Connection to any type of Bluetooth or WiFi signal

Similar Questions

• Simultaneous use of Bluetooth and Wifi

  Someone at - it problems with the use of Wifi and Bluetooth (Audio AD2P) simultaneously on the Thinkpad Tablet Android?

  My wifi works fine and my bluetooth works well, but as soon as I turn on the bluetooth, the signals of all the wireless disappear. I'm leaving 3 or 4 "bars" (Fair-good) to not even be able to detect the network. I expect to see a small drop in performance wifi when BT is active, but this is nuts.

  The support people had me perform a factory reset of the recovery console and were surprised when I said that he recovered to Android 4.0.3. (It came with v3.something).

  I'm travelling for work, so set up next to an access point is not an option, but last week I got the USB port repaired, did the OTA update and bought a headset, so there are a lot of variables, which I am trying to nail.

  Any help is appreciated! If you guys could see how things work on your tablet, it would be useful.

  Well, I understood what was going on. When my machine was sent for repair, one of the antenas was connected to the connecting antenna badly on the wireless network card.

  Manual maintaince a poster model of what to look for connections, like not concorde with text that describes how the repair. The text is correct, the image is probably only be used as a reference. When I corrected the connections, I have better strength of the WIFI signal and resolved conflict bluetooth/WLAN.

  I'm güssing this isn't a problem with the machines of most people, but maybe something interesting putting warned about the maintenance technicians.

• iPhone 6s cannot detect Canon camera wifi signal

  6 s iPhone, OS 9.3.2. This phone cannot detect any Canon EOS 6 d wifi signal after that I turned on the wifi of the camera. My previous phone iPhone 6 has been able to detect it.

  You can try the following steps

  On your Canon 6 d:

  1. go to WiFi settings

  2. turn on your Wifi

  3. go to the WiFI function

  4. Enter your nickname

  5. Select connect to the smartphone

  6. Choose mode camera access point

  7. Select easy connection and then you will get key SSID & encryption

  On your iPhone 6s:

  Download this app https://itunes.apple.com/us/app/eos-remote/id565839396?mt=8

  1. turn on your WiFi

  2. choose your camera WiFi

  3. Enter the password (the password = camera encryption key)

• Vista not recognize / connect with any Bluetooth device

  Vista not recognize / connect with any Bluetooth device. I have the Bluetooth dongle into a good usb port, the computer recognizes it, but it doesn't show up

  Bluetooth devices when the device will attempt to connect.

  Is that what you would please stand out my answer as the answer to your problem.

  Marked as answer questions don't get a lot of people looking at them.

  Sorry that he had not helped you.

  Once you disable the my answer option, others will look at your problem and we hope to help you.

  See you soon.

• my laptop suddenly stopped to connect to any bluetooth device. I restored my system and removed the programs installed before having this problem.

  my laptop suddenly stopped to connect to any bluetooth device. I restored my system and removed the programs installed before having this problem.

  Hi sh8kdown,

  Thanks for posting this question in the Microsoft Community!

  I understand that you can not connect to Bluetooth devices on the computer. I'm sorry for the inconvenience caused to you. Rest assured that I will do my level best to help you.

  (1) what is the brand and model of the computer?

  (2) what is the model number of the Bluetooth devices?

  (3) you get an error message?

  (4) did you of recent changes to the computer before the show?

  I suggest the following methods and check if it helps to solve the problem.

  Method 1: Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Troubleshoot issues with Bluetooth devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  (Applicable to Windows 7 as well)

  Method 3: Error: "Pilot of Bluetooth device not found" when you try to connect a bluetooth device: http://support.Microsoft.com/kb/2654568 

  Reference:--

  Add a Bluetooth device to your computer: http://windows.microsoft.com/en-US/windows7/Add-a-Bluetooth-enabled-device-to-your-computer

  Change settings for a Bluetooth compatible device:

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards!

• My iMac does not detect my C309g-m as a scanner via bluetooth or wifi.

  Somewhere between Snow Leopard and 10.7.3, my iMac stopped detecting my C309g-m as a scanner with bluetooth and wifi.  I can still print via bluetooth and wifi without problem, but "print and Scan", "Image Capture", and "Preview" not to recognize the C309 as a scanner.

