Connection to the server vCenter Server Ports

Similar Questions

• Connecting to the Server - Port 80

  I was hoping to install the server to connect to (Server security mode) display on our web server box, placed in our DMZ.

  I'm trying to avoid having to add a second server in the DMZ. A message came during the installation that port 80 is already in use (by the web server).

  The only suggestion was to free the port 80. I am watching a second box to run the login server?

  Hello

  even if it is possible to install the server security and your Web server on a single box, I wouldn't do that. You have two completely different services, even when they are run on the same port number. Opinion on the use of your Web server, which may affect the service office for your users?

  Kind regards

  Christoph

  Don't forget to assign points if this answer was helpful for you.

  Blog:

  http://Communities.VMware.com/blogs/Dommermuth | http://www.thatsmyview.NET/

• Unable to connect to the server vCenter because the user name or password not valid

  Hello

  I have a VMware View version 5.1.0 installation (704644) and when I try to add additional virtual machines to an existing pool I get the message (cannot connect to the server vCenter because the username or password are invalid).

  I have checked all the instructions below and still failed to add virtual machines

  If you are unable to connect to vCenter Server:

  1. Confirm that a network port exists and is available. For more information, see increase the number of ports assigned to a virtual switch for VMware View (1026014).
     
     
  2. Confirm services VMware View manager are running. For more information, see check which required VMware View Manager services are running (1026136).
     
     
  3. Confirm that the network is correctly configured for use in a VMware View environment. For more information, see in the VMware View virtual desktop network configuration (1026498).
     
     
  4. Confirm that name resolution is functioning properly in your environment. For more information, see audit for VMware View DNS settings (1026017).
     
     
  5. Check that the permissions/credentials are correct for the user of the vCenter server. For more information, see confirm/credentials permissions are correct for user vCenter/vCenter server (1028705).
     
     
  6. Confirm that outcomes of the interaction of third parties do not exist with the operating system. For more information, see the confirmation that there are no questions of third-party interaction with the OS in a VMware View environment (1027466).
     
     The virtual machine, I have already assigned to this pool, I can access. I can access by using the client view and also from the console.
     

  Has anyone else seen elsewhere?

  See you soon

  You have the same problem with other pools?   Have you returned through configuration under the Configuration/servers view vCenter configuration?

• Error installing Adobe Creative cloud due to cannot connect to the server. No firewall, no restrictions access app without anti virus blocking & Port is clear.

  Hi, I encountered error to download cloud creative adobe. For your information, I do firewall, port and access app like the app if you need level. But I am still experiencing installation error (Trying to connect to the server).

  I also downloaded the latest version of the cloud creative and reinstalled (I erased all the previous installed version of creative cloud who happened to have the same mistake to where I can't connect into consideration due to unable to connect error adobe server)

  Please advise because I bought a package of creative software to begin work as soon as possible.

  

  

  Are you looking for a fast feedback today because I can't do my job and everything has been delayed.

  Note of course: I used the creative cloud before this and he happened to have an error (unable to connect to the server from adobe), so I can not connect to the creative cloud. In this case, I uninstalled and reinstalled (using the latest version downloaded or old installers).

  There are so many invisible problem that this can... I realized by myself trying anyway possible associated with actual client errors (instead of strategy/connectivity issues pc & network).

  The solution that you have shared is incorrect, as I mentioned in my post above, I released my linking strategy and etc and the problem well obviously a customer source of creative cloud adobe itself.

  Furthermore, I solved the problem.

• VSphere Web Client cannot connect to the server vCenter Single Sign On.

  I'm running the virtual appliance of the trial 5.5.0.20400 build 2442330 on ESXi 5.5.0, 2068190

  While I try to log on to the Web Client, I get this error.  VSphere Web Client cannot connect to the server vCenter Single Sign On.

  I put fallow the steps to disable SSO by changing the webclient.properties line add file and ad sso.enabled = false .    Then on the vCenter Server Appliance, restart the vSphere client service by typing service vsphere-client restart .

  I enclose the reference files.

  All ideas will be useful

  
  

  This answer was simple, all I had to do was remove the # in front of the statement in the file.   and SSO has been disabled after the restart of the service.

• Error connecting to the server by using the Client VMware vCenter

  When you attempt to connect to vCenter server using vSphere client, I get this message:

  "a general error has occurred: authorize the exception."

