Consignment in different modes

Hello

All learning AAA and I'm struggling with something. I have a RADIUS server set up and switches/routers authenticate to it. Everything works fine.

For safety, I have a local account set up as well, just in case the two RADIUS servers are down.

I was able to configure to log on users directly to the preferred, which is quite convinient. However, when I connect using the local account, I'm in the preferred as well.

Is it possible to configure a switch/router to connect to users who authenticated by the RADIUS directly Server mode, but if a user logs on by using a local account it will be in exec mode and you will need to enter a password to access the mode preferred?

Here is my configuration:

aaa new-model
aaa authentication login default group radius local
aaa authentication enable default group radius enable
aaa authorization exec default group radius local
enable secret 5 <...>
username testlocal privilege 15 password 7 <...>

ip radius source-interface Vlan150

radius-server host 192.168.10.2 auth-port 1812 acct-port 1813 key 7 <...>

radius-server host 192.168.17.2 auth-port 1812 acct-port 1813 key 7 <...>
radius-server retransmit 3

Change:

username testlocal privilege 15 password 7 <...>

to read:

username testlocal password 7 <...>

Tags: Cisco Security

Similar Questions

  • My computer does not start after losing power. He symbol WindowXP reacher, then resets. I tried from all different modes, but none works.

    Have tried all different modes for example. Ext. safe mode, restart the computer normally

    Have tried all different modes for example. Ext. safe mode, restart the computer normally

    Please use the recovery disk to repair the operating system...
    MD MOEEN AJAZ KHAN - MCP, N +, A +.

  • State machine with acquisition different modes/loops

    Hi all

    I did a machine design to State (as described here) to organize three (mutually exclusive) process / States: idle, measurement of calibration and continuous measurement. Calibration must be performed before measurement, because the result of the calibration is used for measurement. The data entry is a camera that should run continuously, also in rest mode.

    The problem however is that this state of calibration and continuous measurement (should) have another method of data acquisition. The measure is continuous and the images are processed in real time. To calibrate a number N of images should be accumulated and treated (simply create a background image).

    In the state machine as I have now (see attached image), I have the acquisition of vision outside the state machine in order to have a live view at any time. The problem now is that the inner loop in the State of calibration (the loop that must accumulate the framework) accumulates of course that the first framework N times, it is not question for all new managers during this State.

    Of course, I could fix this with an if/else statement in the first calibration mode accumulate images (if I< n,="" accumulate="" frame="" in="" buffer="" and="" continue),="" but="" i="" am="" not="" convinced="" that="" having="" a="" lot="" of nested="" loops="" is="" the most="" elegant="" way="" to="" do="">

    This also got me thinking, is the state machine, as I built it here all the best way to manage these two processes/acquisition modes? Or are there better ways to do this?

    Contributions and comments are very much appreciated!

    Note: I know that loop as scheduled now in State calibration is wrong with shift registers. It was a test before I realized that the fault was in the interweaving of the state machine altogether.

    Please do not attach pictures, but rather post executable code, screws (easier) or as extracts from LabVIEW (which became the screw when you drag in a block diagram).  If you have more than three attachments, compress the folder and attach the ZIP file.

    I was once describing a system similar to yours, and one of my students, who was a computer science major, said "it's not a State Machine."  I had a similar situation to yours, where I had a procurement process which took time and a 'Stateful' routine that does different things with data (in your case, use it for calibration, waiting to 'Go', absorbent, etc.).

    I understood that it was correct.  I ' D 'opposite' model, with the Acquisition, always running and "driving", the calendar and make 'Appropriate Action' on each set of data, where the Action could (and did) vary according to other conditions.  So I renamed my state machine 'Action engine', and everyone was happy.

    So I won't bother looking at your code (a quick glance showed me that I have only would be frustrated by the limited view), but will give you a suggestion for an alternative architecture.

    You want to (ideally) two parallel loops.  A single loop simply acquires the data (images) at some rate.  For each Image, it signals the loop else it's time to 'Action' on the acquired data (to do this, use a queue or the notifier).  You want that engine of the Action to perform independently the Acquisition loop, just in case a particular Action takes, say, 1.2 times sample to complete - you don't want 'Miss' samples!.

