Constantly identified LAN connection, does not connect to the network or internet

Similar Questions

• Computer laptop XP does not appear in the network of Vista laptop

  My cell phone based on Windows-XP does not appear in my laptop Windows Vista-base and is not accessible from this Vista computer, but it appears in the network adapter connected to the network wireless by a double dashed line. At the same time, the laptop Vista appears in computers on the XP network and is accessible from there. I have already applied Windows XP - SP3 hotfix KB 922120 to XP laptop and checked the firewall on both machines (Exceptions) settings, and they seemed OK. Also, I checked the HKML restrictanonymous DWORD value data value data (0) of the XP machine.

  Can someone help me with this? Thank you so much in advance.

  Hello
  Maybe this can help.

  To get best results connect to each computer system screen and set all the computers to be on a bearing the same name of Working Group , while each computer has its ownunique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

  In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.

  Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.

  -----------

  If more control is needed to take a look at this page http://windows.microsoft.com/en-US/windows-vista/Share-files-and-folders-over-the-network-from-Windows-Vista-Inside-Out

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Installed at El Capitan and now HP printer does not work via the network

  Installed at El Capitan and now HP printer does not work via wireless network

  Open system preferences > printers and Scanners and select the print tab.

  Then the right or control click on the HP printer on the left then click: reset the printing system

• Linksys WPC55AG, WPC54GX on wireless LAN, "connected to the AP, but Internet is not found.

  Aloha, finally a forum thar actually solves the questions, mahalo.

  These two wireless network adapters used to work properly with my DSL modem Westell 7500. Now, not so much.

  I can wire Enet cards pcmcia network very well. I see my Brother MFC885CW wireless printer.

  I'm on a gateway 9100, Win2k, Service Pack 4 running.

  Linksys utilities show that I received, but do not send bits.

  ipconfig gives 0.0.0.0 for the IP address auto configuration

  I looked at the parameters of the DSL router, I don't see anything strange of course.

  I also use wireless MAcBook Pro, airport, very good works. Hmm

  Any thoughts?

  The WPC54GX allowed ascii/text in box 1 WEP key, the WPC55AG has failed, only hex characters. However, after a search fast on another computer, I found an alpha decoder spell and managed to enter the WEP key in hexadecimal form, which I was able to confirm the MAc RPN calculator. Network cards do not seem to do the conversion correctly. I knew this because of my string of characters in the password.

  Also, the dual-band has been assigned, when he did at all, a "unrelational", (best way to put it) the IP address of 169.254.81.145, instead of a 192.168... as I was expecting.

  So with a little effort, both network adapters are now connected to the internet, and ipconfig shows well, as valid information.

  Some once said that I spoke in hex, there you have it.

  Thank you very much, I would say that the problem is solved.

  Aloha

• Workgroup computers connected but does not appear in the network folder

  I got number of connected computers on my working group, but for the moment, only 3 of 8 computers appear in my record of working group in my network.

  When I search the names of each computer on the 'Search' from the menu 'Start', they appear and seem to be connected as I am able to access the shared folders.

  The name of the computer, I searched (let's call it 'Computer 1') appears on the left menu under 'Network' with 3 computers that are obviously connected but when I click on network and go into the network, computer folder 1 is still not visible and only 3 computers are indicated.

  How can I solve this problem?

  Thanks in advance

  Hey Kass,

  These computers are on a domain network?

  I suggest to follow the steps described in the article and check if it helps.
  Why can I not see other computers on my network?

  http://Windows.Microsoft.com/en-CA/Windows7/why-can-t-i-see-other-computers-on-my-network

  
   

  Why computers are missing from the network card?
  http://Windows.Microsoft.com/en-CA/Windows7/why-are-computers-missing-from-the-network-map

  Let us know if it helps. If the problem persists, we would be happy to help you further.

• Laptop Compaq CQ58: LAN Ethernet does not work after the upgrade to windows 8.1

  After the upgrade of Windows 8 to 8.1, my Ethernet LAN is no longer in effect. Wireless LAN connectivity is OK. I run the HP Support Assistant and downloaded the drivers for 8.1. Hovever, I don't see a listed 8.1 for the LAN Ethernet driver.

  It seems that you encounter the same problem, I did when I ran the free preview of the W10. I had this error on the card reader.  I have no idea how to solve this problem.

