Continuous hand tool supported.

Similar Questions

• Hand tool problem

  Hi all

  I am writing because I have a problem with the hand tool on a pdf file I created from photos taken off the coast of a powerpoint presentation for a university course.

  On the newly created pdf file, the hand tool would not work to read the entire document. May not edit the page. The only way that I can pass the pages to my pdf document should go to the vertical scroll bar (on the left) and change the pages from there.

  This isn't something that I can not live, but it is rather annoying.

  Could someone tell me please what is the problem with the hand tool and how to fix it?

  If you are curious as to why should I do this instead of simply ask the powerpoint files:

  The Professor of my course of water at my local University gives its course by explaining his powerpoint presentations. It is quite a problem because it does not have enough time to write everything by hand (in the book). So, I asked his permission to take photos of his presentations. He told me that he would allow me to do, but he would not give his own version files to students. Some university professors have strange attitudes support.

  As you can see I have no choice but to be expected in a camera, whenever I go to this class.

  To create my pdfs, all I do is select all the images; Right click and select "combine the files supported in acrobat."

  The created pdf files come out very well. However, the hand tool would not work to navigate the documents together. It only works within a single page, but do not to move to another page.

  Could someone tell me what's not here?

  Help, please!

  Thank you for taking the time to review my case.

  My guess is that you're document is in page unique, non-continuous mode.

  Make sure that the button on the left of the two in the box highlighted here is checked.  The hand tool then you will navigate between pages:

  

  Let us know!

  -David

• Space bar to hand tool is no longer works?

  I did no update AFAIK, but on opening Illustrator today the SPACEBAR to move the page (hand tool) no longer works, and frustrating, it must use the shortcut (H) instead.  Is this an update of Adobe?  Someone at - it's not how to get it back to normal?

  With the help of Abode CC

  Thank you!

  Adam,

  If the things that must operate simply refuse of (exhaustion all the possibilities (and carefully making sure you (all) make the necessary things)), you can try the list below.

  Sometimes, (some) things may fail or stop working for no apparent reason. When (other) possible reasons/remedies do not work, it is perhaps a kind corruption (temporary or permanent), or even preference settings which disturbs, which can be cured with something on the following list put in place in order to provide a catch-all solution for otherwise intractable cases. It starts with a few easy suggestions and safe) 1 and 2) for cases less serious and goes two ways 3) and 4) to reset the default preferences (easily but irreversibly and more laboriously but more completely and also reversible), then follows a list 5) various other possibilities, and it ends with a complete reinstallation 6). If no other suggestion doesn't work, or if no other suggestion appears, you can start on the list and decide how to go or who can apply.

  The following is a general list of things, try when

  (A) the question is not in a specific file,

  (B) you have a printer installed, connected and turned on if it's a physical printer (you can use Adobe PDF/Acrobat Distiller as a printer by default without the need to have a printer on, of course you will need to specify when you really need print on paper), and

  (C) It is not caused by problems with opening a file from external media (see below).

  You tried/made some of them already; 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically may be corrupted/inconvenient preferences); ((5) is a list in itself and 6) is the last resort.

  If possible / there is, you must record a current work first, of course.

  (1) close Illy and open again.

  (2) restart the computer (you can make up at least 5 times);

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

  4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible), for CS3 - CC you can find the file here:

  https://helpx.Adobe.com/Illustrator/KB/preference-file-location-Illustrator.html

  5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

  More serious still (it can be serious because you may need to restore the plugins and whatnot if you've customized things), you can:

  6 (A) uninstall (check the box to delete the preferences, if any), B) run the cleanup tool (if you have CS3/CS4/CS5/CS6/CC) and C) reinstall. You can try without step B), but sometimes it is necessary, because otherwise things can persist.

  To uninstall:

  https://www.Adobe.com/cfusion/search/index.cfm?loc=en_US&term=uninstall&cat=support&produc t = illustrator & auto = 1

  Cleaning tool:

  http://www.Adobe.com/support/contact/cscleanertool.html

• Stuck in CC 2014 hand tool

  On both of my Mac, both under the latest versions of the Mavericks and Photoshop CC 2014, the hand guard tool stuck after use. It is getting worse. I appear to switch to another tool based on the toolbar, but it does not behave like the tool. Just the hand tool.

  
  

  I have the following without success:

  • Activating/Deactivating the hand with the H hotkey tool, space bar and clicking.
  • Reset the preferences.
  • Reinstall Photoshop and same Mavericks.
  • Switch to a different keyboard.

  I restart Photoshop. Sometimes it works, but it might take three or four restarts. Sometimes I have to restart my Mac.

  A Mac has a Wacom Tablet; We do not. The file size has no importance.

  What Miss me and what I can do? This is a major bug. I had the same issue in the CC, but only rarely. I have never seen this before CC. I see in the forum that others have posted about this on the different versions. There must be a way to get Adobe to watch this and other positions.

  Thank you.

  If the problem is not corrected by restarting Photoshop and reset preferences - then the problem exists outside of Photoshop.

