Constant reboot

Similar Questions

• After trying to install the updates. my computer is now stuck in constant reboot mode while showing "Configuring updates 3 of 3 0%, do not turn off your computer.

  Visa update problem

  After trying to install the updates.  my computer is now stuck in constant reboot mode while showing "Configuring updates 3 of 3 0%, do not turn off your computer.  I tried to follow the instructions provided here because it seemed to be the same problem.  But when I restart and hold down the F8 key so I can boot into safe mode, I tried selecting safe mode and I get the same results, and I tried again by selecting the option 'Disable automatic reboot' which seems to be an option on the same page with the option of safe mode.  Whatever it is, the same message comes back and I can never get to where I can see my desktop to click 'start '.  I can't get out of this cycle.  I installed the update because it said I needed to install it.

  *************************************************************************************************************************************************

  Turn off your computer by holding the power button for about 20 seconds.
   
  Start your computer in safe mode: press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears
   
  Disable the automatic restart in the event of system failure:
   
  • Click Start
  • Click on Control Panel
  • Click on system and Maintenance link.
  • Click on the system link
  • In the left pane, click Advanced system settings
  • Locate the startup and recovery area, click the settings button.
  • In the startup and recovery window, uncheck the box next to automatically restart.
  • Click OK in the startup and recovery window
  • Click OK in the System Properties window
  • Close the system window
   
  After that... While STAYING in safe mode I do a system restore and maybe try a manual install of the update later.
   
  For the sake of space I refer you to the article about how to proceed.
   
  System restore
  http://windowshelp.Microsoft.com/Windows/en-us/help/9f6d755a-74bb-4A7D-A625-d762dd8e79e51033.mspx
   
  Windows updates: http://windowshelp.microsoft.com/Windows/en-US/Help/8f259118-0d61-4c7a-8c56-24987e87a8171033.mspx
   
  Please let us know if this solution works for you

  Theresa
  Microsoft Answers Support Engineer

  Hello

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• Windows 10 installed without permission, I reload Win 7, now I get constant reboot commands.

  * Original title: Constant reboot command

  MicroSoft, without my permission, loaded win 10, I followed the instructions to remove and reload Win 7, now I get constant reboot commands.

  Hello

  According to the description, I understand that you lowered the score of 10 windows and now face problems with your Windows 7 computer.

  I would like to know some information.

  1. You receive an error code or error message?

  2. This restart commands you talk too much?

  3. What is the current status of your computer you can start on the computer?

  First of all I suggest you to disconnect all external devices such as USB printers, USB Hubs, etc.

  I suggest try to start the computer in safe mode and check, please see Microsoft article and check out them below if it can help.

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  Alternatively, you can help Microsoft Article given below to perform the verification and startup repair.

  http://Windows.Microsoft.com/en-us/Windows/what-are-system-recovery-options#what-are-system-recovery-options=Windows-7

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• constant reboot error

  Nobody knows how to solve this constant system restart?

  Anonymous UUID: 5EAFE90C-13B1-9D51-1130-4A1DA3D6CA79

  Sunday, may 8, 11:51:59-2016

  Panic report *.

  panic (cpu 0 0xffffff7f84efd50e appellant): "MCO GPU REGISTRY RESTORE FAILED: rdar://7254528, VendorID invalid"@/Library/Caches/com.apple.xbs/Sources/AppleGraphicsControl/AppleGraphi csControl-3.12.6/src/AppleMuxControl/kext/AGCPowerManagement.cpp:1158.

  Backtrace (CPU 0), frame: return address

  0xffffff91efa5bdb0: 0xffffff80022dab12

  0xffffff91efa5be30: 0xffffff7f84efd50e

  0xffffff91efa5be70: 0xffffff7f84f00324

  0xffffff91efa5bea0: 0xffffff80028b92e3

  0xffffff91efa5bf00: 0xffffff800230f1ea

  0xffffff91efa5bfb0: 0xffffff80023c8e27

  Extensions of core in backtrace:

  com.apple.driver.AppleMuxControl (3.12.6) [44D361A1-4938-3AA5-9F73-9C909B66214B] @ 0xffffff7f84ef2000-> 0xffffff7f84f05fff

  dependency: com.apple.driver.AppleGraphicsControl (3.12.6) [1654475C-9A4B-386C-AFA8-0A530194A 2F9]@0xffffff7f84edf000

  dependency: com.apple.iokit.IOACPIFamily (1.4) [5D7574C3-8E90-3873-BAEB-D979FC215A7D] @0xfffff f7f82db3000

  dependency: com.apple.iokit.IOPCIFamily (2.9) [4FE41F9B-2849-322A-BBF8-A94816C003D6] @ 7f82b2c000 0xffffff

  dependency: com.apple.iokit.IOGraphicsFamily (2.4.1) [172C2960-EDF5-382D-80A5-C13E97D74880] @0 xffffff7f8371d000

  dependency: com.apple.driver.AppleBacklightExpert (1.1.0) [C49819CE - 729A - 36B 2 - 9AC1 - 744A43DC23 6F]@0xffffff7f84eed000

