ContentHandler SEND called directly from camera - where are given?
It is a known issue that has been registered Issue Tracker here: https://www.blackberry.com/jira/browse/JAVAAPI-963
Tags: BlackBerry Developers
Similar Questions
-
Send calls directly to voicemail problem
When I click on the checkbox to send calls directly to voicemail, it checks, but as soon as I change screens and return to the options of the checkbox is unchecked. I searched to see if this issue had been discussed at the forum Droid 3, unless I missed it I think. Anyone else having this problem and if so any difficulty?
Thanks Joelbon. I fixed the problem by removing the contact and adding them. I'll try what you suggested, if I run again the issue.
-
Send pictures directly from LR cc - in order
I want to send a set of pictures that I took in the same order, but when I select them for emailing, whatever first to last or last first, my email (using Mail on Mac) always orders them and sends to the last to the first. Is there something I'm not doing correctly?
Thank you
It could be that the email client uses Apple OS to integrate the images into the message.
The only work is about to export images to a folder and attach each separately in the order you need.
-
My iPhone will not send photos or other documents directly from in Apps
My iPhone 5 has always been able to send photos directly from the Photo App, as well as sending PDF files directly from the Pages App or other documents from other applications. Now, it is no more the case. After hitting the "send" - button, you hear the his "Whoosh"but nothing is actually sent! ".
I discovered only after people complained to me for not getting points I thought that I had sent.
When you import the same documents in Mail, there is no problem at all they are sent. The problem exists only IN applications.
I tried to restart the phone several times as well as resetting - no change.
It isn't a question of 2 check points.
I would be very grateful if someone knew the solution to this problem.
See you soon!
I think the next thing I would try is to reset all settings. Settings > general > reset > reset all settings. This will return t e the device settings, to where they were out of the box - to the factory settings. You will need to enter all the settings again including WiFi passwords.
If this does not work, back up, restore settings, and then restore the backup. If it still does not work, restore like new.
How to clear your iOS device and then set up as a new device or restore from backups - Apple Support
The backup of your iPhone, iPad and iPod touch - Apple Support
Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support
-
How to send a fax directly from a file stored on my hard drive
I recently bought a HP Officejet 4500 G510a-f. At present, what I do is I have make the copy of the text of the fax with my M S Word program and then make a print off of it. After graduating I feel keep on the flat of my this printer, then send the fax. This way I could save ink and paper and time.
My opinion is:
Could I think I send fax direct from the word file that I did on my drive hard woitout make an impression on the file with this HP Officejet 4500 G510a-f? Yes well if want to guide? I'll be grateful.
Hello
You can send a fax from your computer by using the Fax printer queue if you have the full feature software installed:
From within Word, click file > print.
Beside the general printer you get extra copy listed as HP Officket 4500 Series Fax.
Select this printer, and then click on print.
Send a Fax from dialog enter the target phone number, mark the job as black & white and click on send, the file will be sent right by the fax machine.
Shlomi
-
Is it possible to send money directly to the bank account of the friend using apple pay?
I think that I heard that it will soon be possible to send money directly from my bank account to bank account a friend with us using apple two pay.
Is this true? And if it is, when can we do this? Or is this already available?
Thank you!
No, until Apple made the announcement, no one knows.
-
When I send an email from my iPad Air and attach a photo usping the camera icon, it is received on the devices not Apple very extended and unable to be read. What I am doing wrong?
You're probably doing nothing wrong.
One thing to try is after inserting that tap photo images and then change the size. If it works, you have my CCC friend to thank for calling your issue to my attention.
Tap.
Tap.
Receipt by e-mail.
-
I've just updated to LR5. I also have a new camera. Nikon D800. Try importing directly (from the camera) in LR. But without success. Get the following message. "The files are a camera which is not recognized by the raw format support in Lightroom." How can I import it please?
I find the program file for Lightroom 5 and make an icon of office for him. And I would get rid of Lightroom 3. If you open Lightroom 3 and you see images in the old catalog, not the updated one.
-
I'm recently back from Berlin where I accidentally left my iPhone 6. My friend tried to send it to me; However, he was returned by customs. Need advice on getting my iPhone of Berlin has been sent to California.
You'll have to talk to the German customs and find out what their requirements are to send an iPhone.
-
Where are the saved files that someone sends you through Skype Windows8
Hello
I just bought a new computer that has windows 8 installed above and I must say that I was shocked when I realized that the system is like that running a pad that is so bad, if you want to actually work with the computer.
Then, I installed Skype and was amazed that there is nothing that you can do with it. No video call?