  It could be a bad keyboard (stuck key), a utility of the OS (such as support services), a utility program, a bug in a driver (as a driver of the Tablet), malware or even a bug in a third party plugin (no longer).

  Other users will not see this. It is not likely to have a bug in Photoshop.

  Previous posters to similar problems have found the cause on their system: bad keyboards, MacOS support services, bad tools, bad drivers, etc.

• Curriculum vitae of hand, tool and zoom

  I apologize for this easy research question, but neither documentation nor my own tests seem to indicate a clear answer.

  I have a graph of waveform and I use the zoom and hand on the graphic palette tool.

  1. after the application of the hand tool, how can I resume to the original curve?

  2. I have to zoom in a part of the graph several times consecutively, say twice. After the secodn zoom, I would take the result of the first zoom.
  The way the features of zoom-in and zoom-out work generally.

  In the graphic palette, the icon at bottom left of the zoom features, simply offer the opportunity to return to the initial version of the chart.

  I couldn't find a way to get a zoom-out extra as described above?

  Y at - it all?

  Thank you!

  MG.

  (1) use the Zoom all

  (2) you must programmatically.  When you zoom in, store the scale data X and Y (max and min).  You can make a button to return to the previous zoom then assigning data to scale with the values that you stored.

• Hand tool moves the entire screen instead of the view

  I use photoshop for a long time and I started to use after effects last month and 'I KNOW' how hand tool works, but recently I tried to mess with some settings of sequels and after that whenever I try to use the hand tool to change my point of view (for example after I Zoom) it moves all over the screen in the composition tab. To help you better understand what I'm saying, think of photoshop. When you are zoomed out in photoshop, hand tool does not work. because you're already all see. but now in sequels even when I zoomed out I can move the screen tab composition and it is not locked and it is very annoying. And I'm not talking about move tabs. I know how it works. My composition label is locked in place, but the screen/screens in this tab moves with hand tool.

  (Sorry if I made any mistakes. My English sucks)

  I KNOW"how the hand tool works, but recently I tried to mess with some settings of sequels and after that whenever I try to use the hand tool to change my point of view (for example after I Zoom) it moves all over the screen in the composition tab.

  AE hand tool and hand of the Ps tool are not exactly the same.

  PS the editing table (grey area outside the canvas) is irrelevant, because you would normally place of items outside the canvas - it is probably why you are locked in the content inside your canvas, when you are zoomed out.

  In Ae the editing table can be very relevant because the image is more than a window through which you see your trained together and animated elements. steal things from the outside, you can have cameras and outside lights and often end up making one Setup and use with the grey mount table more then the dimensions small composition. These layers backstage will be displayed as rectangular outlines. Suppose you've got some getting used to. Perhaps if you gave a specific example of a workflow where you are annoyed by this behavior and we can take a closer look.

  the image can move from time to time, but you can use the shortcuts to place it in the frame. Shift + / is my favorite.

  

• The selection (rather than the hand tool) by default in Adobe Reader ms tool

  Even if I click on the selection tool, everytime I open Adobe Reader DC, he returned to the hand tool. When I view PDF files in Firefox and I switch to a different tab that has the pdf, the cursor becomes a hand flashing tool. I was once able work around this problem and make the default value of the selection tool, but I can't remember how I did it. Does anyone have a solution for this problem? If I make the hand tool Selection text and images, it always makes the cursor becomes a hand tool flashing when I'm in Firefox and a different tab of one containing the pdf file. I use Win 10. It is very annoying because I often use the cursor to select and copy text and use the arrow keys to scroll through, making it largely redundant hand tool. If there is a solution to this problem, I would be very happy.

  Hi donaldc44485744,

  Please try to use the Download Adobe Reader and Acrobat cleaning - Adobe Labs tool cleaning tool, and then restart your system.

  Then try to install the latest version of Adobe Acrobat Reader DC from here: Adobe - Adobe Acrobat Reader DC Distribution

  Let us know if you still experience the problem.

  Kind regards

  Meenakshi

• How can I configure the "hand-selection-Tool" (hand-tool) as a default setting in Acrobat Reader ms?

  How can I configure the "hand-selection-Tool" (hand-tool) as a default setting in Acrobat Reader ms? I'm tired of change each time I open a pdf file...

  Hi M S.

  Could you please let us know the version of the OS on your system?

  Also please refer to this article:hand lack of tool (Installation & updates)

  Let us know if this helps,

  Concerning

  Sarojini

• Move the tool and the hand tool works not so I can't move my images.

  I have the latest version of photoshop, and I can't move my images with the tool move or the hand tool. Make sure the level that I want to spend the move tool does nothing and it rises, as if I'm trying to select part of the image that is similar to the use of the Selection tool (as shown in the picture attatched) but then nothing happens. The only way I'm able to move my image now is if I use the transform tool and it's really frustrating and time consuming way to do. I restarted photoshop, my computer laptop, insured without other applications/software are running and still nothing works. I have also tried resetting tools built-in, but to no avail. Any suggestions on how I could fix that would be great!