  Corresponding to the current thread BSD process name: kernel_task

  Mac OS version:

  15E65

  Kernel version:

  15.4.0 Darwin kernel version: Fri Feb 26 22:08:05 PST 2016; root:XNU-3248.40.184~3/RELEASE_X86_64

  Kernel UUID: 4E7B4496-0B81-34E9-97AF-F316103B0839

  Slide kernel: 0 x 0000000002000000

  Text of core base: 0xffffff8002200000

  Text __HIB base: 0xffffff8002100000

  Name of system model: MacBookPro8, 2 (Mac-94245A3940C91C80)

  Availability of the system in nanoseconds: 1954559897283

  last load kext to 1954161354768: com.apple.driver.AppleThunderboltDPOutAdapter 4.1.3 (addr 0xffffff7f85e68000 size 53248)

  Finally unloaded kext to 384735258486: com.apple.driver.usb.AppleUSBUHCI 1.0.1 (addr 0xffffff7f833c7000 size 126976)

  kexts responsible:

  com.apple.driver.AppleBluetoothMultitouch 90.3

  com.apple.driver.AudioAUUC 1.70

  com.apple.driver.AppleHWSensor 1.9.5d0

  com.apple.driver.AGPM 110.21.18

  com Apple.filesystems.autofs 3.0

  com.apple.driver.AppleOSXWatchdog 1

  com.apple.driver.AppleMikeyHIDDriver 124

  com.apple.driver.AppleMikeyDriver 274.7

  com.apple.driver.AppleUpstreamUserClient 3.6.1

  com Apple.Driver.pmtelemetry 1

  com.apple.iokit.IOUserEthernet 1.0.1

  com.apple.driver.AppleHDA 274.7

  com.apple.kext.AMDFramebuffer 1.4.2

  com.apple.iokit.IOBluetoothSerialManager 4.4.4f4

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.AMDRadeonX3000 1.4.2

  com.apple.driver.AppleIntelHD3000Graphics 10.0.0

  com.apple.driver.AppleHV 1

  com.apple.driver.AppleThunderboltIP 3.0.8

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.4f4

  com.apple.driver.AppleSMCPDRC 1.0.0

  com.apple.driver.AppleLPC 3.1

  com.apple.kext.AMD6000Controller 1.4.2

  com.apple.driver.AppleMCCSControl 1.2.13

  com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

  com.apple.driver.AppleSMCLMU 208

  com.apple.driver.AppleMuxControl 3.12.6

  com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

  com.apple.driver.AppleIntelSNBGraphicsFB 10.0.0

  com.apple.driver.SMCMotionSensor 3.0.4d1

  com.apple.driver.AppleUSBTCButtons 245,4

  com.apple.driver.AppleUSBTCKeyboard 245,4

  com.apple.driver.AppleIRController 327,5

  com.apple.iokit.SCSITaskUserClient 3.7.7

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

  com.apple.BootCache 38

  2.8.5 com.apple.iokit.IOAHCIBlockStorage

  com.apple.driver.AirPort.Brcm4331 800.20.24

  com.apple.iokit.AppleBCM5701Ethernet 10.2.0

  com.apple.driver.AppleSDXC 1.7.0

  com.apple.driver.AppleFWOHCI 5.5.2

  com.apple.driver.AppleAHCIPort 3.1.8

  com.apple.driver.usb.AppleUSBEHCIPCI 1.0.1

  com.apple.driver.AppleSmartBatteryManager 161.0.0

  com.apple.driver.AppleACPIButtons 4.0

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleACPIEC 4.0

  com.apple.driver.AppleAPIC 1.7

  com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0

  com Apple.NKE.applicationfirewall 163

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com.apple.driver.AppleIntelCPUPowerManagement 218.0.0

