consumption of RAM mounts even without open tabs

Similar Questions

• I have a popup that says that I have a virus he locked a tab in safari. How can I restart safari without open tabs

  I have a popup that says that I have a virus he locked a tab in safari. I suspect the popup is a phishing attempt, and I didn't click on the OK button. I closed Safari, but whenever I have restart Safari he wants to open the tab with the context menu. How can I restart safari without open tabs? I now tried the SHIFT key while restarting.

  I'm runnning OX 10.8 and Safari 6.x.x

  Thank you

  Blake

  

  Blake,

  Read: Phony 'technical support' / 'ransomware' popups and web pages for a solution.

  

• Reopen Safari without open tabs from last session

  At a message pop up when you use Safari from MyMacProtection.com telling me that my mac has been infected by a virus and click OK to start the repair process, I'm sure it's the spam so I don't want to not click on it, but I am unable to do anything else.  I force quit Safari, but when I reopen it, all the same tabs with this pop-up open as well.  How can I re-open Safari without reopen all the tabs from the previous session?

  Run it with the SHIFT key or disconnect the computer from the Internet before launching.

  (138639)

• When I drop to the bottom of recent history how can I open a second a site already open tab without having to go to "switch to tab"?

  I often have several tabs in the same open site, but using the dropdown won't let me switch to the already open tab. Is there an easy way to do it without having to re - enter the site for each new tab? Disable the option "switch to tab"?

  There is an add-on that can disable this, go to the tab no more - https://addons.mozilla.org/firefox/addon/switch-to-tab-no-more

• Firefox 7 not to open the Web even in multiple tab, then try to open another tab, it jumps to the original tab

  Firefox 7 not allowing to open several tabs of the same Web site. When tried to open new tab already open web page then it jumps to originally alreay open tab and do not allow me to open multiple instance of the same site.

  Hello

  Instead click on the drop down suggestion try click on the go (-> arrow) on the right button. Another way would be to hit the 'Enter' key on the keyboard.

• on the technical task, my cpu is still 100% (without opening 1 program) and I can't do anything... virus?

  at one point, my computer started acting funny.  for example, he would play trailers (just sounds or non-video) without open programs.  checking task Mgr and also programs that are currently running, but trailer not played! strange.  now, when I turn on my computer, it is extremely slow, if not completely frozen.  I check the task mgr and it says CPU = 100% without doing me anything.  I have nearly 60 applications that run, but have no idea which are needed.  Help, please

  If you think you have cleaned up a bit - he envisions is Windows XP...

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do some cleaning and dusting off this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your WIndows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

  If you eventually want to install properly - you will need the installation media (or some way to restore the system to factory settings) and numbers of the product key partner/serial for Windows XP and all of your software installed individually.  You should have backups of things important to you - such as photos, music, documents, favorites/bookmarks Internet, emails, etc and so forth before you consider even to do something like that.

• Search for open tabs of AwesomeBar using % in front of the term does not work in 35 FF. Is this a problem, or am I missing something?

  This procedure to search open tabs of reference for many pages, but only a new tab opens. I tried both cela url (address) bar and the bar of search without success without success. The AwesomeBar should be activated or is there something I am doing wrong?

  I found references to the operator percentage here:

  http://blog.Mozilla.org/theden/2012/04/30/Firefox-tips-search-your-open-tabs/

  https://plus.Google.com/+Firefox/posts/GFdB534oWEK (these two say that the operator will in front of the term)

  (But this clarified things for me)
  and in the page you quoted, lowest in "change the results on the fly

  If you are looking for a particular type of outcome, such as a bookmark or tag, you can speed up the process to find by typing in special characters [after] each search term in the address bar separated by spaces:...

  The results are quite specific.

  My problem was that I had no connection at all with AutoComplete and wasn't looking for results but instead pressing on enter. No wonder. These are some gems for my purposes. Thanks for your help Curtis.

• everytime I open a new tab, the tab opens, but a double window opens in tray with duplicates from my window and all my open tabs.

  for several years, after uninstalling and reinstalling, I can not open a new tab without a double full being created with the same open tabs. Example of... I have a window with four tabs open. In my sandbox, I have 4 windows, all with the same 4 tabs. uugh!

