Problems of latitude E6530 USB 3.0 Windows 8

Similar Questions

• Windows Update runs continuously after the installation/purchase program for Dell Latitude E6530 with Windows 7 Pro 64-bit

  Hello

  I bought a Dell Latitude E6530 'renovated', that was the end of the lease. (It was not defective). I started up and installed Dell help. I have had no trouble to do a few minor update of drivers. However, when I try to update Windows it just runs and.

  I checked the Windows Update with the troubleshooting Diagnostic Utility. I made sure that there is no infection or rootkits on your computer. I followed several suggestions I found the title of Microsoft Support positions and renamed the folder of Distribution system, as well as a few things of the reset. I have register/authenticate online with Microsoft Windows software.

  When I run the troubleshooter, it says registration for the Service is missing or damaged, and he said it suits him, but he can't solve "problems installation of recent updates. However, when I run it again, it is said that he correct once again.

  Any suggestions?

  Melissa

  Check this thread - it helped a lot of us:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-7-update-solution/f39a65fa-9d10-42E7-9bc0-7f5096b36d0c

  Kimmo

• problem with USB driver in windows 8

  I use winsows 8 in hp probook 4440 s with processor i3.  Recently I have a problem with my usb ports 3. they do not react like usb 3 and most of the time does not at all. I looked for a host controller driver expandable usb 3 for windows 8, but can't find anywhere because it is built with windows 8. Where can I find the driver or what can I do now?

  Hello

  Check with HP Support, their drivers and documentation online and ask in their forums
  on known problems. The drivers are from HP. update the BIOS, chipset and the major
  device drivers embedded and separate that may affect the USB.

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ====================================================

  Update driver and troubleshooting details (don't forget to check for BIOS, chipset,

  (and other drivers):

  Microsoft - hardware and drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  What happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  Check with the manufacturer of system (manufacturer of motherboard for customized systems) updated
  the BIOS, chipset of low level driversand the major device on-board and separate
  drivers. Execute DriverView - value VIEW drivers Microsoft hide - updated from those
  without drain to their name.

  -Free - DriverView utility displays the list of all device drivers currently loaded on your
  System. For each driver in the list, additional useful information is displayed: load address
  of the driver, description, version, product name, company that created the driver, and
  more.
  http://www.NirSoft.NET/utils/DriverView.html

  To check system drivers manufacturer as replacements and camera manufacturer who are most
  current. Control Panel - device - Display Adapter Manager - note the brand and
  fill out the template tab of the driver for your card video - double-click - write down the
  the version information. Now click on UPdate Driver (this can do nothing as MS is far behind
  certification of drivers) - then do a right click - Uninstall - REBOOT it will refresh the driver
  stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if
  3rd party with their own software and drivers and the other main device drivers you
  a.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration), and then
  Site of the manufacturer of the device (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions.
  (Review of the BIOS, Chipset and software updates on the site of the manufacturer of the system while there).

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT
  After each installation.

  Always check in the Device Manager - drivers tab to be sure the version you install
  actually arises. This is because some restore drivers before the most recent is installed
  (particularly that audio drivers) so install a driver - reboot - check is to be sure
  installed and repeat if necessary.

  Repeat BTW to the manufacturers - manufacturers of devices DO WORK DO NOT THEIR SCANNER-
  manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• No Apple USB driver in Windows 10 Device Manager

  Is there a way to retrieve the Apple USB driver in Windows 10 Device Manager.  I downloaded the iTunes 12.3.3 yesterday and now he is gone.

  I tried

  • plug into each of my Apple devices (iPod, iPad, iPhone, iPhone 4S 6)
  • restarting my computer
  • disabled my virus protection software
  • synchronization with different strings (some Apple, others not)
  • my devices restart and try again
  • Uninstalling iTunes and reinstalling
  • Uninstalling iTunes and goes back to and older version
  • make a Windows system to a restore point when I could synchronize my devices

  My main problem is that I need to sync my devices and iTunes does not detect them without the driver.  Windows can detect my devices and they appear in the file Explorer.  I am also able to get pictures and videos I've taken off the power unit and on my computer with no problems.

  Anything else I can try?  I'm out of ideas.  Thank you!