I use Skype to send files and make video calls. Now, when someone sends me a file I have no choice where this file is saved... Where are the files stored?
OS: Windows 8
Thank you
type in your windows search bar
'%AppData% '.
then you will go to the folder "Skype".
and there will be a folder with "my received files."
had the same problem and figured it out -
Call the library function does not find the DLL in the directory where are my LLBs
I'm using LabVIEW 8.6. I have a set of screws in several LLBs. All LLBs located in a directory. Most of my screws is wrappers for the functions in a DLL. I was told to put my DLL in the directory where are the LLBs, and apparently this is how the previous programmer has worked (using an earlier version of LabView).
In the configuration of the library call, I've specified
.dll without path. (This is how we want our screws are an API that will integrate other programmers, so I don't know where they put things and I can't use absolute paths). When I insert the VIs in LabVIEW, LabVIEW can not find the DLL and wonder of spotted. It's just that here in the directory with the LLBs and when I double click on it, everything works fine. However my absolute path to the DLL now appears in the library to call configuration, and we don't want that.
Does anyone know how to make this work? I guess the location of the screw (or LLBs, in this case) should be the current directory and thus Windows search there for the DLL. However, it seems that this is not the case (in the least, in the latest version of LabVIEW).
Thank you.
Batya
Well someone using your library should not have to dig into your screws and do it all on his own. Instead your library must wrap that and hide disorders it altogether.
The cluster of error has been added when the dynamic path option has been added. It is not useful hide this error output, so it's always there. As well as the dynamic path, there was the improved error handling added the CLN. One of them is that the level of verification when calling function errors (exception handling) can be specified. I guess that some of these options may generate an error code instead of bring up a dialog box, as they did before and that the output of error code can be useful even in the case of static calls.
As to what you want to do, I would have long managed that with a DLL that has essentially the same functions as your other wrapper DLLs and an initiliasation function that returns a pointer to a structure of functional distribution based on the actual DLL you want to call. Quite like what an object-oriented function dispatch table is. Then, when your interface initilising you call initialize function and specify the device interface/type that you want to use and after that all other functions take a pointer extra function parameter expedition as the first parameter, in addition to the parameters of the real function. This dispatch function pointer would be just a pointer to a structure that contains the table of function for this interface pointers and the sake of LabVIEW would simply be an integer of size pointer.
The wrapper function then checks the pointer structure validity send feature and call the actual function with the remaining parameters. It is a C programming and may require a planning and desigining the different interfaces to facilitate this kind of technique of the expedition, but it will certainly pay to long-term and make your library even can be used in previous versions of LabVIEW, so that VB etc. without delicate dynamic loading in the level high, programming environment.
Rolf Kalbermatter
-
Out Look express
I compacted my messages. Messages from 17/01/2012 to 01/04/2012 are not in my Inbox and I didn't remove them where are?Two reasons the most common for what you describe is disruption of the compacting process, (never touch anything until it's finished), or bloated folders. More about that below.Why OE insists on compacting folders when I close it? :
http://www.insideoe.com/FAQs/why.htm#compact
Why mail disappears:
http://www.insideoe.com/problems/bugs.htm#mailgoneRecovery methods:If you are running XP/SP3, then you should have a backup of your dbx files in the Recycle Bin (or possibly the message store), copied as bak files.To restore a folder bak on the message store folder, first find the location of the message store.Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.In Windows XP, the .dbx files are by default marked as hidden. To view these files in the Solution Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder options | View.Close OE and in Windows Explorer, click on the dbx to the file missing or empty file, then drag it to the desktop. It can be deleted later once you have successfully restored the bak file. Minimize the message store.Open OE and, if the folder is missing, create a folder with the * exact * same name as the bak file you want to restore but without the .bak. For example: If the file is Saved.bak, the new folder should be named saved. Open the new folder, and then close OE. If the folder is there, but just empty, continue to the next step.First of all, check if there is a bak file already in the message. If there is, and you have removed the dbx file, go ahead and rename it in dbx.If it is not already in the message, open the trash and do a right-click on the file bak for the folder in question and click on restore. Open the message store up and replace the .bak by .dbx file extension. Close the message store and open OE. Messages must be in the folder.If messages are restored successfully, you can go ahead and delete the old dbx file that you moved to the desktop.
