Control charts missing Center

Similar Questions

• Control chart SPC not showing CL UCL or LCL

  Hi people,

  I have a spc control chart in my application.  However for some reason any of the UCL, CL and LCL are not displayed on my chart.

  A brief review of the facts:

  This is an application for people who enter the measurement data in several numberboxes the average that goes on the chart.  These figures vary generally from 32.0 to 28.0

  UCL is 30.6 the CL at 30 and LCL 29.4 However none of these values are showing on the chart.

  Someone used this command and find out why, I'm having a problem here?

  Rik

  Hey Rik,

  I just had a quick play with this contorl and have had no problem to show the limits.

  

  I have attached the VI below, have a play and see if it works.

  John

• My volume icon and control is missing

  My volume icon and control is missing and I also think that the program is now defunct.  A spokesman for AOL of sees has accessed our computer to 'clean up' to make it work better and I think that he has removed my volume and its program.  When I tried to add the volume on my computer icon, he told me I do not have the program and install it.  When I went to add the program by following the instructions, it took me to Microsoft, but there is no program called "volume and noise."  In reading other posts, that it is said to right click on Start/Properties/Notification...but, I don't have the option "notification" under properties.  What should I do?

  My volume icon and control is missing and I think also the program is now defunct.  A spokesman for AOL of sees has accessed our computer to 'clean up' to run the best and I think that he has removed my volume and its program.  When I tried to add the volume on my computer icon, he told me I do not have the program and install it.  When I went to add the program by following the instructions, it took me to Microsoft, but there is no program called "volume and noise."  In reading the other messages he said right-click on Start/Properties/Notification... .but I don't have the option "notification" under properties.  What should I do?

  Hello

  Notification options are only available for Windows Vista and higher. The Control of the Volume icon may appear from the Control Panel.

  You said that the Spokesman of AOL could have removed the Control of Volume, please make sure that the following files exist on your system to see if the Setting of the Volume has been either deleted or not
  %SystemRoot%\system32\sndvol32.exe
  
  
  If you do not want to enable the display of the Control of the Volume icon, please try the following
  [1] method: Using the control panel to change the settings for sounds and Audio devices
  • On the start menu, select Control Panel.
  • Double-click sounds and Audio devices.
  • On the general tab, check Place volume icon in the taskbar
  • Click OK

  Thank you
  Have a nice day :)

• The volume control is missing

  Original title - volume control

  my volume control is missing from my toolbar, and I can't find the volume on my laptop

  Hi MHartley

  
  I suggest you refer to the below link and display all icons in the notification area.

  http://Windows.Microsoft.com/en-us/Windows-Vista/show-all-icons-in-the-notification-area-system-tray

   

  Also you can make sure that the volume icon is enabled in the notification area-
  a. open the taskbar and Start Menu properties by clicking the Start button, clicking Control Panel, appearance and personalization, then clicking on the taskbar and Start Menu.

  b. click on the Area of Notification tab, to see icons, click Customize, click the icon (volume), you want to display, and then select the drop down options accordingly.
  c. click applyand then click OK.

   

  I hope this helps.

• MMS 5650 missing Center Fix

  Hello world!

  I read never really many on the Dell forums, but I want to share something with everyone in hopes of helping someone, I discovered.

  Recently, my neighbor, who I do a good bit of work at the computer, went to a yard sale and bought a system MMS 5650. She bought thinking it was a computer! Again, however, I was working on his computer that night and told him it was not a computer, but it is rather a speaker system. She said that she couldn't use it, so she gave it to me.

  So I get home and I'm looking on it, to realize that missing a center speaker. After some research, I learned that the center speaker feeds the whole system with its switch on / off. However, being as curious as I am, I opened the subwoofer bass/receiver to do tests. After a while of wire tracing, I decided to try jumpers on some pins. Hey, no center speaker, so if it is fried, it fried.

  I realized that the on / off switch circuit had to do with the DB9 connector on the back of the unit. I spent some time to place a wire on several pins with no luck. Then, suddenly, the whole system came to life only to falter to silence, literally. This brings to mind a potentiometer, or wheel to control volume, must be on the center speaker.

