Construction of Dreamweaver site and the addition of joomla

Similar Questions

• I use iWeb to update a Web site and the objects appear in Safari unless you have a hyperlink when they download.  Is it because iWeb can only support a limited number of links, hypertext, or any other reason?

  I use iWeb to update a Web site and the objects appear in Safari unless you have a hyperlink when they download.  Is it because iWeb can only support a limited number of links, hypertext, or any other reason?

  It has been much discussed.

  See my solution in this post:

  Re: Re: iWeb Publishing Solution in El Capitan

• "due to an unidentified problem, windows cannot display windows firewall settings" fixed but still can not visit some sites and the laptop now turns off the coast on me. What should I do?

  I have an Apire one laptop with Windows xp service pace 3. I had to restore it to factory about 3 years ago. Some time after that the sound system began to slow and the Synaptics mouse stop working properly. I can move the pointer, but the left click does not work. It works in safe mode but not in normal windows. I used the Acer eRecovery for correct, but it did not work. I tried to download the driver for the mouse on the internet, but some how it could stop the download. I gave up at tring to fix. Some time in late March or early April, I couldn't access internet and after 22:30. I ran the diagnosis that is provided by internet explore and he said that the HTTP and HTTPS worked but the FTP did not work. AVG later told me my firewall is disabled and there was the possibility to reactivate it and I did. After internet explore stop allowing you to enter certain sites that I wanted to enter, I ran the Diagnostics again and he told me that a firewall client has been the cause of the problem. I tried to control my firewall setting, but had that "due to a problem not identified, windows cannot display the firewall settings". I thought AVG was the problem, so I have unintalled then he returned and attempted to access the firewall but got the same message. I typed in Google MySapce and found this site. I followed a few directions given to others in the thread started by joecarpenter33 and discovered that my firewall has been deleted and Base filtering engine has been deleted also. I downloaded and ran Malwarebytes ANti-Malware and SUPERAntiSpyware Free Edition and tdsskiller. MBAM has found a Trojan. The results of the analysis is less to:

  Malwarebytes Anti-Malware (Trial) 1.75.0.1300
  www.Malwarebytes.org

  Database version: v2013.04.10.14

  Windows XP Service Pack 3 x 86 NTFS (secure/setting network Mode)
  Internet Explorer 8.0.6001.18702
  Ziadie Berry: BERRY-LAPTOP [Director]

  Protection: disabled

  10/04/2013-17:44:54
  MBAM-log-2013-04-10 (17-44-54) .txt

  Scan type: quick scan
  Analyze the options enabled: memory | Startup | Registry | File system | Heuristic or Extra | Heuristics/Shuriken | PUPPY | PUM
  Analyze the options disabled: P2P
  Objects scanned: 271656
  Time elapsed: 43 minute (s), 42 second (s)

  The process of memory detected: 0
  (No malicious items detected)

  Modules of memory detected: 0
  (No malicious items detected)

  The registry keys detected: 0
  (No malicious items detected)

  The registry values detected: 0
  (No malicious items detected)

  Registry data items detected: 0
  (No malicious items detected)

  Files detected: 0
  (No malicious items detected)

  Files detected: 1
  C:\RECYCLER\S-1-5-21-4674304-3331980883-3375822000-500\$7832f44fdd2ba165f6ea01bec7f363fd\n (Trojan.0Access)-> quarantined and deleted successfully.

  (end)

  Malwarebytes Anti-Malware (Trial) 1.75.0.1300
  www.Malwarebytes.org

  Database version: v2013.04.10.14

  Windows XP Service Pack 3 x 86 NTFS
  Internet Explorer 8.0.6001.18702
  Ziadie Berry: BERRY-LAPTOP [Director]

  Protection: enabled

  10/04/2013 23:43:49
  MBAM-log-2013-04-10 (23-43-49) .txt

  Scan type: quick scan
  Analyze the options enabled: memory | Startup | Registry | File system | Heuristic or Extra | Heuristics/Shuriken | PUPPY | PUM
  Analyze the options disabled: P2P
  Objects scanned: 269636
  Elapsed time: 49 minute (s), 41 second (s)

  The process of memory detected: 0
  (No malicious items detected)

  Modules of memory detected: 0
  (No malicious items detected)

  The registry keys detected: 0
  (No malicious items detected)

  The registry values detected: 0
  (No malicious items detected)

  Registry data items detected: 0
  (No malicious items detected)

  Files detected: 0
  (No malicious items detected)

  Files detected: 1
  C:\WINDOWS\assembly\GAC\Desktop.ini (Rootkit.0access)-> quarantined and deleted successfully.