  However, if I log on the vCenter server locally and use a local Windows account in vSphere Client to connect to vCenter Server on the same computer - it works OK.

  There is obviously a problem with what happens when you use active directory to authenticate a user who connects with the VMware vCenter server client.

  Someone has seen this before or have any ideas?

  Thank you

  I had a similar problem on two different sites

  1. It was my firewall local windows on my Windows 7 desktop that it has prevented from work
  2. Another situation was DNS was not working properly and once I had a static entry, it worked

• Muse forms error (error: mail(): unable to connect to the server e-mail "localhost" port 25, verify your "SMTP")

  HIE

  I get this error when downloading my site on Azure

  Can I use forms in azure or I have to embeed HTML so that

  ﷯2 warnings

  Web server returned an unexpected error in PHP. Contact your Web host or administrator of the Web site on the configuration of PHP and mail. Error: mail(): unable to connect to the server e-mail "localhost" port 25, verify your "SMTP" and "smtp_port" in php.ini or use ini_set()

  PHP mail can be disabled or misconfigured web server. These forms can not send email. Contact your Web host or administrator of the Web site on the correct configuration of PHP mail.

  Rockinghudson you cannot use FTP to upload your site on Business Catalyst. You must use post it on the function of catalyst for business within the Muse. The code generated for Business Catalyst is different from the code that is generated when you use file > Upload FTP host or file > export as HTML... from capacity and generic hosting needs are different from those for Business Catalyst.

• Individual office, no vCenter: hidden my connection to the server

  Hello

  I am currently on my first installation of view and already have problems... I downloaded the trial version and installed the connection to the server, then I installed 3.1 Agent on a virtual machine for Windows XP Pro SP2 in the same host, it seems to work so far but when I try to add this machine as an individual in my login server office, it just doesn't appear: I choose individual office, another Source, an entry ID , and when it's time to choose a machine, nothing is displayed. I tried to enter the IP address, but no change.

  Config is ConnectionServer and view Agent 3.1, first on the Server 2003, second on XP Professional. They are in the same AD domain, they can communicate (I'm even able to access the administration panel of the connection to the server of my agent machine).

  Any idea what I missed?

  Thank you!

  Your setting is misspelled, should be "VDM_VC_MANAGED_Agent = 0".

  (You have VMD instead of VDM).

  Thank you

  Jon

• Need help to connect to the server of composer, in view, administrator

  I'm setting up a Horizon view 6 eval. The text environment will be low, and I want to use linked clones. The configuration is the following:

  5.5 vSphere hosts

  vCenter 6 (device) - not joined to the domain AD due to a bug VCSA 5.5 & 6.0 with the way my AD domain name is named; specifically, the domain name is ad. domain.net, but the name of Pre-windows 2000 is the domain

  View connection on Windows 2012 R2 VM

  View dial on Windows 2012 R2 VM

  Database SQL on separate server

  I followed the instructions in the eval guide and this blog to put in place: Horizon view 6.0 | Of Sean IT Blog

  All with the prerequisites and setup went well. I am now at the stage where I bind the connection to the server with vCenter and composer. The connection of vCenter worked correctly (using a local account that I created in vCenter for display for use with the permissions in a role). In the settings of the composer page, I keep getting an error "Unable to connect to View Composer." I am specifying the user account is the composer service account that I created in AD called vcmpSvc, which has permissions in AD create/delete computer objects and is also in the local Administrators group on the server of composer. I'm using the correct password, checked by connecting locally on the server of composer with the service account and by launching a command with the admin elevation prompt. I tried the following formats for the user name:

  vcmpSvc

  domain\vcmpSvc

  [email protected]

  In addition, the SOAP port was 18443 (unchanged from the default value) and the firewall is disabled on the server of the connection and the composer. What Miss me?

  Too bad! I solved it. It turns out that the composer on Windows Server installation has failed. Everything seemed fine, but when I looked in the list of services in order to check that it was starting well, I saw that he was missing completely. I installed new composer and everything works perfectly now.

  I hope this helps someone!

• HP Officejet 6500 a more impossible to connect to the server

  My HP Officejet 6500 a more printer was connected to my wireless network and was attached to the ePrint service; and I had an email address to send prints to my printer. But today, when I go to the ePrint, it shows that my printer is NOT connected to the SERVER!

