Connection of printers to the MediaSmart Server

Similar Questions

• How can I keep a connectivity when the DNS server is not available?

  We have remote locations with several computers that are joined to our domain via a gateway to gateway VPN. When VPN breaks down, they lose the connection to our CD/DNS server. Their ip addresses remain the same, since they are managed by their local router but they failed to connect to other devices to their location even though the devices have static IP addresses. If I understand the use of the LMhosts file must allow me to allow them to keep local communications between computers. I think the entry in LMHOSTS should be like this for each local machine they need to access.

  10.0.0.1 SampleEntry #PRE
  Is there a better way to solve this problem, however?

  Hi Jim,

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, you have a problem with connectivity indomain computers when the DNS server is not available.

  As the computer is connected to the domain network, the question you posted would be better suited in the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

  Hope this information helps you. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence.

• Machine of clinet connection to the mail server

  Hello world

  I have a very annoying problem with my client computer to connect to the mail server. I followed the instructions have benchmarking Guide, but when I try to connect my client to the mail server, I get the following error message:

  A domain for the mailserver0 domain controller could not be contacted.

  I tried full and short for mailserver0, the deactivation of my other network interface (I have two on the client machine), but kept getting the same error. I would appreciate if someone can help me solve this. The 'details' are:

  The following error occurred when DNS was questioned about the resource record (SRV) service location used to locate a domain controller for the domain mailserver0:

  The error was: "the DNS name does not exist."

  (0x0000232B RCODE_NAME_ERROR error code)

  The query was for the SRV record for ldap. TCP. DC._msdcs.mailserver0

  -The DNS SRV records to locate a domain controller for the domain are not registered in DNS. These records are automatically registered with a DNS server when a domain controller is added to a domain. They are updated by the DC at set intervals. This computer is configured to use DNS servers with the following IP addresses:

  172.18.0.22

  192.168.1.10

  -One or more of the following areas do not include delegation to its child zone:

  mailserver0

  . (the root zone)

  What output this command on the mail server:

  netstat - o - n a | findstr /i listen | Findstr: 53

  There should not be a firewall on the mail server.  If there is turn it off.

• MediaSmart server EX490 HP

  It seems that the network adapter has failed in the MediaSmart server.  I tried to connect to the server on the network and using a crossover, cable and the connection keeps linking, drop, then connection then, abandoned ad-nauseam.

  Hello johntweir,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand you are having problems connecting to your MediaSmart Server. I'm sorry, but to get your question more exposure, I suggest posting in the trade forums, since it is a commercial product. You can do the business community of HP Enterprise - servers.
  
  I hope this helps. Thanks for posting on the HP Forums. Have a great day!

• Incorrect response from the SOCKS server deploy when debug_token.bar

  I created the debug_token.bar

  and try to deploy it to the device. (Device Manager blackberry can recognize the device)

  I called

  / Motion Developer/SDK/Research\ In\ / BlackBerry\ 10 WebWorks\ SDK\ 1.0.4.5/dependencies/tools/bin/blackberry-deploy - installDebugToken /Users/myname/debug_token.bar 169.254.0.1 - password mydevicepassword

  After 2 or 3 minutes, it reported:

  Error: Unable to connect: incorrect response to the SOCKS server. Check the settings of IP address for the target. Try to ping the target.

  I ping peripheral ip to 169.254.0.1

  He responsed:

  Ping 169.254.0.1
  PING 169.254.0.1 (169.254.0.1): 56 data bytes
  64 bytes from 169.254.0.1: icmp_seq = 0 ttl = 255 time = 2.406 ms
  64 bytes from 169.254.0.1: icmp_seq = 1 ttl = 255 time = 0.881 ms
  64 bytes from 169.254.0.1: icmp_seq = 2 ttl = 255 time = 0.803 ms
  64 bytes from 169.254.0.1: icmp_seq = 3 ttl = 255 time = 0,869 ms
  64 bytes from 169.254.0.1: icmp_seq = 4 ttl = 255 time = ms 1,080
  64 bytes from 169.254.0.1: icmp_seq = 5 ttl = 255 time = 0,848 ms
  64 bytes from 169.254.0.1: icmp_seq = 6 ttl = 255 time = 0,823 ms
  64 bytes from 169.254.0.1: icmp_seq = 7 ttl = 255 time = 1,175 ms
  64 bytes from 169.254.0.1: icmp_seq = 8 ttl = 255 time = 0,893 ms
  64 bytes from 169.254.0.1: icmp_seq = 9 ttl = 255 time = 1,130 ms
  64 bytes from 169.254.0.1: icmp_seq = 10 ttl = 255 time = 0,860 ms
  64 bytes from 169.254.0.1: icmp_seq = 11 ttl = 255 time = 0,819 ms