  This means that there must be another set of pins that needs a rider. Then, I tested a bit more and found that the PIN was right next to the first two. It is such an easy solution!

  Here's how to fix it: put a thread on pins 2 and 7 and another wire on pins 3 and 8. This creates the circuit and the powers on the system. Optional: I did my riders in an old series extension cable to tinker more easily.

  He seems to pin 6 has some amount of tension to this topic, but I have no idea how. This leaves 4 that pins open, right? Fix. One thing to note is that the grounding is done through the screws on the original DB9 plug. So, in theory, the other 2 pairs of pins to go to two separate speakers, i.e. inside the center speaker!

  It shouldn't be difficult to find what areas focus the audio, and then I'm going to attach a headphone jack of 3.5 mm on each that will then be linked to a set of speakers left from an old computer. You could exchange the plug for headphones with RCA plugs depending on your situation.

  This concludes how to fix your MMS 5650 home theatre system. Feel free to ask questions and make suggestions. The difficulty of the ultimate amateur, go to radioshack and get a male DB9. Weld the two pins necessary sets and fix your catch in a pretty box also available here. Nice and clean!

  Not bad for an amateur teen, huh?

  Hello

  Not bad, but I have a different pin

  I was looking for the same solution for my Center speaker is also absent.

  As I found nothing on the internet, so I took the bass part, a little behind all this engineering.

  Here's what it looks like on my end of the world:

  pins 1, 2 are shorted and the center speaker on (+)

  PIN 5, 9 are also shorted and also for the center speaker (-) (I'm not sure of the +/-thing)

  PIN 4, 6 connect these (power)

  pin 3 connect a potentiometer (out / wiper)

  PIN 7 potentiometer (Terminal 1)

  PIN 8 potentiometer (terminal 2)

  When I tried with a 100K potentiometer, it was too big, could not turn down the volume. It is probably a 10K, because the system has its own volume control ic.

  So here it is, hope I helped for all the jokers (like me) who doesn't have enough money to buy a new system.

  Peace

  Jim the HUN :D

• Tab control: chart automatically resets when I switch between tabs

  Hello world

  I'm having a problem with a user interface. : mansad:

  I use a tab with two tabs control to switch between the two graphs. A graph shows data from a production machine (tab 1), the other a data from a measuring probe (table 2). Now, when I switch from tab to tab 2 1 and return, graphic of tab 1 is empty and begins to show the data from the moment of return too tab 1. Tab 2 data are not reset, but are constantly updated, even when the 1 tab is open. I'd like to tab 1 to behave like tab 2. It must be constantly updated even when tab 2 is opened and the data should not be reset after between tabs.

  Making machine is connected via a server (Data tab 1, Figure 1), the data from the probe are written a queue and comes from (Data tab 2, Figure 2). It's all part of the main VI. This part is shown in Picture 3. Here, historical data are reset to zero when the program ends. But I can't understand why it does not work as I want.

  Can anyone help?

  Thank you!

  

  OK, there are very strange things happening here, in addition to the problem you are having (which, I admit, I don't see yet why you have a problem).

  First of all, I've never met such a structure of strange and deeply nested directory for LabVIEW code as what you posted: Users\AB\BC\CD\DE\EF\FG\GH\HI\IJ\.  Why in the world you have an empty stack of sense files / directories to go?  Very, very strange.

  You view multiple charts using waveform graphs.  Do you, indeed, assemble an array of waveforms to display on the chart, but the waveform consists of a single point, 'built' in a table, with a current timestamp as t0.  Instead of going to all these efforts, you can simply group your data points in a Cluster and show that.  Your X axis will not display "Time now", but if you know the sampling frequency, you can adjust the X scale so it displays 'Time' in practical (such as seconds) since the beginning of the sampling units.  Note that you already have one such cluster (at least in the reading process data - the data output Process value - which can be connected directly on the diagram of fluid bed without the need of the Signalverlaufsdiagramm).  It could, in fact, "fix" your problem (but I'll let you test this).  You will need to do a similar Cluster Bundle in sight Parsum data and output the cluster instead of the table in order to test this idea.

