Consolidation of DB - Cost Cutting

Similar Questions

• M2727 fails. You are looking for Pro Tips.

  M2727 all-in-one will not initialize. Many people have posted questions. A convenience store told me that it was either hardware fax (8 error several times, prompting to restart the computer) (~ $ 300) or if it wasn't her, the motherboard (another ~ $ 300).

  New printers are less - which I'ved ordered. I like the HP products, always have. However, critics of the new devices indicate quality problems and I don't know of a cost cutting seen there's pressure there. Here, there is a long-term trend that many customers tell us also about the feeling of ' I give up on HP ". Another mfg are adding features and build solid devices. I'm happy to pay for quality - but it should work.

  A Pro's advice for what to do with this printer? I converted it (boxed) upward, and instead of trashing it, I'm happy to send to HP for review. What is an unreasonable request? I'm not asking so he can be repaired or replaced, just LEARN and improve your products or your media base will continue to migrate to other MFG. printer clients are very loyal - I consider myself to be an HP customer. AND I am increasingly frustrated with the trends that I see.

  It seems that you have a problem of trainer and you need to use on options below.

  1. consider an authorized Service provider

  How to localize an ASP.

  Partner Locator

  2. call 1-800-HP-Invent to open a ticket.

• Adaaddls.pls in aidmcl() runtime error

  I'm moving to ebs 12.2. of 12.0.6.

  Docs used are: http://docs.oracle.com/cd/E26401_01/doc.122/e48839.pdf

  Oracle E - Business Suite Guide upgrade

  After completing the upgrade of pre and post installation, I got to the step:

  9 apply AD 12.2 update driver (required) download and unzip the Patch to upgrade the AD to 12.2 (patch 10117518). Follow the instructions in the patch readme file for use AutoPatch for run from the Run 12.2 file system. Important: AD Upgrade Patch for 12.2 (patch 10117518) patch readme contains information about the last consolidated Upgrade Patch (CUP) for AD. You must follow the patch 10117518 readme and apply it after the merger with the last consolidated AD Upgrade Patch (CUT), by following the instructions in the readme file. ATTENTION: Make sure that the file system files RUN 12.2 environment comes before you apply this hotfix.

  When executing adpatch of new software, I get:

  sqlplus-s APPS_NE / * @/u02/oracle/DESE/fs1/EBSapps/appl/ad/12.0.0/patch/115/sql/adsqlwrapper.sql ' /u02/oracle/DESE/fs1/EBSapps/appl/ad/12.0.0/patch/115/sql/adaddls.pls * APPS_NE *'

  SP2-0642: SQL * more internal error state 2165, context 4294967295:0:0

  Impossible to continue

  An error occurred during the execution of SQL * more script.

  Continue as if it was successful [No.]: Yes

  sqlplus-s APPS_NE / * @/u02/oracle/DESE/fs1/EBSapps/appl/ad/12.0.0/patch/115/sql/adsqlwrapper.sql ' /u02/oracle/DESE/fs1/EBSapps/appl/ad/12.0.0/patch/115/sql/adaaddls.pls * APPS_NE *'

  SP2-0642: SQL * more internal error state 2165, context 4294967295:0:0

  Impossible to continue

  An error occurred during the execution of SQL * more script.

  Continue as if it was successful [No.]: No.

  Adaaddls.pls in aidmcl() runtime error

  You must check the file

  /U02/Oracle/dese/FS1/EBSapps/appl/Admin/dese/log/u_10117518_cup5.log

  Could someone give me a sollution for this?

  Thanks in advance.

  Problem solved after using FNDCPASS and APPS_NE internally to change the password.

• Backup failover

  Hi all
  
  I'm testing a failover to my database pending. I want to make my day as principal. But when I try to start open the day before, I got the error message saying that the database was not a watch :(
  
  What do you think I forgot?
  
  Thank you
  
  zxy

  yxes2013 wrote:

  Internal primary means, only attached to the primary? In this same point No.

