construction of a simple blinking light

Similar Questions

• AirPort Express has blinking light yellow - why? What should do?

  AirPort Express has blinking light yellow - why? What should do?

  There are many possible causes. Click here and follow the instructions.

  (143275)

• HP Deskjet 9800: blinking lights on hp 9800

  Help, help.

  I have HP 9800. Can not print anything because all lights are flashing constanlly. reset the printer according to the instructions and the problem continues. I would appreciate any input.

  Download the manual here.

  www.hp.com/ctg/Manual/c00458223.pdf

  Page 126 explains blinking lights to solve problems.

• E2000 brick? Blinking light question

  My E2000 worked without a single problem until I moved. Then I went to plug set up again once and his exploded. I tried a 30/30/30 reset, but it does not work, sometimes the power light stays on with a contraction of flicker or it will blink just quickly. I tried the ftp solution to put the firmware on it, but the program cannot communicate with the wireless router. When I try to ping, it will return either a "request timed out" or "destination host unreachable". What is there to do? Thank you for your time.

  It ends up being a bad diet. The router is perfectly fine.

  (Note to mod: edited in case of failure to comply with the guidelines forum.)

• After several years of functioning, my Time Capsule shows a yellow flashing light instead of solid green light.  He always seems to be working, but watch the blinking light.  An update is necessary?

  Time Capsule.   After six years of good operation, my Time Capsule shows a yellow light flashing instead of green light solid.  It seems to work fine, and I tried l ' switch off and restart, nothing helps.  An update is necessary?

  The Capsule of time... and other Apple routers... flashing orange when they have a message for you. To see what it is...

  Open AirPort Utility on your Mac... (Finder > Applications > utilities > AirPort Utility)

  Click on the image of the Time Capsuleand a small window will appear

  If you see an Update button, then new firmware is available for the Capsule of time if you want to install this package. To do this, click on the Update button

  Otherwise, find the Status parameter and then click on the little orange dot it for more information on why the status light flashes, with a suggestion to fix whatever may be the cause

• blinking light on my PC whenever I press the buttons on the tv comcast remote

  Recently, a light flashes on my PC whenever I press the comcast tv remote, that the light is on the frame of the right computer above the wording 'HP Touchsmart 310 PC'... just, this started to happen when I got a new remote from comcast to replace my old TV remote that doesn't work..... which would cause the light on the PC to Flash?   This is a serious problem... Comcast can help me... I'd appreciate any help that anyone can give... Thank you [edited personally identifiable information]

  As long as nothing is really happening with the PC, it is not a real problem.

  The Comcast remote uses IR to communicate with the TV box and cable.  Your wireless mouse uses the 2.4 GHz band and the usb dongle plugged into your PC.

  You might see misleading the Comcast remote radio frequency transmission, but I really don't see this as being something to fear.

• OfficeJet pro 6830e: continuous scanner blinking light under the guise of officejet pro 6830e

  Officejet pro 6830e scanner blinks permanently. I see so many comments but it is final the hp response expert who says it's a defect?

  Technical support thanks.i told it's normal. It is in a ready"" State. My daughter has the same exact and it also flashes. I could try to reboot it just for the heck of it. Appreciate the effort...

• Panel blinking lights OfficeJet 8500 has

  My OfficeJet 8500 Panel has all lights flashing and a message saying please turn printer and then turn it on again.

  When I do this, he comes back to the top, displays a brief message saying Code 0060 and then comes back to the message above.  Same thing happens after leaving that he unplugged for several hours.  Suspect I need to reinstall the firmware, but cannot find a way to do it when the Panel lights are flashing...  Thanks for any help

  Yes, with electronic, sometimes it's cheaper and better buy new rather than repair it. Sorry, we couldn't get your current operational computer.

  Good luck with what road you take!

• Photosmart C7280 blinking lights on the control panel

  
  

  The errors that you have found the point to a fatal mistake in the firmware of the printer. The only thing you can do is to reset the printer whenever the lights begin to Flash. Normally this would be fixed with a firmware update, but there is no updated firmware for this printer. I will include the instructions for a couple of different resets to use to clear the fatal error message when it arrives. The first is a hard reset, and it's about what you've done. The second is a partial reset and clears the settings a little further than does the hard reset. It should only be used if the hard reset does not clear the error as the partial reset erases all user settings and delete the setting wireless in the printer. I'm sorry, but there is not much else you can do.