  

  Hi Serenah: This isn't the tool move, this is the path Selection tool. 2015 CC took a major interface update! The move tool is now arrow 4 sides and just to keep things interesting, tool display changes with the workspace. To reset the tools, choose window > Workspace > Essentials reset. This blog will help you understand what is happening: https://www.rockymountaintraining.com/adobe-photoshop-cant-find-tool/ .

  ~ Barb

  

• Hand tool will not disseminate billing.

  I have a problem with! Photoshop and! InDesign - frequently when I select an object to move, the cursor will not release the question.  Then I can move the mouse in any direction, and the object remains attached to the cursor. I then have to click with the mouse down a second time to release the item.  As you can imagine, it's incredibly frustrating when you try to position elements accurately and adds a huge amount of time at work.

  I find also quite often that my hand tool gets stuck when dragging a page and will not be shared - I have to type the SPACEBAR several times so he could release.

  In my attempts to try to solve this problem, I did the following:

  • I tried my wacom (and driver) Mac
  • I deleted my preferences by pressing Shift + Option + command-control (and by pressing 'Yes' when asked if I want to delete the preferences)
  • I tried to unplug all USB devices
  • I also tried to disable the Bluetooth and just using the Wacom
  • I tried other applications to quit smoking
  • I tried different keyboards
  • I tried to remove the third-party plugin only I use (FontExplorer)
  • I even restored my backup time machine on another Mac!  (now on an iMac nine - end 2015)

  .. .and yet the problem persists.

  I saw that others have complained on this topic, or at least the hand tool stuck when dragging even when, but the best fix that seem to come with, is t press the SPACEBAR several times. I'm afraid I don't really see this as a solution, especially when you have to do whenever you want to move something on the page.

  If someone has any ideas why this happens, I'll be very grateful.

  Thank you very much for your time
  

  I would try to plugins and other third party software (a not just in the Adobe - various Chrome plugins programs are known to cause havoc in InDesign, as well as things like WebRoot and some banking security software). Have you tried to start with the SHIFT key down to turn startups to see if that makes a difference?

• How to get rid of the hand tool?

  I have Indesign cs6 and can not get rid of the hand tool. I keep trying to select other tools, and there's just at hand.

  The SPACEBAR on your keyboard is blocked, most likely. The space key on your keyboard gives you temporary access to the hand tool.

• After update to the last version of the space bar no longer give me hand tool / to navigate around my image, everyone knows this? Even for the button on my wacom pen...

  After update to the last version of the space bar no longer give me hand tool / to navigate around my image, everyone knows this? Even for the button on my wacom pen...

  ... computer update restarted... everything seems to work again.

• Hand tool remains active

  drawing with the brush

  Select the hand tool to move the view

  hand tool slider stays and

  the only opening is movement of hand tool

  Other tools may show as SELECTED in the box tools

  but the hand tool is the cursor and the only thin that works.

  Mac OS X El Capitan version 10.11.2
  13 inches. MacBook Pro mid-2009
  Processor: 2.53 GHz Intel Core 2 Duo
  Memory: 4 GB 1067 MHz DDR3
  Graphics card: Nvidia GeForce 9400 M 256 MB

  Photoshop CC 2015.1.1
  2015'209.r.327 x 64

  What happened several times. (10 - 12 times?)
  Thus, it is not an isolated event.

  I drew with the Brush tool.
  Then I switch to the hand tool to move.
  When I switch back to the Brush tool the tool remains active hand.
  Hand tool indicates that the cursor operation.
  In the toolbar, the Brush tool shows that the selected tool.

  If I try to do a job, the only thing that happens
  moves the sight of the hand tool.

  I have RESET the hand tool.
  I closed the file and restart the software.
  I did all that and restarted the computer.
  The hand tool is the only cursor operation.

  Other tools may show as selected
  but they do NOT work.

  Then as mysteriously as it happened,
  the application resumes its normal operation.
  And I chalked it up to the previous two or three hours of frustration as lost.

  This same thing happened before with the DISPLAY ROTATION tool.
  Suddenly the once used HAND TOOL, remains in operation.
  No other selection tool doesn't work.

  Hi johndeckert,

  Please save your Photoshop settings (actions, Presets) following How to backup Photoshop settings like a Pro: the Pro Photo Show

  Then reset the Photoshop preferences

  Photoshop > preferences > General >Reset preferences on Quit

  

  Let us know if this helps

  Kind regards

  ~ Assani

• Why the space bar does not work as a hand tool? In any case

  Space bar stopped working as a hand tool. Photoshop 2015.1

  Who had the same problem?

  It's the latest Mac OS X

  I use wacom Intuos

  But I guess I have it solved. The browser had a reason. I just closed Safari and space bar started working

• Why the hand tool in the top toolbar in the tutorial movies, but still shows, there's no way to put it there?

  Why the hand tool in the top toolbar in the tutorial movies, but still shows, there's no way to put it there?

  Hi JonRVan,

  In the latest version of Acrobat Reader DC you can anchor the hand tool in the upper part.

  Please make sure that your Acrobat Reader DC is updated (check the update under the Help menu).

  Then click on the button at the end of the floating toolbar.

  

  Kind regards
  Nicos