receive error message-
Whenever I try to install OverDrive media console program after downloading on the internet, I get the message "system administrator defined policies to block this facility." the problem is. I am the system administrator & if I put all policies, I didn't! How can I remove the policies?
Hello
Try the steps listed here to reset the permissions on the system.
Solve installation errors using the SubInACL tool to repair the file and registry permissions
http://blogs.msdn.com/b/astebner/archive/2006/09/04/739820.aspx
Tags: Windows
Similar Questions
-
Received phone call telling of Microsoft and they were receiving error messages. I have his phone number of caller ID.
Hello
It's a scam.
Microsoft does not contact you unless YOU have made prior arrangements with them to do.
There is an article in the link I'm you provide at the end of this one
Read this Information from Microsoft:
"Avoid scams to phone for tech support.
http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx
Don't be fooled of unsolicited calls. Don't provide personal information.
Here are some of the organizations that cyber criminals claim to come:
Helpdesk Windows
Windows repair center
Microsoft technical support
Microsoft technical support
Windows Support Group Technical Department
Microsoft Research and Development Team (team of Microsoft R & D)
Either these so-called "Microsoft" Tech companies want to sell you a worthless software, or remote access to your computer to try to steal your credit card and bank information and also achieve an identity theft on you.
See you soon.
-
Can't burn music CD - R. Worked fine until today. C00D10BA received error message. Windows media player cannot find the file. He said to repair or remove a link. What is an easy way to find and fix this? I know little about the links and need a simple way to fix... Thank you!
Hello
You got the C00D10BA error message when you use Windows Media Player. The following information
might help you solve the problem.
http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5260&ID=C00D10BA&ContextId=89&OriginalID=C00D10BADon't forget to click on the four " + " to see more help.
Support for Windows Media Player
http://support.Microsoft.com/ph/7763I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Here's the situation.
First of all only started to the top of my Asus to find was no sound. Following up to plug-and-play service has not started. It is now removed apparently.
Here are the solutions I tried, in and out of safe mode:
While the plug-and-play was still there at all, and I tried to go I still receive error message 2. could not locate the file.
In CMD sfc/scannow reached 32%, then breaks down, saying: it finds corrupted files, but could not fix.
It Startin via msconfig did not work.
Tried to go through Device Manager, which is completely empty for some reason any.
System Restore is restoring before this problem. When you attempt a restore, plug-and-play service is not returned to the existence, defective or otherwise.
I knew, but there may be malware, mutiple scans with several services did not find anything.
I tried to contact microsoft help and they might suggest only I have upgraded to windows 10. Tried several times, and he has failed to be upgraded, every time. For the most part just download windows 10 and then by restarting the computer as if nothing happened. Any ideas on how I can fix this?
Hello
Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing.
I would like to ask you:
- You are running Windows 7 or Windows 10 on your PC?
- When was the last time it was working fine? Remember to make changes to the computer before this problem?
Given that you are unable to complete the scan of SFC and Task Manager is empty, usually reinstall or do a repair install is the best choice of action. However, we can try to fix these files and check if that helps. To do this, refer to the steps below:
- Open the start menu and type "cmd".
- Right-click on the command prompt and click "run as administrator".
- Type the following commands and press ENTER after each.
DISM.exe / Online/Cleanup-image /Scanhealth
DISM.exe / Online/Cleanup-image /Restorehealth
After you run these commands, restart the system and check.
You can also view,
Difficulty errors of corruption of Windows by using the DISM tool / System Update Readiness
https://support.Microsoft.com/en-us/KB/947821
If you are using Windows 7 and have the product key for this. You try to run an upgrade in Place to fix all the corruptions.
Refer,
Hope this information was useful.
-
Someone called me suddenly claiming to be with Windows. He said that Winows had received error messages from my computer on the unnecessary files downloaded on my computer, and offering to help me remove... If I give him remote control. It's for real? Someone else make that call?
Many people have had these criminals call them. I guess that you have hung up on them.
Microsoft never call someone out of the blue and would not have the necessary information to do so, even if they wanted to.
-
Hi, receive error message: Error 1935 when trying to install adobe photoshop elements 11. An error occurred during the installation of Assembly component {9F81AF1-0E47-DC99-A01F-C8B3B9A1E18E}. HRRESULT:0 X 80070057. Can anyone help? I use windows Vista and the DVD is to this system. May this be the cause?