  If I cost cutting, why is a disc of editing not possible to do remote? :(

  Then make sure that you are capable of transporting archives as soon as they are generated on the primary. No other option.
  Or you can see the option of alternative with good pack http://www.dbvisit.com/products/dbvisit_standby_database_for_oracle_disaster_recovery

  When in fact the standby mode only reads the disc?

  Nope, Archive log is dumped online journal primary file won't use once if it is checked.

  Yes I know my dear :), but that means is that the primary is currently unloading redo online connect you for the format of newspaper archives (ongoing and not yet completed), the day before already caught and apply it to its database. Something as they are access codes.

  AM not saying put online redo log files in the shared location, only archives location what ever you mentioned in "LOG_ARCHIVE_DEST_n.
  In addition, it has nothing to do to sleep with primary online redo logs, when there is no link between them.
  Understand what mean?

• SmartView offline

  A hope that someone can help me understand the Smartview. Specifically, I was wondering if it was possible to have a smartview user open a data form in smartview and then send the blank form to a "no". "." Then the progressive form and refers to 'the user '. The 'user' then submits the data. Is this possible? Or should everyone involved in the process of a smartview license? THX.

  Hello
  Although it is not completely compatible with the ultimate idea to have a completely decentralized solution, it's how many have chosen to move forward for cost cutting purposes. Check with your account manager Oracle, but I see really no reason why it should cause no problem with the license.

  See you soon,.
  Alp

• SOA Suite components on JBoss - not possible?

  Hello
  
  I am currently evaluating the Oracle SOA products for a new project.
  
  We would like to use JBoss instead of OC4J and Oracle BPEL Process Manager, Oracle ESB and Oracle Web Service Manager to use.
  Running on OC4J is not possible, especially since Oracle will be replaced with Weblogic in the next version.
  
  What I found are instructions for installation of BPEL PM and all of the SOA Suite on JBoss.
  These are VERY COMPLEX and BINDING (two tasks must be installed manually semi) facilities and I have not been able to grow my first attempt.
  For environmental stewardship and WSM I saw no information at all.
  
  We have yet to purchase the products, and I must say that it is a very bad start in the assessment of the quality of the product and the quality of care.
  Please specify if Oracle support for alternative application servers are in the cards or also in reality.
  If we buy the components, we will have access to other installable directly running on JBoss?
  
  If anyone has a good experience with Oracle SOA on JBoss, I'd be glad to know.
  
  Kind regards
  Fabian

  Fabian,

  Support of Oracle for other application servers such as Websphere, WebLogic, JBoss, etc. is more a marketing story that something that people do in practice. Oracle is not to lose a sale because a customer has a strategic alliance with a particular application server. So they support SOA Suite on the main competitors. A permit is a dark art and I could not give you a 100% guarantee on how SOA Suite is sold but to get SOA Suite you have enterprise license server Application. SOA Suite is above that. If you turn it if you buy SOA suite you get Oracle Application Server enterprise edition (including OC4J) for free.

  So if you look at using JBoss for a cost cutting exercise that I do not have licenses to Oracle will help you.

  For SOA Suite installation is the installation for ESM + WSM, there is no separate installation for these products for thrid party application servers. So you the topology is not as flexible as it could be you used Oracle Application Server.

  Your option on SOA (BSE, WSM) is an option with the document provided in the previous post.

  When I say Oracle Application Server that's Oracles existing non-logical Web application server. Currently there is a progression of Portage OC4J Weg logical apps, this should be completed the arrival of 11g. He has a little release the version before that happens, each offering more features.

  If I were you, I would have understood the price of the SOA Suite on JBoss as affixed to Oracle Application Server. If the price is close then I would go with the help of the Oracle Application Server. If you want to use the BSE, I would go with Aqua Logic installed on WLS. Currently the SOA Suite is not certified on the 10.3 release therefore keep on the Oracle application server. There will be a migration to 11g path next year.

  see you soon
  James

• Issue of Satellite A100 - 159 LCD - Photo cut into horizontal pieces

  Hello

  For three days I have very strange problems with the LCD screen on my laptop. Imagine the normal image, cut it into horizontal pieces and place pieces randomly above the other.
  This 'strange' combination vertical rolls on the screen. A few minutes later, he stops and the screen shows me a gradient of one color.

