Constant BSOD, even after the restoration.

Similar Questions

• Question of Bootcamp, even after the restoration process...

  Hello

  I still have this problem Bootcamp launch even after trying restore OS X via Internet and Time Machine

  Please can someone help me rebuild my disk of any merger manually?

  

  Here is my list under terminal diskutil:

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * TB 2.0 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage Macintosh HD 1.4 TB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: EFI 104.9 MB disk0s4

  5: disk0s5 Apple_HFS UNTITLED 16.8 MB

  6: EFI No. 104.9 MB disk0s6 NAME

  7: Apple_HFS BOOTCAMP 543,5 GB disk0s7

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk1

  1: EFI EFI 209.7 MB disk1s1

  2: disk1s2 Apple_CoreStorage Macintosh HD 121.0 GB

  3: disk1s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk2 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 1.6 TB disk2

  Logical volume on disk1s2, disk0s2

  BFB9BB15-3247-48C4-A376-F329FBC563C3

  Fusion unencrypted drive

  Thanks a lot for your help

  Do you have a backup of Mac OS x Time machine?

  Please after the release of cs diskutil list.

• Recurrent BSODS even after the repair facility. Hardware failure? Driver conflict? Help, please!

  I was troubleshooting my BSOD for about a week and I need help.

  Here's where I am. I cleaned the chassis and reinstall all components. Then I ran memtest for 8 passes without error. Then I got Majorgeeks through my dieting rigorous anti-malware. And there is no malware on the computer.  I could not find any obvious driver conflict. So I ran SFC/scannow and it found some errors, he couldn't fix. So I finally did a repair installation to see if file system cleaning would eliminate blue screens.

  I always get a BSOD.

  Which leaves me with what? A bad GPU? Unknown driver conflict? Bad motherboard?

  Here comes bluescreenview log for you to look over. If someone could help me please clarify, I'd appreciate it really any help I can get.

  Thank you.

  ==================================================
  Dump file: 073014-27892 - 01.dmp
  Crash time: 30/07/2014-15:26:46
  Bug Check String: IRQL_NOT_LESS_OR_EQUAL
  Bug check code: 0x0000000a
  Parameter 1: 00000000'00000088
  Parameter 2: 00000000'00000002
  Parameter 3: 00000000'00000001
  Parameter 4: fffff800'03656666
  Caused by the pilot: NDProxy.SYS
  Caused by the address: NDProxy.SYS + c8856a
  File description: NDIS Proxy
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 6.1.7601.17514 (win7sp1_rtm.101119 - 1850)
  CPU: x 64
  Plant address: ntoskrnl.exe + 75bc0
  Stack address 1:
  The stack address 2:
  Address 3 the battery:
  Computer name:
  Full path: C:\Windows\Minidump\073014-27892-01.dmp
  Number of processors: 6
  Main version: 15
  Minor Version: 7601
  Size of the dump file: 286 280
  Dump of file time: 30/07/2014-15:27:42
  ==================================================

  ==================================================
  Dump file: 073014-27892 - 01.dmp
  Crash time: 30/07/2014-15:26:46
  Bug Check String: IRQL_NOT_LESS_OR_EQUAL
  Bug check code: 0x0000000a
  Parameter 1: 00000000'00000088
  Parameter 2: 00000000'00000002
  Parameter 3: 00000000'00000001
  Parameter 4: fffff800'03656666
  Caused by the pilot: NDProxy.SYS
  Caused by the address: NDProxy.SYS + c8856a
  File description: NDIS Proxy
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 6.1.7601.17514 (win7sp1_rtm.101119 - 1850)
  CPU: x 64
  Plant address: ntoskrnl.exe + 75bc0
  Stack address 1:
  The stack address 2:
  Address 3 the battery:
  Computer name:
  Full path: C:\Windows\Minidump\073014-27892-01.dmp
  Number of processors: 6
  Main version: 15
  Minor Version: 7601
  Size of the dump file: 286 280
  Dump of file time: 30/07/2014-15:27:42
  ==================================================

