Connection wireless printer keeps losing.

Similar Questions

• Problems with the wireless printer, keep losing the connection by modem

  I keep the bad connection Wireless between my laptop and my wireless printer, a friend and I have tried many things to start, but nothing helped.

  Hello

  1. What is the brand and model of the computer?

  2 did you receive an error message?

  3 did you changes to the computer?

  Method 1:

  I suggest you to see link and check.

  I suggest you to perform troubleshooting services and check if they list any error messages-
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2: Run the Fixit tool from the link of the article below.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 3: Perform the steps in the below article mentioned.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 4: Update the printer from the printer manufacturer's drivers.

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Reference: http://windows.microsoft.com/en-US/windows7/Install-a-printer

  See also:

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

• Printer not responding not connections (wireless printer) is good and solid. I replaced my old router wirelessly with a router of valuation. I had to plug it, but the printer does not respond now.

  Printer not responding not connections (wireless printer) is good and solid. I replaced my old router wirelessly with a router of valuation.  I had to plug it, but the printer does not respond now.

  Is what brand and model of printer?

  I do not work unless your new router has the same SSID and password wireless as the old. Consult your printer documentation to find out how to handle the situation. For example, some Lexmark wireless printers have a program called Configuration Utility Wireless in the Lexmark folder under all programs on the start menu that is used to set up the printer when changes are made to the wireless network.

• Network printer keeps losing its connection to laptop only

  I have a HP 2055dn printer that is connected directly to the port USB001 on a Dell Windows 7 SP1 desktop pc. This printer is on our network with limited access to a specific user. The printer is installed on the pc as the default printer and works great. However, the issue is with the Dell laptop Windows XP SP3 to users that is connected to the network and also has access to the same printer. The printer is set up on the laptop and, sometimes, it works very well and it is sometimes impossible to connect to print. It doesn't matter whether or not it is defined as the default value. The driver is updated. There isn't any manually installed on the printer IP address, nor I see that the IP address of the printer is connected to on the server directly from computers to change a port setting. We use Windows 2003 server and do not have an internal network administrator.

  After making the foregoing I check the devices and printers on the Win XP machine and the HP2055 is listed but still displays "unable to connect". When I check the port for this device settings, it says:

  Port: USB001

  Description: Virtual USB Port

  Printer: HP LaserJet 2050 PCL6 of series

  If the port on the laptop computer Windows XP appears as "USB001", this means that the laptop would expect to find the printer physically connected to one of its own USB ports.  This isn't where I understand that you have the attached printer.

  Unless I'm totally confused about your configuration (always a distinct possibility), you have the printer physically connected to the Windows 7 desktop.  You want to be able to access the printer from the laptop XP over the network.

  I guess that you can share files between the Windows 7 Desktop and laptop computer Windows XP.  If you can't share files because you have not properly configured the network permissions, you will not be able to share the printer either.

  On the Windows 7 Desktop, go to printers and devices, right-click on the icon for the HP 2050 and select "printer properties".  Click on the "Sharing" tab  Boxes for 'Making the printing on the client computers' and 'Share this printer' must BOTH be audited.  Make a note of the name in the "Share name" box (this should be a name relatively short no spaces and no special characters, something like HP2050 would be nice).

  On the desktop of Windows 7, click right my computer and select Properties.  Make a note of the name of the computer.

  Because the instance of the printer currently installed on the laptop Windows XP expects to find the printer on the USB port, you must install another instance of the printer on the laptop.

  • Go to printers and faxes, and start the wizard to add a new printer (click on add a printer)
  • Click the radio button to add "a local printer attached to this computer.
  • Uncheck the box for "automatically detect and install my Plug and Play printer."
  • Click next
  • Click on the radio button to "create a new port".
  • In the drop-down menu, select "Local Port"
  • Click next
  • In the "Enter a port name" box, type the following command and click OK
    \\COMPUTERNAME\Sharename
  
  where "COMPUTERNAME" is the name of the computer in Windows 7 that you noted above and "Sharename" is the name of the sharing the printer configured on the Windows 7 computer
• Run the wizard, add a new printer as usual.  If a message appears saying that a driver is already installed for this type of printer and you ask if you want to reuse the driver installed, answer Yes.
• When you get to the step of naming the printer, add something on behalf of so that you will know that this instance is one that is installed on the Windows 7 computer.  For example, if your computer name is DELLW7, you can name this printer 'HP2050 on DellW7.
• After you have confirmed that this system works reliably, you can delete the icon for the same printer in the screen of the laptop computer printers and fax machines (unless you sometimes actually want to connect the printer to the USB port of the laptop).

