps loading but the page never comes to the top.  It is not my hardware or ISP because I started another operating system (fedora) and it worked fine. A temporary solution that I use is to disconnect and reconnect the eithernet cable.  But then the problem occurs again in 5 minutes.

  Things I've tried:
  1. disable internet card
  2. set a static ip address
  3. release ip/renew ip
  4 uninstall internet card
  5. restart the router

  Hi AppleWilliam,

  Thanks for posting. The first thing we must do is to determine where the issue is in fact. This could be a problem with a piece of hardware, Internet Explorer, Windows or your ISP.

  First when the problem occurs again do the following.

  Type the following command:

  IPCONFIG/ALL [Note that there is no space between the oblique and ALL bar].

  Right-click in the command window and choose select all, and then press enter.
  Paste the results in a message here.

  In the same command prompt window, identify the DNS and gateway (it will look something like ... default gateway: 192.168.1.1 and DNS servers...: 192.168.100.54 )

  Now in black comand prompt, type the following command:

  PING 192.168.1.1 (by replacing your IP of the gateway here) [Note that there is no space between the oblique and ALL bar]
  Let us know if you get the response or timeouts.

  Also again once in the same window type the following command

  PING 192.168.100.54 (by replacing your DNS IP here) [Note that there is no space between the oblique and ALL bar]
  Let us know if you get the response or timeouts.

  If the answer then you can have a problem with your web browser. If you are using and other Web browsers with test and see if you have the same result.

  If you do not get a response, test with another computer if possible to see if the problem persists there. If the problem does not occur on the other PC, then check your network cable connected to the PC and see if there is a link light. If there is a clear link then try to replace the cable and see if the problem persists.  If the problem persists after replacing the cable with a known good work. If the problem persists with a good cable to work known so try another port on the router or switch.

  I hope this helps. Please let us know if any of these steps did or did not solve your problem.

  .

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Belkin F6D4050 v2 USB Wireless Adapter turns off after 5 minutes using Windows 7 Home Premium 64 bit

  I recently bought a wireless adapter Belkin for use in my Media Center PC in the living room. The router I use is also a Belkin N + Router. The wireless adapter will connect to my WPA encrypted network, but it will stop working after about 5 minutes or more. The State of the connection is going to say "No network detected." The icon shows a strong signal with a yellow bang next to it. It takes a hard reboot to get it working again. Take out the USB port and put again does nothing. The icon remains the same, but he won't let me not make a right-click or left-click on the icon. When you try to stop, the computer turns off completely; It gets stuck on the "Shutting Down" screen.

  I disabled the option in the settings to get to power adapter down to save power. I thought that this would fix it, but still the adapter is not connected.  My Dell laptop gets a signal stronger than this card, and there is also no problem to stay connected to the router.

  Any help would be appreciated on figure out how to get the card working properly.

  Hi brutus09,

  Welcome to the Microsoft Answers site!

  That the connection is lost intermittently, the issue seems to be with the drivers.

  As for now I suggest to uninstall the drivers for the wireless adapter and download the updated drivers from the manufacturers website and see if it can solve your problem.

  Access the link below to download the driver for the Belkin Wireless card.

  http://en-us-support.Belkin.com/

  1. go to the control panel and, under "Programs", select "uninstall a program".

  2. Select, then uninstall "Belkin Wireless card driver" from the list.

  3. disconnect the adapter.

  4. using another PC or via an temporary Ethernet, download the latest driver from the link above.

  5. run the executable downloaded on the computer, connect the adapter when prompted target.

  6. connect to your wireless as usual. If you have an encryption key, you will need to enter again by reinstalling the driver should solve the problem

  Warning: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  Let us know if it works very well, or for any further assistance.

  Concerning
  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

• No Internet access after the update from Windows 7

  Since the update of Windows 7 (from my list of update I can not single out one specific) sent 15 Dec - my computer will access my internet connection - the only way that I can access is to do a system restore to a point to Dec. 14 or before - I have a new computer - and no new programs have been added to the system during this time - it becomes troublesom because I have to constantly to do system restore to get online

  I called Support Center, Monday - and after having him work for almost 2 hours, we decided that the KB2467659 update is the culprit and we have disabled this update to be installed - HOWEVER the windows update program was H - LL BENT on installing this update - the technician called me back 2 days later Wednesday--and we did other things magic to ensure that this implementation to day has NOT been installed again - so far (knock wood) No recurrences of the problems

• VN7 - 591G - may depend on internet sharing after the update to windows 10

  As I said that I can't turn on the sharing of the internet after I upgraded my Nitro V 10 Windows, it says "wireless card driver doesn't support the AP." I have updated the wifi driver, but still have the same result...