  com.apple.driver.AppleThunderboltDPOutAdapter 4.1.3

  com.apple.driver.AppleThunderboltPCIUpAdapter 2.0.2

  com.apple.driver.AppleMultitouchDriver 304.10.2

  com.apple.driver.AppleHIDTransport 5

  com.apple.driver.AppleBluetoothHIDKeyboard 181

  com.apple.driver.IOBluetoothHIDDriver 4.4.4f4

  com.apple.driver.AppleHIDKeyboard 181

  com Apple.kext.Triggers 1.0

  com.apple.driver.DspFuncLib 274.7

  com.apple.kext.OSvKernDSPLib 525

  com.apple.iokit.IOSurface 108.2.1

  com.apple.iokit.IOSerialFamily 11

  com.apple.iokit.IOAcceleratorFamily2 205.3

  com.apple.driver.CoreCaptureResponder 1

  com.apple.iokit.IOFireWireIP 2.2.6

  com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.4f4

  com.apple.iokit.IOBluetoothFamily 4.4.4f4

  com.apple.driver.AppleHDAController 274.7

  com.apple.iokit.IOHDAFamily 274.7

  com.apple.iokit.IOAudioFamily 204.3

  You would seem to have a bad control graphics card

  Please take a genius appointment at an Apple Store, or select another authorized service provider.

• HP Pavilion x 2 Tablet 210: hard reset on my laptop, error and now my phone is in a constant reboot State.

  My laptop is running slow so I thought I would do a hard reset because I had not all the important files on this subject. So I reset it and I got a blue screen error, then a screen of the list with a popup box saying there was an error or my computer restarted and I have to press OK to install. I found an online solution to go beyond the popup box, I don't remember what it was, but now my laptop is stuck in a State of constant restarting. It goes like this:
  Blue HP logo with loading circle
  Black screen,
  Blue HP logo,
  Installing and configuring Windows install screen that didn't move out of 64%.
  And then black screen. This process is repeated constantly.
  Help, please.

  Hello @kirsty_mcq17,

  Welcome to the HP support community! I understand that your PC Pavilion x 2 is stuck in an endless loop, after trying to reset it.

  You can start by trying a full reset on the system and testing of hardware failures.

  If the system is still stuck in the loop, you may be able to follow the steps to perform a recovery when 10 Windows does not successfully start.

  If you do not have a separate for Windows 10 drive, you can create a Microsoft recovery media and attempt to restore the system or start from that instead of the hard drive.

  Please get back to me how that happens. Please click on the Thumbs up below to thank me for my efforts!

  Thank you!

• constant reboot to update iOS 9.2.1 now won't restart

  Following the update of ios this morning - I guess it was the 9.2.1 above, the phone began to continually restart.

  After a few hours of this restart, I looked at communities. I have first tried required top off down the button for 10 seconds. This does not.

  Then I tried now on and the button home for 10 seconds. This has prevented constant restarting. However now the phone will not turn on. When you press on and little second hold the start stop to start the phone the apple symbol comes on but after say 10 seconds it goes off and then nothing. Tried a few times.

  Current status is phone seems to be totally turned off.

  PS phone was connected to the power during the update process.

  Any ideas anyone? Thank you.

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

  More info here:

  https://support.Apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• HP Desktop in constant reboot without connection monitor

  I have a recently purchased office of p2-1317 c model HP with Windows 8 and Office 2010.  I don't know if this is a related cause of my question or not, but that's my story.  The other day I was software activation for a connection device of Netzero high speed.  In the middle of downloading the software, I received an error message on a pilot, but don't remember exactly what the message says.  The installation seems to be okay, then says to reboot.  When I did I have more communication works for my monitor.  The Office seems to turn on okay (hear the fan, the light goes on).  Opening of standard desktop image appears on the screen, but in the lower left corner, there is a small icon that looks like a computer screen with a red circle with an x in it. My keyboard and mouse do not seem to connect with my computer more either.  I'm NOT tech savvy, but I tried everything what is obvious: checked the connections - removing all and install plug it back into the original.  I did CTRL + ALT + DELETE and can't open the Task Manager. On or off the unit.  Held in the Start button to try to force a reboot.  I can control the settings of the monitor by pressing the buttons on the bottom of the screen, but that doesn't seem to put anything or even move any communication.  I plugged my old monitor to the new Office Tower and get the same image with icon and no possibility to communicate to the computer.  It seems that the download is something that will help my computer communicate with a monitor.  I also noticed that when I arrived the night last House that has the power of the tower was on.  I turned it off, then this morning noticed on again - it seems to start itself!  Help!  This is a brand new computer, we barely had a chance to use!  I called HP support and unfortunately is NOT well...  If you can offer a suggestion in the non-tech language I will offer prayers to the top in your name for life!  Windows 8 was preinstalled on the computer, so I do not have a disk to reinstall.  I have discs for Office 2010.  I have no recovery discs - and when you go to the HP site to download a copy, it's too complicated, because there are all kinds of warning messages that scare me on 'make sure you download the correct copy.  I put in my model number and come from several choices, so which one to choose?  Sigh... anyone, anyone, Buehler...