    The loop of the engine of the Action is a unique, appropriate Action at the time, on the newly acquired data.  If you are in the 'State' calibration, the Action will be "add to the calibration.  When you have accumulated enough data to do calibration, set the following Action to (for example) 'wait to start the Signal.  When you receive the Signal to begin, take Action to "acquire, process and save data.  And so on.

    As it happens, I did my code exactly in this way, but it was the idea General - Acquisition was the 'King', he ran the clock and led the ' Machine/Action State engine' to 'do the right thing, appropriate to the time' with the data.  See if this type of model is appropriate in your situation.

    Bob Schor

  • Implementation of different 'modes' in a VI

    Hi all

    I have a big project which currently has 3 trees of different sources:

    1. one that is used for the automatic simulation that takes jobs and validates the results automatically from a database. Just viewing on the front panel is an indicator of progress for the current simulation and the overall state of the simulation

    2. one who is used to simulate and validate the results in a log file. This is suitable for individual use and has nice graphics and other.

    3. Finally, one that acts as an interface with the hardware. At one point, and the Simulator individual (number two) were the same, but I shared to leanness in the code.

    My goal now is to merge all three of these features into one. They all have different facades and a little different state diagrams, but the base controller is the same throughout. My current setup looks like this:

    1.
    2.
    3.

    They are very similar, but they have their differences (different elements cluster in the clusters of two major illustrated, for one). I would just merge to be able to work on it all at the same time, rather than check the version the most recent one of my SVN, change it, hiring back and do the same thing in another version.

    I think I have a configuration file that defines a selector of cases, their initialization some globals function that allows me to mount a Variant like any cluster is appropriate for this mode. change the two main groups of variants of course.

    What do you think? Is it a futile exercise? Or y at - he deserves something to these mergers that overcomes the inherent difficulty?

    I object!  Is this "Class", or what?  If you create an abstract class that your different specific data can "fit in", you can develop algorithms that operate on the class and have each of your specific data inherits from the abstract class.  [I hope I said that right...].

    Bob Schor

  • How different modes of garbage collection?

    On http://na.blackberry.com/eng/devjournals/resources/journals/jan_2005/garbage_collection.jsp#programm... there are two modes of GC listed, but only a single API to perform the full pass. Is it possible to run a past further by programming? Thank you!

    As I said, the only way that you are able to instruct the JVM garbage collection is through the System.gc method. There is no other way around it - this, I think, is the same thing with J2SE as well.

  • Different mode of InDesign InCopy

    We use the assignment with InDesign and InCopy CS5 workflow all on Mac.  When our designers create the layout and create the assignment file, everything looks good on their end.  When the Editor opens the assignment file in InCopy, the provision will be off a few lines or massively off the coast.  The fonts are all correct for both users.  There isn't any strange text wrapping added.  If the editor will open the InDesign file in InCopy, it will appear straight.  This seemed to fix the problem once, but it doesn't have the 2nd time.  Is this a known bug?  Or y at - it a solution for this?  Examples:

    in Incopy:

    messed up 2.jpg

    In InDesign:

    good 2.jpg

    Try to export the INDD to IDML document and then reopen.

    Try to work on that.

    Bob

  • Can I boot in 32-bit mode?

    MacBook Pro 17 "(8,3) i7 2.2 GHz Quad Core 16 GB DDR3 750 GB HD OS X Mavericks 10.9.5"

    I am trying to connect to a USB 1.1 device which has incompatible firmware with 64-bit OS X.  The camera manufacturer's instructions for a workaround that allows access to the device to update the firmware, providing support OS X 64-bit.  Of workaround requires me to start in 32-bit mode by pressing the '3' key and '2' during the start cycle.  They show how to check and see if your Mac is in 32-bit mode, but their example does not match my window, and my machine doesn't seem to be in 32-bit mode.   I found several references to this '3' start + "2" keyboard shortcut, but nothing official from Apple.

    Please do not recommend upgrading the OS.  The software I'm using is not supported by the manufacturer past Mavericks.

    Thanks in advance for any help.

    If the software is compatible with the Mavericks like you state that the developer shows you should be able to use the device in 32 or 64 bit.

    When using any modification of the startup of the suggestion of anyone on the internet always proceed with caution, and damages are exclusively your own:

    Method 1: Start key combination
    This will bypass the default mode and use a different mode for single session.

