connection to external audio devices

Similar Questions

• Where to connect an external audio source Qosmio F20?

  Hi people,

  This is the first time I try to connect an audio source (minidisc player) and listen to the recording on this subject by the Qosmio. The same thing has been done many times on the desktop-PC - cable LINE IN of the sound card and everything is OK - sound is audible and I can record or mix it on the PC.

  Unfortunately, the Qosmio seems to have only Mic-Line-In and audio entry it is not through the PA system. This means that I have to by a separate PCMCIA-soundcard to use its line?

  I would gladly appreciate any idea!

  Unfortunately, Yes. The Qosmio does not support line-in audio ports, and so you will not be able to capture audio signals.

  Seems you have to buy an external PCMCIA sound card that supports the line-in port

• External audio device for Tecra A11 - 11H

  Although the Tecra A11 - 11 sound better than most laptops, I would definitely come back to the full sound quality.
  Without any audio output the possibilities seem very limited.
  USB speakers seem to be either very low powered or high-powered, expensive, or boom-box.

  My daughter, a Windows user, has one of those gadgets
  http://www.cclonline.com/product-info.asp?product_id=57743&TID=gsearch
  with its 5.1 speakers and the result is really good (and I already have the same set of 5.1 speakers, currently unused).
  The problem is of course that Creative do not cooperate with the world of SILK.

  Does anyone know of a similar product that works well with Linux?

  There is in alsa:
  EDIROL UA-1000 and UA - 101
  Tascam USB Audio/MIDI ?
  ? interfaces or controllers US-122, US-224 and US-428
  Native Instruments RigKontrol2 ?
  ? * Native Instruments RigKontrol3 ?
  ? * Native Instruments Kore Controller ?
  ? * Native Instruments Kore Controller 2 ?
  ? * Native Instruments Audio Kontrol 1 ?
  ? * Native Instruments Audio 2 DJ ?
  ? * Native Instruments Audio 4 DJ ?
  ? * Native Instruments Audio 8 DJ ?
  ? * Native Instruments Guitar Rig Session IO?
  ? * Native Instruments Guitar Rig mobile ?
  ? * Native Instruments Traktor Kontrol X 1
  all this must work well...

• detection of audio device problem

  operating system detects any audio devices

  Hi Sai,

  Thanks for posting your query in Microsoft Community.

  This could occur because of corrupted or outdated drivers and also due to hardware issues.

  I would like to know information to better understand the question below.

  1 did you changes to the computer or audio settings prior to this problem?
  2. can you see a yellow warning icon in Device Manager?

  See the link below to open the Device Manager.
  http://Windows.Microsoft.com/en-us/Windows-8/where-is-Device-Manager

  3. talk to an external audio device?

  4. What is the brand and model of the audio device and the computer?

  5. is the audio device detected in bios?

  I suggest you update the audio driver in Device Manager.
  See the link below to update the driver.
  http://Windows.Microsoft.com/en-us/Windows-8/all-drivers

  Response with the State of the question, I'll be happy to help you.

• Why my audio midi Setup does not recognize my external midi devices?

  Why my audio midi Setup does not recognize my external midi devices? The midi interface and all midi devices are connected.

  P.S. The icons and the midi interface are all "grayed out" in the midi studio window when I click or double click on it nothing happens.

• Equium P200-1ED is able to power external USB devices connected on it?

  (1) is anyone able to confirm if the Toshiba Equium P200-1ED is capable of powering an external USB device connected to it via one of its 6 USB ports?

  (2) what is the maximum power that the Toshiba Equium P200-1ED can provide only one USB port?

  (3) can the Toshiba Equium P200-1ED providing the power referred to in Question (2) above to each of its 6 USB ports?

  Please don t after several markets on the same subject.
  After you recommend first one:

  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=115025#115025

• IN reading under HDMI output: ATI High Definition Audio device not connected not

  I have a Probook s 4720 with Windows 7 Pro. Connect my laptop to the TV with an HDMI cable worked fine then all of a sudden the next time I did I got no sound and when I right click the icon of audio, I noticed he read ATI High Definition Audio device not connected. It worked once and now it won't, Miss me. The driver is up-to-date.

  Can someone help this grueling 82 year old principal?