  This can help:

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

  Refer to the section:

  If you are using a Windows PC

  and read carefully.  Depending on your version of Windows the Apple Mobile device driver may appear in different places.

  Other than that, the General adzice is to demolish EVERYTING associated with iTunes and reinstall.  See excellent iTunes for Windows troubleshooting page located at turingtest2:

  Troubleshooting problems with iTunes for Windows updates

  especially the section:

  Remove and then reinstall iTunes and other software components

• problem with authui.dll after installing a windows 8 skin pack

  Hello

  I'll just run you through my problem, I installed a windows 8 skin pack which I initially thought was a product of windows (but it wasn't) after installation it forced me to restart my computer, it worked well but it didn't look right and my windows program of customization wouldn't work, so I used the uninstall program to uninstall files , but it was recommended not to remove the uninstall program so I didn't, after uninstalling it prompted me to restart my computer again once I did, when he got the login screen, a window popped up saying my authui.dll has been deleted or missing, and caused the logonui.exe to plant or does not work properly , so I turned off my computer in the only way that seemed possible that was to hold down the power button for 5 seconds, then I have it turned on and tried to get the menu of the OS and when it did my off usb keyboard so I couldn't choose Restore my pc, is there any other way to restore my pc? I have another laptop and a USB 4 GB if that could help. Also is it possible to re - install or recover windows uses a USB?
  OS: Windows Vista Ultimate 32 bit

  Hello

  Often, we see errors at startup as the result of a program of loading during the startup process.

  To solve these, we use the clean boot troubleshooting.

  The following article describes this process:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Please note that after refine us the cause, it is important that we return to a normal startup and manually delete the startup program.

  Best regards

  Matthew_Ha

• Disconnect external USB key using Windows 7 Ultimate 32 bit

  Whatever the USB that I connect to my desktop PC Windows 7 continualy disconnects readers. I tested many drives, but when tested on my laptop using Windows 7 Ultimate 64 bit all these exact same drives work perfectly.

  My office is using and Intel Core 2 Quad Q6600 2.4 GHz with 3 GB of memory.

  I've read this complaint anywhere on the Internet and I tried several fixes with no positive results. All the drivers are up to date. I uninstalled and reinstalled until I'm blue in the face.

  What I read during my research, it seems that this is a common problem that 64-bit users are complaining a lot, but that's obviously a problem with the 32-bit version of Windows 7 as well. Many tech Internet sites also claim that it is ONLY a problem on the desktop and not on laptops, which I guess I confirmed in my tests.

  Everyone does experience, and if anyone has found a fix?

  Thank you.

  Hi flhtcuu,

  See the following articles with some good information and troubleshooting:

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-USB-device

  and:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Problems with hotsynching my Tungsten E2 with Windows 7

  My husband just bought me a labtop and I also have a Palm Tungsten E2.  Here's my problem: my palm don't HotSync and I have years of information on it.  So after weeks of coming to accept the fact that my palm does not work with my new laptop which has Windows 7 (I love my phone and I love my Palm) I decided to attempt more HotSync and obviously it didin't work.  So now that I reluctantly accepted that my palm and the new laptop are not good for them, I am ready to go with another plan of action.  So, does anyone know if there is another computer on Pocket (probably not a Palm product) which is compartive hand held Palm that will work with windows 7? As well as in a way that I can get all my info transferred from the Palm on the new product (whatever it is)?  I would really appreciate any help that anyone can give.    I'm looping at the moment, because I rely on my Palm.  I don't like that people say, it cannot be an up-to-date product, but he did wonders for me to help me keep my schedule together.  I'd really rather NOT go back to the paper version of Franklin Covey, which is where I started.  For those who know the Franklin Covey, is wonderful, but it's on paper.  I don't want to go back to the paper.  Too much stuff to carry and the Palm is so much easier >!

  * original title - not a happy camper! Problems with hotsynching my Tungsten E2 with Windows 7 *.