  I uninstalled the HP Photo Center, but didn't know that there was a 'scrubber' option until after the forums up. Accordingly, I still have the package installed driver somewhere in the interiors of my computer.  It is a 3.3.3 package by car.

  Any help will be greatly appreciated!

  Hello

  As the software was partially removed, please follow the steps below to ensure that pilots are not damaged:

  1. open the Applications folder.
  2. go to the Utilities folder.
  3. double-click on disk utility.
  4 Select the hard disk that contains the boot volume.
  5. go to the first aid tab and select Repair disk permissions.
  Note: This process may take several minutes depending on the Mac and the amount of the permissions that need to be repaired. The journal of the progress will tell you when the process is complete.

  Then, download and install the latest HP Printer Drivers 2.8 below package:

  http://support.Apple.com/downloads/DL907/en_US/HPPrinterDrivers2.8.dmg

  Finally, reset the printing system and reconfigure the printer:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.

  Click on the Apple menu and then click on System Preferences.
  Select Print & Scan.
  Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

  Now, click on the Plus sign and select the pritner listed as Hello in the default tab.

  Now, check if you can scan using Print & Scan or one of the other methods described below:

  http://support.HP.com/us-en/document/c01910186

  It is not supported to scan from the front panel of the printer without a full feature software, so it's expected.

  About Webscan EWS option, the page overview only scanning, in order to save the page scanned, you should right click (CTRL + left click Mac keyboard), then save the file in the contect menu.

  Please let me know any changes during the scan to Print & Scan after installing the package.

  Kind regards

  Shlomi

• How to connect to wi - fi or bluetooth PC usage?

  Hello

  Here's my question.

  I want to write a blackberry application that comminucate with a desktop application.

  Seems they can talk via USB, but it is possible to allow them to connect with WI - FI or bluetooth for

  A WI-Fi/Bluetooth connection are very easy to use a USB cable

  Thanks in advance

  Don't know why not?

  If the networked PC and BlackBerry are connected to a wifi access point to enter this simple network you can do any connectivity between them. Simple build a listener on your PC and use a simple connection on the BlackBerry to the address IP of the PC with Connector.open ("..."; = wifi interface").

  You can also use bluetooth, but I don't know what would be the best way to communicate here. On the BlackBerry, you have JSR82 with series or obex connectivity to achieve this.

• BlackBerry smartphones unable to connect mobile to PC with Bluetooth

  BlackBerry 8520.

  Unable to connect to the PC using Bluetooth, keeps asking: "digital password? Where can I find it?

  I tried to use the PC Bluetooth to find my cell phone, but nothing happens

  Any help gratefully accepted.

  The first time you connect your device to another bluetooth device, it asks you to specify an authentication key. You can make one yourself. Subsequently, the same password will be asked on the device that you connect to. It's just to be sure that you are connected to the device you want.

  So just type what you want, and then the same code will be required at the other end :-)

  I hope this helps...

  Dimi3

• Bluetooth and WiFi 5 GHz - XPS 13 '' Or ''.

  Hello.

  I bought a new Dell XPS 13 edition gold (I think this is the model 9550) 3 days ago and it arrived today. Out of the box, I'm not able to connect to WiFi 5 GHz networks or pair / connect with 2 adapters bluetooth audio.

  When I try to pair with an adapter bluetooth audio by clicking on "Sign in" from the system tray notification Center, I am able to see the pair of devices, but get the error message "Unable to connect" yellow. I tried to connect to a Sony XB950 bluetooth headset and a bluetooth-to-optical audio receiver Belkin HD 955).

  When I try to connect to a Wifi 5 GHz network (using my own Cisco 2702i enterprise access point, or my ASUS RT-AC66U friends), I can see the little icon of WiFi in the bar spots disappear and reappear several times, with a red X over the icon. After flashing several times, I get the error "unable to connect to this network. I can connect successfully to 2.4 GHz networks, but not 5 GHz ones.