    • If your Mac uses the 32-bit mode by default, press 6 and 4 at startup
    • If your Mac uses 64-bit by default, press 3 and 2 at startup

    Note: Your Mac will return to the default mode the next time it starts. Method 2: Setting disk
    This will change the default mode used by your Mac when starting. For 32-bit mode, use the following command in a Terminal:

    • sudo setkernelbootarchitecture systemsetup - i386

    For the 64-bit mode, use the following command in a Terminal:

    • sudo systemsetup setkernelbootarchitecture - x86_64
  • the iPhone camera App is not memorize the recording mode

    Hello

    I use the default photo from Apple on my iPhone App, especially because I can shoot while the iPhone is locked. No other applications can do that, not even using the Notification Center (other applications for registration as Strava can do it, but not to record video).

    However, I noticed that most of the time (but), mode (video, panorama, photo,...) is not like it was before.

    I turn almost only videos (idling, when outdoors). Whenever I start the camera application, either in the "sweep upward" screen (locked phone), or from the home screen in unlocking the phone, the camera always (or almost) default is still Photo. I have not found a way to default to the video.

    When you have to take action, it is very annoying to have to fumble with the buttons until you can actually draw. Not to mention that the app is so slow that initialize in the meantime, you cannot drag on the video mode (until the camera is completely initialized); then you drag too and the video mode Miss... it's a mess...

    However, sometimes, apparently when you start the camera after making a video, the unit starts in video mode... but you expect it to start in photo mode, you can already drag by anticipation and video mode Miss yet :-)

    The behavior is not very consistent.

    Unless there is something that the camera behave correctly, I think apple should seriously improve at least 3 things in the camera application:

    (1) in previous versions of iOS, the initialization of the camera was not otherwise slow. How about you do it as fast as it was before?

    (2) pass from still photo to video, then to move slow takes too long. The control must be more effective and faster. You should have a faster and more direct access to the different modes of recoding. How about a configurable "by scanning screen?

    (3) the camera app to set the frequency of default images for videos. What about settings for the default recording mode? (video, panoramic)

    Hi there redtomato,

    I understand that the camera on your iPhone app will automatically in video mode you want. If I always had to take videos, I think it would be very convenient to open the camera in video mode application every time I opened it.

    I tried what you said on my end, opening the camera my screen lock and video mode change application then blocking of my iPhone, and then repeat the same steps. Surprisingly, when I conducted my test of the camera to video mode application.

    I'm quite uncertain that if if it is a small problem with iOS, or if it was something that apple designed specifically, or maybe I'm just having chance repeating the steps you mentioned. To help troubleshoot your device, I recommend you to make sure that you use the latest version of iOS if your device is up to date. Once you have done this, try to restart your iOS device and see if you're still having problems.

    On reflection, maybe you can force the camera app to quit smoking? If this is the case, this could explain why you may need to manually change the camera in video mode application each time.

    I think your suggestions are great ideas, and if you want too, you can submit your ideas to Apple directly here: http://www.apple.com/feedback/.

    I love my iPhone and I like the camera on it and especially photography, so I can understand how you feel about the inconvenience, but I really hope the information I've provided help it it, otherwise, if all goes well it will be or is somehow.

    Continue to take great videos!

  • How to restart the computer in safe mode?

    Is there a way to restart the computer in safe mode UN-staged network, or at least to list computer startup options including safe mode, without having to wait for the computer to stop, then press on and hold F8 during initial computer boot?

    In particular, there is a command that I can enter from the cmd prompt?

    If it's important, I have a Dell Latitude D610 with MS WinXP Pro 2002 SP3.

    But I really want a method that works on any MS WinXP.

    You can configure your system to boot in any mode desired by using the msconfig utility.

    Click Start, run and enter in the box:

    Msconfig

    Click OK to launch the utility.

    On the BOOT. INI tab you can add/remove options to the boot.ini file so next time XP starts, it will start in the selected mode.  XP looks at the boot.ini file to decide how it is supposed to start.  You can use the built in Help and/or a few searches on Google to learn more about msconfig.  You will need to adjust things again if you want to start in a different mode, but there would be no F8 key.

    A word of warning.  Some malicious software now recognizes when you added the/SafeBoot option in the boot.ini file on your system.  The malware knows some of the things you could do to try to find and delete this... and he won't be deleted.  He wants you to think that you need to reinstall your XP instead.