  With a keyboard shortcut, the laptop is on stand-by. With the power on button, the laptop leaves Eve and the screen working again normally.

  It happens once or twice a day...

  An external screen works normal, while the LCD is weird, so I guess there is no problem with the graphics card. Can someone explain this strange behavior?

  One last thing, this laptop 13 months now, so I guarantee expired :-(.

  Thanks in advance,
  Jochen

  (PS English is not my native language, I apologize for the errors and I still think that Toshiba is the best :-)

  Hello Jochen

  According to your explanation of the problem it is probably problem with graphics card. Please understand that simply test with special tools can give you a definitive answer. I don't really know what is the best solution.

  Try to speak with service and ask how much laptop repair cost.

• Satellite Pro A60 cuts off after 3 minutes

  Hello

  work in IT Support generates many puzzles, but I currently have a Satellite Pro A60 which cuts off after 3 minutes.
  I have deleted the main CPU fan and have noticed that the VGA Chip Set fan fails.

  It is not at all which makes me think that it is completely broken or there is a problem with the motherboard.
  Who is more likely and if not card mother, can I buy a VGA heatsink thermal elemnet / separate fan and if so what is the part number and ball park cost?

  Matthew

  Hello

  As you already suggested this strange faucet portable bottom may be related to high temperature and to overheating.
  You are right; the malfunction of the fan could be a reason to close automatically and sometimes down.

  > can I buy a VGA heatsink thermal elemnet / separate fan

  Usually, the cooling modules are pieces separately and can be replaced.
  But notebooks disassemble and replacement of cooling modules is not easy and a little more difficult for someone who has no experience and never changed something like that. It s just too risky, because this person may damage the motherboard very easily.

  So, it's probably best to contact the technician of specifications for these s replacements!
  The ASP can command the support of the head of Toshiba warehouse cooling modules and compatible and could replace it.

  Best wishes & congratulations buddy ;)

• Using a microphone (3FF SIM) cut to the size of Nano (4FF)

  In a word don't - I have not tried, but I had to reinstall my nano (4FF) several times while trying to activate my phone. (Has proved to be a problem of computer VZW)

  There are very little release for thickness in the slot for SIM - so tight he wants to push the slotted end of the sim card up on the little tray that you are trying to reinsert.

  Older micro sims can be cut to length and width nano size but not in thickness. The older micro sims are about 15% thicker. You might be able to force it in, but you can not even get it w/o of costly repairs.

  I have also heard the nanotechnology necessary sim for these phones have NFC capabilities.

  So cut a standard sim card or microphone may not work properly.

• Second 64 Vista clean install from upgrade costs DVD, $99?

  My first Vista 64 installation was a clean installation of a DVD upgrade, that I have upgraded XP, and only a clean install was possible, then (2005). I chose Vista, he was then (and I think still is) only possible to use my ASUS mobo to combine with this OS PCI video card.  The hard drive died recently, and after I reinstalled on a new hard drive and made the odd updates hundreds, telephone support assured me it's 100% possible for them to turn it on again, but as that (I think change remote registry) process was "Advanced Troubleshooting", it would cost $99.  I asked to speak to his supervisor, and after a wait, the line was cut off. I called back, got the same result, and after a long wait, the second tech supervisor told me the same thing, with a reference to an article that pointed out that if I reinstalled a previous operating system of microsoft and started the process of upgrading within this installation of windows, it would activate.  I tried the first time, and the upgrade option has been grayed out, so I think it won't, if I go to XP.

  Do I use? Or do I have to buy Vista again?

  Hello

  When you have a version upgrade of Windows, you must install the previous operating system before installing the upgrade.

  Once you install Windows XP, you must install all security and optional updates for unity.  When you are finished, you install the upgrade.  It can then be activated.