  ==================================================
  Dump file: 080114 43243 - 01.dmp
  Crash time: 08/01/2014 12 h 22:50
  Bug Check String: IRQL_NOT_LESS_OR_EQUAL
  Bug check code: 0x0000000a
  Parameter 1: 00000000'00000088
  Parameter 2: 00000000'00000002
  Parameter 3: 00000000'00000001
  Parameter 4: fffff800'036 has 3666
  Caused by the driver: vga.sys
  Caused by the address: vga.sys + 2a7f56a
  Description of the file: VGA/Super VGA video driver
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 6.1.7600.16385 (win7_rtm.090713 - 1255)
  CPU: x 64
  Plant address: ntoskrnl.exe + 75bc0
  Stack address 1:
  The stack address 2:
  Address 3 the battery:
  Computer name:
  Full path: C:\Windows\Minidump\080114-43243-01.dmp
  Number of processors: 6
  Main version: 15
  Minor Version: 7601
  Size of the dump file: 285 832
  Dump of file time: 01/08/2014-12:24:17 AM
  ==================================================

  ==================================================
  Dump file: 080114-29359 - 01.dmp
  Crash time: 01/08/2014-16:14:11
  Bug Check String: IRQL_NOT_LESS_OR_EQUAL
  Bug check code: 0x0000000a
  Parameter 1: 00000000'00000088
  Parameter 2: 00000000'00000002
  Parameter 3: 00000000'00000001
  Parameter 4: fffff800'03663666
  Caused by the driver: USBPORT. SYS
  Caused by the address: USBPORT. SYS + 1156 has
  File description: driver Port USB 1.1 & 2.0
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 6.1.7600.16385 (win7_rtm.090713 - 1255)
  CPU: x 64
  Plant address: ntoskrnl.exe + 75bc0
  Stack address 1:
  The stack address 2:
  Address 3 the battery:
  Computer name:
  Full path: C:\Windows\Minidump\080114-29359-01.dmp
  Number of processors: 6
  Main version: 15
  Minor Version: 7601
  Size of the dump file: 286 344
  Dump of file time: 01/08/2014-16:15:09
  ==================================================

  ==================================================
  Dump file: 080414-142319 - 01.dmp
  Crash time: 08/04/2014-21:24:14
  Bug Check String: IRQL_NOT_LESS_OR_EQUAL
  Bug check code: 0x0000000a
  Parameter 1: 00000000'00000088
  Parameter 2: 00000000'00000002
  Parameter 3: 00000000'00000001
  Parameter 4: fffff800'03662666
  Caused by the driver: ntoskrnl.exe
  Caused by the address: ntoskrnl.exe + 75bc0
  File description: NT kernel & system
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 6.1.7601.18409 (win7sp1_gdr.140303 - 2144)
  CPU: x 64
  Plant address: ntoskrnl.exe + 75bc0
  Stack address 1:
  The stack address 2:
  Address 3 the battery:
  Computer name:
  Full path: C:\Windows\Minidump\080414-142319-01.dmp
  Number of processors: 6
  Main version: 15
  Minor Version: 7601
  Size of the dump file: 286 544
  Dump of file time: 04/08/2014-21:25:25
  ==================================================

  Thank you!

  IRQL_NOT_LESS_OR_EQUAL (a)

  This indicates that Microsoft Windows or a driver in mode accessed kernel memory paged at DISPATCH_LEVEL level or above.

  This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high. The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.

  Bugcheck A, {88, 2, 1, fffff80003662666}

  0: kd > k
  Call child-SP RetAddr site
  fffff800'00b9c038 fffff800'03681169 nt! KeBugCheckEx
  fffff800 '00b9c040 fffff800' 0367fde0 nt! KiBugCheckDispatch + 0 x 69
  fffff800'00b9c180 fffff800'03662666 nt! KiPageFault + 0 x 260
  fffff800 '00b9c310 fffff800' 03685df3 nt! KeInsertQueueApc + 0x42
  fffff800 '00b9c370 fffff880' 04a96f16 nt! IopfCompleteRequest + 0xb63
  fffff800 '00b9c460 fffff880' 04a64fb7 usbhub! UsbhPdoInternalDeviceControl + 0x4fe
  fffff800 '00b9c4b0 fffff880' 014da2b0 usbhub! UsbhGenDispatch + 0 x 57
  fffff800 '00b9c4e0 00000000' 001eed06 ffusb2audio + 0x52b0
  fffff800 '00b9c4e8 fffff880' 016884ba 0x1eed06
  fffff800 '00b9c4f0 fffff800' 0368c85c tcpip! TcpPeriodicTimeoutHandler + 0 x 714
  fffff800 '00b9c570 fffff800' 0368c6f6 nt! KiProcessTimerDpcTable + 0x6c
  fffff800 '00b9c5e0 fffff800' 0368c5de nt! KiProcessExpiredTimerList + 0xc6
  fffff800 '00b9cc30 fffff800' 0368c3c7 nt! KiTimerExpiration + 0x1be
  fffff800 '00b9ccd0 fffff800' 036798ca nt! KiRetireDpcList + 0 x 277
  fffff800'00b9cd80 00000000 00000000' nt! KiIdleLoop + 0x5a