  I installed all the updates of Windows and installed all updates through the "Dell Update" utility. This figure includes an update of the firmware. I also tried to uninstall the Bluetooth and Wi - Fi adapters via the Windows Device Manager. The drivers for the two adapters are completely up to date as of this post.

  The "Dell 1802 A" being used for the WiFi and Bluetooth adapter, I think I have a bad adapter? Please notify.

  So after digging for a while, I came across the post following in another Dell Community forum:

  http://en.community.Dell.com/TechCenter/OS-applications/f/4613/t/19634843

  Apparently, the Broadcom WiFi adapter supplied with the new XPS laptops has a boatload of interoperation with WiFi APs and bluetooth devices, reported by many in this thread and the problems this forum as well.

  I took a chance with the WiFi card with the next Intel 7265 card replacement:

  http://www.Amazon.com/Intel-7265-IEEE-802-11AC-Bluetooth/DP/B00RCZ4I6S?ie=UTF8&PSC=1&redirect=true&ref_=oh_aui_detailpage_o01_s00

  And IMMEDIATELY, the problems are solved. 5 GHz connectivity has no problem with ~ 20 gigabytes of data transferred via the connection from installation, and bluetooth problems are also completely missing. I have to say, so shameful, I had to do this with a ~ laptop $1400. It's too late to return this laptop because I have already opened up to replace the card and therefore cancelled the guarantee. I have yet to see any recognition of the problem by Dell, despite many long discussions on other forums on issues specifically affecting the above Broadcom.

  Someone else who chooses to replace the Wifi card, make sure you uninstall both the 'DW WLAN Card' and the bluetooth software "WIDCOMM" of the Control Panel before installing a replacement card.

  Once again, crazy I had to do with such a cheap laptop... I will think hard on the purchase of Dell in the future.

• Firefox will not connect to any Web site. Chrome and IE work fine.

  I use Firefox as my main browser for years without any problem. A couple of days without reason apparent, is no longer connected to ANY Web site. The tab displays indefinitely 'connection '.... "with the circle of rotation. I can use IE and Chrome without any problem. I rechecked the Options-> advanced-> connection to the proxy settings and tried all options but nothing helped. I also started using the safe and still nothing. Also tried uninstalling and reinstalling several times. I'm on version 42.0

  Surely, there must be a way to debug this to understand.

  I use another firewall, so I don't know how operation windows.
  I called the big players to help you. Good luck.

  Type of topic: preferences #advanced< enter > in the address bar.

  Under Advanced, select network.
  Search for configure how Firefox connects and then press the settings button.
  If you use a proxy server, make sure that these settings are correct. If there is no
  proxy, first use No. Proxy. If there is a problem, then try Proxy system.

• Equium A60-199 is not play or recognize any type of cd or dvd

  Hi all

  It's the first time I was in the unfortunate duty position post one problem-normally I can find a solution here and just fix it myself!
  I have an a60-199 on windows XP Home Edition. It is about 18 months and unfortunately out of warranty. The issue I'm having is that the cd rom drive (a carpet * s uj-830) is not play or recognize any type of cd or dvd. Finally, I used about a week ago and have tried resetting the system to forward, then nothing works.

  I also tried the suggestion of microsoft to change IDE transfer parameters, and that no longer works. When I put a disk in it turns three times and the light on the cd drive flashes, but he can't find anything, and I get the message ' d: / is not accessible. the request could not be performed because of an i/o error "I also websearched that but found nothing else than the suggestions above that has not worked."

  Is it possible that the link between the motherboard and cd rom to be broken yet light and spinning cd happen? I am completely confused and would like to have suggestions from anyone!

  Thanks in advance,
  Fyldelass.

  Hello

  Don't reset the system how you used recovery media to set to factory settings? If so, I think that there must be a hardware malfunction. The drive has power and I think that the problem is not connection but damaged drive.

  The drive is original and also compatible with this unit. The assignment of pins is just. Before trying anything, you can try to remove the disc and check the contacts. Maybe they should be cleaned. If nothing helps, I presume that the replacement should be performed.

• 5701ng HP Jet 7: flight Mode is AS WELL AS Bluetooth and WiFi - why?

