Control keys not working not

Similar Questions

• Pavillion R033TX: Brightness control keys not working not

  After the installation of the new OS Windows7 ultimate.
  Brightness control keys don't work from my laptop.

  volume control on keyboard keys also does not work.
  My laptop model is HP R033TX

  I search drivers but not find the suitable and functional driver for my laptop.

  Please help solve this problem.

  In order to solve the problem, you will need to re - install the first chipset driver and then reinstall the graphics driver on the HP website

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you
  K N R K
  Although I am an employee of HP, I speak for myself and not for HP

• Laptop HP 15-r203tx: brightness control keys not working not

  I can't control my screen brightness using the f2 and f3 keys. Whenever I try it shows not available. I checked in Device Manager if there is any outdated display driver and found none.how to solve this problem?

  Yes please re - install the drivers in the same order as advised. I would like to know how it goes!

  Kind regards
  KNRK
  I work for HP

• How to get volume control keys to work?

  How to work the volume keys on the keyboard?

  Hi NickHolt,

  You can check the following link and try to download the latest drivers for the keyboard.

  http://www.Microsoft.com/hardware/en-us/downloads

  Hope this information is useful.

• Tab and control keys do not work in Firefox (they work in other browsers) AND I went to a new keyboard.

  Tab and control keys do not work the browser Firefox (my browser is up-to-date). The buttons work in IE and Chrome, however, until I realized that, I even changed my keyboard for a brand new, hoping that would solve the problem.

  Hello arlusk, the problem is probably an extension that is not working properly. Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  Once you get the pop-up, simply select "" boot mode safe. "

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.

• Brightness control keys works do not (f2 + f3)

  After the installation of the new OS Windows7 ultimate.
  Brightness control keys don't work from my laptop.
  My laptop model is HP 14-D010tu
  
  I search drivers but not find the suitable and functional driver for my laptop.
  
  I have the software driver hotkey but this app installing do not... .plz help solve this problem.

  Hello:

  Most likely, you will need to install the chipset and graphics driver for your laptop model.

  See if they work...

  Chip set.  First, install and restart.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=20775 & lang = eng

  Graphics card: Installation and reboot.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=24392

• Control keys works do not, Win8 to Win7 downgrade. HP envy j011dx

  I have a HP Envy j011dx provided with Edition (64b9t) to the home page of Windows 8. I put in an SSD and improved RAM and installed Win 7 Pro(64bit). Everything is working great except control keys do not work.  When I hit the left ctrl key, I get [9 - and CTRL right, I get, l;]
  I have searched and tried a few different drivers looked at messages on the demotion to 7 and have not seen anything on this issue. I ran all the updates of windows and tried several different drivers. I put the old HD with W8, and it works if it is not a hardware problem. I looked at the origin of this post before doing the downgrade and it gave me the confidence to move forward with implementing Win7 on. I have until Friday to take this back to the store if I can't make it work. Any help would be appreciated. I also checked the region/language settings.

  I discovered what it was! Hallelujah! Good so I uninstalled and reinstalled Win7 Pro like 8 times. The driver IDT High - Definition (HD) is that he was causing.

  Finally, I noticed that when I hit the left CTRL mute volume was turn. Then when I hit the button Mute ctrl will work correctly. Mute on this subject would not work. Mute off it would work. I unsintalld the driver and re-installed several times to ensure that it is definitley the origin of the problem. Keys mute and volume were workign regardless if the driver has been installed. I was making reference to article http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/Downgrade-HP-ENVY-15-j011dx-to-windows-7-need-help-finding/td-p/3768928 to get the rest of the drivers. WEIRD question but it is the IDT Audio, 1.0.6491.0 Version 6.10.6491 Rev: A SoftPaqNumber: SP4958 that was originally there. It's SP4958.exe. Whooo! It was a guy. I'm so happy that I found it. I like really a few Windows 7. Not looking navigation on Windows 8 and 8.1 at all!