  Bob Schor

• I have a few qeustions about IMAQ images and control charts

  First qeustion is: library in the IMAQ, you have the image control how can I possibly call the "Zoom to adjust" function thanks to a button, rather than with the right click because I tried it and I can't find anywhere so that claire KING simply is sided with the nodes to invoke.

  Second qeustion is: when you have a chart, how can you control the X value that you look with a numeric value that allows you to adjust the visibility graphic on some value x, for example, I make a numeric with a value of "10", I'll have the chart to access the value '10' so is it possible anyway I tried to work with some nodes of property but I get a little tangled in the web page of possibilities.

  Third Qeustion is: it is a qeustion minor but I would ask anyway why is that when you change the value of a button you can change only once in the structure, and not twice because I would like to have a button when this button is true it affects the other 2 buttons true and when it is false it affects other 2 buttons false... I can only get the effect to 'true' or 'false '. To complicate things even more if I still want to be able to use the 2 buttons that are defined differently by the first button, it's just if I can automatically start and stop the two buttons at the same time.

  and while I'm I also have a fourth qeustion: is there some way you can use the line tool several times in the section IMAQ image because the tool palette allows only 1 line.

  This VI use you to lines... is it "IMAQ Overlay line?

  Try the attached code...!

  And if it is a solution to your fourth question, then it seems that all your queries are resolved...

• Control chart and mixed signals tab crashed for LabView 2009

  I find a serious problem by using the chart of mixed signals with tab control. Two examples and detailed drscription are attached. In TestMix.vi there is mixed, graphics and additional code to display the data. Normal execution of the program. I add the tab control and move the graph mixed signal in Page 2 (see TestMix2.vi). After registration as TestMix2, close the vi and oppening is façade of LabView frozen after touching on page 2 of the tab control.

  Does anyone have the solution for this case?

  Best regards!

  In his stavljanjem digitalnog dijela na kraj grafa sam otkrio kao slucajnost, ali only Monte puku is tako I dolazi zaobilaznog rijesenja.

  Kada dobije informaciju od kolega bi bug mogao biti rijesen obavijestiti cu spomenuti kada go! Moze biti u Drugom.mp3 od nadolazecih patchova ili u sljedecoj verziji LabView eventualno - a.

  Srdacan pozdrav

  Franjo Tonkovic

• Resize the Checkbox control to the Center

  I am trying to create a typedef of checkbox corresponding to a checkbox system at the center of a resizable rectangle. At the moment I have a flat box aligned on the box, but when I resize the control, the box remains in the same place. How can I get the checkbox to automatically align the centre when the control is resized? Thanks for the help!

  

  I know that this probably isn't the right way to do it, but I created an array of clusters, in which I put in place a couple flat Boolean as left and top of the page buffer, then the checkbox. With the help of a simple VI, it calculates the correct size of the two buffers to center the checkbox in the space.

  So the end result of an element of the table looks like this (with everything except the transparent box).

  

• Control chart cursor with keyboard

  Is there a way to move the cursor with the keyboard arrowsbuilt in graphics? If this isn't the case, I think it would be simple to do with the dynamic event record. If the user clicks on the graph, save the events during the arrows button and use the down arrows to move the cursor some default step size. How can only problem, I determine when the user has clicked everywhere except on the graph (graph lost focus) to unregister the key down events? The only way I can think of is to use a component-based mouse event and calculate if the mouse coordinates are on the chart control, and if they are, then don't unsubscribe the events down button again.

  Hello

  I did small example to move the cursor by using the keyboard.

  What I've done is, you press F10 to access the keyboard mode and move the slider or just as you mentioned, click on the graph, it will start

  move the cursor with the keys and when you click anywhere else in the public Service, it will stop that.

  I would like to know if that's what you want.