  ffusb2audio.sys (driver of USB 2.0 audio Focusrite) refers to an invalid memory (0000000000000088).

  0: kd > lmvm ffusb2audio
  start end module name
  "fffff880 ' 014 d 5000 fffff880 ' 014e7000 ffusb2audio T (no symbol)
  Loaded symbol image file: ffusb2audio.sys
  Image path: ffusb2audio.sys
  Image name: ffusb2audio.sys
  Timestamp: Wed Oct 13 11:40:18 2011

  Very old driver, I recommend just completely uninstall the software and remove the device (if any).

  Kind regards

  Patrick

• How to eliminate the split after the restoration of browser screen?

  FF 29.0.1 running on OS x 10.8. From time to time, from FF (after killing him) and the restoration of all sessions, results in each window with tabs displayed in a split screen. The upper part is about 4 "high, followed by a seam, then the site itself. Resizing can completely eliminate the useful portion--unable to shrink beyond the joint.

  Open a new tab results in a screen divided; Open a new window appears normally.

  The problem occurs only after the restoration of the tabs - never when FF is normally closed.

  Suggestions?
  Thank you.

  Hi nxtr, your test Mode without fail gives strongly suggests that one of your extensions is to create the gap.

  If you have not checked recently updates to the extension, you can do it from the page modules. Either:

  • Command + shift + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then, above the list, click on the "gear" button Check for Updates.

  If they are already up-to-date, you can try to disable selectively non essential. I hope that the problem is caused by one of.

• Since this morning updated (01/11), my policy is so tiny that I can't read anything. This, even after the DOUBLING of the size of my font in tools. Unless this is addressed, I can't use Firefox more, because I don't SEE anything.

  Since this morning updated (01/11), my policy is so tiny that I can't read anything. This, even after the DOUBLING of the size of my font in tools. Unless this is addressed, I can't use Firefox more, because I don't SEE anything.

  I tried NoSquint (looked simpler) and that did the trick... I am now back to where I was before this upgrade. Thank you.

• Firefox continues to run even after the release in Manager Windows tasks and has about as much memory to affect other applications

  Firefox continues to run even after the release in Manager Windows tasks and has about as much memory to affect other applications. Firefox.exe must be completed manually in Windows Task Manager. Is there a software patch that will force the release of memory and all the resources of the computer that was using Firefox, when it is finished?

  This has happened

  A few times a week

  == I see only the program in the Manager of tasks over the past months but the problem could took place for more

  See this:
  https://support.Mozilla.com/en-us/KB/Firefox+hangs#Hang_at_exit

• Problem of scanning even after the use of HP print & scan doctor

  Hello

  I have printer HP Deskjet 2050 J510 which gives me an error message "scanner communication cannot be established. I had visited the HP support portal & downloaded HP print & scan doctor. After you run this tool, it is said that it cannot solve the problem. It detects the first two steps of pilot (or can be) Manager & pilot agreed. But in the third stage it gets stuck to the top (win scanning can be, even after the restaring the computer). I use 32-bit windows.

  It seems that HP can't valer'evne fix bugs in its own products. It's pathetic.

  A real quick help will be appreciated...

  Hi alb7039,

  Follow the steps below to update the software to the latest version.

  First step: clear temp directory

  1. tap folder in the race or search programs and files of field

  2 Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).

  3. proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-79309-1&CC=US&DLC=en&LC=en&os=4063&Product=3635399&sw_lang=

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know what you find?