  (end)

  I ran the Diagnostics today after Internet explore and my other browsers stop allowing me to internet access. That's what came back:

  Diagnosis of last run time: 17/04/13 17:48:14 WinSock Diagnostic
  WinSock status

  attmpting error information to validate the Winsock base providers: 2
  error not all entries could be found in the basic services provider winsock catalog. A reboot is required.
  user redirection of information in support of the appeal

  Diagnosis of network adapter
  Network location detection

  Info to help home Internet connection
  Identification of network adapter

  Info network connection: name = Local, peripheral network connection = Realtek RTL8102E Family PCI - E Fast Ethernet NIC, MediaType = LAN, type = LAN
  Info network connection: name = wireless, peripheral network connection = Atheros AR5007EG Wireless Network Adapter, MediaType = LAN, type = Wireless
  Info both Ethernet connections and wireless available, ask the user for selection
  required user input action: select network connection
  Info Wireless connection selected
  State of the network adapter

  Info network connection status: connected

  HTTP, HTTPS, FTP Diagnostic
  HTTP, HTTPS, FTP connectivity

  WARN HTTPS: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
  warn HTTP: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
  warn HTTP: error 12029 connecting to www.hotmail.com: a connection with the server could not be established
  WARN HTTPS: error 12029 connecting to www.passport.net: a connection with the server could not be established
  WARN FTP (passive): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
  WARN FTP (active): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
  error could not make an HTTP connection.
  error could not make an HTTPS connection.
  error could not make an FTP connection.
   
  Still, he remains connected to the wirelesss connection, but won't let me access the internet. Right now I use a proxy to help, but access to the sites are limited.

  I used the tweaking software and my firewall is back but, I have yet to visit some sites and the laptop now turns off by itself.

  Hello

  Follow these methods.

  Method 1.

  Start the computer in safe mode with network and run a full scan of computer viruses.

  To start the computer in safe mode: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 2.

  If the steps above do not help, then try to scan the computer using Windows defender in offline mode and check if that helps.

  Search for spyware and other potentially unwanted software: http://windows.microsoft.com/en-US/windows7/Scan-for-spyware-and-other-potentially-unwanted-software

  What is Windows Defender Offline? : http://windows.microsoft.com/en-US/windows/what-is-windows-defender-offline

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 3.

  You can create a new user account and check. Once the new user account works fine, then copy the data from the old user account for the user account.

  How to copy data from a user profile damaged to a new profile in Windows XP: http://support.microsoft.com/kb/811151

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• I have a proof of purchase of my Adobe CC license, but according to the site and the app I'm in a free trial. I just got a new Mac and everything transferred and has been using the application on an old PC for a while so I'm not sure is this is what is ca

  I have a proof of purchase of my Adobe CC license, but according to the site and the app I'm in a free trial. I just got a new Mac and all transferred to an older Mac and has been using the application on an old PC for a while so I'm not sure is what is causing my problem. I have bank statements indicating payments of my subscription to Adobe for this product update.

  Hi Seth,

  First of all, disconnect, then back into creative cloud, using adobe id to pay for your subscription.

  https://helpx.Adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  Then, if you launch any product of CC 2015 and the pop up still shows a trial message window, please check this link for the resolution:

  https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html

  Hope this helps!

• I have a site published under a recent URL, I used for a personal site and the site displayed the URl needs to be removed, but I can't take it down because I do not know the account info that it is under please help! Thank you!

  I have a site published under a recent URL, I used for a personal site and the site displayed the URl needs to be removed, but I can't take it down because I do not know the account info that it is under please help! Thank you!