  even though I checked ndk ide, the device has been connected

  He likes without any problem, but cannot deploy token

  Welcome to any comment

  Have you tried to deploy from the NDK since it is able to connect?  It could be using the connection, prevents your order manually run to connect.

• In recent weeks, I can not connect to my HP MediaSmart Server.

  In recent weeks, I can not connect to my HP MediaSmart Server.  My network do not see even if it is connected to my router.  Everything I tried was no chance.   At this point, I just want to get in there, so I can recover my files.   Any help is very appreciated.

  original title: HP MediaSmart Server.

  Hello

  I recommend you post the question in the Windows Home Server forum.

  http://social.Microsoft.com/forums/SK-SK/category/WindowsHomeServer

• WANT to 114 does not connect to the Web server

  Have installed a 114 WANT, everything works except for the webservices - wireless eprint etc.

  I tried everything-

  1 re-install services - error cannot connect to the web server

  2. Update - error cannot connect to the web server

  3 give the static IP address

  4 restore the default settings

  I have an internet connection on all computers.  Can someone give me a hint on how to get Web services to work?

  Hi sbenzie,

  How your printer is currently connected to the network? Via Ethernet or wireless? What is your current router / network configuration? That shows your printer because it is the IP address? What happens when you try to launch applications?

  Not yet given the information above, here's what I would try.

  I suggest to reconnect the printer to the network by running the Wireless Setup Wizard and attempt to restart the web services. If this is not enough, you may change some DNS settings in printers EWS (built-in web server) to do this, put the IP address in a browser window on your PC.

  This should start the integrated Web server. In SAP, select the network on the network tab, select 'network '.

  Then select "network address" (IP). Do not change the IP configuration at the top. Go down under "DNS address configuration"and select 'Manual DNS server'. " Under manual DNS server, enter (an 8 in each box on the first line) 8.8.8.8 and 8.8.4.4 on the second line. Press the button 'Apply' at the bottom.

  Now try to connect to Web Services again.

• RV082 with QuickVPN can connect to the Windows Server but not on Ubuntu Server

  We have a RV082 and are capable of using QuickVPN to connect and access our work LAN (192.168.0.0) except that we can not connect to a Linux Ubuntu Server on the local network.  Can ping (and shared access) servers Novell, a Windows 2003 server and several printers but not the linux server.

  192.168.0.1 Novell server can ping

  192.168.0.2 Server Linux ping or you connect

  192.168.0.3 Windows 2003 server can ping and connect

  192.168.0.4 - 11 different printers that I can ping and install

  I can ping and connect to the server using PPTP-Linux

  Troubleshooting tips will be greatly appreciated

  Good afternoon

  Review of your question, it would seem at first glance that the Ubuntu Server may be blocking incoming VPN traffic. I'm not sure of what firewall program you have chosen to use with your server Ubuntu, but make sure the ports 500, 4500, 443 and 60443 are open to traffic entering this subnet. If you can detect all the errors showing blocked traffic trying to hit the server, which can be useful in allowing us to determine why this traffic does not go through.

  Thank you

  -Lindsey

• Unable to connect to the VPN server

  Hello

  I'm on Sierra, iOS macOS 10 and Mac OS Server 5.2 (on a Mac mini).  (All dated September 21, 2016)

  Because PPTP is no longer supported, I am trying to create L2TP.  Unfortunately, when I try to connect to the server, I get the error "the VPN server has failed. Please check the server address and try to reconnect. »

  I do not think it is a problem of networking: back to my Mac is not enabled, the appropriate ports are transmission (UDP 500, 1701, 4500) and server says that the service is accessible.

  When I check the logs from the server after a connection attempt, I find:

  21/09/16 21:08:09.994 raccoon [75993]: can't find configuration.