  Hello mopeyone,

  Some devices do not work correctly after installing some programs.

  Turn off the computer.

  As you power back on press the ESC key.

  This will load a boot menu.

  Press F11 for recovery.

  Select a language.

  Select push hard.

  Select Refresh.

  This uninstall and reinstall windows.

  Here is a link that will explain you the update.

  I would like to know how everything goes.

• V 32 b - cell Hp Constant reboot Windows will not open windows / can I buy w7 or 8 and be ok

  I turned on my Hp laptop after a safety closing, and I get a blue screen that flashes if quickly, you can not read. Then brings up the screen safe mode reboot. Try to start one of these options just brings me back to restart it even safe mode. (Does restart any mode). I tried f8 and I donot have the repair option. In the start-up/safe screen, it says use my drive to repair, but laptop was bought with windows already not downloaded so no disc. If I know that all previous updates have been run to buy windows 7 32B and just upgrade? Or will I have the same problem?

  Discussions were merged.

  Deleted duplicate.

  Unplug all devices - printer, mike, etc...

  Have you tried going back to the last good Configuration to know when the screen appeared?

  Changed the mode of the boot drive SATA?

  http://support.Microsoft.com/kb/922976

  Can you remove the hard drive and move it to another computer running Windows Vista?  If so, you can then run CHKDSK or create a dual-boot configuration.

  https://techingiteasy.WordPress.com/2012/03/05/How-to-dual-boot-Windows-Vista7-and-Windows-8/

  Step by step guide on the parallel Installation

  http://vistaultimate.WindowsReinstall.com/parallelinstall/index.htm

  (1) precaution to determine it is not a Boot Virus.

  Follow the steps in this article - use Windows Defender in offline mode

  How to remove a boot sector Virus

  http://www.WikiHow.com/remove-a-boot-sector-virus

  Have you looked on the HP site for downloads driver your computer check if the recovery discs are available?  You can order then re-partition and reformat your hard disk and reinstall Windows Vista.

• Windows machine is in a constant reboot loop. HP has been working on the device and there is no hardware problem. Microsoft support said there are corrupted in windows files and we were able to repair windows.

  HP is sending me a CD to reboot for Vista and say these original files are on my hard drive. The risk is of losing all the data. I'm embarrassed to say I didn't have a backup or set a restore point in the years I've had the machine
  So my concern is to lose all e-mails, documents, images, videos, and music, a lot of itunes. Microsoft feels that they can get the computer restarted without damage and data. Apple suggested I install a product open source, Ubuntu and use the file manager in this OS to unload the files. I studied a little and it seems too risky.  My question is this; What is the best way to save my files as part of the reboot process?

  You follow what I said.
  We don't know what data is on which drive.

  1 and 2 requires that remove you your hard drive.
  1 means install you also in another computer as a slave drive.

  If you think that labor is out of your reach, see a local computer repair shop.

  See you soon. Mick Murphy - Microsoft partner

• Windows 7 x 64 SP1 on install GPT drive ends at the start of services (constant reboot sequence)

  Details: Asus P8Z68-V Pro motherboard with bios UEFI 8 G of Ram, I7 - 2600K processor

  I started from the install disc Select EFI boot from the boot settings, players like AHCI.

  I had 2 options in my settings to boot to the CDROM, EFI - HL... (mfr - dvd). or just HL-(mfr - dvd)

  selected installation, you press SHIFT + f10 to go to command windows by using diskpart, I set up the drive as being of TPG and then restarted the pc again

  using start EFI to the DVD. The installation went according to normal, creating 3 EFI/MSR/MBR partitions and install it as usual until it rebooted twice and went to start the services... Then he told me that he could not continue and that the machine could continue the installation after a reboot. reboot booted from hd, got to the same point again and again, he has failed and restarted the installer would continue with the new message...

  In my bios boot options, I have a new entry Microsoft boot manager. Any help would be appreciated

  Hello davidwj

  Thanks for visiting the site of the community of Microsoft Windows 7.