  He invites me to go to the Setup menu option / Services Web Setup / email address Panel on the printer display. And, when I do that, it shows me: "you can connect the printer to the itenrnet through a proxy server and touch the ENTER PROXY button! I do not know what Proxy Server, he is asked? And when I get soemthing, it then asks a PORT number! Still, I don't know what is the Port! My printer is still connected to my home wireless network.

  Then I went back to HP ePrintCenter page and REMOVED my printer and then tried to ADD a printer, but, now, he asks me to "enter the printing Code.

  When I tried to enter the print code I had on the file, it says that the code was not valid; the codes are ONLY good for 24 hours, and I have to get a new printing code to return to the configuration of the printer menu steps described above!

  Looks like I'm stuck in a vicious circle.

  I would appreciate your help. Thank you.

  To correct the unable to connect to a web server error. I'd start by power cycling the router and the printer. If still we get the error that I will then try to put a static DNS server built-in web printer (EWS).

  To power cycle the router:

  1. unplug the router (most do not have a power button) and then put
  the printer off using the power button
  2. wait 30 seconds
  3 plug in the router, wait until it is completely upward and the operation.
  4 turn on printer
  5. after the printer is completely top and operational reattempt to connect to web services

  If after that, you still get the error message, I had put the static DNS. To do this:
  1 get the IP address of the printer, and then make a browser (IE, Chrome, any browser you want) and enter
  IP address of the printer in the address bar. This will bring up the SEWS
  2. search for the network titled tab and click on it
  3. then click on IPv4 in the left column, wired / wireless depend on the connection, if connected by Ethernet
  Choose wired, wireless select wireless
  4. when loading this page watch the second part entitled 'Configuration of the DNS addresses' change this radio
  Manual button and change the DNS preferred manual to 8.8.8.8 and manual to auxiliary DNS
  8.8.4.4 and then click on apply.
  5. pay particular attention the following screen which appears this message usually is a way to undo changes only
  made by clicking on the OK"" button. Avoid this by clicking another tab
  or just leave it until you close it.
  6 turn the printer of the cycle and then turn it back on
  7. once the printer is back on and retry operation, activate web
  services and reprint information page so that you can get a new code and add your printer back to ePrint Center. You will need to create a new e-mail address for the printer.

• Unable to send emails, SMPT can not connect to the server

  I use the latest version of the EL CAPTAIN 10.11.04, just updated software, and I can not send my emails is to show only SMTP error can not connect to the server.

  I can receive emails, but cannot send emails. I deleted the account and reinstalled it once again changed the SMTP Port 25, 465, 993 trying all of them.

  Please advice, or guide me what I am doing wrong, or what I can do to fix this error.

  Please take each of the following steps that you have already tried, tests after each of them. Back up all data before making any changes.

  Step 1

  In the Mail menu bar, select

  ▹ Connection Doctor window

  In the window that opens, double-click on behalf of SMTP (outgoing mail) problem. it. another window opens, displaying the list of all outgoing mail accounts. Choose the one that you clicked.

  Select the Advanced tab in the settings for the account and check the box marked

  Automatically detect and maintain the account settings

  If it is not already done.

  If there is more than one account of the problem, repeat. Close the window and save the changes.

  Step 2

  Open again the list of SMTP servers. Note the problem server settings, then click the sign button less to delete and confirm. Click on the sign more and recreate the account with the same settings.

  If you use Gmail, remove the account completely in the preferences panel accounts Internet and re-create it. The option "detect and maintain" must be selected in advanced settings for the incoming mail account.

  Messages will be again synchronized with the server automatically. Which can last for hours if the mailboxes are very large.

  Step 3

  Quit Mail runs. Launch the Keychain Access app and enter the name of the server of mail out in the search box. For example, if you use Gmail, enter

  SMTP.gmail.com

  Make a note of the password, and then delete the keychain items. The next time Mail connects to the server, it will prompt for the password. Enter and save the password in the keychain.

  Step 4

  If you use Gmail, sign in to your account on the site, and in the account settings, click the "Sign-in and security." There should be an option somewhere on the page to "allow applications that are less safe." Enable this option and save the change. Note: I don't use Gmail and I have not tested this solution myself. If it does not, either make you on Google user forums for help, stop trying to use Gmail with the e-mail, or just stop using Gmail altogether (strongly recommended).