  I tried installing the windows version 8 of the driver and got good results
  It is compatible and that you have not noticed problems

• EXTERNAL VIDEO CONFERENCE DROP AFTER SECONDS

  Salvation;

  I have a MSD 15.3.0 version and TMSXE 5.3,
  I have a wooded area, with:
  10.5.2.10000 - 5 CUCM
  PRESENCE 10.5.2.21900 - 4
  TMSPE: 1.7
  CONDUCTOR: 4.2
  NŒUDS EXPRESSAY: 8.6 (EXP-E clusters and cluster EXP - C)
  TELEPRESENCE SERVER: 4.2 (4.23)

  Salvation;

  When I create a new video conference using the SCHEDULER INTELLIGENT or CMR, an external user cannot stay in a conference, this connection is dropped after every seconds.  In my vts newspapers exist the message below, where information this close due failure invitations SIP call.

  274 2016/09/12 16:47:47.768 SIP Info call 10.254.0.30:42033
  "" 16:47:47.771 275 2016/09/12 call APP Info 21: incoming new SIP call of '[email protected] / * /"
  276 2016/09/12 16:47:47.953 calling APP Info 21: "FABIO 2s" has now joined Conference "Reuniao Agendada 09/12/2016 16:24.
  277 2016/09/12 16:48:09.340 calling APP Info 21: stopped contributing video, now contribute audio only
  Time from NTP Info 278 2016/09/12 16:48:10.706 is my Sep 12 16:48:10 2016
  279 2016/09/12 16:48:16.058 SIP Info call 10.254.0.30:42033
  "" 2016/09/12 280 16:48:16.061 calling APP Info 22: incoming new SIP call of '[email protected] / * /"
  281 2016/09/12 16:48:16.098 calling APP Info 22: "Leonardo Silva" has now joined Conference "Reuniao Agendada 09/12/2016 16:24.
  Appeal of error SIP 16:48:23.743 282 2016/09/12 22: close call due to failed invitations
  283 2016/09/12 16:48:23.743 call CMGR Info 22: disconnection, '[email protected] / * /"-service not available".
  284 2016/09/12 16:48:23.745 calling APP Info 22: shoot call them from "Leonardo Silva" - destroy at request end. not available
  SIP 16:48:23.835 285 warning call 2016/09/12 22: unable to close successfully the dialogue with BYE
  286 2016/09/12 16:48:31.937 call CMGR Info 21: disconnection, '[email protected]/ * / '.
  287 2016/09/12 16:48:31.937 calling APP Info 21: shoot call them "Fabio 2s" - destroy at request end. remoteTeardown
  

  I have check all information in othe Detective Conan in this forum: https://supportforums.cisco.com/discussion/12294701/telepresence-server-...

  I made recommendations, but with IX Protocol disable SIP PROFILE DRIVER and MEETING ALIAS, the same error occurs. My maximum size of incoming messages is updated to be 11000.

  Internal Conference is going on normally.

  Any idea?

  Best regards;

  Fabio Santos

  I've seen some similar behaviour in the past - on trunk SIP pointing to the highway, try to uncheck the "SRTP allowed" and see if it works.

• Wireless network connection drops every few minutes after windows update.

  Original title: dropped internet connection

  I had trouble with my laptop give up wireless connection.  Received a patcha and everything was fine until the last windows update auto.  Same problem again.  I have to constantly reset the wifi.  I run a diagnosis and I get the message that the wireless adapter has been corrected, but it won't always stay connected.  VERY frustrating.

  Hi Ccolvin3,

  Windows can be disable your network adapter to save power. Disable the power saving option in the network adapter properties. To do this, try the following steps.

  a. Click Start, type devmgmt.msc and press to enter.
  b. in the list of objects, expand network adapters.
  c. double-click the sub element that means wireless network cards.
  d. click the power management tab.
  e. uncheck all options on the power management tab.
  f. apply the settings, and then restart the computer to check the difference.
   
  We recommend that you also download and install the latest driver for the card from the device manufacturer's Web site or system wireless.
   
  Download and install the latest service pack on the computer. See this article for more information:http://support.microsoft.com/kb/935222
   
  Check out these links for more information:

  Solve problems, find wireless networks:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Wireless connection is periodically lost:
  http://support.Microsoft.com/kb/814080

  Wireless network connection drops every few minutes:
  http://support.Microsoft.com/kb/814123

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• I connect to the internet via the modem broadband datacard. After 2 minutes, the tab displays like this 'exception unknown software exception (0xc00000fd).