    If your system has this condition and you add the option/SafeBoot, your system unbootable ever again successfully XP from hard disk in a different mode until you remove the option/SafeBoot your boot.ini file by starting on something else (like a CD) to manually remove the switch/SafeBoot.

    The switch / SafeBoot used to be pretty, a good idea, but it isn't a good idea these days.

    Do, or do not. There is no test.

    I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

  • How to pass the Overtype insert mode Editor?

    Somehow, I spent my editor in overtype mode.  How to return to insert mode?

    When I type the new text it replaces the text instead of being inserted in it. The position marker has changed from a vertical bar to a small rectangle.

    I have inadvertently pressing a combination of keys, but I don't know what it is. I don't find it in the documentation.

    Thank you!

    You can switch between different modes of selection by pressing or by clicking on the symbol in the status bar, see also here

  • Constant blue screen with different messages (0 x 24 & 0x7B). Everything OK, but nothing works.

    System Setup: Dell Dimension E520
    250 GB, 2 GB of RAM, Core2Duo, WinXP Media Center diskette, DVD, DVD - RW (2 Bay), PCI graphics card, SATA opeartion = ON RAID in Bios (a single drive - Western Digital WDC WD2500JS).

    One night (three weeks ago, beginning of December), the computer froze.  I made a stop hard and rebooted.  Since then, he has been constantly showing the blue screen.  I get the blue screen different to different modes.  Here are some cases.

    1. If I do a Safe Boot (with command prompt) it stops on MUP.sys and then turn off for a second and then shows blue screen.
      This shows blue screen STOP: 0 x 00000024 (0 x 00190203, 0x89B8B8B0 , 0xC0000102, 0x00000000)
    2. If I do a Safe Boot (with networking) it makes a break on MUP.sys and then turn off for a second and then shows blue screen.
      This shows blue screen STOP: 0 x 00000024 (0 x 00190203, 0x892629F8 , 0xC0000102, 0x00000000)
    3. If I do a Safe Boot it stops on MUP.sys and then turn off for a second and then shows blue screen.
      This shows blue screen STOP: 0 x 00000024 (0 x 00190203, 0x89B8C8B0 , 0xC0000102, 0x00000000)
    4. To last good known cofiguration (shortly shows black screen Windows XP for the loading of components and then shows blue screen.
      This shows blue screen STOP: 0 x 00000024 (0 x 00190203, 0X894A28B0 , 0xC0000102, 0x00000000)
    5. If I Regularly Windows XP it stops after a black screen with the logo of Windows XP and then shows then the blue screen.
      This shows blue screen STOP: 0 x 00000024 (0 x 00190203, 0x89DEC9F8 / 0x89DEB9F8 / 0x89DD99F8 , 0xC0000102, 0x00000000) continues to change the middle number.

    I tried to boot from LiveLinux (OpenSuse) and it seems to work perfectly.  I am able to access all files and able to run memory tests.  Memtest passes all iterations of several that I did.  Furthermore, I used (provided with this high-end system) system diagnostic tools, and passes all the tests of memory, hard disk of the Office.  I did as well detailed tests.  Everything seems to work with Linux, and also for diagnostic tests, so I'm lead to believe that the material works very well.

    Then I tried to re - install the XP.  When I insert the XP Setup disk, it starts to load files and then displays the message 'Setup starts windows' for a few seconds, and until it reaches to show me any system selection prompt goes blue screen.
    This shows blue screen STOP: 0x0000007B (0xF78DA63C, 0xC0000034 , 0x00000000, 0x00000000)

    Because I can't get into any time except Linux, I'm really lost here.  I want to be able to start the windows mode that's before the crash, and now I'm lost.  Help, please.

    HI -.
    I was able to identify and solve the problem by fixing the MBR.  Since Linux working and Windows are not even in the installation program, it lead me to a clue.  I also enjoyed that it was a DELL machine.  So I basically ran a utility which sets the master boot record (MBR) and the partition information.  This allowed me to access the Dell restore partition.
    I could have checked once I fixed the MBR and tried to see if the problem is solved, but I missed it and simply returned in orginal factory State, once I was able to get the image-Ghost in the recovery partition.
    Thanks to Dan for the detailed documentation and the tool here:

    http://www.goodells.NET/dellrestore/fixes.htm

    I write this so that if anyone else runs into this can solve the problems.
    See you soon

  • I was browsing in the Windows Vista Welcome Center (then) I was in the dark... SAFE MODE

    I was in the configuration of the system trying to make my computer faster.  I hit a button and now I ' m always logging in safe MODE...» How irretating.  Could someone please help.  I tried to restart in a different mode, but failed.  Thank you all.

