Connection to the network printer

Similar Questions

• Network Vista and XP - connection to the network printer problem

  I try to print to a network printer connected to a vista from a computer xp machine

  Two computers on a network
  Vista machine is connected through the ethernet card and has a connected printer
  XP machine is via wireless network

  Both machines have the same network name "mshome".
  Open ports on the firewall and also left Software Firewall

  When I print a job, I see it be wound on the info from the printer on both machines, but then, it is automatically deleted.

  I am able to access the hard disks from two computers

  The printer works this way, when you share a printer between XP and Vista where the printer is connected to Vista, XP will communicate with the printer and its drivers Vista.

  So as I suspected it was due from pilots, in your case XP will be offered 64 bit readers which it does not recognize

  If we rely on the printer connected to the Vista 64-bit operating system operating system 32-bit, we need to install the additional drivers (especially the XP must be with 32 bits, only 32 bits of the operating system will not show if it's 32-bit or 64-bit)

  So in this case, you must right click on the printer on Vista and go to the sharing tab, and then click additional drivers, it will be the operating system and Version to select and you will need to select Windows XP x 86 and install the drivers

  Now your Vista will be the 32-bit and 64-bit drivers installed. Now, when you share the printer, when the Contacts XP Vista, Vista has drivers and it will be able to share the printer correctly. Anish

• Unable to connect to the network printer. Impossible operation completed (error 0 x 00000100).

  This is the error "Windows cannot connect to the printer. Impossible operation completed (error 0 x 00000100).

  He was connected last night before I installed a new office and had to unplugging the computer at home. The two systems are Windows Vista and the printer is HP Photosmart 5540 uses the 5500 drivers. I used this for the past year, and I can see it in windows Explorer. It just does not connect!

  Hello

  Try to set up the printer with a static IP address and adjust the setting on each computer for you new static IP of the printer.

  If you are not familiar with this look of process for it in the printer manual.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• 7640 envy: Envy 7640 connected to the network, printer is not found by PC

  I have a DSL modem, router ASUS RT-AC88U, HP computer desktop running Windows 10. I used the Setup on the printer and wireless Assistant received the following message "no found problems.» Congratulaltions on the installation of your wireless printer. "Could not connect the PC and the printer. What I am doing wrong?

  It worked!  This is the best scan ever. I could never have done it without your help.

  I'll be able to connect by ethernet or wireless?

• Unable to connect to a network printer

  I am unable to connect to my network printer, even if when I run the command 'Connect to the printer' and select 'network', while the program is able to see my network printer, it crashes when I select the printer.

  I was able to connect to the printer in the past, but for some reason any printing interrupted.  I deleted and reinstalled the printer (HP OfficeJet Pro 8600) with the CD that came with the printer and once again, while trying to connect it froze.

  Any suggestions would be greatly appreciated.

  Hi André,.

  Welcome to Microsoft Community where you can find all the answers related to Windows.

  According to the description provided, looks like you can not connect to the network printer.

  I have a couple of steps, which I think should help you with this problem.

  Method 1:

  Try the steps mentioned in this link and check:

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Method 2:

  Visit this link to learn more about "Troubleshoot network printer."

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  In addition, visit these links and check:

  What are printer permissions?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-printer-permissions

  Troubleshoot file and printer sharing

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-file-and-printer-sharing

  Hope this information helps. In case you have issues with Windows, post here to Microsoft Community.

• OfficeJet 4630: Says printer connected to the network, but computer says that it is not connected or idle

  I can't print to our hp officejet printer range 4630.  The printer says that it is connected to our home wireless network.  However, he said that it is inactive or not connected to the network on my mac.  The only way it will print sometimes is if I switch to a wireless network that is named the same as the printer.  AirPrint does not work.  We have a Linksys router.  Not sure if this is the problem or not.  I ran all kinds of diagnostic impressions on the printer and all say that it is connected.  I also tried to put the ip address into my web browser and it does not find the printer when it is connected to our home network.  Help, please!

  Thanks for trying my earlier recommendations. In my view, the problem you are experiencing may be with your wireless router. Normally, I would have you make sure that it is configured correctly, but you cannot access the built-in Web server.

  I want to try to set a static IP address, so we can try to get in the EWS. Please continue here: printer does not maintain the wireless connection

  A little luck? If you were able to set a static IP address, please try and access the built-in Web server. Follow the steps below:

  1. open EWS (use my earlier recommendations) printers

  2. go to the Network tab

  3. network protocols

  4. Select enable IPv4 ONLY

  Now with IPv4 enabled, you should be able to print wireless.