  To do a hard reset:
  1. make sure that the printer is turned on.
  2. pull on the power cord from the printer.
  3. pull out the power cord from the wall.
  4. wait for 30 seconds.
  5. plug in the printer and turn it on.

  To make a partial reset:
  1. make sure that the printer is turned on.
  2. pull on the power cord from the printer.
  3. pull out the power cord from the wall.
  4. wait for 30 seconds.
  5. plug the power cord into the wall, but do not connect the printer.
  6. press 3 and # buttons.
  7. while now buttons, plug in the printer.
  8. when the lights come on, release the buttons.

• finished - c410b all-in-one white display blinking lights

  Hello

  I have this printer for about two years now.

  Yesterday, when I turned it on, there was a problem.

  He started going through his starting routine with the HP logo displayed, I attached peripheral tone from the pc.

  However, there was no verification mechanism

  displayed a code "C2FE0160".

  the display went blank, and the attention, wireless, print photos, auto response and power lights flashing it.

  I tried unplugging all the cables, and leaving unplugged for a while, etc, etc, etc.

  Nothing seems to make any difference.

  Can anyone help

  Thank you

  concerning

  Paul

  After talking to HP support, they say it is a unknown hardware problem and send a replacement.

  It seems that something is wrong with the ink system. Maybe it's a problem of cartridge or print head. Here is a link that can help you.

  http://support.HP.com/us-en/document/c03081973

  Let me know if it helps.

• Deskjet F380 blinking light print cartridge

  On my Deskjet F380 ink cartridge light flashes and and E shows. Computer tells me that there is a problem with the color ink. Have inserted the new HP cartridge and no results. Have out and checked the cartridges and print heads. Have followed the instructions to unplug, reset, etc. Have tried printing test sheet, but he won't. Have tried to change the route, but it will not be printed on the sheet that you need.

  It is true that I've used successfully refills and current black is always a refill. When I put in a new color refill, this all started. But now, I put in a HP, it still does not work!

  It makes me crazy when help guides say do you things like check his dial-up, or the door is closed. but then you don't give any help with real problems!

  Can someone out there please give me some advice. I am a school teacher and school closing very fast!

  Hello

  Follow the steps described in the documents on the link below.

  Cartridge problem ', "Incompatible cartridge", or "Missing or damaged cartridge" message on the computer after the installation of a cartridge

  Flashing lights

• my printer tells me to check my ink (color cartridge) but Istill get the same disorder. When Iput returns continuous blinking light.

  my printer in a single hppsc1610all, keeps telling me to check my color cartridge, so I remove and reseating it still continue to do the same. I USE A NEW BASKET. THIS CAN BE CORRECTED? OR DO iBUY a NEW PRINTER? AND IF SO BUY A WIRELESS NETWORK?

  Contact HP for help with this, as it is a hardware problem with the printer. It is not a problem of Windows, or Microsoft.

• Construction of a simple TIMER

  In my play on words, I have 30 levels of tiles from letter falling from the sky.

  I want to control these bays (video clips) as well as a timer, so that I can start, pause, and stop at specific times.

  I am doing something wrong with the timer code. It comes to getting the error message:

  TypeError: Error #1009: cannot access a property or method of a null object reference.

  to WordArray / startTileTimer)

  to WordArray / activeLevelofTiles)

  to WordArray / tileGenerator)

  to WordArray / levelGenerator)

  at WordArray()

  to wordText / initWordText)

  at flash.display::DisplayObjectContainer/addChild()

  to BugGoopFSGame / startTimer)

  How can I fix the timer? Should I have it added as an event somehow listener?