• If my connection interrupted by the ISP, my connection broadband (PPPoE) on my windows 7 freeze and it does not cut, and he does not answer to disconnect click.

  If my ADSL connection disconnected by the provider of the connection on my computer freezes instead of disconnect!

  As the title suggests, if my connection interrupted by the ISP (for example: Internet service provider who use dynamic IP automatically disconnects after 24 hours permanent connection), my connection broadband (PPPoE) on my windows 7 freeze and it does not cut, and this isn't answer to disconnect click, even if I uninstall the Ethernet card, keep the connection.

  Everything else works fine, and the only way to connect to the Internet is to restart my pc.

  Also if the connection is disconnected due to a traction cable or ADSL Modem power connection broadband (PPPoE) on my PC disconnect normally without any problems and I can reconnect without any problem.
  any help with this.

  Hello

  PPPOE software th whole arrangement never worked well from the first day more than 10 years regardless of the operating system.

  So most serious DSL carriers actually give free Modem/Router so that authentication would be by the side of the router WAN.

  They give it for free for phone support for this problem cost them more than the $10 adds the router to the Modem

  For example, get a router, simple routers in the United States are sold for less than $15.

  Router solved the problem PPPOE provides, security with NAT firewall, and stream DSL is actually faster than with authentication of software.

• Consolidation/merger 4.2 ACS servers

  Hi, we have 2 servers ACS each handling of different sets of hundreds of devices. I need to merge 2 databases (users, groups, and devices) in a third 4.2 ACS server.

  My thoughts are to make a backup of one and do a restore on the new server. Now, I need to find a way to import users, groups, and devices of the second ACS server in the new consolidated CAs. I searched and I have not found a way to import users, groups, and devices without removing the devices that have been added since the first ACS sever. Does anyone have recommendations?

  Try this. On each ACS server, run CSSupport (or support in ACS Admin page) to generate a cab package.

  If you open the booth there will be two files CSV - one for NDG and one for devices.

  Using excel you can merge these two CSVs. To find data ACS, you will need to create an account actions CSV file and deal with RDBMS synchronization.

  Action code 250 adds a NDG

  220 action code add one unit of

  Action code 252 assigns the device in NDG

  This may seem like a chore, but its largely a cut and paste exercise.

  If you regularly use RDBMS sync to add your devices this means that you will always have a file of shares of update that you can throw to another server if you wish.

  Lots of information about sync of RDBMS to http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.1/user/A_RDBMS.html

  The easiest way is to download the SQL Anywhere Developer tools and ask for Cisco on the loading tables ndg and device directly from CSV files. It can be done, but I doubt they'll give you the password in its database.

• Print at cost-co of LR CC

  I use LR CC, 2015.6, Mac, OS X El Capitan.  Working from the module library, file, export to cost-co using the Alloyphoto plugin. I am trying to print a 4 x 6 test, 300 dpi. I also want to do the same for a single page with 2 5 x 7 that I have implemented in the module printing, also 300 dpi.  I am connected successfully account cost-co.

  I get the following message is displayed and you need to know what specific measures to solve: the Image size is too small. Image sizing in force: resize according to the width and the height, 4 x 6 inches, resolution: 300 pixels per inch. The images that result will be too small.  Are you sure you want to continue?

  Please help, even towards a clear and concise site with an explanation would be appreciated. Thank you.

  I've never heard the alloy photo plugin before, so I Googled it. I print at costco all the time but always export myself and download JPEG files resulting. I would like to cut the plugin previously. There are two things you must do first who are the fact that you must make sure you crop the size of the right image you want to print either in the export Panel, either by printing to JPEG since the printing module (the easiest way if you do not want to create a large number of additional virtual copies). So, you want to make sure that you have enough pixels left over. If you strongly cropped your image, you will not have to required 1800 x 1200 pixels for a photo of 6 x 4 to 300 ppi. It's probably what complains about the plugin to check that first. Just hit the I touch to switch between the views of different information. Let's show the size of the original image in pixels.

