Content generation error - string version was not the right format

Similar Questions

• input string was not in the right format, fix it?

  I get this message when you try to download Microsoft Fix It...

  input string was not in the right format.

  How can I fix?  I'm a novis.

  Sincerely,

  Nancy

  If I were you, I wouldn't bother with Microsoft FixIts.

  Why don't ask you a question with an object that describes your problem and give some details about it?  See How to ask a question.
  At a minimum, include the following:

  • What version of Windows you have, including the Service Pack (right click on desktop and select properties)
  • the brand and model of your computer and any other involved material (for example, a printer)
  • a description of your problem in as much detail as you can; There is no charge "by the word" to post questions here
  • the full text of the error without paraphrase messages
  • something unusual happened to your system, shortly before the problem started

  And insofar as this error "input string was not in the correct format?  This seems to be a common problem that Microsoft keep because it creates new tools 'FixIt '.

  There is a support forum for Microsoft FixIt Center in which this right was requested more than 2 years, on September 14, 2010.  The next day, a Microsoft employee answered and said that Microsoft was aware of the problem and that he had set. There are lost then several positions - in the same thread - AUGUST 2011 to September 2012 all reports the same problem... and here, you are as well.

• Cannot access the network drive or impossible to mount the network drive. Error "network path was not found.

  Original title: network path was not found

  HI, after the upgradation from windows xp sp2 to sp3 (next to the customer) I can't access the network drive or impossible to mount the network drive. ' ' It showa error "network path was not found.

  Hi gauravadavadkar,

  Thanks for posting your query in Microsoft Communities. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         What is the full error message?

  ·         Work on a domain?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with networkand check if the problem persists.

  S tep 2: if the problem does not persist in safe mode with networking, perform a clean bootto see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the steps to configure Windows to use a Normal startup state section of the article to start the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Startand then click run.

  (b) type msconfigand click OK.
  The System Configuration utility dialog box appears.

  (c) click on the general tab, click Normal Startup - load all device drivers and services, and then click OK.

  (d) when you are prompted, click restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  In Windows network connection issues

  You can read this article for more information:

  Windows wireless and wired network connection problems

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• I'm on PC Win 7 and bought, downloaded and installed Lightroom 6 the day it was released. When he downloaded and installed it seems to be the version CC, not the LR6. I entered my license number and it works on my computer, but it has Adobe CC

  I'm on PC Win 7 and bought, downloaded and installed Lightroom 6 the day it was released. When he downloaded and installed it seems to be the version CC, not the LR6. I entered my license number and it works on my computer, but there CC Adobe on my desk and I don't want that on my computer. How can I remove the Adobe CC from my computer and still have 6 installed Lightroom and working?

  If you are unable to remove Adobe Creative cloud Control Panel, see link below:

  https://forums.Adobe.com/thread/1846925

• Folio Builder content generation error: error processing files

  Using the latest version of PC of Indesign CC I get this error.

  The indesign document is a document of multistate. At some point after you add States, I can't update the document in foliobuilder more and get (translated from the Dutch right Synax may be different):

  Creation of Article

  Article

  Content generation error

  [File processing error]

  I tried things like:

  -with the help of another userID folio/Adobe

  -put filed of LAN 2 (with the reissue of links)

  -removal of several States (at one point, the issue is resolved, but when I add new States the problem is reintroduced)

  -the document splitting (2 x 10 States does'nt fix this)

  -added several States (making copies and do not change content yet) it works. As soon as I start changing the content this error comes back.

  Please suggestions!

  It took me a lot of time, but I think I finally found the answer.

  In 'Names of State', spaces are allowed, but if your total of spaces in the names of all the 'State' in a folio is about more than 45 you get this problem.

  My solution is not to use spaces in "names of State." I don't have problems with & - or.

• Fatal error. Object was not found.

  Hello

  I built aninstaller package that includes:

  3 x .exe

  LabVIEW2009 Dev Environment

  VISA Runtime Environment

  NOR-DAQmx

  When I try to run the Setup program (from the local hard disk) I get the following error, any ideas anyone?

  At soon inadvance, Alec

  .\Distribution.cpp(320): IInstallerError 10002
  Fatal error. Object was not found.
  class CPart object lookup by ProductCode cannot find the object {9A832E3A-8676-41CC-A945-9C6827D00B4C}

  I was building the installer directly on a network drive. If you create the installer on site and then copy it to a network drive, it works fine.