  Is there is no ethernet controller needing drivers in Device Manager, then it is probably the realtek lan adapter that has the number 12 of the code, or it is part of the motherboard that controls the ethernet adapter.

  If you need Atheros bluetooth driver, then this is probably the one you need.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_127984_1

  Unfortunately, I won't be able to help you with question 12 code or ethernet.

  IMO, they are insoluble.

• HP Photosmart 6510 series connects to the network and Internet, but not the computer.

  Hey all,.

  I have a desktop H8-1228 and 6510 e - printer.  I got both products at the same time.  I did the initial installation, and everything worked perfectly.  I was able to print of my HP Touchpad (the printer was on the floor and my Touchpad was down.).  Recently, I made a trip for two weeks.  I turned off the printer.  This seems to have been a mistake.  Now, he will only contact my network and Internet, but not the computer.  The Setup program keeps telling me that it is 'Impossible to find the printer' and that he wants me to check the IP address of the printer.  I did this many times by printing the HP's Configuration Page from the printer screen.  I also used Windows "Add a printer" without success.

  I have installed and uninstalled the software several times; every time that remove the icon of the printer and the Standard TCP/IP port in the "Devices and printers" section in Control Panel.  A few minutes earlier, I used Regedit to delete any reference to the series of HP Photosmart 6510 in the registry, believing that it could help my situation.  There can be no. :-(  I did the installation with the same problems that I had all the other times that I tried to install it.

  No help from you the printer experts will be greatly appreciated.  I'm not a novice as you can see.  This situation, however, launched my posterior. :-))

  Hi old_geekster,

  You may want to enable disable all startup programs in msconfig until you are able to access the Web integrated printer server. It seems that there is something in the communication with the printer's operating system blocking. It will most likely software firewall or security related.

  HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.

  I would like to know what are the errors you receive?

  http://www.HP.com/go/tools

• OfficeJet 4630 does not print on the network

  My printer print is no longer on a network connection, a USB connection. For example, when I try printer in MS Word, the menu of the printer displays "Unable connect", even though I'm perfectly connected to my printer. I've had this printer for about two months, and it has been the case for at least a month. I ran "HP print and scan doctor, and he tells me that there is a driver conflict, but whenever I reinstalled the driver and all software, he repeats the same error message. I also run the program of "troubleshooting HP Installation failure - network", but to no avail. My PC is connected to my router via an ethernet cable, and my printer is connected to my router via a wireless connection, note that I've never had this problem until recently. All reports that I printed state that there is no problem with the connection or the printer, the signal is excellent. I rebooted my router, I reinstalled, I restored default on my printer.

  Hello Adam_C,

  Welcome to the HP Forums! I understand your concerns with your Officejet 4630. I noticed that you have made some necessary troubleshooting steps, and you tried to plug a USB cord to test the connection.

  What is your operating system on your computer? Click here to read: Windows.

  Please follow these steps:

  First of all, to follow this entire document from HP on "Can't find printer" Error Message appears on the computer for a wireless network Installation. This does not include the software to uninstall/reinstall.

  If you get the same error after following all the steps in this document, please let me know.

  Also, I would like to add a port on your computer to a wireless network:

  (1) go to devices and printers on your computer
  (2) right click on your printer
  (3) select printer properties
  (4) select the ports tab at the top
  5) click on add port, select Standard TCP/IP port, and then select new port
  (6) type your IP address of your printer, click Next, and then finish
  (7) click on apply, then OK
  (8) try to print a document

  Impatience on your part.

• How can I include my Apple TV in a homegroup. It does not appear on the network, but it works?

  I am using Windows 7 on my XP8000.  I installed Apple TV several months ago.  I wired it to my router.  Everything seems to work fine except when I display the network, Apple TV does not appear.  When I try to SECECT work of the Apple TV, nothing coming except the XP8000.  I can't do anything else.  I thought maybe I should do the part of the Apple TV from the residential group, but can't seem to do it.  Any help would be appreciated of course.  Thank you.  I have AppleCare for Apple TV, but have not used.

  You would not 'see' the Apple TV in the window of Windows 7 network. The Apple TV
  using proprietary protocols. With regard to the content of the navigation using the Apple TV to go
  the computer http://www.apple.com/support/appletv/getstarted/ should help. If
  you have questions, you should post in the apple forums.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• InDesign does not open when the network drive is not available.