  21/09/16 21:08:13.285 raccoon [75993]: can't find configuration.

  21/09/16 21:08:16.578 raccoon [75993]: can't find configuration.

  21/09/16 21:08:19.884 raccoon [75993]: can't find configuration.

  Any suggestions?

  Does anyone know where the configuration file is supposed to be on the server, so I can look at?

  Thanks for your help!

  Hi Rick,

  -Check that the folder/etc/racoon exist and the folder contains psk.txt and racoon.conf.

  -Installed with the operating system.

  Cheers, dwbrecovery

• failed to connect to the SMTP server

  I can't send mail in ThunderBird sometimes. I use 31.5.0 version but I was wrong this problem in older versions either.

  It is said:
  "The message could not be sent because the server name of the SMTP server connection failed. The server is may be unavailable or refuses the SMTP connections. Please check that your SMTP server is correct and try again, or else contact your network administrator. "

  Sometimes, every time. But really bad situation for me. It happens with hotmail, gmail and with my own email accounts. For the time being. It sends to all accounts except for Hotmail. I tried not in http://kb.mozillazine.org/Connection_errors_-_SMTP , but there is no change.

  Could you help me please abou this problem?

  Is - this smtp.live.com which does not send?
  Try this:

  SMTP.live.com / 587 / TLS

  Authentication the same as POP3 (username and password)

• We have two profiles on our DELL. A profile is now show this message - "the proxy server refuses connections" - when trying to connect to the internet.

  A user can connect internet - no problem, but other user gets - 'the Proxy Server is refusing connections. Emails are good all around. Have checked the settings, but can find no solution.

  Network proxy

  Type of topic: preferences< enter > in the address bar.

  Select Advanced > network.
  Search for configure how Firefox connects and then press the settings button.
  Check the settings.

• The proxy server refuses connections

  My Pc has a virus and trend helped me to remove, but now whenever I connect to Fire Fox set-aside notification appears
  The proxy server refuses connections
  Firefox is configured to use a proxy server refusing connections.
  Check the proxy settings to make sure they are correct.

  Contact your network administrator to make sure the proxy server is working.
  

  You can check the connection settings.

  • Tools > Options > advanced > network > settings
  • https://support.Mozilla.org/KB/Options+window+-+advanced+Panel

  If you don't need to use a proxy to connect to internet, and then try if "use the system proxy settings", select "Not of Proxy" or one of the others do not work properly.

  See "Firefox connection settings:

  • https://support.Mozilla.org/KB/Firefox+cannot+load+websites+but+other+programs+can

• Last update has screwed up to connect to the IMAP server.

  The last update for Thunderbird seems to have changed something so that the connection to the IMAP server. All new messages downloaded but have not read a 'Loading Message' in the status bar. When it finally disappears content downloadable (web related) does not appear. In addition, I can send is no longer emails. The server times out. Worked fine yesterday.

  To diagnose problems with Thunderbird, try the following:

  • Restart the operating system in safe mode with network. This loads only the basics needed to start your computer while allowing Internet access. Click on your operating system for instructions on how to start in safe mode: Windows 8, Windows 7, Windows Vista, Windows XP, OSX

  If the safe mode for the operating system to resolve the problem, there are other software on your computer that is causing problems. The possibilities include but not limited to: AV scanning, virus/malware, background downloads such as updates of the program.

• Why is suddenly unable to connect to the mail server Thunderbird?

  Hello

  I have been using Thunderbird with Linux Mint 16 x 64 for several months with no problems. Today, I got a message saying 'Could not connect to [email protected];. mail server the connection was refused.

  My ISP has access to web messaging that I can connect to. The settings have not changed.

  The firewall on my system is not activated.

  Does anyone have any ideas, what is the problem?

  Thank you.

  There is currently a problem affecting messaging on Virgin Media (i.e. ntlworld). Estimated fix time is 22:30 time of the United Kingdom.

• tried to re set now I can't get past a loading error "the proxy server refuses connections."

  I tried the "reset Firefox" button and now I can't get Firefox it loads. Get error "the proxy server refuses connections." I'm not on a LAN, just a computer at home, how can I fix?

  If you do not keep the changes after a reboot or have problems with preferences, see:

  • http://KB.mozillazine.org/Preferences_not_saved