  I presume that you have run the troubleshooting tips to: http://kb.palm.com/wps/portal/kb/na/tungsten/e2/unlocked/solutions/article/2630_en.html

  And the software downloaded and installed the latest:

  http://KB.Palm.com/wps/portal/KB/na/Tungsten/E2/unlocked/solutions/article/37014_en.html

  State of Palm, 64-bit versions of Windows 7 and Vista will synchronize not via USB so they suggest BlueTooth.  Since you have a new laptop, done with BlueTooth?  (If not, we can always blame your husband for getting the bad!).  It is a solution, you can buy a BlueTooth dongle for not a lot of $s:

  http://www.Newegg.com/product/ProductList.aspx?submit=Ene&DEPA=0&order=BESTMATCH&description=Bluetooth+dongle

  Most of them simply plug into a USB port, so there is no duty open Notepad.

• I need to make a usb bootable for windows 8.

  Bootsect.exe

  I can't download the bootsect.exe from the store.  Only get the file iso32 integer or an image file or download... Manager what is the problem?  I need to make a usb bootable for windows 8.  I am running windows 7 32 bit.  What's wrong with the instructions for download

  Go to the Microsoft Store website, sign in with your bank account, select Download Options and select Windows 7 64 bit and proceed to download.

  1. connect to your Microsoft Store account to view your purchase history

  2. search for your purchase of Windows 7.

  3. next to Windows 7, there is a drop-down list "additional download options.

  4. in the drop-down menu, select "32-bit ISO."

  5. right click on the link and then save the bootsect.exe file to the location where you installed the Windows 7 USB/DVD Download Tool (for example C:\Users\username\AppData\Local\Apps\Windows 7 USB DVD Download Tool).

  6. once the file has been saved, return to the Windows 7 USB/DVD Download tool to create your bootable USB device.

  or

  (1) download and install the Windows 7 USB/DVD Download Tool program, as described on the Microsoft Store website.

  (2) download a 32-bit version of bootsect.exe work. Here is a link to the 32 bit bootsect.exe:
  http://www.SevenForums.com/attachments/installation-setup/47060d1263222191-32-bit-Bootsect-bootsect7600x86.zip
  From: http://www.sevenforums.com/installation-setup/54443-32-bit-bootsect.html

  (3) once downloaded, copy the BootSect.exe file in the same folder that contains the file Windows7-USB-DVD-Download - Tool.exe installed. This file in Windows Vista's default installation directory is C:\Users\USERNAME\AppData\Local\Apps\Windows 7 USB DVD Download Tool\ (you need to look in XP)

  (4) application of the Windows 7 USB/DVD download tool as indicated on the web site of Microsoft Store. The end result will give you a boot USB flash drive that contains everything you need to install the 64 bit version of Windows 7.

• How to implement alert e-mail on the insertion of Usb media on windows 7?

  Original title: what is the event id when a mass usb storage detect on windows7?

  Hi Iam M.L.L slimani,

  I want to implement alert e-mail on instering Usb support on windows 7 and later.

  This can happen through the event viewer by selecting "attach a task to this log.

  The challenge is what is event Id for detecting Usb.?

  Hi M.L.L slimani.

  Thanks for posting your query in the Microsoft Community Forums.
  It is better suited for the IT Pro TechNet public. Please ask your question in the Forum on TechNet Support. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en/category/w7itpro

  I hope it helps. If you have problems in the future, please let us know. We will be happy to help you.

• Problem detection IOGEAR GUH285 USB 2.0 hub

  I just bought this 2.0 hub 4 port USB of IOGEAR (model GUH285). This is supposed to be a plug-and-play hub. Infact, if I connect it to my other computer with windows 7, it works fine. But on this one (Windows 7 too), it's not!

  In PC-1, where he works, it does not install any software device driver. It works and is listed under USB controllers in Device Manager.
  In PC-2, where it does not, it's trying to install a software device driver and it fails. If I look in the Device Manager, it lists under other devices-> hub USB 2.0 with a yellow sign at the front. If I try to update the driver and then manually select the location one or C:\\Windows\Drivers, it can't find it (my assumption was that it takes a generic player already installed on PC - 2 is on PC - 1). I contacted the manufacturer, but they say it should work like him for the other PC running the same operating system windows 7. Can someone help me please.

  by the way, I got it works... had to install manually the usb hub root for her... but now there is another problem... my usb for mouse Logitech M305 wireless receiver would not work with her. Other things attached to the hub as a Western digital external drive, USB in Kingston, dell etc USB keyboard key work perfectly well. Only problem is with the USB receiver. If I connect the M305 usb receiver to the hub, it will try to install a device driver and invariably fails and it lists, as previously, under "other device-> usb receiver" in Device Manager. But if I connect the M305 usb receiver to the other free usb port on my laptop directly, it works very well and it lists as composite USB device. I can see that the driver is 'C:\Windows\system32\drivers\usbccgp.sys' when it is listed as a device composite usb plugged into the USB port on my laptop. It is just plug and play in this case. Is there a way I can manually install this driver specific to the M305 usb receiver when it is connected to the USB 2.0 hub? Hope that I have understood the question.