• Hi, I have adobe CC for teams, a member of the team has problems, opening indesign, asked for a serial number, ive checked on our admin account and it is one our our registrants 'members '. I was not the person who created this original so I'm a little

  Hi, I have adobe CC for teams, a member of the team has problems, opening indesign, asked for a serial number, ive checked on our admin account and it is one our our registrants 'members '. I was not the person who created this original so I'm a little lost, I can't seem to find the serial numbers on my account and it seems like we don't have the qualified products? can you help me?

  Hello

  We checked the details of your team, all seats are assigned correctly.

  Now, there are a few details that we need in a private Message so that I can help you properly.

  Name of the user:

  User email:

  In the meantime, try it out below mentioned links.

  • Creative Cloud applications ask for serial number
  • Log, activation, or connection errors. CS5.5 and later, Acrobat DC

  [Note: the details we need is critical, make sure you send by private Message only.]

  Thank you

  Atul Saini

• Microsoft fix - it message 'string input not in the right format. '

  Microsoft fix - it message 'string input not in the right format", I have uninstalled & reinstalled. always the same problem on all fix - its

  Hello

  The following forum would be more suited for this question.

  Microsoft Fix it Center - NOT for general support questions
  http://social.Microsoft.com/forums/en-us/fixitcenter/threads

• Microsoft It - fix diagnose and repair Windows and problems would not install on my computer. He said the chain was not in the right format. Clues?

  I installed Microsoft Fix It on my computer (MSXP). The diagnosis and repair of the Windows files and problems would not install on my computer. He said the chain was not in the right format.  Clues?

  Hi Kathryn1713,

  ·         You are not able to run the Microsoft Fixit tool?

  If so, you can post your query on the Forums of Microsoft Fixit. Please see the following link for the same.

  Microsoft Fix Center - NO support general questions Forum

• Adding new SCSI controller: "error string: invalid operation for the '0' device.»

  Hello

  I have a problem when I try to add a SCSI controller to a virtual machine.

  I have this error:

  Error string: invalid operation for the device '0'.

  Lack of details: InvalidDeviceOperation

  Here is my code:

  my $info = Description-> new (label = > summary of "" SCSI controller 2 ' = > 'LSI Logic parallel' ");

  my $controller = VirtualLsiLogicController-> new)

  deviceInfo = > $info,

  scsiCtlrUnitNumber = > '7'.

  sharedBus = > VirtualSCSISharing-> new ('noSharing'),

  busNumber = >-1,

  key = >-1,

  backup = > $backing_info,

  controllerKey = > 100,

  );

  My $devspec = VirtualDeviceConfigSpec-> new (operation = > VirtualDeviceConfigSpecOperation-> new ('add'),)

  device = > $controller,

  fileOperation = > VirtualDeviceConfigSpecFileOperation-> new ('create').

  );

  My $vmspec = VirtualMachineConfigSpec-> new (deviceChange = > [$devspec]);

  {eval

  $vm_view-> ReconfigVM (spec = > $vmspec);

  Util::trace (0, "Controller has been created. \n") ;

  };

  I don't know how to handle, or even how to solve problems.

  Any ideas would be greatly appreciated.

  Kind regards

  Jeremy

  I finally found a solution.

  It seems that it fails if you give a marked as mandatory parameter (scsiCtlrUnitNumber, hotAddRemove)... Theses parameters seem to be set automatically, a dump of the device which will show.

  Here's the code used:

  My = $controller_spec

  VirtualDeviceConfigSpec-> new (device-online VirtualLsiLogicController-> new (key-online 0

  device-online [0],

  busNumber => $scsi_controller.

  sharedBus => VirtualSCSISharing-> new ('noSharing')),

  operation => VirtualDeviceConfigSpecOperation-> new ('Add'));

  My $vmspec = VirtualMachineConfigSpec-> new (deviceChange-online [$controller_spec]);

  {eval

  $vm_view-> ReconfigVM (spec-online $vmspec);

  };

• Windows 7 Upgrade, saying that it is not the right disc

  I have the HP Windows 7 upgrade CD of 2009 and I'm trying to install it on my genuine HP laptop. First of all, I inserted the CD that is labeled insert everything first. After that everything was checked, I was then asked to insert the upgrade CD, I did, but then I received a notification that the disc I inserted is not the right disk. The CD I'm insertion is the support for Windows 7 Home Premium Upgrade, two CDs have been sent to Microsoft. Is there something I'm missing or is there a way I can work around this problem.

