Connection via Blutooth

Similar Questions

• If connected via Bluetooth with car. Phone starts to compose himself after updating iOS 10

  After updating iOS 10: connection via Bluetooth for car, then phone (iphone more 6s) began to compose himself. My President iPhone which is not longer work well

  Hi Pharao-nael,

  I understand that after update your iPhone to iOS 10, he begins to call itself when it is connected to Bluetooth. I know it's important for your iPhone to work as expected, so I'm happy to help for this.

  Since this occurs only when it is connected to Bluetooth, the first thing you want to do is cancel the twinning of the car:
  Configure and use third-party Bluetooth - Apple Support Accessories
  

  Turn off pairing a Bluetooth accessory

  To disable the pairing a Bluetooth accessory, tap Settings > Bluetooth, find the device you want to disable the twinning, tap , and then we forget this device.

  When you forget this device on your iPhone, iPad or iPod touch, this accessory is removed from the list of available Bluetooth devices.

  Make sure that your iPhone does not seek to call itself after it is disconnected, and then you can pair the iPhone and the car again:
  

  Pair your device with a Bluetooth accessory

  1. On your iOS device, tap on settings > Bluetooth. Stay on the screen until you complete the steps to pair your accessory.
  2. Place your accessory in discovery mode and wait until it appears on your iOS device. If you don't see it, or don't know how to make it discoverable, check the instructions that came with your accessory or contact the manufacturer.
  3. Tap your accessory pair. You will have to perhaps enter the CONFIDENTIAL code or password. If you do not know what your PIN code or word password, see the documentation for your accessory.

  When pairing is completed, you can use the Bluetooth accessory with your device. You can pair several Bluetooth accessories with your iOS device. Just follow the steps above to pair additional accessories.

  Thank you for using communities of Apple Support, cheers!

• Is it possible to use the Remote app with the Apple TV connected via ethernet and iPhone via WiFi?

  Is it possible to use the Remote app with the Apple TV connected via ethernet and iPhone via WiFi? When I try this Apple TV does not appear in the list of devices on my iPhone.

  Yes, I'm doing exactly this with the same put in place.

  If the problem persists the next relative to the following articles might help you.

  Troubleshooting home sharing

• Simultaneous connect via Dock and via Bluetooth?

  Forgive the newbie question, but I use my Iphone6 to connect to my stereo system through a dock and also want to connect via Bluetooth to a speaker in a room? This can be done? Thank you!

  # You can only select an output for the audio stream. You cannot output audio to the dock and bluetooth connector at the same time.

• How to disable automatic updates of ios connected via wifi

  How to disable automatic updates of ios connected via wifi

  1. Open the settings app.
  2. Push App and iTunes Store.
  3. In the automatic downloads section, you will see an element called updates.
  4. Press the switch to turn it off

• Updated at El Capitan and my mac doesn't see my camera Canon (connected via USB). Need help. Cannot import images.

  Updated at El Capitan and my mac doesn't see my camera Canon (connected via USB). Need help. Cannot import images.

  Try using using the Image Capture (in the Applications folder)?

• drive external hard connected via usb hub powered Time Capsule guard fall...

  Hello.

  Try using a player external 3.5 "connected via USB hub powered to my Time Capsule to serve as a backup Time Machine secondary.

  When I connect the external hard drive, it turns out, and everything seems good (Yes it is correctly formatted). I see the external hard drive in my time machine preferences panel and also the desktop browser window, etc..

  After selecting the drive hard as the second backup TM, I start TM. After a few minutes the backup fruitbodies. Audit of airport utility, the drive no longer appears in the profile of Time Capsule. I can't turn back the drive without unplugging / plugging the USB cord. I went to HD (WD green 4to) and HGST 4to - deleted both.

  What is the speaker (the box is powered)? Can you have a USB hub between the external hard drive and time capsuls? Something else?

  Just seems like something somewhere that expire, causing it to drop the connection...

  Thanks for your useful suggestions to fix this!

  Is your TC the Gen5, model AC?

  I must say that your experience is not uncommon. I tested it myself recently and was disappointed in how the poor reliability has been... Although not as bad as yours... in fact cutting in a few minutes to start a backup is ridiculous.