  I like to play the old big Bands and numbers Andre Rieu on You Tube.

  Please try download and install the latest driver from the following link, and then reboot the system:

  http://www2.ATI.com/drivers/Beta/amd_catalyst_13.4_legacy_beta_vista_win7_win8.exe

• When I click on the sound in Control Panel, that he told me that no audio device is connected to my computer.

  When I click on the sound in Control Panel, that he told me that no audio device is connected to my computer.

  When I click on Realtek HD Audio Manager it used open.

  Hope someone has a suggestion.

  Thank you

  Kaye

  original title: no sound coming from my speakers

  To everyone

  Thanks for trying to help me.  However, since some of the suggestions seem to me be beyond my capabilities, I decided to take the hard drive to a computer technician.

  It took him an hour to solve the problem.  One of the problems was that the new map, he installed had crushed WMV. He is also turned off user account control.

  Everything works now and I'm very happy, because I had spent the day trying to solve the problem.

  Once again, thank you to all of you who gave me your opinion.

  Kind regards

  Kaye

• No sound from the computer with connected generic speakers VISTA SP2. Symbol pregnant shows active with the Digital Audio device.

  I have vista SP2, I connected to generic stereo speakers using the green light at the back of the computer. Vista does not recognize the speakers. The speaker symbol at the bottom right shows "digital (HDMI) 2 high definition output audio device." It shows active. I had this problem before, and VISTA should pick up 'speakers' something to that effect. I have no sound until it captures "speakers". I can't get VISTA to recognize this. It keeps starting with the digital audio device. Don't know what to do, checked all the forums. It should just pick up these simple generic markets good speakers. Before SP2, I lose sound when VISTA is in standby mode. He would then turn off the stereo speaker and replace the digital output device driver... However since SP2 I can't get VISTA to recognize that I have just connected speakers and not a digital output device.

  Yes, when I uninstalled the driver, THEN shut down the computer and then restarted, he picked up the device high definition audio "speakers" good pilot is NOT the

  "digital (HDMI) 2 high definition audio output device that he used to pick up."

  I now have sound!

  I hope that it stores the right driver now as in the past, when VISTA went into sleep mode, it will disable the speakers, and you have to restart every time.

  Thanks for your help.

  You can add instructions to boumediene, the fact that you must RESTART your computer to search for new drivers, once you uninstall.

• No sound - speakers appear "not connected", cannot uninstall "Audio Digital S/PDIF" device

  Two weeks ago, I used to upgrade my pc version SlimDrivers drivers Win7 Pro.  He installed a "device high definition Digital Audio (S/PDIF) audio" and apparently disabled my speakers hd audio device existing"on where no sound.

  Since I disabled and uninstalled the "Audio S/PDIF digital" (although it seems always in 'his'), located the original speakers of "see the disconnected / disabled devices" and tried to update the drivers for these "speakers" (he pointed out as existing for this device later and correct drivers).  I rebooted several times after uninstalling attempts.

  My speakers (good Canyon market those with power USB and standard 3.5 mm stereo jack plug) work on my other laptop.  I also connected standard headphones to the defective pc, but they don't work no more - nor on the connections front or rear jack output (pale green).

  I tried a system restore to before the updates driver and looked in the BIOS for a disabled person options - no luck.

  The 'stakeholders' always appear as "not connected" with a red arrow pointing down.  Furthermore, I can not test, set them as default device or set them as default communications device.  In "High definition Audio Device Properties", I can open only the driver Details, but no updated drivers, Roll Back drivers, disable or uninstall.

  The "Audio Digital (S/PDIF)" appears as disabled with a black arrow pointing down.

  Are there any good-hearted boffin out there that could help?

  You are welcome.  I'm glad it worked.

  Please check the answers in order to close the debate.

• Computer do not normally sleep wake up and the computer hang when external USB devices are connected

  Hello

  I have a Windows 7 Home Premium 64-bit desktop CyberPowerPC, and there are currently two problems with it:

  1.), I have two USB ports in the front of my case. I am connected to my computer. Then I tried to connect my external hard drive using the USB cable supplied with it, but just at the moment where the end of the USB cable touched the port, the screen is black and automatically rebooted and froze when the display shows the brand CPU that is before the login screen. I actually press the restart on my case button to restart the computer with the hard drive already plugged. Then everything should work normally.