• Connected wireless, printer but not scan

  Well I just bought the 120 want wireless printer. It is connected wireless to my Mac. It allows to print but when I try to scan it does not find my computer. I entered the printer utility and selected scanning to computer, but keep the error message it is not communicating with the printer. (Of course, it's because I can print wireless). Is there a solution to this problem. My wife is running windows and it works perfectly for her through the wireless.

  I spoke to a representative from HP who went on the site of Apple and downloaded the latest version of the MAC compatible print driver. It took to connect with 4 different representatives of HP to solve the problem. I understand the difficulty, however, I think that technicians need to get on the same page. How one Tech may know exactly what to do, then the 3 others sent me in a different direction? The problem has been resolved so thanks to HP staff.

• Office Jet 4620: Connect wireless printer without USB cable

  I have a desktop HP 4620 jet.  He was hanging in my old router.  When I tried to join software router again asked me to use a USB cord.  I do not have a such cord for this printer and want to set using the wireless, but sofeward me continues to send at the option of the cable.  The router is ATT U-verse.  I need step by step instructions on how to connect the wireless printer.

  Thanks for any help.

  Hello

  HP Auto Wireless automatically sets the printer without connecting it to a USB port, only if your computer is also connected wireless to the network. If your PC does not have wireless connectivity USB cable would be necessary, except if your router supports WPS.

  If your PC is connected wireless to the router, restore the pritner as follows:

  1. Click on the WiFi the printer button and select restore network settings, confirm and invites.
  2. Click on the Setup (wrench) and select Tools, then restore the default settings and confirm any command prompt.
  3. Turn the printer off and turn it back on
  4. Open the HP Officejet 4620 software and follow the instructions to connect a wireless printer.

  Another option would be the WPS Pin Code or button WPS, if your router supports supported such a, tap the icon on the printer wireless and select WPS or Wireless protected Setup, follow the steps on the screen, press the button of your router or a PIN code, see the documentation for your router to check the capabilities of WPS.

  If none apply to your PC printer or yout, use a wireless computer connected or get a USB cable for the installation of hht, so a cable was supplied with the printer.

  Kind regards

  Shlomi

• LaserJet p1505 for connection wireless printing

  I have a Laserjet P1505 (not 1505n) a Net Gear N600 dual band Router router with USB port and printer. I tried to connect the printer USB cable to the USB port on the router and installed the printer on the laptop (a Windows Vista) I'm trying to save up for a wireless printing capability. The updated drivers from HP Web site, set to turn on printer 'sharing' but the printer does not appear in the network and sharing Center. Have directly connect the printer USB cable to the computer laptop USB port to print from the laptop.

  I missed something or cannot print via the router P1505 (without the "n")?

  Thank you

  I found a post where a similar problem has been resolved. The user has enough to show what he has done to help others like you. I hope this helps.

  OfficeJet 7210 won't install with Netgear N600 router

• Photosmart all-in-one c309g is connected, wireless, print runs, analyze a computer.

  Have you tried all the solutions available several times through doc of hp printer/scan, hp solutions, including resettlement using disk and downloading on site, uninstall, download patch amd, recovering to an earlier date and reboot... reinstalled to get a definitive answer again "HP Photosmart Premiun c309g-m software installation is complete." ", but your device is not connected.   So I'm back to the original problem... I have a good wireless connection, the printer works... will not scan to computer... MSG 'Try Start scan of the computer' if frustrating... is there a solution, I have not tried?   Pls advise. TX

  Windows 7, 64

  Hello-

  I think I know what the problem is. There is a problem with the processor. I will include a link that will solve the problem.

  http://support.HP.com/us-en/document/c03030583

  There is a patch in that you must run.

  After running the patch, you should be able to install the printer.

• officeject Widwe 7500 a format: unable to connect wireless printer

  Installed on the network, installed on the desktop computer. Are unable to meet so that I can print. Have you tried Scan doctor, reinstalled on the computer. Re install printer. Reset the router. Still no joy. My office ject pro 6800 no problem.