• N8M19PA #ACJ: brightness control keys do not work

  I had my hp laptop a week back.at first keys work alternately means once it works and another time keys are not working.when keys do not work, I used to restart my system while they working.but now, brightness control keys do not completely work. When I used to turn it back on as they are not working.what do I do now? He made me suffer a lot and the strain in my eyes

  aravindsatya

  Uninstall the driver of HP wireless button and restart

  Install the driver

  http://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71829.exe

  your system for other drivers page

• ENVY 15 t-ae000: (F2 and F3) brightness control keys do not work after update bios and Windows 10 update

  After that I upgraded to the latest version of the BIOS and upgraded to Windows 10, brightness controls no londer work.

  Would appreciate any help.  Thank you

  Hello

  If your laptop uses Nvidia Optimus (Intel + Nvidia GPU), try to download and reinstall the Intel HD graphics driver on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp74501-75000/sp74569.exe

  When reinstalling, restart the laptop.

  Kind regards

  DP - K

• Equium M70-PSM77: multimedia keys not working not

  How can I get my media keys to start working. When I press on each of the six buttons on the right side of the laptop under the power button, they are not a thing. What could be wrong.

  I have the series Equium M70-PSM77. Please help find me a solution to my problem.

  Hello

  What could be wrong? Which means buddy whether keys are not configured correctly or the Toshiba own software controls does not work!

  Visit the page of European driver of Toshiba and reinstall the controls and driver controls.

  Usually, this should help!

• Special function keys not working not not on Satellite C50 - Windows 8.1

  Hello

  Please could someone help me.

  I have a Toshiba Satellite C50-A0393, I received a few months ago with already installed Windows 8.1 (64-bit). Today, I got a message saying that I had to watch the PC health, a blue message Toshiba about that the access agreement and I noticed that there are three updates that needed to be done, the only one, I remember being the Toshiba Video Player. I think that another had to do with the light of the charger?
  I do not know.

  But once I rebooted my laptop after the update I noticed that the special function keys were not working (i.e. the volume, mute, pause and play, etc..). Then, I went to the Toshiba Office help and in Control Panel and select the keyboard tab. I did as the setting for the special function mode has been selected.

  Now, when this setting is in place, some keys work but for F3, F5, F6, etc. and when I want to use special features that the volume up and down work when pressing 'Fn', but the special function mode is still selected? These two work only, not the mute or the flightmode or bluetooth, which was operating normally before the updates.

  I googled but can't find something specific to 8.1, or not covered do not upgrade to 8.1. I can't find the flashcard utility and do not want to try something where I don't know what I'm doing. How can I get these special function keys working again normally? Sorry for the long message, but I wanted to give as much information as possible.

  Thank you very much

  Melanie

  Hello

  It seems strange to me that an update of Toshiba (Toshiba Video Player, etc.) would have an impact on the key features of function.
  However, the function key (F1 - F10) can be used in combination with or without the FN key. It depends on the special function key mode.

  In case you want to use the F1 - F12 functions without the FN key, the key mode of function must be enabled (should be set to the special mode of operation)

  Full details here how it works:
  https://APS2.toshiba-tro.de/KB0/HTD2503B90001R01.htm

  Now it these buttons would not work even if pressing the FN key, then there is a problem with the software.

  First of all I would recommend allows you to set the default BIOS because this mode key function can be changed in the BIOS too.
  After this, check if the key would work. If not, reinstall
  Key feature of Toshiba utility

  And the driver for the Toshiba system

  You can also check if the essential service has not been disabled.
  Start the Task Manager and go to start a number of questions. You must activate all Toshiba apps, services and then restart.

• Drivers for Win XP controls do not work on Satellite A200-1 g

  Satellite A200-1 g PSAECE-02D00ERU drivers for Win XP controls do not work!

  First of all I ve downloaded all the drivers for "model PSAEC.
  Everything is fine, but 'pilot controls. " When I install it, 6 buttons (play/pause, next, previous,...) Don t work! Become too slow cursor keys. By example, if I press it for 2 seconds in Word and then release, I can see the slow cursor movement while I m not doing anything.

  After that uninstall drivers controls (restart installation) the keyboard becomes normal but 6 buttons (play/pause, next, previous...) still don't work.

  What should I do?
  Help please!