  Could you check to see if you have a given box checked in the Options dialog box:

  "3-bar" menu button (or tools) > Options > tabs

  If "Show glimpses of tab in the Windows task bar" is turned on, instead of having an entry by the window, you get one entry per tab, uncheck the box to turn off.

• I don't see pictures to the owner/documents without opening each file individually. I just see the same image of a mountain and the Lake for each file.

  I don't see pictures (jpeg images) to the owner/documents without opening each file individually.  I just see the same image of a mountain and the Lake for each file.  When I look in windows XP, the JPEGs under 'my computer' and select 'film' or the 'miniature' I can see the image.  Why can I not see the image using Vista?

  I don't see pictures (jpeg images) to the owner/documents without opening each file individually.  I just see the same image of a mountain and the Lake for each file.  When I look in windows XP, the JPEGs under 'my computer' and select 'film' or the 'miniature' I can see the image.  Why can I not see the image using Vista?

  Start button > in the search box, type options records > press the Enter key > click on view tab > uncheck " always show icons, never thumbnails " > click OK for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• I can't see any image without opening it.

  I can't see any image without opening it. In a folder, I can see only the file and image files, not small image. Like, if I have 20 photo in a folder, I can see them in small sizes and then I manually open whoever I want. But I don't see them in small sizes in the folder.

  Method #1
  Start > in the search box, type Folder Options > press the Enter key > click
  View tab > uncheck always "show icons, never thumbnails" > OK

  
  Method #2

  Start button > Control Panel > Classic view > systems > left column, system settings advanced > Performance tab, click on settings > tab Visual effects, click 'Show thumbnails instead of icons' > OK

• RAM Mount

  Hello everyone.  I know I'm new to the site but I had a lot of HP computers in my life.  One I have a question at the moment is my HP Pavilion dv7 Notebook PC.  With my work, it would be easier if I had a Ram Mount for my car since I take it with me on the road every day.  I measured my laptop to be about 16.5 inches long and 11 inches depth.  I'm looking for only around a Ram Mount for my car but can't find anything big enough for that.  I currently drive a VW 07 rabbit and if possible, I want that he be connected via the bolts on the passenger seat so that it'll be stronger without having to drill additional holes in the car.  Thanks for any help.

  Try here:

  http://www.RAM-mount.com/products/LaptopMounts/tabid/1510/default.aspx#/Wizard

• PRE7: problem of proportions even before opening the source media files

  Hello

  I am a newbie in Premiere Elements. Read a lot of discussions with problems of proportions, but found no problem similar to mine, so decided to open a new discussion.

  I'm shooting video camcorder Samsung HMX-H105 SSD, in 16:9 widescreen HD video.

  When I try to create a DVD from the camcorder MP4 file, it gets asymmetrical even before opening it, when you see in the right pane with the view of the media files. I don't know if anyone can understand what I'm trying to say so I have a screen shot of a video I shot with my camera and a video I downloaded, photographed by someone else with Samsung HMX - H20 in 16:9 HD as well.

  Then, even when I always start a new project in 4:3 and 16:9 my videos is not stretched. That's why I think that maybe first Elements does not understand the format of my MP4 video files - it can be seen in the left pane, where I circled (with white elipse) black stripes above and below the video.

  Hope someone can help with my problem.

  I could not find any records on the Samsung website to indicate it as a real camcorder AVCHD (even if it's the video uses a form of the H.264 codec).

  If this isn't an AVCHD camcorder, you will probably be able to edit video natively in Premiere Elements. Or, if you can, you will need to re - interpret the film to the big screen.

  First make sure that your project uses the AVCHD project setting. Then, if your video is looking "stretched" with the right button on the clips and select the option to interpret the film and select a setting that gives you a correct display.

  This will probably be a very intensive format, so I recommend to work on your project in short pieces you want, then save them often! (You also need a considerably fast computer with plenty of RAM).

• Dreamweaver 6.1 - JavaScript error when switching between open tabs

  When you switch between open tabs, occurs a series of javascript errors. I had not used Dreamweaver for about 2 weeks, and the last time that I used it without any problems.
  