  What is the speaker (the box is powered)?

  Quality of the envelope varies a lot... What is it??

  If this is the typical brand X... Plug it into your Mac. is it reliable?

  Go to your control panel and dig up the actual USB chip used... I don't know if we can help on type a lot. But it helps us determine the fleas are a problem.

  I found the hard drive in the finder to mount helped... not the sparsebundle that must be mounted by Time Machine... but the disk must be mounted in the finder so that you can copy files back to him.

  I start TM. After a few minutes the backup fruitbodies.

  Check in the finder, it has created the sparsebundle and works.

  Can you have a USB hub between the external hard drive and time capsuls?

  It's our usual recommendation... but he won't always help... especially if the USB hub is another brand X...

  Note that all societies are changing USB tokens at the drop of a hat... some seller of a rival company arrives and offers them 1 c off the coast of 1 million chips it is common to spend even in the middle of a race. Even the tenors have no satisfactory fixed hardware...

  The computer has loads of memory... and may contain drivers for hundreds of different USB tokens... but the TC is a very limited amount of space and with questions if the driver is not fair.

  I started a thread for a database just now... has not progressed much.

  https://discussions.Apple.com/thread/5912861?TSTART=0

• Portege M700 - 3 G-connection via Novatel & T-Mobile

  Hello
  My M700 is around the age of 12 months and now I tried to connect via a 3G connection to the internet. The build-in 3G connection manager Novatel (called MobiLink) offers 3 pre-installed configurations, none of them work for my T-Mobile SIM card.

  I can't find any clues (Toshiba or Novatel or T-Mobile) how to set up a working connection. I try to create a new profile, but have no idea on demand "APN:" or other necessary parameters.

  Is there anyone with experience on these issues with a useful suggestion?
  I know that my T-Mobile card user-number and the ANKLE associated with the SIM card.

  Thanks in advance,
  Peter

  Hi Riedel,

  If I were you I talk with T-Mobile and ask what APN you should use. A digital CAMERA is basically a string that you enter to dictate the software to connect to (e.g. TMobile), T-Mobile will be able to tell you what APN you must try to connect to usually.

  Good luck

  Paul2008.

• Satellite C660-1RQ cannot connect via HDMI to the NEC projector

  Hello.

  I have laptop Toshiba C660-1RQ.
  It can not connect via HDMI to the NEC projector.
  I tried many drivers - the 268,57 (taken from the Toshiba site) to the new 331.58

  I thought, that it my problem, but the same lapto (my friend work - we have a few these notebooks in company) works well...

  And my HDMI works with monitors, TV (but sometimes!), etc.

  I don't know what to do...

  > And my HDMI works with monitors, TV (but sometimes!), etc.

  If s computer laptop HDMI port works correctly in relationship with other devices, I think that the problem is related to your laptop.

  What happens exactly when the projector is connected? Can you pass to the external video using the FN + F5 key combination?

  The use of Fn + F5 keys can toggle between internal and external display.

• Satellite M30-106 - does not connect via radio

  Hello
  hope someone can help im having headache with my Satellite M30-106 problems

  I can connect to the internet via ethernet, but once I delete it does not connect via radio. I am trying to connect to a router broadband Sagem sky but for some reason any he just not going, when I open wireless connections, I can see the projection of router as safe but just cannot connect.

  I would also like to point out I am very new on wireless and to be honest, I don't know what im doing please give me advice in simplistic terms you can so I can be sure I understand where im going wrong

  Regards wayne

  Hello

  If you try to connect to your router, you will ask for a password or what exactly is going on?

  Maybe you should try to update your laptop WLAN driver. You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online downloads support & -online Download Driver

  Also make sure you use the same WiFi standard that you have configured on the router, for example 802.11 g.

  What operating system do you use? Have you installed all service packs and patches?

• Re: Satellite L300D - unable to connect via WiFi network

  Any help please? -I just L300D with Vista professional.
  Crossed troubleshooting but still unable to connect via the wireless network - no probs with other laptops.

  When going through "Toshiba assist" message arrives "this wireless network device is disabled.

  Please activate the device"- button wireless is activated with light yellow?

  any ideas?