  Please note that you must update the BIOS to the XP version if you want to use XP on this laptop Vista operating system!
  In addition, you need to install all the drivers of Toshiba in the right order. Check the installation instructions (available) txt file.

  Good bye

• Satellite A200 - 14 d PSAECE - Fn keys not working not not & other function keys

  Hello

  (1) I ask your help on installing my Fn keys drivers for my laptop Satellite A200 14 D PSAECE.
  My OS is Windows XP and I have Bitdefender Internet Security 2009.
  Drivers Toshiba download page, I got all the drivers for my laptop (36 of all - or close), but reinstalations of Xp a lot, I did on my laptop, only after all keys Fn worked when pressing Fn + key and the corresponding icons appeared on my screen. I have read a few forum topics and I understand there's a problem on the order in which I have to install (I already installed all, but it does not work), so I need someone to tell me who are the drivers for the Fn keys only and in what order to install. Don't forget that I can turn off my Bitdefender but not uninstall.

  (2) the same problem with the buttons preset above the keys - start-stop, Internet, Media Player, Play-Stop-Rewind, I need the driver and order.

  Thank you for your time :)
  Sorry if this question is already answer in the forum somewhere, but I couldn't get this exact answer.

  Hello

  I remember that the BIOS must be updated to the version of Win XP on Satellite A200 series.
  There are two different versions of the BIOS and installed (Vista or Win XP) the correct version should be used.

  But there are a lot of FN buttons which requires an additional installation of various tools.
  For example, the Touch Pad on / off Utility must be installed to use the FN + F9 keys.

  In addition, you must install the 3.22.2701 and 2.49.2.5C pilot controls in order to get control of Toshiba functionality of buttons.

• selection of the ring-control do not work. Cannot select any other item as the first item.

  Dear programmers cvi,

  I have some problems with a control ring in a panel of the CVI. the ring comprises several elements. No matter what I choose, the result will always be the first item. I can't select something else than the first (Recent not necessarily the default item).

  When I redraws the Panel, it works for the next few days. but somday in built version (production-application) the selection of ring control no longer works. When I start the uir-file in the labwindows cvi gui editor, I can understand the problem. Even in mode 'exploit' I can't select other elements than the first.

  When I convert the ring article in another ring (F11 key), and then convert back into the original it works again (1-2 days).

  When the problem appears, the contents of the file is always the same!

  I also redraw the Panel in different versions of labwindows cvi (2010/2012/2013), still the same problem.

  another ring-control on different panels (many more controls) never come whith this effect.

  all the guys there whith the same problem?

  corrupted file IUR is in the annex.

  Thank you!

  Kind regards

  Lukas roeder

  Hi Lukas.

  If you think the UI to be corrupted file, you can

  -Save in a version different (e.g. 2013 instead of 2010) and see if that makes a difference

  -Save it as a text TUI file and re - import (Options / Save in Text Format)

• On my brilliance of PC hp pavilion dm4 laptop controls do not work for a week.

  Product name: HP pavilion dm4

  Product number: LW475UA #ABA

  Operating system: Windows7 64-bit Home Premium

  For about a week, I'm not able to change the brightness on my laptop. Before I used to decrease f2 and f3 to increase the brightness of the screen. I do not know what is is past these commands stopped working, but (f10, f11) volume controls are still working fine now too.

  I contacted the support center hp on this issue they updated the graphics driver and they have updated the bios also but the problem is not resolved.

  When I click on the controls of light I can see the brightness meter icon but it wont increase or decrease when I press f3 or f2, respectively and the brightness meter shows brightness is at the lowest level that it is at the highest level.

  Thanks in advance for your help

  Hey I found the solution for my problem. On my laptop brightness controls do not work because I installed logmein (remote desktop) application that also installs some graphics drivers if you want that the features of the rotation of the screen on my laptop when I access my laptop to remote location. It seems that this driver causing the problem, when I completely uninstalled the app logmein brightness keys still work. For you all similar applications like this can be the cause of the problem. To solve this, go to the device (device type in the start menu Manager) see Manager is related to the applications that you have installed all the drivers are there under the display adapters in the Device Manager window, in the affirmative, uninstall applications completely it may solve your problem too.