  A good workflow to print a series of images at costco to 4 x 6 is to set up a page in the control panel to print 4 x 6 size personalized with an image covering the whole of the area (margin zero). Set the image to scale to fit and autorotation. Choose sRGB as the color space and set the resolution to 300 ppi. Choose sharpening for printing on matte paper or glossy depending on what you plan to print on medium or high. Low sharpness is not aggressive enough for the machines of costco. Print to JPEG format, then set your Web browser to costcophotocenter.com. Download images (be sure to choose the option full resolution) and print the entire album to the size that you set in the printing Panel. Do not print in any other size. This will give great quality prints and won't require a plugin. You also don't you complaints about the resolution of the image as Lightroom will all be just high-end of the smaller images.

  If you know what you're doing and calibrate your computer screen, you can always get the best quality using the icc profiles costco makes available at drycreekphoto.com in the printing Panel. Be sure to select to the perception that the rendering mode (the relative intent can cause Posterization) and export. So you want to remove the icc profile, because it adds on a megabyte each jpeg and printers ignore it anyway. I have to do this, use a simple photoshop droplet, but there are many other ways. Also, you want to disable the automatic color correction to the costco Photo Center. This gives very good color reproduction.

• Form of planning data cut the names of members with "<" or ">" in the name

  We have recently updated to 11.1.2.3.500 (patched to 11.1.2.3.501 Planning) and noticed that on our forms of planning data, it's cut the names of the members so ">" or "<" are in the name of the Member.

  For example, we have the following Member: ' cost-per-minor Suite Tower (< 5K).

  In EPMA, planning, Essbase and financial information, the name of the Member fine poster Dimensions. When we use the Member in a data form, it displays as "cost per minor Suite Tower ()"-it cuts the ' < 'and everything after it. "

  We tried to recreate the shape of data, but it still cut the name of the Member. There is no alias on this member, and we have it just show the name of the Member.

  
  

  If anyone has experienced this before? As much as I know aren't restricted characters, but maybe something with 11.1.2.3.500 coding and the thought those who are part of the tags.

  
  

  Thank you in advance for your help!
  

  We had a similar problem with & in smarlist and patch.502 to be fixed. However, I put in "cost per minor Suite Tower (a member of your).< 5k)"="" in="" the="" .502="" environment="" and="" i="" saw="" the="" same="" issue:="" where="" "cost="" per="" minor="" suite="" turn="">< 5k)"="" cuts="" off="" to="" cost="" per="" minor="" suite="" turn="">

  and I tried just "cost per minor Suite turn."< 5k"="" and="" it="" provided="" this="" cost="" per="" minor="" suite="">

  We also have a 11.1.2.4 environment, I tried this and the question even exsits.  And I guess the only work is about setting out there because that's what they gave us said regarding the & in smarlists.

• [Adobe Premiere 5.5] Audio is cut in half

  I noticed that I have audio problems in video clips later. The first approximately 55 clips (MOV001. MOD to the MOV032. MOD (hexadecimal), imported from a camcorder to memory) are fine, but BLAH then on the audio is cut in half which means that I heard the first half, then the sound is completely absent, until the next clip. Then you hear the first half of the audio and then it's completely absent again.

  [Audio is cut in two, because I have too many items in the current sequence?]

  If I open the files in another program, that the audio is full start at the end.

  EDIT: I discovered that the number of clibs in Prem Pro is not serious. If I start a new project, a new sequence and I put some of the clips later in the sequence, the problem persists in these clips.

  Het bericht is bewerkt door: Hans Kamp

  I found a solution to this problem (initially by browsing the topics elsewhere on the internet with a similar problem):

  -Download the handbrake;

  -Specify the map where the source of all (to convert) are;

  -Specify the plan where all destination must be stored;

  -Start the conversion;

  -In Adobe Premiere Pro, specify the new files and add them to the storyboard table.

  Then I see that it is therefore more an audioproblem.

  In a program that costs about 1000 euros (not in the case of promotion code), I would expect it doesn't have these problems.