• Control (trigger) missing display on monitor... Model 70 d fast

  I had my 70 d for about 6 months, with no problems... until yesterday, when I pushed the shutter button halfway, the LCD displays the 'Quick order' menu for 3-4 seconds... This feature is missing...  I can press 'Q', & get the same... but it's embarrassing... I can toggle this display "ON" at all times, through the "info" button but I don't want that...  I even restored factory settings, after putting in a new battery...  I can't recover this feature... ??

  Hello Robiss,

  According to the information you provided, it can be better than our service center to evaluate your camera.

  You can configure the service through our web site here.

• parental control is missing some info.

  As one administrator with two workstations, I wouldn't be able to change the time available on the standard desktop of the standard desktop, which I was surprised to find out that I could do.  I am the admin of my office, and it is the standard user.

  What Miss me?  Desktop of my son has no password, but deadlines have worked.  I saw that he was on the computer after hours last night and then discovered that he / I could change the time from his office through parental controls.

  Thank you!

  http://www.bleepingcomputer.com/tutorials/tutorial139.html

  Read the tutorial above.

  It is a very good guide on how to set up Parental controls.

  See you soon.

  Mick Murphy - Microsoft partner

• Basic PC minimize the screen controls are missing

  Controls on all PC programs for the reduction, closure and restoration of the screen are missing in my Lightroom 5.7.1 program.  This happened only yesterday, but I don't know if I did something to do.   I am referring to the controls in the upper-right corner for all PC programs.  X to stop, "-" to reduce and the square for a custom size or medium sized box.   They still exist in other programs.  I don't see anything different in Lightroom except this basic control.   I have a PC that is running an Intel processor.   I use Lightroom for years and I've installed this version when it was released last fall.   Top left, I still see Lightroom like file, edit, Photo library, controls etc.  The result is that I can stop only Lightroom by clicking file and then clicking Exit.    How do I bring these controls in the view?   It is only in Lightroom.  If the images cut and paste work, these are the basic commands for that I'm looking:

  

  That's what I see in Lightroom

  

  Press SHIFT + F or twice.

• Video control Bar missing

  With the updated content viewer, we noticed that the video control bar is absent on embedded videos. In the past, we could see how long was the video and go to different places in the video, but this function does not exist today. Is this something that specifically changed or was it an oversight? We prefer to give our readers the opportunity to move around the video and see how long the video is. Thank you!

  Video missing "scrubber" is a bug in iOS8 - we reported to Apple.  Can you confirm your iOS8 on and seeing this?

• Table of control point missing Golden gate

  Hello gurus,
  
  I'm trying to implement direct replication with Golden Gate, but I can't create the control point table.
  
  
  GGSCI (26) > ADD CHECKPOINTTABLE
  ERROR: Missing checkpoint table specification.
  
  GGSCI (q) 27 > ADD REPLICAT rep1, EXTTRAIL/t01/software/gg2/dirdat/rt
  ERROR: No control points table specified to add REPLICAT.
  
  
  GGSCI (28) > ADD CHECKPOINTTABLE
  ERROR: Missing checkpoint table specification.
  
  GGSCI (qcdvap1031.gnet.qc.bell.ca) 29 > edit. / GLOBALS
  ERROR: Invalid command.
  
  GGSCI (30) > edit params. / GLOBALS
  GGSCHEMA GGS_OWNER
  CHECKPOINTTABLE GGS_OWNER. CHKPTAB
  
  
  GGSCI (q) 31 > add CHECKPOINTTABLE GGS_OWNER. CHKPTAB
  
  Managed to create the table GGS_OWNER of control point. CHKPTAB.
  
  GGSCI (32) > ADD REPLICAT rep1, EXTTRAIL/t01/software/gg2/dirdat/rt
  ERROR: No control points table specified to add REPLICAT.
  
  Don't know what I'm missing here, can someone please help?
  
  Thank you very much

  Specify the control point table in the global file is every time that you restart your replica he get the overall point check table form file.
  But while adding you must always specify tablename.

  hope that make sense