Contacts of printing does not work in Lion

Similar Questions

• I put a new ink jet cartridge in the printer and the printer does not work although it is switched on

  Cartridge replacement installed on a lexmark 730 printer inkjet series all the cables and connections ok but the printer does not work

  Hello

  as the poblem started when you changed the ink cartridge contact Lexmark

  http://support.Lexmark.com/index?page=home&channel=supportAndDownloads&locale=en&UserLocale=en_AU

• I downloaded the new software recently and now my Epsom printer does not work

  iMac late 2009. Processor 3.06 GHz

  Hi, I downloaded the new software recently and now my Epsom printer does not work and my Wi - Fi on the computer keeps dropping out.

  I spoke with Epsom and they recommended to remove the drivers and reinstall them. Now, I can not install the ad pilots Wi - Fi does not work correctly. The research on this forum I see there have been many problems with the new version of the software. Can someone help me?

  < re-titled by host >

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

• Installed at El Capitan and now HP printer does not work via the network

  Installed at El Capitan and now HP printer does not work via wireless network

  Open system preferences > printers and Scanners and select the print tab.

  Then the right or control click on the HP printer on the left then click: reset the printing system

• my printer does not work well

  MY PRINTER DOES NOT WORK WITH FIREFOX. WHAT DO I DO? THANK U

  https://support.Mozilla.org/en-us/KB/how-print-websites

• My printer does not work on Firefox?

  My printer does not work on Firefox? It works on explore?

  "My printer does not work on Firefox" gives no details on the problem. It is a good starting point:

  • http://KB.mozillazine.org/Problems_printing_web_pages

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You must update some plug-ins:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox

• changed router photosmart b110 e-all-in-one printer does not work

  changed router photosmart b110 e-all-in-one printer does not work

  Hi aged60,

  I'm sorry to hear that you have linking problems with your Photosmart B110 printer.

  I've included a link to HP Wireless Printing Center Troubleshooting web page.  In the section entitled "your printer was working on the network before and now is not" there are clear instructions to follow when your router has been changed or updated.  If you follow the instructions you should be able to communicate with your printer.

  HP wireless printing Center - Troubleshooting

  http://www.HP.com/global/us/en/wireless/troubleshooting.html

• Canon MX700 printer does not work

  After the update of El Capitan on my iMac, my Canon MX700 printer does not work. UGH!

  Mine has stopped working on Yosemite.  You have an old Mac OS X installed you can test it on?  You can run the test page for the printer itself?  I get the right error messages try to run the printer, and I ended up Canon to accept to sell me a MX922 at a discount.

• Smart Web printing does not work in IE9

  Smart Web printing does not work in IE9...

  I tried option, uninstall web printing smart hp and reinstalled. now it works... also if you use a pop up blocker, then you have to give permission to allow access to this site. It will come up as a small secondary window and print as did former windows messages.

• New Modem - like get a new modem my printer does not work

  Since obtaining a new modem, my printer does not work. The printer is a HP 4500 wireless all-in-one. What should I do?

  Hi reillydebra,

  1. you have made no changes to the computer before the broadcast took place?
  2. do you get an error message?
  3. what operating system do you use?

  If you use Windows 7, try the steps from the following link:

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Additional information:
  Check if you need to open ports in the modem.
  http://h20563.www2.HP.com/p/_wireless/troubleshooting.html
  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=59455&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=3919449

• MS Office 2010 Pro and my printer does not work,

  I just installed MS Office 2010 Pro and my printer does not work, I tried to print a test page for the printer, but that prints either, ask if I want to troubleshoot the printer and when I click on Yes, I get a message that there is a problem of ActiveX.  The printer will not print not any application, but it worked before installing office.
  All the apps work except in order to print it.
  I am running WinXPPro w/sp3.

  Jim K.

  Hello

  1. What is the exact error message?
  2. don't you make changes on the computer before the show?
  3. What is the brand and model of the printer?
  4. this problem occurs with all files that contain the Active X objects or specific file?

  Method 1:
  Run the fix it and check.
  http://support.Microsoft.com/mats/printing_problems/en-us

  Method 2:
  Try the steps in the link and check.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 3:
  

  This problem occurs if the security settings for the Local computer zone are configured to prevent the ActiveX content to run.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry : how to back up and restore the registry in Windows

  a. Click Start and run, type regedit.exe, and then click OK.

  b. expand the following registry subkey:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\0

  (c) in the right pane, right-click 1200 and then click on edit.

  d. in the value data box, type 0. Then, click OK.

  e. close the registry editor.

• HP 2549: HP 2549 and Mac OS x: double-sided printing does not work

  Hello!

  I just installed this printer on my Macbook Air and I cannot print double-sided. I tried by USB / wireless (in the case where there is a difference between the two) but no luck.

  I followed the advice in this post: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/two-sided-printing-no-longer-availble-...

  but I did not tab "driver". I only have "Général", "Levels of power" and "utility." I tried to delete the printer and then add it with HP 2359 and AirPrint not but that does not change.

  When I print a pdf document, double-sided printed is greyed out and I cannot change.

  What should I do? I already reinstalled the drivers on the HP Web site, I selected all the things that I can install it, but that has not changed anything.

  Thank you.

  Hi @blablaalf,

  Welcome to the HP Forums!

  I see that two-sided printing does not work with your printer HP 2549 on Mac OS X 10.10. I'm happy to help with this problem!

  I assume that your printer is a HP Deskjet 2549, otherwise please reply with the exact type of printer you have. To find product/model number of your printer follow the instructions in this link. Find your model number of the HP product.

  Otherwise, if the type of printer you have. According to this guide, print on both sides of the paper (duplex printing). He said: this printer is not an automatic duplex unit integrated, you can always print on both sides of the page to manually reload paper in the paper after printing tray first to print on both sides of the paper.

  This is the reason why this option is grayed out.

  If you print on letterhead, pre-printed paper or paper with watermarks and pre-drilled holes, the printer prints first the front of the document. Load the paper with the top edge first and the side to be printed facing downwards.

• my work of collapsed app coil system, help printer does not work

  my work of collapsed app coil system, help printer does not work

  Hello

  1. What is the brand and model of the printer?

  2. do you have an error message when you try to print?

  3. were there any changes (hardware or software) to the computer before the show?

  Perform the steps suggested by chan seen from the link below and see if it helps.

  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  Hope this information helps.

• Konika Minolta Pagepro 1350 printer does not work

  I have the Konika Minolta pagepro printer connected by USb port to the Desk top Acer 1350 and the printer does not work. Display error message - sending to the printer and do not print anything.
  Please help me...

  Truong Hai

  http://onyxftp.mykonicaminolta.com/download/Search.aspx?HT=

  Look at the link above for drivers > click on the category of product and to follow around the Menus that appear:

  Desktop printer > PagePro 1350W > drivers > operating system > NO vista drivers...

  All I can find is a PagePro 1350W, who had written for her until the XP operating system printer drivers; not for Vista.

  Time to upgrade your printer.

  See you soon. Mick Murphy - Microsoft partner

• My canon s200spx printer does not work on windows 7. I can't find a drive

  My canon s200spx printer does not work on windows 7. I can't find a drive

  Hello

  1. do you have a code error message when you try to print?

  2. don't you make changes to the computer before the show?

  3. you are unable to find the drivers for the printer?

  I suggest for the link and follow the steps in the article:

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  You can also download and install the latest drivers from the manufacturer's website:

  Reference:

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/s_series/S200#DriversAndSoftware

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.