  Code below:

  package

  {

  import flash.display. *;

  import flash.text.TextField;

  import flash.events.Event;

  import flash.utils.Timer;

  import flash.events. *;

  import flash.events.MouseEvent;

  import flash.media.Sound;

  import flash.media.SoundChannel;

  / public dynamic class WordArray extends MovieClip

  {

  public var wordtext:wordText = new wordText;

  var activeWordArray:Array;

  var activeLevelofTenWordsArray:Array;

  var activeLevelofTilesArray:Array;

  public var letterArray:LetterArray;

  public var tileTimer:Timer;

  Video clips of to use letter tiles

  public var a: A = new A();

  public var f: F = //...etc

  private var wordArray:WordArray;

  private var letterTiles:Array = [a, f, g, h, i,... etc];

  private var lettersL01:Array = [, the, f, f, f, g, g, h, h, i, i, n, n, n, o, o, o, o, s, s, t, t, t].

  private var lettersL02:Array = [th, th, //...etc

  public var letterLevels:Array = [lettersL01, lettersL02, lettersL03,... etc];

  public var wordsL1W1:Array = ['a'];

  public var wordsL1W2:Array = ["h", "a","s"];

  .. .etc

  public var wordsL01:Array = [wordsL1W1, wordsL1W2, wordsL1W3, wordsL1W4, wordsL1W5, wordsL1W6, wordsL1W7, wordsL1W8, wordsL1W 9, wordsL1W10];

  public var wordsL02:Array = [wordsL2W1, / /... etc.]

  public var wordLevels:Array = [wordsL01, wordsL02, wordsL03,... etc.

  private var tf:TextField;

  the constructor code

  public void WordArray(_tf:TextField)

  {

  TF = _tf;

  levelGenerator();

  var tileTimer = new Timer (500,384);

  }

  function levelGenerator (): void

  {

  * To obtain a higher level of 10 words

  if(wordLevels.Length>0)

  {

  activeLevelofTenWords();

  tileGenerator();

  }

  on the other

  {

  Game is complete

  }

  }

  function activeLevelofTenWords (): void

  {

  * To get the next word

  activeLevelofTenWordsArray = wordLevels.shift ();

  nextWordF();

  }

  function tileGenerator (): void

  {

  if(letterLevels.Length>0)

  {

  activeLevelofTiles();

  }

  on the other

  {

  Game is complete

  }

  }

  function activeLevelofTiles (): void

  {

  activeLevelofTilesArray = letterLevels.shift ();

  shuffleTiles (activeLevelofTilesArray);

  trace (activeLevelofTilesArray);

  startTileTimer();

  }

  function shuffleTiles(a:Array)

  {

  var p:int;

  var t: *;

  var ivar:int;

  for (ivar =. Length-1; Ivar > = 0; Ivar-)

  {

  p = Math.Floor ((Ivar+1) * Math.Random ());

  t = a [ivar];

  a [ivar] = a [p];

  a [p] = t;

  }

  }

  function startTileTimer (): void

  {

  tileTimer.start ();

  Place the tiles to run

  * activeLevelofTilesArray.x = 399;

  activeLevelofTilesArray.y = 30;

  addChild (activeLevelofTilesArray); * /

  trace ("letters should run");

  }

  Rest of the code does not apply

  }

  }

  You created this timer in a function which means that as soon as you leave the service that it no longer exists because it is not level class. Make level class like some of your other variables:

  private var myTimer:Timer;

  So yes, you attach a listener TimerEvent him and specify a function.

  myTimer.addEventListener (TimerEvent.TIMER, _handleTimer);

  function _handleTimer(e:TimerEvent):void

  {

  what you want

  }

• my ipod does not turn. When I put on his orange light continues to blink.

  My Ipod shuffle is not coming. When I put on the pricing still show the orange light flashing continuously.

  Flashing light (by itself) does not indicate that a problem.  Blinking light means "do not disconnect - eject the iPod before disconnecting."  It shows there is a connection between the shuffle and computer data.

  Are you using a Mac or a Windows PC?  If Windows, which version (including 32-bit or 64-bit)?

  My Ipod shuffle is not coming.

  Don't know what that means...  The shuffle appears in iTunes when you connect?

• P1102w: P1102w - orange light blinking - won't initialize

  My printer won't boot and the orange light blinks. I tried to uninstall and reinstall the printer driver and firmware.  It also shows 'it can run out of toner' when I know that it is not. Cannot print page of test or anything else that he does not communicate with the computer. Help!

  Hey @cbloom57,

  Welcome to the Forums of HP Support!

  I understand that you have an orange light flashing on your Laserjet P1102w printer range. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once it is, while the printer is on, remove the power cable at the back of the printer for one minute. If you still see a flashing light orange, then the printer is more likely to have a recoverable hardware problem. This document explains How to resolve error lights on the printer.

  Please let me know the results after following the above. If you are able to clear the blinking light, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.