  It's the same thing when I tried to connect my iTouch 2nd generation.

  This problem occurs sometimes, however, but I wonder if someone always has a solution to this?

  2.) whenever I put the computer to sleep and he remains asleep for a while and I turn it on it once again, powers for about 2 seconds then it turns off. I have to turn the power supply and light in the order so he could get out of mode 'sleep'.

  I was wondering if you have solutions to this problem, as well.

  Thank you.

  Original title: new Windows 7 problem

  Ok.. I'll try again...

  The problem is caused by a bad 'ground' between the USB ports of the case and the motherboard. Static electricity is originally the USB device to short on the USB port which is originally the motherboard restart mode.

  I had the same problem and got my computer case exchanged. The problem has not entirely disappeared, and I use the USB port on the front on the card reader, just in case.

  It can also be a problem with the power supply or even the motherboard. It is very difficult to locate the failure without replacing in turn, a process that happens to be a bit expensive.

  The above is the reason why I recommend that you contact the MANUFACTURER. Don't take no for an answer off the manufacturer or supplier. It is a problem annoying which can eventually damage your operating system if it is enough...

• The list of audio devices connected to the operating system has been changed

  Hello, I have a problem with rendering in Media Encoder CC. When I realized the video suddenly a message "THE LIST OF audio devices connected to the operating system was changed. Open Audio hardware preferences? "and rendering are collapsed by increasing the time until infinity.

  Any suggestion?

  Thank you very much.

  

  

  [Moved the Forum of the SOUL of the After Effects - MOD forum]

  Hmmm.  It's very strange.  For the experience, I tried to disconnect a sound card, while the SOUL is coding.  I get the message dialog box, but the encoding continues without stopping.  Eventually, this may be specific to certain sound cards.  What is your sound card that you have on your computer?

  For a workaround, could you try checking the "do not show again" checkbox in the message dialog box next time you see it?  Then, click no you should not see this message again and I hope that this problem would disappear.

• Connection of external devices

  So I don't see Apple still has not added any USB port to the IPad Pro. Y at - he of the adapters that can be purchased? I'm looking to connect an external hard drive to watch the videos when traveling, etc.  Is this possible?

  It is not possible.

  In the workflow of Apple people use internet to download, transfer and disseminate

  In the real world it is not the internet everywhere. However, Apple does not support the transfer cable or streaming of files. However, you can search disks hard wifi enabled and use those. Basically, it's a player who made his own small as you connect your iPad to listen then wifi network. Usually, you access the files via an app on your iPad.

  You can google for "drives hard wifi enabled" and should see some options. Kingston Wi-Drive is an example but I don't know that there are other

• No audio device connected

  My laptop shows no audio device. My laptop worked fine for a few days after the formatting, but this occurred.can problem, someone help me how to slove this problem .i have windows 7 and the dell E6400.i latitude have tried to uninstall and reistalling, but it does not help.

  Hi Ocean,

  This problem could be due to missing/corrupt/old audio drivers.

  From now on, I would ask to refer to suggestions provided by Andre Da Costa in the thread below link and check the status.

  Error message: no audio output device is installed

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Equium A210 will not pick up external audio

  Hello

  When I right click on the volume icon in the taskbar and goto devices on reading
  If I open the recording tab, my laptop completely freezes, don't know why.
  Should have asked months ago but has not used this has many, but needs sorting.

  Also, I noticed that my laptop will collect all outside sounds
  I mean that I normally use a lead with two ends of helmet, one in my stereo
  And the other connected to the laptop in the front, I do the conversion of old Mini MP3

  Any suggestions please?

  Thank you later!

  Hello

  What satellite you exactly and what port you used to record audio from external device?
  Have you used the microphone port?

  I doubt that your laptop supports the audio-in port so I don't think you can connect the external device in this case.

  PS: If the laptop freezes completely why you n t try to update the audio driver.
  If this will not help then you should check if a new installation of the OS would help you.
  Could the laptop freezes for two reasons; hardware or software problem.

  First, there are the software isn t interesting question and the new installation of the operating system allows you to check that would help!