  If this isn't the case, you will need your router company to make sure that the multicast is enabled, Hello Protocol is enabled, mac filtering is disabled and ask them to check if there are updates the firmware for the router and the router's firewall check to make sure that it does not obstruct the communication

  The following ports are also used by your HP device and may need to be opened on your firewall configuration

  Incoming (UDP) ports are ports of destination on the computer while outgoing ports (TCP) are ports of destination on the HP device

  Incoming ports (UDP)

  137, 138, 161, 427

  Outbound ports (TCP)

  137, 139, 427, 9100, 9220, 9500

  The ports are used for the following functions:

  Print

  427, 137 161 UDP ports

  TCP port 9100

  Download of photo card

  137 138 427 UDP ports

  TCP 139

  Scanning

  427 UDP port

  TCP 9220, 9500

  Faxing

  427 UDP port

  TCP port 9220

  Installation of device HP

  427 UDP port

  Web Services

  80, 443, 5222 and 5223

  Any change? I appreciate your persistence!

• "Windows cannot connect to the printer. Make sure you typed the name correctly and that you are connected to the network. »

  I have a Windows Vista laptop. I usually have no problem printing over the network to my University Library. Then I bought a new Kodak printer to my apartment which I also configured to print wireless. For about a day, I could print from these two networks, depends on the location. Now, I can't print at the library. I am able to see all printers but when I try to 'Connect', it says "Windows cannot connect to the printer. Make sure you typed the name correctly and that you are connected to the network. "Word, printers of the University Library no longer appear in the list you choose to print. What should I do?

  Hello Lauren,

  Please take a look at this Microsoft article on "networked printer troubleshooting:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems
  I suggest to disable all security software, including firewalls, you have probably enabled or installed and then try to print again to see if that makes a difference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

• Printer connected to the network, but it is not

  Hello world. Could someone help me please. I bought a HP4620 to use with my IPad. He ok installed and connected to the network ok. The problem is that sometimes it prints and sometimes not. Print the Configuration page it says that it is connected, even if the iPad don't see. He gives in detail all the same in every situation.
  When the iPad can't see the printer if the wireless hub is restarted everything goes back to as it should. 1 hour later and it went again.
  Can someone help me please?

  I think that this is a business hub 3 if it changes anything?

• «operation cannot complete error 0 x 00000709.» Double check the name of the printer and make and make sure that the printer is connected to the network. »

  Original title: Error 0 x 00000709...

  Error 0 x 00000709... I get this message because I bought a new laptop printer a canon IP100.   My computer won't let me not choose as a default printer at all and it comes up with this message:

  «operation cannot complete error 0 x 00000709.»  Double check the name of the printer and make and make sure that the printer is connected to the network. »

  I had trouble terrible., the only way I was able to use it is to remove the other printer but then again used I would have like a detauls.

  Can someone tell me how to fix this error, I would apreciate any help I could get with that.  I have two printers in the same time, one for the front desk and the other mobile.  I'm sure that someone out there knows what to do?  Thank you

  Hello

  Please follow the suggestions posted on April 16, 2013 by me from the link below.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/printing-error-0x00000709-when-i-try-to-make-my/a8235379-07ad-487e-b9e8-e041f3a715ee

  Please back up the registry before making changes.

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Hope that the information provided is useful. Do not respond if you need more help.

• HP Envy 4500: Printer connected to the network; laptop computer connected to the network; laptop cannot find the printer!

  I searched through the forums and read a few threads about similar questions, but do not yet have a solution to my problem.  The printer is connected to the network (even printed page "Congratulations, you're connected" with all the relevant information).  It is on the same network as my laptop.  However, when I run the exe to install on my laptop, it does not find the printer, even when I put the IP address the printer gave me on the congratulations page!  I have run Avast Free Antivirus 2015 on my machine, but don't see any particularly troubling parameters which could interfere.

  Any thoughts on how I can get the laptop to see the printer?

  Henchman21,

  Thank you for the information you have provided to us. I will be you initial steps that could solve the problem.

  Solution

  1. do you have the HP Envy 4500 connected to your computer via the usb cable

  2. If you have installed the correct software for your HP Envy 4500 and the drivers on your computer, you will need to run

  * Note: If the software and drivers for the HP Envy 4500 does not work or does not work the .exe, you must uninstall it in add it and remove programs.

  2 1a, you should download the drivers and software for the HP Envy 4500 on-site HP click on this link.

  2 2 b If you have correctly downloaded it you must connect the HP Envy 4500 device to the computer via a usb cable and launch the installation. Usb printers will be automatically detected by your computer. Installation of HP Assistant there will be a point he will ask you if you want to configure the computer for wireless connectivity, it's time that all wireless information stored on your computer will be transferred to the HP Envy 4500. If this does not work! and I know that it will not...

  3. you should check if you have administrative rights on the computer.

  I hope that the solution I provided will work for you.

  Let me know if the steps above don't work for you

  Thank you

• Error found: iP1600 printer can be connected to the network

  Title: Problem of networking; model of the host is running XP and can not print from computer laptop/WIN 7

  Hi, my host comp. is running WIN XP and laptop WIN 7. I've already updated the printer driver Canon witch is connected to the host model. On the hardware of the laptop I can see the printer is on a network, but... cannot print the test page / troubleshooting of the error found: iP1600 printer can be connected to the network.