    Hello

    Try doing a search on msconfig.exe

    Click Start and then click Run. The Run dialog box is displayed.
    3 type msconfig, and then click OK.
    4. the System Configuration utility appears. Uncheck the "/ SAFEBOOT" option, and
    and then click OK.
    5 poster then invites him to restart the computer. Click on restart

    ---------------------------------------------------------------------------------------------

    The path to MSCONFIG is:
    c:\WINDOWS\PCHealth\HelpCtr\Binaries\msconfig.exe
    So yes you can run it from the command line.
    Launch it and undo what you checked or simply select NORMAL on the first screen.

    Hope this might help you

  • Not silent silent mode

    OK, so I'm still working on how the silent modes work on my Z3. I'm a failure.

    It seems so you can press the volume button and clicking on the icon "Bell", I can go through 3 different modes: Loud, vibrate and silent.

    Seems simple enough, only none of these silent applications or games to all modes.

    I just want to put my phone on silent/vibrate and I know that even applications and games will be silent too.

    I thought I would put on vibrate mode and drag the media zero volume and it would remember it... then put in strong mode would make media slider back to normal volume?... No, I have to come back to fashion strong and remember to drag the media back to normal volume...

    Should I really manually, change the mode, and then click the cursor buttons slide media zero volume... and don't forget to slide up EVERY time?

    Is it still possible to have vibrate silent mode everything (except alarms!) and then strong mode have a normal volume once again?

    Any help appreciated.

    Thank you

    If anyone is interested, I fixed that with a workaround.

    The issue is inherent bad design on Android OS, but I'm sure that Sony could fix.

    An application called Media-Mute in app store has solved the problem and when you turn off your phone by vibration or silent mode, it also silenced media apps without having to use additional hidden media volume slider.

    Sony (or Google) Please fix that and improve on stupid Android to cut your phone just like apps/games/media is muted. I don't mind given the option to turn off the alerts and media/apps separately, but it should be by default to mute when muting phone... with additional long-term steps to have the media strong but alerts cut or whatever.

  • Focus adjustment camera mode

    G ' Day,.

    I'm trying to set the camera focus mode and have encountered a problem.  Modes of return of camera_get_focus_modes (*) indicate that six modes of development are now supported.  But when I try to put one of these modes via a call to camera_set_focus_mode (*), that the call returns

    CAMERA_EOPNOTSUPP

    who is documented as meaning: "the function call failed because the requested operation is not supported.

    Is it simply an artifact of the DevAlpha?  In other words, the modes of development returned by camera_get_focus_modes (*) * will * be implemented by real hardware, but not on the DevAlpha?  Or I'm doing something stupid blinding?

    EDIT: With the help of DevAlpha B.

    Thanking you in advance... - Sam.

    The viewfinder must run first.

    There is here a sample which passes through different modes of development:

    https://github.com/BlackBerry/presentations/tree/master/2012-BlackBerryJam-Americas/JAM15/focus

    See you soon,.

    Sean

  • Warning in VCS and TMS (inherited from TMS Agent mode)

    Hello.

    I have this massage in TMS and VCS system, how this fix?

    in TMS: #2057 - Configuration Warning - The VCS is running in a mode inherited from the officer of TMS; It is recommended to switch your system to use another mode.

    in VCS: the VCS is running in a mode inherited from the officer of TMS; It is recommended to switch your system to use another mode

    How to switch different mode?

    Thank you

    If you are not Provisioning - remove the key to implementation of the VCS.

    In the web interface, go to the maintenance, options keys, select the configuration key and press delete.

    (it might be helpful to take note of the key first, where you decide in the future that you want to install it again - but it can be retrieved otherwise if you lose, IE from the Cisco Licensing Portal).

    Wayne
    --
    Remember the frequency responses and mark your question as answered as appropriate.

Maybe you are looking for