• Pouvez the Superdrive Apple USB used with windows computer

  Can I use the Superdrive Apple USB with the windows computer

  Only on a USB Bus, which can provide more standard power 500 milliamps.

  Apple computers that support this drive directly have a USB function that allows it to attract more of the standard.

  Drive sharing

  If your Mac is not a built-in optical drive, and you must use a CD or DVD, you can connect an external drive as the SuperDrive Apple USB.

  You can also share disks of the optical drive of another Mac or a Windows computer that has the DVD or CD sharing Setup installed. Sharing of CD or DVD allows you to access documents stored on these disks and allows you to install some software.

• Re: Satellite A210 - USB 2.0 - Windows 7

  Hello world

  Since I have windows 7 installed, I recognized that my usb speed was very slow. After a check with everest, that I have seen that there is just a USB1 installed but I have USB 2.0. I searched all over the internet, but I can't find any USB driver for windows 7 or XP fpr the A21.
  Anyone know where I can find the driver?

  Thanks for the help,
  bePo

  Hello

  USB drivers are part of the Windows operating system. This means that Win 7 alrady contains the correct drivers.

  On the European driver Toshiba page, I could find different patches towing registry 1.0 and 1.2
  You should install it!
  Don't forget that you have installed the driver for chipset so!

• Satellite M40-307: problem of Audio with USB (pc--> hifi) link

  I have a Toshiba M40 - 307 for a month and a micro stereo system (Philips mc-M570).

  I can link them with USB direct connection to hear the sound from the speakers of Philip pc.

  Only problem: I have several intermittent workers during each session sounds acoustic (movie, game, mp3...)
  I tested it with two other PCs (NEC e DELL) and I didn't have any problem.

  Do you know where the problem may be? USB?
  Thanks for all your replies!

  Hello

  I put t know if this link will help you, because this link contains information on a W2k, but it seems like it might be a Microsoft driver problem.
  http://support.Microsoft.com/default.aspx?scid=KB;%5BLN%5d;817865

  I would recommend to google a bit.

• Problem of drift incredibly strange clock in Windows 8 on ENVY 14 t-1000

  I have a ridiculously strange and frustrating issue running Windows 8 x 64 (RTM) on my Envy 14 t-1000.
  
  The first time I noticed this problem was when I ran the consumer Windows 8 build preview earlier in the year. I noticed that my clock might drift off-sync, usually at least a few hours, often more than a day (always drifted backward in time). I would sync it using 'Internet time' in the options of time & Date but it would soon become off once again in a few minutes.
  
  Thinking it was a dead CMOS battery, I disconnected the battery and checked, but it read full voltage. I then did a clean install of Windows 7, no problems whatsoever. That lasted a few months.
  
  I recently did a clean install of the final version of Windows 8. Exactly the same thing is happening now.
  
  All this experience? Is there a particular driver should I install? An incompatibility permanent with Windows 8 on this machine?

  Hi chambo622,
  
  Take a look at this document and let me know if the steps help solve your problem.

• I get the message "app Incredimail has stopped working, a problem caused the program will stop working - Windows will close and inform you with a solution.

  When I try to open Incredimail I get the message "Incredimail application has stopped working, a problem caused the program will stop working - Windows will close and inform you with a solution ', I have used as my e-mail for several years and never had a problem before Incredimail client.  I have gmail for my email.  You are able to help with this problem?  Thank you, June Fleischmann - my email address is * address email is removed from the privacy *

  I suggest to see if there are updates or new versions available for IncrediMail.

  If still no luck, I suggest to ask the support of IncrediMail

  I hope this helps.

  See you soon,.

  J