  Well, for this issue:

  1. If you have a USB cable connecting the printer to the PC, remove it.
  2. In your search type in printers bar and open devices and printers.
  3. Right-click on any icon of your printer listed.
  4. Click on remove the instrument.
  5. Repeat for all other icons of your printer listed.
  6. Click Add printer, and follow the prompts to add a queue for your PC.

  Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Unable to connect wireless printer

  Using OS 10.6.2 and Photosmart C8180 All-in-One

  Impossible to connect the computer to the printer. Printer shows with wireless assistant that it has the correct network (SSID). However, no connection is.

  Deleted the printer (as shown) on the page of the utility. Now, no printer is emerging.

  Right-click on the rectangle on the left (just before the + and - buttons) and select "reset Printing System".

• Wireless adapters keep losing the default gateway in Vista SP2

  I don't know what is happening, all my research led me to believe is has this problem

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/Vista-wireless-loses-Internet-access-after-sleep/f21fcdda-4372-469d-b983-f4bd50d7f81d

  and again, I think that's the main problem because I couldn't install the patch, said that it was not compatible with my version of windows, assuming that this is a patch for SP1 and SP2 unnecessary, even if it always seems to be...

  any help is appreciated...  Thank you

  Hello

  1 were there any hardware or software changes made on the computer before this problem?

  2. what fix, you can not install?

  See the article mentioned below

  Why you lose the Internet connection after the mode 'sleep'.
  http://support.Microsoft.com/kb/933872

  See the link below and check if you have run the same hotfix mentioned in the article.

  A Windows Vista-based DHCP client computer can lose its IP address, when the computer comes out of standby or hibernation

  http://support.Microsoft.com/kb/956119

  Answer comes back with more information so that we can better help you.

• How re - connect my printer wireless since the evolution to a router from another server?

  I went from attuverse at time warner, and now my printer is not working.

  Hi Dorothyt,

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. you receive an error message or error code when connecting wireless printer?

  2. What is the brand and model of the printer?

  You can follow these articles that talks about the installation of printer on the Windows 7 computer:

  Install a printer

  http://Windows.Microsoft.com/en-in/Windows7/install-a-printer

   

  Add a Bluetooth device or other wireless or network device: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

   

  Connect to Bluetooth and other wireless or network devices

  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• 5532 ENVY: ENVY 5532 has a connection wireless but not recognized

  My printer is showing a Wi-Fi connection (the light is solid and blue).  I ran a test report and all past with a very good signal quality.  When I try to print from my laptop or iphone, I get a message indicating that the printer is not connected (on my laptop) or no airprinters (on my iphone).  Before last night, everything printed fine.  You can provide any assistance is greatly appreciated.

  Hi @shaunaB44,

  Welcome to the HP Forums!

  I noticed that you can not connect wireless printer HP Envy 5532 for your Mac OS X 10.10 Yosemite. I'm happy to help you with this problem of connection!

  To confirm that your printer hardware is working, you are able to print a test page from the printer control panel? Video: print a test page.

  You see error messages on the display of the printer?

  In the meantime, try the steps in this guide, "printer offline" or "printer not responding" Message (OS X). And let me know what happens!

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope to hear from you soon and thank you for posting!

• router wireless Belkin an i keep losing my connection

  I have a belkin wireless router, i keep losing my connection, I have to go into my settings a TI is one connects showes here it's continues to lose connection an i don't have not spending my laptop in the room where my router is.can someone tell me what happens ever happens before

  today.

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message? If Yes, what is the full and exact error message?

  3. what operating system is installed on the computer?

  Method 1:

  I suggest you to refer to the article and see if it helps:

  Check the link and try to run the troubleshooter to check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Check the link and see if it helps:

  You may experience connectivity problems or performance issues when you connect a portable computer that is running Windows Vista or Windows 7 to a wireless access point

  http://support.Microsoft.com/kb/928152

   

  If the problem is not resolved, please provide more information to help you best.

• keep losing connection to e-print

  will not stay connection e-print

  Hello, there are 2 reasons to "lose the connection to e-print. 1 > e-print requires an active Internet connection: Please check with your ISP and see if there are problems at their end with your wireless network and internet. 2 > e-print servers undergo maintenance during which there could be a non availability of e-print services. Best regards, Jabzi, I work for HP. Please select the button "Accept as Solution" on the post that answers your question better. In addition, you can select the 'Congratulations' button on any post helpful to give this person a quick thank you.