  Looking forward to any help, thank you.

  Note: Running Windows Vista

  Moved from Vista to install, upgrade and activate Forum.

  You try to upgrade to the wrong architecture.

  When important changes to your computer, for example an upgrade, it is always recommended that you back up your system before installing a new version of Windows. In your case, you can upgrade to Windows 7 depending on the edition and the architecture of Windows Vista, you have installed. If you are running a 32-bit version of Vista and upgrade to a 64-bit (Windows 7 edition) version, you'll have a pure make install, it is the opposite case.

  If you are using Windows Vista Home Basic or Premium consumer editions, you can only upgrade to Windows 7 Home Premium or Ultimate. In addition, you can make downgrades, which means, if you are running Windows Vista Ultimate Edition now, you cannot downgrade to Windows 7 Home Premium. You perform logical upgrades:

  Windows Vista Home Basic > Windows 7 Home Basic, Premium or Ultimate

  Windows Vista Edition Home Premium > Windows 7 Home Premium or Ultimate

  Windows Vista Business > Windows 7 Professional, enterprise or ultimate edition

  Windows Vista Business > Windows 7 Enterprise

  Windows Vista Ultimate > Windows 7 Ultimate.

  My PC running the 32-bit version or 64-bit Windows?

  http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit

• When connecting on MacMini, password is auto-complete with a myriad of points and is not the right password

  When connecting on MacMini after I click on the user, the password field is auto-complete with a myriad of points and is not the right password.

  There suddenly / maybe after the most recent update 2015-008, which I installed it on 8 January 2016.

  I need to delete points, usually I can remove them by double clicking on it and pressing the delete key, but they will not simply remove by clicking in the field and using the delete key, as would be normal. Sometimes it takes a few tries to remove the points, and then I can connect.

  Does my keyboard or a virus, my usb port, the update of security or something else...?

  I use this computer without problem for a few years.

  Thank you, Kathy

  osX version 10.9.5 processor 2.3 GHz intel core 17

  First try another KB

  Next

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  Subject of memory NVRAM and PRAM

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

  Format the boot disk and then do a fresh install of Mac OS x

• Could not complete your request because it is not the right kind of document.

  This problem has been occurring for a day now and I honestly have no idea why, I followed the instructions. I've updated my camera raw and photoshop for the latest plugin. I am trying to open an avi file, but it won't open it. Lasts 4 seconds. Usually I was able but yesterday when I tried to open it, it says "Could not complete your request because it is not the right kind of document." Any suggestions because I'm doing the gifs, but I can't because photoshop won't let me open the avi file. file.

  You use file > import > video frames to layers?

• "not the right kind of document" - eps & ps

  This seems to be a problem with photoshop, as I see it.

  The strange thing is that Photoshop CS2 can open files, EPS and PS, which was very convenient to generate a tiff high-resolution InDesign layouts. Now, suddenly, it cannot open or postscript file - and reads "could not complete your request because it is not the right kind of document.

  I re-installed Photoshop Album CreativeSuite; I also tried to apply the steps from here http://kb2.adobe.com/cps/329/329945.html , but the only "solution" was to recreate the preferences file, which did not help either.

  Clues? Thanks in advance.

  System: Win XP, SP3 / Adobe CS 2 Premium with updates / 3 GB RAM

  Move it back where it belongs, as well as other plug-ins you moved to the presets folder by mistake.

• I want my categories to bookmarks to open on the left, not the right.

  When my favorites opens and I go to a subcategory, they open on the right side of the page and I would like to make them open on the left side of the page. Also, there is a large gap between the subject and the arrow of sub categories, such as about eight inches across the page. They bring closer that sometimes when I move the arrow all the way through to the triangle that comes out the subcategory he shifts to an another subcategory.
  Thanks for your help.

  Who did reduce the width of the page, but it didn't help me find ways make the subtopic open on the left side, not the right as it does now. He did this Fire Fox update itself. Thanks for the initial information if the part worked. Aloha