• Explorer.EXE error after the restoration of the ERD Commander

  Dell Inspiron B130

  Windows XP Service Pack 2

  Recently performed a HD format and new installation of XP SP2. After I installed all the drivers and others, I checked that the system was operating normally. After a few days of use, Windows Update downloaded Service Pack 3 and asked me to install. I started to install SP3, but at about 50%, the laptop battery is dead at Midway through the installation. I plugged the laptop on the power source and power. I restarted the laptop and XP started only a completely black screen and the white slider. No ALT + CTRL + DEL, desktop icons, etc.

  I rebooted the laptop of ERD Commander, ran the restore system and selected the first available Restore Point. Point of restoration chosen was recorded a few days before, and was the first recorded point after the clean installed XP. I rebooted the XP system. Wallpaper loaded with white cursor, but NO start menu or desktop icon. A message appears saying "Explorer.EXE Application error, press OK to exit the application" or something very similar. Did not write the error code, but can get if necessary. If I press the OK button (which is my only option), there is still no icons on the desktop or the start menu. Only the cursor. No access ALT + CTRL + DELETE or something like that.

  Thinking about completely wipe the system and reinstalls the operating system. Any suggestions before I jump in this solution?

  Explorer.EXE error after the Restore Point of ERD Commander. Dell Inspiron B130. Recently clean installed XP SP2 on laptop. Installation of SP3, to 50%, battery dies the laptop right in the middle of the installation of the SP3 update. Restarted, XP starts with black screen with cursor only. ERD restart order and restore XP to the last known good config (I choose point immediately after XP clean install). Reboot to XP. Now the wallpaper shows as well as the error message saying "Explorer.exe Application error, click OK to exit Explorer" dialog and then I can't access anything. Any ideas?

  Hello

  What is the full and exact error message?

  Step 1: Check if you are able to boot into safe mode without any problem. If you are able to boot into safe mode without any problems then try to perform the clean boot to safe mode. Also disconnect any external devices connected to the computer.

  Reference:
  To start the computer in safe mode
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Step 2: If you are still having the same problem, then you can the steps at the bottom of the article.
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

• HP Director launch even after the installation of the updated software. HP Officejet 5510.

  Problem launching HPdirector even after the installation of the updated driver.  Also not scan; message machine wants software installed.  Did not have this right?

  Any ideas?

  [Personal information]

  Hello drudgedread

  Follow the steps below and let me know what happens? These instructions will be clean your temporary folder (a folder that contains temporary data such as data configuration / installation) and rub the printer software with the most recent uninstall.bat utility for your printer.

  First step: clear temp directory
  Type %temp% term or search programs and files of field
  Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  Proceed to step 2 below
  Second step: downloaded and extracted to your system:
  1 download the drivers and full software features
  Complete features Officejet 5510 software
  2. once the download is complete, double-click the file to extract the software.
  3. when the installation window opens, press the Cancel button to stop the installation
  4. tap folder in the race or search programs and files of field
  5. Locate and open the folder starting with 7z (example: 7zS2356)
  6. right click on the folder and select copy
  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.
  8 open the 7z, that you just copied on your desktop
  9 open the Util folder
  10 open the CCC folder
  11 start the uninstall_L4
  12. once the uninstall is complete, restart the computer
  13. run disk cleanup from the tools Accessories\ system under all programs folder
  14. download and install the latest version of Adobe flash player
  Adobe Flash Player
  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print & scan? Also, if there are errors or messages just them down and let me know.

• I was forced to upgrade to Windows Live Messenger, but even after the update of XP and the office, I always an OnCatalogResult: error 0x0072ee6

  I was forced to upgrade to Windows Live Messenger, but even after the update of XP and the office, I always an OnCatalogResult: error 0x0072ee6

  Hi jcyho,

  Thanks for posting. I have a little trouble understanding your question. If possible you can post back with more detailed information, we can help you with this problem.

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• deployment of imagery-vs is on alert, even after the redeployment of imaging - vc.ear

  Hi all

  
  

  Having extended the domain to include the IPM and the University Complutense of MADRID, I found that the deployment of imagery-vs is in warning state. but I am facing the same problem even after the redeployment of the imagery-vc and I get under the same WebLogic console reason: -.