  If it is hosted with Adobe Business Catalyst Adobe Support can help you.

  If it is hosted elsewhere the only people who can help you with that is where it is hosted.

• I have that on the Home page of the site and the House only. The opening of Chrome or Safari latest menu 3 buttons do not work.

  I have that on the Home page of the site and the House only. The opening of Chrome or Safari latest menu 3 buttons do not work. But works fine in Solution Explorer and weird Firefox.Its. The site is baystatewiring.com see if you have the same problem. Does anyone have an idea?

  Add style = "" overflow: hidden ";" in your header tag:

  or add it to the css:

  #header {}

  overflow: hidden;

  }

• If I go to your stand at the NEC photographic show (21-24 March) can I expect to get personal help with using of items 13 - esp. vertical correction and the addition of sky to architects plans?

  If I go to your stand at the NEC photographic show (21-24 March) can I expect to get personal help with using of items 13 - esp. vertical correction and the addition of sky to architects plans?

  No, but Adobe offers a discount on the price of admission to the entire show. Adobe seminar room will be back this year yet, but are of demonstrations and public seminars. A number of speakers UK will be available, but the emphasis is on creative cloud, Lightroom and Photoshop CC.

  http://blogs.Adobe.com/richardcurtis/?p=4100

• Questions asked by a beginning.  CF, HTML, change of name/path of the folder and the addition of home page.

  
  Questions asked by a beginning. CF, HTML, change of name/path of the folder and the addition of home page.
  Hello, I got this new job and I'm trying to understand it as soon as possible. I'm a complete newbie to html, CF and web development
  Yes, I caught a few books, but if you can help me. I appreciate a lot is.
  
  I have this file structure
  Z:\ToExport\RepDocs\MyReport
  Pointing to this one
  http://myserver/MyReport/
  You will find a folder of MyReport
  And find 2 .cfm
  1 index
  2 version.cfm
  I have 2 BIG questions, ok 3
  
  HOW TO MAKE A PAGE THAT WILL CONTAIN
  The link of this MyReport.
  A home page. In other words.
  
  Homepage that contains a main report text
  Name of the division_
  
  Then a link called my reports. And your report
  Prefereably sorting
  
  · My reports.
  · Your report
  
  
  HOW CAN I CHANGE THE FOLDER
  Of
  Z:\ToExport\RepDocs\MyReport
  Pointing to this one
  http://myserver/MyReport/
  TO
  Z:\NewExport\repmining\myreport
  
  And then tap on it
  http://myserver/ repmining\myreport
  
  
  WHY IS THE REPDOCS NOT TYPED IN THE BROWSER WHEN YOU VIEW the MYREPORT. (I don't have to type (repdocs) to view the report)?
  in other words:
  Z:\ToExport\RepDocs\MyReport
  Is typed
  http://myserver/MyReport/
  
  without repdocs.
  
  Please excuse me.
  I am a true beginner.
  
  Thank you.
  Hope someone replies soon.
  Take care.
  
  

  OK, I think I understand your questions, so here:

  Quote:
  HOW TO MAKE A PAGE THAT WILL CONTAIN
  The link of this MyReport.

  Just have a link on a page, e.g.:
  TEXT of the LINK,
  As for your question on your reports, I don't understand what you're asking

  Quote:
  HOW CAN I CHANGE THE FOLDER
  Of
  Z:\ToExport\RepDocs\MyReport
  Pointing to this one
  http://myserver/MyReport/
  TO
  Z:\NewExport\repmining\myreport

  And then tap on it
  http://myserver/ repmining\myreport

  If you are directly connected to the server, simply create a folder (what looks like) Z:\ToExport\RepDocs\ which is the new name of Fortin, ex:
  Z:\ToExport\RepDocs\NEW_folder and put the files into it. If you are now directly connected to the server, use a program such as FTP server to connect via FTP and do the same thing.