-
Tried to scan the document. Received error message - INVALID parameter
Tried to scan the document. Received error message - INVALID parameter
Hi tomh61878980,
Refer to this KB document for help error: bad parameter. Acrobat
Kind regards
Nicos
-
I still receive an error message when you try to download the update to update security for Microsoft PowerPoint (KB957784).
I searched night and day for a solution - even contacted microsoft by e-mail. The specific error is: Code 57F
It is displayed when I press the "get help with this error message:
"WindowsUpdate_0000057E" "WindowsUpdate_dt000"It was the E-mail feedback:
Thank you for your email about problems with the download of update of security for Microsoft PowerPoint.
I understand your concern. Due to the nature of the technical issue, it was not possible for me to respond to your request. There are number of ways you can get technical information to our support team.
MowGreen-
Understood the factor of masking - has considered it. Still, I send my appreciation in this matter. I would like to know if you think I should download the SP2 for Vista.Peace-
MattService Pack 2 offered by Windows (automatic) update yet?
Cause
This problem can occur for different reasons. However, the following reasons are the most common:- Already, you have the service pack installed and do not realize it.
- You must install another update before you install the service pack.
- You have not installed Service Pack 1 (SP1) and so you are not offered the option to install the Service Pack 2 (SP2). SP2 requires that you have installed SP1.
- Components of the system that you must have to install the service pack are not installed on your computer.
- You have a piece of hardware or software on your computer that is listed in the section "hardware and software which if present will result in Windows Update and automatic updates offers is not a service pack " article.
- You have installed a preliminary version of a service pack, and it was not properly uninstalled before that you tried to install the final version of the service pack
Service Pack 2 for Windows Vista and Windows Server 2008 is not available to users for which the following update is hidden:
955430 description of the Windows Vista and Windows Server 2008 installation feature software update released April 28, 2009See article KB, Matt. When the system is ready for SP2 [as in you will be informed of the automatic update], suggest then you download the full SP2 package, save, temporarily disable AVG and then install SP2.
The MS KB article below has sound advice for steps, you have to take before installing a Service PackWhat you need to know before you install Service Pack 1
Microsoft offers support without charge to get SP2 installed or for the resolution of problems that arise after he installation
Start here - free support for Windows Vista service pack problems
If a problem occurs, you can also solve problems installing yourself-
How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issuesMowGreen MVP Data Center Management - update of safety Consumer Services
-
403-Forbidden: access denied
While trying to upgrade to XP SP2, SP3, a server error message appeared as the title with the text "you not may to this directory or page using the credentials you provided for the fight."
????
Hi ZRay,
- You use Windows update or manual download to install service pack 3 on the computer?
- During the process of upgrading to how you receive the error message?
- You have security software installed on the computer?
I suggest you check out the article below and try the steps mentioned, check if it helps.
When you try to install Windows XP Service Pack, you receive the error message "Access denied" or "installing the Service Pack has not completed"
http://support.Microsoft.com/kb/949377
Steps to take before you install Windows XP Service Pack 3
-
I CAN NOT LOG - ON
I AM THE ADMIN, BUT I CAN NOT CONNECT ON THE ERROR MESSAGE IS - THE USER PROFILE SERVICE HAS NO OPENING SESSION IMPOSSIBLE TO LOAD THE USER PROFILE... HOW CAN I FIX?
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
Receive error message: "Dell support center has stopped working".
original title: dellsupport center has stopped working. I do not have anything to do with again, todo with DELL SUP [PORT CENTRE.if it does not stop I take legal action]
If she does not stop im, legal action, it's harassment. I don't want anything to do with DELL SUPPORT CENTER
Hello
1. when exactly you receive the error message?
2. What is the brand of computer?
3 did you changes to the computer before the show?
Method 1: Follow the steps in the following link and check if that helps.
http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=427832
Method 2: If the problem persists then, ffollow these steps and check if you receive the same error message.
Step 1: Try to boot in safe mode and check if the problem persists. Check out the following link to start the computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Step 2: If the issue is not still in safe mode, and then start the clean boot computer to determine if a third-party program is causing the problem. To configure your computer to clean boot see the following link.
http://support.Microsoft.com/kb/929135
Note: when you are finished troubleshooting, follow step 7 article to start on normal startup.
-
Receive error messages when you try to use Outlook Express.
Why can't use outlook express for emailing, I have lot of HAV with google or hotmailSometimes I need to use outlook express, but when I use it says that it cannot send problems
Hi Graham,
1. what exactly happens when you try to send mails? You receive messages or error codes?