  Svchost.exe - application error

  I use windows xp professional edition. I connect to the internet via the modem broadband datacard. After 2 minutes, the tab displays like this
  "The exception unknown software exception (0xc00000fd) occurred in the application at location 0x5b8787ad.
  Click OK to terminate the program
  Click on CANCEL to debug the program.

  If I clicked on ok and cancel, it disconnects Internet. the message again after the computer restarts and the connection with the internet. and also the internet Explorer does not open I tried several times but it doesn't work. What can I do to slove this problem. Please help me.

  Hello

  ·          When the issue started?

  Step 1: Try to scan the computer using Antivirus software because this problem can occur if the computer is infected with the virus. You can use the Microsoft Security Analyzer by clicking on the link: http://www.microsoft.com/security/scanner/

  Note: once a virus is removed, you will need to reinstall some software, or restore lost information.

  Step 2: Check if the problem persists in Mode without failure.

  A description of the options to start in Windows XP Mode: http://support.microsoft.com/kb/315222

• Explorer Windows restarts after a minute arriving at log on screen or if I connect quickly the dialogue windows Explorer unhandled 0x00000000 in explorer.exe exception States: after repair of Windows XP running.

  Windows Explorer restarts after a minute arriving at log on screen or if I connect quickly the dialogue windows Explorer States of exception unhandled 0x00000000 in explorer.exe: 0CX0000005: reading location access violation) X 00000000 Code: 0XC0000005, flags: 0 x 00000000 after you run Windows XP repair. Repeated repair Windows now for the third time, repair works OK but always produces the result above!. Initially, ran SFC/scannow, he ran very well modified some files but has not fixed the problem. Now I can't run Sfc/scannow in administrator mode in a repair console or environment (cmd) receive error "Windows file protection could not initialize the scanning of protected files. The specific error code is 0X000006ba [the RPC server is unavailable]. Can not access services through msconfig in safe mode, no available tab. When I click on Control Panel in safe mode, I get an error but control then window opens I can access to the services window, but as soon as I click on any service Windows Explorer plunges a black screen with only the white inscription SafeMode visible in each of the corners. When I try to access the sound module in safe mode, I have an error message and he abandoned me in safe mode desktop. Have no tab restore field in system restore to create a system restore point. In safe mode do not log off, restart or shut down (only windows explore drops leaving the black screen with text in each corner indicating the computer in safe mode, no recorded parameters.) Tried to run scanreg.exe & scanregw.exe run, cmd, mode console repair but command is unrecognized. When I tried to run all these commands using BartePe, the States of error cannot access raw disk. In safe mode, I can access the first level for example my computer folder, but when I double click on the c drive or any other drive nothing happens!

  Access msconfig, run, cmd, Device Manager, uninstall programs etc. in safe mode.

  I can easily re - install a new OS on the C partition, but I like challenges! Is there anyone with the skill out there who can offer suggestions for this mother of all XP flaws? (apart from the installation of a new version of Win XP)

  Hi Semi_Tech,

  Step 1: Start the computer and use the Recovery Console to check for errors
  a. see to start the computer and use the Recovery Console
  b. at the command prompt, type chkdsk /f /r and press to enter.

  Step 2: We recommend that you check if the RPC Server service is running.
  a. Click Start, click Run, type services.msc and click ok.
  b. in the list of services, double-click RPC Server service.
  c. change the startup type to automatic and click on the Start button.
  d. click ok to apply the changes.

  See if the steps mentioned by '- MainFrame -' can help you to:
  See windows SFC file protection could not run a scan of protected system files

  Step 3: Check if you can start the computer in safe mode
  a. see the description of the options course in Windows XP Startup Mode
  b. connection to the administrator user account and check if the problem persists.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• After the upgrade to windows 8.1 internet connectivity is delayed

  I have a new HP 500-164, it came with Windows 8.0 loaded.  Everything worked fine and I got to the Internet as soon as the computer has started.  However, after that I upgraded to 8.1 Windows it now takes 3 to 4 minutes for connectivity internet attatin.  I downloaded and installed the new NIC Qualcom drivers but still had the problem.  I reloaded Windows 8.0 and the problem disappeared, so I know it's specific 8.1 window.  Any suggestions?

  Hello

  Ethernet or wireless?

  Try to install the posted Windows 8 network drivers.