  Quote:
  WHY IS THE REPDOCS NOT TYPED IN THE BROWSER WHEN YOU VIEW the MYREPORT. (I don't have to type (repdocs) to view the report)?
  in other words:
  Z:\ToExport\RepDocs\MyReport
  Is typed
  http://myserver/MyReport/

  It is simply because http://myserver/Myreport/ is set to point to the Z:\ToExport\RepDocs\MyReport file so it looks http://myserver is set on the Z:\ToExport\RepDocs\ folder anything you add to a folder which will be included.

  I have IE hop answered some of your questions

• First dreamweaver site - why the gap at the top?

  A fact my first dreamweaver site:

  < withdrawn at the request of the original poster >

  Why is the gap at the top? I don't see this in dreamweaver?

  -Mark

  You did not give your page a name. Sometimes that without title.

  It would be a title, not a name.

  The gap at the top is probably due to the upper margin of 1em by default on your p tag in the header.  -Change

  
  

  Hamilton place

  on this subject.

  
  

  Hamilton place

  and see what happens.

  Moreover, you would change better-

  {.style5}

  color: #FAF0E6;

  }

  -->

  {.iphoneBtn}

  do-family: Tahoma, Geneva, without serif.

  on this subject.

  {.style5}

  color: #FAF0E6;

  }

  {.iphoneBtn}

  do-family: Tahoma, Geneva, without serif.

  (you cannot have the HTML comments between the rules in a style sheet)

• Top sites and the browser history

  Hi, I'm on a Macbook Pro 2011 running OS X Yosemite 10.10.5, with several people using my login information. My question is - I have a site on my Top Sites, but when I look in the browser history I don't see. This means that the browser history was deleted? And if it appears in the Top Sites does this mean it has been visited frequently or not necessarily? Thanks v. much.

  Not necessarily. It is possible to add a site to the Top Sites with the add a bookmark function (inadvertently).

• The upgrade and the addition of material

  Hello

  This is my situation, I'm in music production, and I need to upgrade my PC to fit my needs. I'm looking to upgrade memory and RAM as well as the addition of firewire ports. The firewire port is very important because I need to connect an audio interface I. I know that I can get all these components, it is clear the fact that I don't know what is compatible and it would be better for me.

  I know I should be able to get the 16 GB of RAM, which would be much more than the 6 GB it holds. I only NEED 1 firewire port, but having 2 would be nice.

  I don't have a lot of money to update everything, so I'm trying to get what I need, and then I can save the rest.

  HP-Pavilion p6716f

  Windows 7 Home Premium

  64-bit operating system

  I have not upgraded the PC anyway, it is still stock.

  Thanks in advance for your help.

  You are welcome.  Thank you for the additional information.

  When upgrading memory, you must always match the memory that is already installed.  Otherwise, the new memory may not be compatible.  The motherboard of your computer is the Architecture Dual-Channel.  Therefore, it is better to install matched sets.  This is the memory that is recommended by Crucial.  They make very good memory.  In fact, HP uses their memory in a large number of their computers.

  This is a Firewire card that should work for you.  It has 3 external ports; (400 Mbps)-a 1394 and 1394b (800 Mbps).  If you decide not to buy this card, it is a good example of what you need.  You can watch other on Newegg to see what else is available.

  Please click "Thumbs Up" if I helped you and click on "Accept as Solution" If your problem is resolved.

• When I go to the Windows website I see an announcement to say that "Windows 8 for $14.99. Is this a legitimate site and the deal?

  This is supposed to be a thing where if you buy a new computer, you can switch to Windows 8 when it comes out for $14.99. When I try to go on the site, I get a popup saying that Firefox crashes due to a certificate problem. Is this a secure site? Here is the site showing the ad.  http://Windows.Microsoft.com/en-us/Windows/Home. The ad reads "Windows 8 for $14.99.  I don't understand why I can't access the site. I just bought a new computer (not the one I'm using now) from Best Buy and it should benefit from this. Can someone explain?

  Peace,

  BAT

  Try this:

  http://www.windowsupgradeoffer.com/

• I can't access my Web site and the Business Analytics: ERROR: this site is currently unavailable! I don't know why, it worked fine for 6 months!

  Hello

  A few months ago and it worked perfectly, I created the website www.cahega.fr. How ever, when I tried to go on the site this morning, it does "no start page.