  Are you sure that the laptop wireless switch is on?
  Look in the Device Manager. Maybe it's the wireless network card disabled. So activate it.

  Also try an update of the WLAN driver. You can find it on the Toshiba site:
  http://forums.computers.Toshiba-Europe.com

• New Mac Pro does not connect via WiFi to my ATT router.

  I have a brand new Mac Pro garbage but I'm unable to get it to connect to my ATT wireless router. My phone, the laptop and the TV do it but not my main computer. Oddly enough, I AM able to connect via WiFi for the Mac Pro to my laptop. Any suggestions?

  Please post your question in the Mac Pro support forum... Mac Pro

  If you have a question about one of the Apple routers... the AirPort Express, AirPort Extreme or Time Capsule airport... the products pictured below that we support in this forum... we can probably help you.

  

• I have 5bdevices connected via iCloud and all are sync very well, except the iPhone 6 more. When I enter anything on any calendar except the iPhone, all devices to synchronize the event. It receives events but are not sent to them. Help!

  I have five Apple devices which are connected via iCloud. The only one who is not properly synchronized is the iPhone 6. It receives the calendar events, but will not send them.

  Please, try the following...

  1. First make sure that all of your settings are correct, that the calendar synchronization is checked on all devices (System Preferences > iCloud on a mac and settings > iCloud on iPhone, iPad, or iPod).
  2. Make sure the calendars that you use are in your "iCloud" and not a "on my Mac", "On My Phone" or other iCloud no account (you can do this by clicking / pressing the calendar button in the upper left corner of the application), iCloud no calendars will be not synchronize.
  3. If you are sure that everything is configured correctly and your calendars are in the iCloud account, you could try to uncheck syncing calendar in iCloud settings, reboot your device and then reactivating calendar sync settings.

• DSC-HX90V/B does not connect via Wi - Fi for my MacBook Pro under El Capitan!

  I just had a DSC-HX90V/B and got Wi - Fi to connect to my iPhone 6Plus. However, I can't seem to connect to my MacBook Pro using PlayMemories House. I use the network configuration tool, and even if my camera is connected via USB (and why do I have to do this, I could ask?), it is said that "any camera that supports the network connection is connected.

  I don't understand this.

  Hi pws442,

  When you use a Mac OS computer, you will need to download the software of automatically importing wireless to allow the camera send wireless files. You can download the program here.

  After downloading the software, please follow the steps below on how to configure the wireless connection.

  • Initial setup process:
  
  
  • 1. Make sure you that using a memory card is inserted in the device.
    
    
    2. Turn the camera
    
    
    3. On the camera, set the mode of USB connection from the camera to the MTP or PTP.
    
    
    4. Connect the camera to the USB port on the computer.
    
    
    5. On your computer, go to Finder and select Applications.
    
    
    6. Select automatically importing wireless.
    
    
    7. Set up your computer as a device to import files from your camera wireless.

       NOTE: If the device should be synchronized with another computer, the new computer must be defined as import wireless device.

    
    
    8. In the auto import wireless window, select set.
    
    
    9. In this computer will be set to the wireless device for your window of the camera import, click OK.
    
    
    10. Unplug the USB cable to the camera and the computer.
  
  
  • Transfer wireless after the initial setup process
  
  
  • 1. The device, select Menu.
    
    
    2. Select Setup.
    
    
    3. Select settings of the Access Point.
    
    
    4. Select the wireless access point.
    
    
    5. Press the play button on the camera
    
    
    6. Press the Menu key.
    
    
    7. Select send to the computer.
    
    
    8. Follow the instructions to save the images on the computer.

  If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch

• Problem with sending a message when you're connected via Wi - Fi

  Hello. Still getting used to my Dext (owned it for about 4 days). I noticed this morning that I can't send the mail from the POP3 account, I set up on my Dext when I am connected via Wi - Fi - when I try I get an "authentication failure". When I disable Wi - Fi email sends end. There is no problem with webmail - send although I am connected to the Wi - Fi or 3 G network.

  Anyone know how to send the mail while POP3 on the Wi - Fi network? Thanks in advance...

  Understand the problem - port incorrect settin for mail server outgoing. Changed to 587 according to some messages that I saw during a search - that did the trick!