2. what anti-virus software is installed on the system?
Method 1:
You can read the following article and check if it helps.
Method 2:
You can also temporarily disable the security software and firewall installed on the system and check if the problem persists.
Note: Be sure to enable the security software on the computer after checking.
Hope this information is useful.
-
Receive error message "unable to install SF_CDA_Software.msi."
I received the message box stating the windows installer cannot install SF_CDA_Software.msi constantly. I continuously hit Cancel to continue whatever I'm working on. I tried to clean the registry, I performed malware. It won't let me do a system restore.
Can anyone help, please!
Hi Shelz16,
Thanks for posting your question on the Forums of Windows Vista.
SF_CDA_Software is a component of the Realtek High Definition Audio driver. If you receive this error permanently, there is a possibility that the Realtek High Definition Audio software installed in the start of the machine may be corrupted and causing the problem.
If you have the Realtek High Definition Audio device installed on the machine, you can try to reinstall the Realtek High Definition Audio software.
If device Realtek High Definition Audio is not installed on the computer or if you do not reinstall the software, you can configure the machine in a clean boot state and disable the start-up input.
How to troubleshoot a problem by performing a clean boot in Windows Vista.
http://support.Microsoft.com/kb/929135Hope the above information helps. Please post back and we do know.
Thank you & best regards
Ashish Gupta
Microsoft Answers Support Engineer
-
Impossible to format CD
Windows Vista Ultimate SP2 installed
When you try to format CD - RW, error message "windows could not finish this format.
Because the installed SP2 (which supposedly contains the fix for the problem) can not install the patch - receive 40 Code error when system tries to decompress the files.
Help?
http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD
Burn a CD or DVD
http://Windows.Microsoft.com/en-us/Windows-Vista/which-CD-or-DVD-format-should-I-use
Should which CD or DVD format I use?
See if help above.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Otherwise:
It comes with Vista, upgrade install and activate Forum.
http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads
They will help you with your question in Vista Hardware and drivers Forum above.
See you soon.
Mick Murphy - Microsoft partner
-
Original title: what it means when you download a file, but an error pops up saying you do not have administrative permissions, but actually you download from an administrative account?
I am trying to download the latest version of adobe flash player from their site. When I try to download it, it will tell me I have not sufficient permissions to do so and I am downloading to an administrative account, and it still does not work.
Hi Antonlew,
1. are you able to install/download other programs without any problem?
2. did you of recent changes on the system?
3. you receive the error message when download or install Flash player?
If you run the installation files, you can try using administrator privileges and check if that helps:
Right click on the program installation files and then click run as administrator.
See the article:
How to apply once with a full administrator access token?
You can also check out the link to Adobe support and check if it helps:
Installation problems | Flash Player | Windows
Important: The above link contains steps to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
For more information, you can view the article:
-
Creative cloud received error message
Update Windows 7 Windows 10, since can't access my creative cloud account. Message received the error "failed to reach the Adobe servers. Check your firewall settings, and then try again in a few minutes. »
Please see the links below.
- Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite
- Impossible to reach on the Adobe servers
- Re: Receives the error message indicating not able to access the Internet in the Assistant download Adobe
Hope this will help you.
Kind regards
Hervé Khare
Maybe you are looking for
-
Problem to download applications with the new iPad Pro
I am not able to download apps on my new iPad Pro. The word "waiting...". "poster permanently under the application icon. When I try to download apps to iCloud (i.e. apps I have on other devices) I just get a circle of rotation. I have checked and
-
SD5010 DVD Player USB Toshiba problem
Hello I recently bought this DVD player, when I play a movie through my USB always, it stops before the end of the film and cuts back to the main menu. Does anyone know why this might be happening? I tried resetting the DVD player and that didn't wor
-
Recently bought movies video app only appear not
Whenever I buy a new film, it takes several days for it appears in my video library on my iPad Pro. Immediately appears on my iPhone. All I have this problem and know how to fix?
-
Activating/Deactivating the ATR records the value does not
I do changes in the host file of Streaming Full-Duplex and Tx-Streaming to implement a system of TDD using a single antenna. I intend to toggle the values of registry ATR by changing 0/RX Enable RF and RF 0/TX Enable between True and False, as shown
-
When you wake up you can't print anything until it reinstalls the drivers. Sometimes, it is not automatic, that it will install the printer and drivers so I have to turn off the printer and turn it back on so it can recognize it. It does not uninst