  I also downloaded on laptop CanonPrinter add-on driver, this driver necessary?

  Hello

  I suggest you install the drivers for PIXMA iP1600 on both Windows XP computer and check if the problem persists.
  PIXMA iP1600
  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_ip_series/pixma_ip1600#DriversAndSoftware
  Hope this information helps.

• Error 800703eb when you try to connect the network printer

  HII guys, can someone help me on this problem?

  I am trying to install the network printer. But I face the error code 800703EB and another description is cause to line 4 and 1 from vbs code tank.

  The following vbs code to connect the computer to the network printer:

  1. '
  2. ' Printers.vbs - Windows Logon Script.
  3. Set objNetwork = CreateObject
  4. objNetwork.AddWindowsPrinterConnection \\printserver\xerox2

  I am very grateful to the response of anyone on this issue, thank you very much.

  Hello

  (1) have you made changes before the start of this issue?

  (2) what is the brand and model of the printer?

  Perform a clean boot and try to connect to the printer:

  Step 1: Clean boot

  How to set up Windows 7 to start in a "clean boot" State

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Step 2: Try to download and install the latest printer drivers.

  Please visit the websites below:

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Install a printer on a home network

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer-on-a-home-network

• Printer cannot connect to the network

  Hello

  I have a photosmart HP 5510 printer - connected to 2 laptops.  Everything worked fine until I finally made a secure network and has not worked since.  I tried add the mac address of the router and all kinds of things and have no idea what to do next. Any suggestions?   I can go as far as to put in my ssid and password in the printer connect but still says 'unable to connect to the network.

  OK, more ideas.  Remove encryption between the router and connect the printer.  From the front of the printer to allow Web Services and see if there is an update for the printer.  Leave it to update.

  When it's done, re - activate the encryption on the router and try again.  It may be a bug in the firmware in the printer (although I doubt - he would have caught in tests).  I still think that his router, but...

• Printer all-in-one HP Envy100 will not connect to the network

  HP Envy 100 D410a connects to the network even with MAC disabled on Dlink router according to the indications 'wireless network test report?  What should I do now?

  OK, everything looks good.  The firmware is updated on the router?  You've restarted the router (pull power plug temporarily)?

• OfficeJet Pro 6830 hangs when it is connected to the network

  I just pick up a Pro OfficeJet 6830. I installed the ink cartridges and it seems to be able to print copies and test pages, but I can't seem to connect to my network. Here is what I tried:

  Using the Wireless Setup Wizard

  I selected my network in the list and entered my WPA key. It says it tries to connect, then the following occurs:

  1 briefly press (for less than one second), a screen will appear showing that it has successfully connected to the network.

  2. Press briefly (for less than a second) the screen flashes blue with an icon of 'power' and 'B8B2A4F8' text (which I assume is an error code).

  3. the screen display changes to "printer error: there is a problem with the printer.» "Turn the printer off, then on.

  4. after restarting the printer, he complains that he has not been arrested properly.

  Any other attempt to connect gives the same results.

  Ethernet connection

  If I turn on the printer when connected via Ethernet cable to my network, after about 10 seconds it crashes as described above (steps 2 and 3) without doing me anything at all.

  I also tried a "Hard Reset" (i.e. unplug the printer for 60 seconds, and then it turning it back on again). This made no difference whatsoever.

  I managed to get it to connect to a WiFi hotspot on my laptop (and I checked the firmware updates, but unfortunately there is none available), it seems that there is something of my network that do not have the printer. I have no idea what this could be, however. Someone at - it ideas?

  It solved!

  I spent a bit of time on the phone with HP tech support and the guy could not actually solve the problem for me but it helped prove that the hardware network printer works OK. I could connect the printer directly to my PC via Ethernet, then ping and access the built-in web server.

  It occurred to me that perhaps the problem was related to DHCP, because the printer broke immediately after the connection to the network. My router is an Asus RT-N66u with custom firmware (version Asuswrt-Merlin 376.48_3) and I could see the router newspaper that he was sending a DHCP acknowledgement to the printer just before he died.

  So, here is what I did to solve the problem:

  1 turn off the DHCP server on the router.

  2. on the printer, operated the network icon on the homescreen (at the Middle bottom) wireless.

  3 typed down "gear" icon to the left (settings).

  4 typed "wireless settings".

  5 typed "Assistant wireless configuration".

  6 selected my wireless network and entered the WPA key. This time, no crash, but he did not get an IP address assigned (obviously).

  7. back in 'Wireless Settings', I typed in 'advanced settings '.

  8 typed 'IP Settings'.

  9. tapped "manual (static).

  10. enter in the details for my network - yours will probably be different, but I entered in what follows:

  IP address: 192.168.002.201 (I chose this because it is outside the range of addresses, the router for DHCP problems).

  Subnet mask: 255.255.255.0

  Default gateway: 192.168.002.001

  DNS address: 192.168.002.001

  11 hit 'apply '.

  12 re-enabled the DHCP server on my router.

  And now it works!