  The question you have posted is related to installing Windows in an EFI environment and would be better suited to the TechNet Discussion groups. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en/w7itproinstall/threads

  Install Windows on a computer EFI

• Constant rebooting with blue screen - Satellite A60 332

  I have a Satellite A60-332 for topic a little more than two years now, recently, I noticed two major problems which I did not have time to run to the top:

  1. sometimes the laptop restarts just by itself for no reason. When I'm working, a blue screen with white text pops up for half a second and restart the system. Rarely another question occurs after that it will not restart but will be beep like crazy.

  2. I've had this problem since I bought my laptop; Sometimes the laptop won't play audio. What happens is after turning on the system; If the audio does not work: all the 'switches' in the volume control window will be present (wave, cd player, to the, telephone line, etc.). But sometimes when the audio does not work it just shows three switches, not more.

  I've had these two problems for a while now, and I've reformatted my computer at least 5 times since I bought it, these problems never go away.

  I also had another question; my hard drive is the 30 GB supplied with Toshiba. I tried to upgrade, but heard that most laptops, including Toshiba, have a hidden partition on the hard disk called a tatoo, that is when some of the system files are stored so that when you run the recovery discs, they function properly. Can anyone confirm this because, of course, is not a pull & pop work to install a new hard drive, because I won't be able to copy this tatoo.

  Many thanks for any help in advance.

  Hello

  1.) BSOD appears mainly due to the failure of the serious software or hardware failure. The laptop could also automatically stopped due to overheating. In this case, you should check your fans and clean if possible with the vacuum cleaner. But be careful. If it won't work not then test the operating system with the new installation of the OS. Perhaps a 3rd party software is a bad influence.
  In addition, check if the device uses the latest version of the BIOS. If this is not the case, the update.

  2.) don t know why this happens but maybe due to overheating mentioned.
  However, you could try reinstalling the audio driver.

  3.) sometimes laptops come with the Qosmio player or express media player. These players are installed on the hidden partition. I don t think that there could be another reason for hidden partitions.

• Constant rebooting with new hard drive

  I have an iMac of 2008 with a processor clocked at 2.66 GHz that the hard drive had died in. Bought a Samsung EVO 850 SSD and 4 GB Crucial 800 MHz ram. Replaced both, installed Snow Leopard on a CD, upgraded to El Capitian, and everything was fine. Then he began to have a kernel panic. I restored it back, and it is again stable. Through error logs, it seems that the drivers are not signed. So I put a different hard drive, a 7200 RPM Seagate. Same question. Tried to copy the hard drive of my MacBook on the Samsung. Did not work. Any ideas?

  Thank you!

  After a recent newspaper panic please. Mac OS X: how to connect to a kernel - Support Apple panic

• Windows 8 Setup(on USB Drive, but I didn't actually install it just tested out to check if valid) causing constant reboot can't even get to the start screen where I have connection on my Chromebook (AcerC720)

  Also if you're wondering why I'm posting on this forum about microsoft, it's because you guys would probably well informed of the problem.

  You can start by unplugging all non-essential devices you may have connected to the computer.

  If the problem persists.

  Start the computer before Windows starts to load, press F8 repeatedly until the recovery environment is responsible.

  Click on repair computer

  This will load the advanced Recovery Options

  Click on solve problems

  Click on startup repair

  Follow the instructions on the screen.

  See if it solves the problem.

• Problems with the outgoing calls and constant reboot

  I got my Droid on 12/23. It's a company phone, so I hesitate to consider the Verizon store.  It worked great until the 12/29 and then he stopped outgoing calls and began planting time in time, and then more often otherwise, now it hangs every two or three minutes.  It became useless as both a phone and for the most part.  I took the card SD and that did not help.  It always restarts on its own.  So I replaced the card.  I liked the phone for a week that it worked.  I really want to go back to a Blackberry, I'm sure that my company HIM people will probably try to convince me to do. Thanks in advance for any help you can give.

  I hope that helped! It's nice to have something to be such an easy solution!

• Apple will replace my irreparable out of warranty iphone 5?

  I have an iPhone 5 that I bought in a store here in Ireland. There is no official apple store in Ireland, but I can bring a premium dealer. I had a problem with my iPhone a few months where the phone went into a constant reboot cycle. It was repaired at a local phone repair shop. Recently, I'm having a problem where I can not even the phone past the apple logo. I brought the same repair shop, but this time, they said it is more serious and maybe he isn't able to fix at all. I was wondering if I brought the phone to one of these premium dealers, would they be able to repair/Exchange my phone for free? Thank you

  Sorry, but if a no Apple authorized repair service the iPhone, all service options provided by Apple, including out-of-warranty replacement, will have disappeared.

  Only Apple or Apple authorized service providers must repair the phone.