  I tried to uninstall, OKing deleting all files when asked, re - install and update with dwmx61_updater.exe, but I still get the same errors.
  
  This made it virtually unusable software, so any help would be greatly appreciated, as I'm working to a deadline approaches quickly.
  
  
  'While executing Browse_Back activated within toolbars.xml, a JavaScript error has occurred"
  followed by
  'While executing Browse_Forward activated within toolbars.xml, a JavaScript error has occurred"
  followed by
  'While executing Browse_Stop activated within toolbars.xml, a JavaScript error has occurred"
  
  The code seems to be:
  
  <!--> browser nav toolbar
  
  < id toolbar = "Browser_Toolbar" platform = "win" label = "Browser Navigation" container = 'document' initiallyVisible = "false" >
  
  < id button = "Browse_Back."
  image="toolbars/images/mm/back.gif".
  disabledImage="Toolbars/images/MM/back_dis.gif".
  ToolTip = 'return '.
  Label = 'return '.
  Enabled = "DW.getDocumentDOM (). Browser.isCmdEnabled ('back').
  Command = "DW.getDocumentDOM (). Browser.backPage ().
  Update = "onEveryIdle" / >
  
  < id button = "Browse_Forward."
  image="toolbars/images/mm/forward.gif".
  disabledImage="Toolbars/images/MM/forward_dis.gif".
  ToolTip = "forward".
  label = "forward".
  Enabled = "DW.getDocumentDOM (). Browser.isCmdEnabled ('forward').
  Command = "DW.getDocumentDOM (). Browser.forwardPage ().
  Update = "onEveryIdle" / >
  
  < id button = "Browse_Stop."
  image="toolbars/images/mm/stop.gif".
  disabledImage="Toolbars/images/MM/stop_dis.gif".
  ToolTip = "Stop".
  label = "Stop".
  Enabled = "DW.getDocumentDOM (). Browser.getPageBusy ().
  Command = "DW.getDocumentDOM (). Browser.stopPage ().
  Update = "onBrowserPageBusyChange" / >
  
  < id button = "Browse_Refresh."
  image="toolbars/images/mm/browserRefresh.gif".
  ToolTip = "refresh."
  label = "refresh."
  enabled = "true".
  Command = "DW.getDocumentDOM (). Browser.refreshPage () "/ >"
  
  
  
  probably the next error is caused by the previous ones have failed:
  
  "While running to getCurrentValue in AddressURL.htm, a JavaScript error occurred"
  the subprojects tcode:
  
  
  getCurrentValue() function
  {
  var dom = DW.getDocumentDOM ();
  var value = dom.browser.getURL ();
  If (value & & value.length)
  {
  check if it isn't a temp file
  excerpt from the tail of the url
  var filename = value;
  var slashIndex = filename.lastIndexOf("/");
  filename = filename.substring (slashIndex + 1);
  var tempIndex = filename.indexOf ("TMP");
  If (tempIndex! = 0)
  {
  addRecentAddress (value);
  }
  }
  Returns the value;
  }
  

  Out of curiosity, I uninstalled IE7 beta 3, as it was the only program I thought that may be important that has been installed since last Dreamweaver work properly - and guess what? -the problem disappeared!

  Thanks again for your help - I hope this topic can be useful to someone else.

• The sidebar to view the columns of the table without opening table

  In earlier versions of SQL developer, when I clicked on the button "expand" next to a table, it would be a list of columns that the table had without open the table in the main window. If I right click on the name of the table, there are open table.
  
  Is there a way to get 2.1 to return to this behavior?

  Open objects with a single click Explorer to be controlled through tools | Preferences | Database | ObjectViewer | Open the object by a simple click. I have it turned off and that it must be a double click on the name or right click and select open before the opening of the object browser. However, even with this, I need to click on the name of the object (not the 'expand' button) before the object viewer opens. By clicking on the button "expand" always expands the list of columns and open object viewer regardless of the value of preference.

  theFurryOne

• How do I know if my iPhone facetime without opening the box (iPhone OS)

  How know if my iPhone's facetime without opening the box

  Buy a phone from an authoritative source outside of the Middle East.