  Hello world

  I have a laptop (MacBook Pro OSX10.9.5), which shares a network drive in my office. The reader is with another computer. When I take the laptop out of the network of the company (for a meeting or a house), InDesign will not open, it gives me the following error (see image). I tried to replace the default values and SavedData files and InDesign also re-install from scratch. I still get the same error. No idea what is happening or how to fix it? Thank you in advance.

  

  --

  Rafa.

  Hello!

  I realized that it was, finally. After playing, I noticed that my InDesign fonts folder, had 'alias' links to fonts residing on this shared drive. As soon as I deleted all those who where alias, the error disappeared. I hope this helps someone in the future.

  --

  Rafa.

• Out of browser-based Airhelp does not open in the network location

  Hello

  I was wondering if anyone can help with the following problem:

  I want to activate the internal evaluators open my help based on a browser of AIR in a shared network location. Currently, in order to open help, examiners must proceed as follows (which seems quite complicated):

  1. create a folder on their local systems: \Macromedia\Flash Player\ #Security\FlashPlayerTrust.

  2. stick the folder in the file RoboHelp.cfg (containing the network path to my index.html AIR help file).

  I derived the steps above to the procedure provided for by http://help.Adobe.com/en_US/RoboHelp/RoboHTML/WS1b49059a33f77726-484da80912ce87f5f33-8000. html

  Is there a way to avoid having to do the examiners perform these steps in order to access using AIR on a shared internal network location?

  Looks like a very involved process to just check that others in the company can open and test it. Is they do not do this and they click on the index file, it seems that the help opens, but then hangs on a blue and gray box with a progress bar that never moves.

  Thank you!

  Hello again

  erinforum wrote:

  Hi Rick,

  Thanks for the reply. We use Tech Comm Suite 3 (Robohelp 9). We could continue on the road to examine the content of the PDF, but we need our QA reviewers the opportunity to test the output of Airhelp browser based in different types of browsers. That's why we want to display the files somewhere and give them the opportunity to open them in different browsers.

  Thank you

  In this case I might suggest that you find a way to deploy to a web server via a URL that is not published. Just provide the URL to your testers.

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7, 8 or 9 in the day! Adobe Certified RoboHelp HTML Training SorcerStone blog RoboHelp EBooks

• Firefox is constantly stopping, aging, and does not when on the home page yahoo uk, Manager of the tasks is that means to stop it, no event will block

  Latest version of Firefox, keep up to date. 8.1 Windows running on del optiplex 620, 2 GB of ram, 80 GB disk partitioned with Win10 on the other. Panda free av and malwarebytes free running. Never had any problem with Win 8.1 up to now, I have returned to it because of many problems with Win 10. Did you check Event Viewer, nothing, checked for crash report, nothing. No malware not reported. Whenever the only solution is to stop Fox with the Manager of the tasks and then restart when Fox goes back to where she was.

  https://UK.Yahoo.com/ I noticed no problem in the last two sessions, perhaps the problem is resolved, will not display rear reccurrence as appropriate.

• acrobatprodc installer does not much with the network and cpu disk and 0 byte 0%

  I am usin win10 pro 64-bit and I noticed that Manager tasks shows the installer as being 32-bit, even if no error or complaints have been question by the installer to start. It's truly something or should I kill and look elsewhere for my needs

  Only a few programs are 64-bit - -system requirements | Adobe Creative Cloud scroll down and check each program

  In regards to Cloud Setup does nothing, a few ideas below

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -Run "Difficulty Host File" option https://helpx.adobe.com/creative-cloud/kb/cc-cleaner-tool-installation-problems.html

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

  or

  A chat session where an agent can remotely look inside your computer can help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Cloud creative support chat (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• A network computer does not appear on the network or in the "workgroup computers.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  See my reply to your post later. No need to post twice.
  MS - MVP - Elephant Boy computers - don't panic!

• Google Chrome could not connect to the network during installation...

  Currently I use maybe obsolete google chrome... But when I download the newest chrome and during installation... it could not connect to the network or internet connection so prevented me to install the new chrome... What's the problem? and how do it fix it? Thank you

  Try to download the full installer:

  Chrome for work: Chrome for work - Google