If you have not then bak copies of your dbx files in the Recycle Bin:DBXpress run in extract disc Mode is the best chance to recover messages:
http://www.oehelp.com/DBXpress/default.aspxAnd see:
http://www.oehelp.com/OETips.aspx#4A general warning to help avoid this in the future:Do not archive mail in default OE folders. They finally are damaged. Create your own folders defined by the user for mail storage and move your mail to them. Empty the deleted items folder regularly. Keep user created folders under 300 MB, and also empty as is possible to default folders.Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
http://www.oehelp.com/OETips.aspx#3And backup often.Outlook Express Quick Backup (OEQB Freeware)
http://www.oehelp.com/OEBackup/default.aspx -
Hi, try to send a 1 direct e-mail. they ask to add characters before sending to avoid threats, but do not understand what characters and where are they going? Thank you and God bless you
Hello
I'm sorry, but we cannot help with hotmail problems in these forums in response to vista
Please repost your question in hotmail in the hotmail link below forums
http://windowslivehelp.com/product.aspx?ProductID=1
ForumsConsult with Microsoft Certified Solutions____________________________________________Welcome to Windows Live Solution Center -
VCS - CPL to block call routing to and from the same area of neighbor
Hi all
Is there a CPL rule that can be written to block calls from a neighbouring area to the same area of neighbor?
We have problems with CUCM sent appeals to the our VCS VCS then routes the call return CUCM, causing thus "too many jumps."
In the example
MOVI user control VCS try to compose endpoint registered RTC CUCM, but incorrectly dials
Appeal does not have to search for the terms of local area
Call does not match search for VCS Expressway rules
Call corresponds to captures all of CUCM (. *) @domain.com
CUCM does not form DN or URI for the wrong phone number and the call is routed to the VCS control due to the SIP routing model of *. * on CUCM
We have to capture all CUCM at the end, since we offer PSTN, as well as our users and phones have the alphanumeric URIs assigned to the DNs for Jabber, etc.
I fear that he is not really an easy way to do it, I know because the call charged CPL first, CPL don't know what area it was intended for.
It's probably more easily accomomplished with a slight modification to your rules of research rather than spraying anthing "@domaine" everywhere - something like:
Anything incoming directly at @domaine in the nearby area of the local area (as is inside your organization, such as if the CUCM not found and sent it to the VCS he won't be on the CUCM, so must be local (or nonexistent) - and stop.
And the opposite of the above - route whatever it is for @domaine of the localZone.GetDaylightChanges (because it was not found locally) to stop and the CUCM neighbour-
And do similar for what is coming from other areas outside to route to wheverver that will be endpoints. In this way, your call should not be bouncing back between the CUCM and VCS and create the loop that you are currently experiencing.
Of course, if your environmetn is a little more complex than the simple CUCM and VCSes, this can be a bit oversimiplified, but could lead you in the right direction.
Another thing to consider too - if you put in your endpoints in a directory, users can use - that will help you to prevent wrong type stuff :)
Wayne
--
Remember the frequency responses and mark your question as answered as appropriate. -
Can I call a function with the argument % ROWTYPE directly from SQL?
I have the following function in a 10g DB:
FUNCTION to CREATE or REPLACE f_is_eligible2 (in_dm_row IN amplify_dm % ROWTYPE)
RETURN NUMBER
IS
....
I know that I can call this function to another function from pl/sql, but I wonder if I can call this function directly from an SQL statement, something like this:
SELECT f_is_eligible2 (dm.*)
Of amplify_dm dm
or
SELECT f_is_eligible2 (dm % rowtype)
Of amplify_dm dm
None of those who have worked so I think it is not possible, but I thought I'd ask anyway.
Thanks in advance!You are correct, it is not possible.
SY.
Maybe you are looking for
-
When I type something in it does not search.
When I try to access a site (e.g. www. ( whatever.com) and click search, nothing happens. This problem happened after I had to get rid of a search engine of another installed program. (I had to update firefox) what gives?
-
Firefox hangs and then greys out
After a short period of normal use, Firefox hangs and when I try to click on a new page of image greys out partially. On the top of my screen it says that Firefox is not responding. My only course of action is close the program down. When I do a smal
-
HP Photosmart B110 ask password wireless whenever it starts.
-
How can I stop the process using the trigger Disqualification?
How can I stop and start the process using triggers in Disqualification? While planning a job, I can not able to see the folder of trigger / trigger name in the tool palette? What kind of file should be placed in the Triggers folder. If you know som
-
My dv7-7121nr has a place for 2 hard drives internally? (ssd)
The subject says. I am wanting to add an SSD for fast loading games and windows itself, but I don't know that I want to sacrifice the size of the HARD disk here already. I doubt it has 2 slots, but I thought it would be good to ask.