  My HP Jet 7A (during awhile now, otherwise the whole - not sure how far behind he'll), had the Action Center Flight Mode button 'on' as well as WiFi and Bluetooth on startup in Windows. Flight on this tablet mode seems to have 3 positions after the start and not just on or off. If the flight Mode button is lit with WiFi and Bluetooth as it became after just re-start in the Tablet, if I type a time, flight Mode button stays on (on) and Bluetooth and Wi - Fi will be off (go their gray buttons). Tapping new Flight Mode will make the flight Mode button go off / gray, then Bluetooth and WiFi will come back on - as expected if then, it works as expected but why is airplane Mode on when it starts Windows 10 in the first place.

  Did someone else gets this strange behavior of flight Mode?

  Ago my 8 stream do the same. Airplane mode is highlighted as well as Wifi and Bluetooth (if enabled).

  I went through the fixes as well but no solution. Although Wifi / Bluetooth works fine if the airplane Mode is on or not.

  Its not just tablets of HP for this problem. Seems to be a Windows problem. Maybe MS will come out an eventuntually fix.

• Pavilion 14-ab051tx N4G24PA: unable to connect to any wireless network after the upgrade to Windows 10

  I recently bought a 14-ab-51tx Pavilion N4G24PA, this is my first laptop from HP, it comes with Windows already installed 8.1 and it worked fine.

  The thing is, I kind of get used to using Windows 10 on my previous laptop, so without further hesitation I upgraded to 64-bit Windows 10.

  Here's what I did wrong:

  Instead of update Windows 8.1 for Windows 10, I indeliberately he installed fresh, with couple of mouse clicks, I didn't realize that I also remove the recovery partition.

  I realized only after the installation process is complete, but then it was too late. I look forward to using my laptop with Windows 10 freshly installed inside to make some games just noticed that I couldn't connect to any network without wire, House or public. It recognizes my wifi at home, but the signal bar is bizarre, there is only 1 bar of signal even if the wireless router is only about 10 feet from him, so I checked my other computers and smartphones, but the signal on them is ridiculously high (full bar), it also detects another wireless network that are further away than my wireless router.

  But back to my HP laptop, I tried to connect to my home network despite the signal bar with the right entry security key, but it does not connect, it says "Cannot connect to the network".

  Tried updating drivers with HP Support Assistant and no luck, the problem persists, tried all the solution on the internet, int ip reset, reset winsock, checking and unchecking, always without success.

  Can someone help me please...

  Hello:

  The BOM indicates that your laptop comes with a Broadcom wireless card.

  Have you tried the last W10 driver for this card to support your PC and driver page?

  This package contains the Broadcom Wireless LAN drivers for the laptop models running a supported operating system. Broadcom wireless LAN drivers are required to activate the built-in Broadcom wireless LAN adapter.

  Exit the: December 17, 2015

  Version 7.35.317.0 Rev.A

  File name: sp74241.exe

• How keyboard KG-0793 turned on? It is Bluetooth or wiFi?

  How keyboard KG-0793 turned on? It is Bluetooth or wiFi?

  petermat,

  Excellent information, thank you! The part number of this keyboard is KB. RF403.179, this is a RF keyboard, which means he came originally with mouse wireless (RF) who had a USB adapter that is connected to the mating. If you do not have the mouse that comes with it and that the adapter, it won't be able to be coupled to your system.

• Not connected, you are currently not connected to any network.

  When I'm on the network icon or click on it says "not connected, you are currently not connected to any networks." I know I'm connected but how am I guess sharing media with friends now, it's kind of a big deal for me and I tried to remove the network and then restart and then re-login has always the same thing happens as my security type is WPA2-PSK , but he says WPA2-Personal, when I go to manage wireless networks, I guess that means the same thing so can you help me more im going to upgrade to windows 7 soon and I don't know if he's going to say the same thing, please help.

  Hello

  1. don't you make changes to your computer before the problem?
  2. what type of connection you are using?  Cable?  Wireless?

  Search for related errors in the event viewer.

  Test in safe mode with networkproblem.

  See also: http://windows.microsoft.com/en-US/windows-vista/The-doctor-is-in-Using-Network-Diagnostics-in-Windows-Vista