  ""MDB application Imaging -vc is NOT connected to e-mail System. ' "

  
  

  Help, please.

  
  

  Kind regards

  Vipul Verma
  

  Thanks Amey and Srinath for quick answers. Version of WCC is 11.1.1.8.0

  The problem is resolved after you set the IPM server as a target in the jms Viewer.

  Kind regards

  Vipul Verma

• I CAN QUERY A TABLE EVEN AFTER THE DELETION OF THE DATA FILE

  Hello

  Can someone explain to me the reason why I am able to interview some tables even after the deletion of the data that are associated with file?

  SQL > select table_name, tablespace_name from dba_tables where owner = 'SCOTT ';

  TABLE_NAME, TABLESPACE_NAME

  ------------------------------ ------------------------------

  TEST2 USERS

  TEST USERS

  SALGRADE USERS

  USERS OF BONUS

  USERS OF THE EMP

  USERS OF DEPT

  6 selected lines.

  SQL > exit

  Disconnected from the database to Oracle 11 g Enterprise Edition Release 11.2.0.1.0 - Production

  With partitioning, OLAP, Data Mining and Real Application Testing options

  [oracle@localhost orcl] $ rm /app/oracle/oradata/orcl/users01.dbf

  [oracle@localhost orcl] $ sqlplus scott/scott

  SQL * more: Production version 11.2.0.1.0 on Mon Mar 30 21:35:54 2015

  Copyright (c) 1982, 2009, Oracle.  All rights reserved.

  Connected to:

  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production

  With partitioning, OLAP, Data Mining and Real Application Testing options

  SQL > select count (*) from test2;

  Select count (*) from test2

  *

  ERROR on line 1:

  ORA-01116: error opening the database file 4

  ORA-01110: data file 4: ' / app/oracle/oradata/orcl/users01.dbf'

  ORA-27041: could not open the file

  Linux error: 2: no such file or directory

  Additional information: 3

  SQL > select count (*) of the test;

  COUNT (*)

  ----------

  5000

  SQL >

  The first output is as expected. But why am I still able to query the table of test, even if the data file has been deleted.

  Hello

  The process of database have a file handle for the data file - this remains even when the file is deleted (it disappears from the normal file system navigation)

  You can see if you have lsof installed

  just try

  lsof | grep datafile_name

  Once the database is restarted and the released file handle so you will not be able to do this any more - and in fact you will get errors when it can't find the file.

  See you soon,.

  Rich

• Even after the status report of the auditor approval i - the load is "pending approval of accounts payable"

  Even after the status report of the auditor approval i - the load is "pending approval of accounts payable"

  (1) what to do now? I intend to update it

  UPDATE ap_expense_report_headers_all

  SET expense_status_code = "INVOICED."

  expense_current_approver_id = NULL,

  source = 'Self-service '.

  (2) why these things happen? What is recommended to treat if it happens?

  Thank you

  Rahul

  Hello Rahul,

  Expense report preparer can remove the expense report and re - submit, it may be the case of data corruption which is the reason why its status is not updated.

  Re submitting the ER to do magic

• Error 16 after the restoration of Photoshop Time machine

  My HARD drive died. After the restoration of Photoshop CS6 and Photoshop Time CC14 Machine again SSD or opens. I get the error 16. I restored adobe all the library files and all permissions are correct.

  Migration of Mac with Time Machine WILL NOT WORK with the Adobe program activations due to hidden registration files

  Sign out of your account... Uninstall... to run vacuuming...

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -using the vacuuming after uninstalling and prior to the relocation is necessary

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  -Restart your computer... Sign in to your account... Reinstall

• How can I restore Adobe Acrobat Professional XI (bought earlier this year, in February; education version) after the restoration of Windows 7 to factory settings? I tried the download link provided by email I received when I just bought, but it didn't wor

  How can I restore Adobe Acrobat Professional XI (bought earlier this year, in February; education version) after the restoration of Windows 7 to factory settings? I tried the download link provided by email I received when I just bought but it did not work.

  Hello

  Use the following link to download:-

  https://helpx.Adobe.com/Acrobat/KB/Acrobat-downloads.html