  The mail server can use a form low, obsolete encryption for secure communications with customers. Recent versions of Mac OS X has changed the behavior of Mail and other applications so that they no longer tolerate low security.

  Log on to the e-mail account on the website and see if there is a security setting, you can change. I can't be more specific. Refer to the documentation of the service provider.

  If there is no adjustment, convince the upgrade of server securityserver administrator. He or she must do it anyway. Low security affects all customers, not only Mac users.

  Otherwise, you have all the right options to continue to use Mail with the service. You can disable SSL in the Advanced account settings, but that is very dangerous and may not work at all.

  You might be able to get a more flexible mail client, such as "Thunderbird", to accept the low security, or perhaps you can access the account via webmail.

  Ideally, you should switch to a provider of postal services better. You would not have this problem with a well-run service. The risk of weak SSL are known for a long time, and to competent server administrators have already taken the simple steps are sufficient to avoid these risks.

• AOP5 get no connection to the server of ODS

  Hello

  We use tiara and the AOP5 Plugin to connect to different servers of the ODS. We have a tool of the "HighQSoft" called ASAM-Commander toolprovider. With this tool, we get connetion on all our servers of ODS.

  But when connecting via AOP5 the more local network server works sometimes, the connection to the server in another subnet does not work. Tiara displays the following Message:

  

  I checked the CORBA Ports with NETSTAT and logged after that try.

  The Logi shows more information:

  162 gewunschte 'TestODS' konnte nicht open werden Datenbestand der.
  (187): error initializing interface
  163 19.03.2014 07:13:29 Fehler:Fehler bei dem Öffnen der Datenquelle "TestODS" vom Typ 'AOP5 '.

  Is it possible that there is something that is blocking the connection in tiara?

  
  

• How to get the IP address of the client when TCP connect on the server

  How to get the IP address of the client when TCP connect on the server.

  The only parameter obtained the login is the login ID.

  I assume you are using "Wait of TCP on the listening port" on the server. This returns the remote address and port (like out in option).

• Test the connection to the database failed: connection to the server could not

  I have one of my servers HPOV NNMi 9.23 restarted this morning and NNMi is loading is no longer.  I see the following errors in the newspapers said:

  /var/opt/OV/log/NNM/public/nmsdbmgr.log

  06/04/2015-09:28:05 connection to the database test failed: connection to the server could not: connection refused
  The server running on host "127.0.0.1" and accept
  TCP/IP connections on port 5432?

  /var/opt/OV/log/NNM/public/postgres.log

  2015-04-06 09:25:55.312 EDT: 8580:0LOG: could not translate the hostname "localhost", "5432" service at the address: name or service not known not

  2015-04-06 09:25:55.312 EDT: 8580:0WARNING: could not create listen to "localhost".

  2015-04-06 09:25:55.312 EDT: 8580:0FATAL: could not create TCP/IP sockets

  I have checked/etc/hosts and found the following entry:

  #; Local
  #;
  127.0.0.1 localhost

  The command line, I can ping localhost without problem.  Not sure why NNMi begins not at this point.

  Turns out be the permissions on the file/etc/hosts.

• I am able to receive emails, when you send emails I get the following message: the connection to the server has failed.

  When sending emails, I get follow-up messages:

  The connection to the server has failed.

  Object "try again"
  Server: 'smtp.comcast.net '.
  Windows Live Mail error ID: 0x800CCC0E
  Protocol: SMTP
  Port: 25
  Secure (SSL): Yes
  Socket error: 10013

  Comcast e-mail settings (note the reference to port 25)

  http://forums.Comcast.com/T5/E-mail-and-Xfinity-connect-help/E-mail-client-settings-customer-generated/TD-p/778889

• Windows XP Outlook Express 6... the connection to the server has failed.

  I have Windows XP. When you attempt to send emails from my Outlook Express 6, I get this message...

  The connection to the server has failed.

  Account: 'pop3.live.com '.

  Server: 'smtp.live.com '.

  Protocol: SMTP

  Port: 25, secure (SSL): Yes

  Socket error: 10013

  Error number: 0x800CCCOE

  Probably your ISP blocks port 25 for access to the SMTP servers other than their own. Go to tools > accounts > {account} > properties > advanced. Change the port to 587 and try again.