  And when I try to log in on Adobe Business Catalyst® it sayq 'error, this site is currently unavailable!"

  What is going on?

  Please help me,

  Best regards

  H. piles

  Hello

  In fact, I've solved the problem! When you asked me to give you my Adobe I was using the wrong ID, I realized (one guest) and not that I used to create the Web site. The problem is now solved you were right he should bill pending, now it's fixed and the site is working!

  Thank you for everything!

  Héloïse

• Design of a Mobile Web site and the best Mobile detection Solution

  Last week, I decided to create a mobile version of one of my Web sites. I thought it would be a relatively easy task, but I quickly realized there is more that meet the eye.

  Without going into all the details (for example questions from the media, etc.), this is the strategy I ended up with...

  First step:

  I used this script to detect a mobile device...

  < script type = "text/javascript" >

  If (screen.width < = 400) {}

  document.location = ' http://mobile.MYURL.com';

  }

  < /script >

  I know that I could use the media queries or any number of other methods, but this one appeared to require the minimum of effort. For example, the media seems so complicated because I make sure I have the list of possible devices that can check out my Web site. The script above simply says, if the screen is small, view the mobile Web site. The downside is the person with the mobile device needs to have Javascript enabled, but very few people turn it off.

  Second step:

  I designed a special website for the mobile device.

  I could have created special CSS for each page to my Web site, but people don't want to read all the content I have on my Web site in any case, at least not on a mobile device. It was much easier to create a little site for mobile devices instead of make a huge CSS file to convert all my pages.

  ----------------------------------------------------------

  Because there are so many options when you create a mobile Web site, I just wanted to see if everyone here thinks I did it the right way or would you recommend an alternative?

  Also, I saw that he sent several times that I should include a link to the 'full version' of my site at the bottom of my mobile Web site. How I do that without creating an infinite loop that continues to send the visitor to the mobile version? In other words, when they click on 'full version' it will send them to the page that contains the script above, and this script will send their right to the mobile version.

  Thanks in advance for any suggestions or advice.

  All the best,

  Bill

  Separate sites for the version complete mobile vs is the best method. Just synchronize the data dynamically from database. Depending on the complexity of your site, the setting is completely different for a mobile version. Much, much more than just a style some conditional css rules. Device for side detection Server allows to redirect mobile users to the mobile version, which is usually a completely different directory or same site... ie. m.example.com mobile and example.com for the version complete.

  Similarly, you would use the reciprocal method of detecting device for side supported server to redirect anone who is NOT on a device to the full version if they visited the complete mobile URL from a web browser. You can use a cookie with detection on the server to allow the user to "switch" to the version side full and vice versa. Where if the cookie is not set and the device is mobile, then directly on the mobile device and display the button to switch to a comprehensive site that sets the cookie. Much of/and/of/ifelse/instructions if else going on there, but it can be done easily. I hope you get the point.

  best,

  Shocker

• Interleaving of Dreamweaver returns and the white spaces of files uploaded to my server

  Hello

  This same problem has been published here by several people about 5 months and never answered. I just upgraded to 10.7 and CS5.5 and I now have the same problem.
  

  Files downloaded using ftp in Dreamweaver have all formatting returns and whitespace removed from their part. The files are fine if they are uploaded via ftp using Fetch.

  When I view the source code of the uploaded file in my browser, all the code in the file is on a single line. This applies to JavaScript and HTML files. This stops the JS to work and causes the HTML will not display correctly.

  I went through the DW ftp settings advanced and experienced with on/off options. It doesn't change anything. I added some JS and HTML for writing, no effect exclusion list.

  I used an extra hard drive and did a clean install of 10.7 and 5.5 without change in the behavior of DW.

  Everything works perfectly using 10.4 and CS4.

  Any help would be appreciated.

  Thank you in advance.

  This is published periodically and as far as I know he is always answered.  But nevermind...

  The symptoms you describe are almost always related to incompatibility between the linebreak in the code type and the native type linebreak on the server.  Check your DW PREFERENCES and see that you specified under the Code Format > line break type:.  That must match the SERVER uses.