control references; need help

Similar Questions

• Settlement data based on multiple selection ListBox reference need help

  Hello again,

  The question that I have is selecting from a listbox with multiple selection to fill the tables with the selected data. My code is as follows:

  Void loadData_EventClick (ByRef This)

  Dim j

  Dim k

  k = 0

  If ListBox.MultiSelection.Count = 0 Then Exit Sub

  For j = 1 To ListBox.Items.Count

  If ListBox.MultiSelection (j). Count = True Then

  k = k + 1

  End If

  Next

  TextBox.Text = k

  End Sub

  The code works perfectly up to the second if statement. My current channel group list contains 16 channels and with the second if statement guided the textbox output is equal to 16 (i.e. k = 16), which is what I expected. Im just using the k = k + 1 for the test. Eventually will be replaced by operating code specific to what I need to do.

  So the question that I have is to get the code to recognize what values are selected and referring to the index for the selections in a table. Im not sure on how to do it.

  Any help is very appreciated.

  Thank you

  ~ Nathan

  Attached JPEG shows the current user interface and the output of k with the second if statement commented

  Hey Nathan--

  ListBox.MultiSelection () is a function that returns an array of [multiple] selected items in ListBox.

  ListBox.MultiSelection.Count is a property that returns the number of items in the table above.

  Therefore, the logic in your second IF statement that says if ListBox.MultiSelection (j). Count = True really makes no sense because:

  1. The array returned by the multiple selection (using (j) indexing now refers to a single selected item in the list (which has not its own 'Count' property)
  
  
  2. If you don't the array index, assuming that you had selected 4 items in your list, your statement would still be actually as said if 4 = True which is not what you get.

  Make sense?

  Here is a modified version of your code that I hope makes it a little more obvious how these elements relate to one another.  Give it a run; of course, 75% of the code is extranneous to you working end to account, so make sure that you subsequently delete what you won't need.

  Sub loadData_EventClick (ByRef This) ' creates the event handler
  
    Dim j
  
    If ListBox.MultiSelection.Count = 0 Then Exit Sub
  
    TextBox.Text = "Total ListBox items:" & ListBox.Items.Count & + "" \n "".
  
    TextBox.Text = TextBox.Text & "Total selected items:" & ListBox.MultiSelection.Count & + "" \n "".
  
    TextBox.Text = TextBox.Text & "Selected Items:" & + "\n"
  
    For j = 1 to ListBox.MultiSelection.Count
  
      TextBox.Text is TextBox.Text & ListBox.MultiSelection (j). Text & ", index" & ListBox.MultiSelection (j). Index & + "\n"
  
    Next
  
  End Sub

  You are making great progress; It will get quickly easily faster and we are here to help – do not hesitate.

• Flash pro cc xul controls jsfl need help

  Hi all

  I had used flash cs for a while and used a lot of downloaded jsfl commands that would help to expedite the work

  Switched to cc lately and these commands do not work

  Heres a code not work orders.

  dialogue buttons = "accept, cancel" title = "Search and replace v1.0" >

  <>grid

  < columns >

  < column / >

  < column / >

  < / columns >

  < lines >

  < row >

  < label control = "engines" value = "" search for: "/ >"

  < textbox id = "engines" value = "" / > "

  < / row >

  < row >

  < label control = "RemplacerPar" value = "" replace with: "/ >"

  < textbox id = "RemplacerPar" value = "" / > "

  < / row >

  < spacer / >

  < radiogroup id = "Searchtypes" / >

  < label radio = "Find Items" selected = "true" / > "

  < label radio = 'Search selected' / >

  < / radiogroup >

  < / grid >

  < / dialogue >

  Could you tell me what to change so that I can run this command as CC

  Thanks in advance

  The arrangement seems to be somewhat inaccurate.

  is missing and waiting to be lost.

  Just after the last tag, you should put these two closing tags (above the tag).

  ------------------------------------------------------------------------------------------ ----------

     

     

     

          

          

     

     

          

          

     

     

         

             

             

         

• Using the value in the array to the variable of reference - need help

  Can someone tell me if this is possible in as3?

  I want to loop through an array and use the array value to refer to a variable.

  The installation program:
  (For illustration only. No real script)

  My MCs:
  triangle_mc
  square_mc

  Variables of placement:
  var triangle_mc_x = 160;
  var square_mc_x = 200;

  My table:
  [shape_array] (contains 'triangle_mc' and/or "square_mc")

  What I want to do:

  for each {(var: chaîne d'élément dans shape_array)}
  Item.x = Item + "_x";
  Item.y = 60;
  }

  It should do the same thing as:

  for each {(var: chaîne d'élément dans shape_array)}
  If (point == "triangle_mc") {}
  triangle_mc.x = triangle_mc_x;
  triangle_mc.y = 60;
  }
  If (point == 'square_mc') {}
  square_mc.x = square_mc_x;
  square_mc.y = 60;
  }
  }

  Thank you!

  I think what you are after...

  for each {(var: chaîne d'élément dans shape_array)}
  This [point] .x = this ["_x" + point];
  This point there = 60;
  }

  Although I have zero degrees of ease with this form of loop for... I was born and raised on the (I =?; I)

• Need help, cannot set references to Photoshop.Application in VBA

  Hello

  I've used CS5 in the past and have had a VBA program works well (running in Access 2010) which went very well, open Photoshop 32-bit and controlled photoshop CS5 normally, allowing me to manipulate photos, read metadata, etc.  (It was my understanding that at least for CS5, programs including VBA script necessary to run the 32-bit version of Photoshop, not the 64-bit version).

  About 6 months ago, I installed CS6 and VBA program continued to work perfectly, as it always opens the 32-bit version. (I had to be sure that I was not running 64-bit Photoshop when I started the VBA program).  CS5 was still installed but not used.

  I just uninstall CS5, leaving CS6 installed.  For some reason, he left the program VBA disturbed in that the references (that you set in the window of the VBA code with tools > References) no longer seem to be valid.  I can't set a new reference to Photoshop.Application, and the program became unusable.  In other words, the "references" list is more typotheque Adobe Photoshop CS6 or Adobe Photoshop CS6 Object Library.  I've traveled to the C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit) \TypeLibrary.tlb file to add this reference manually.  The programs does not yet compile (for example, appRef As New Photoshop.Application Dim causes an error "User Defined Type not defined").  I get the same failure to compile if I search for and install a reference to the 32-bit version, C:\Program Files (x 86) \Adobe\Adobe Photoshop CS6\TypeLibrary.tlb.  In the past, I also had a reference to the 'Adobe Photoshop CS6 Object Library".  I tried manually to C:\Program Files (x 86) \Adobe\Adobe Photoshop CS6\Photoshop.exe or the 64-bit version of Photoshop.exe, but these files are not accepted and I do not otherwise know the location of the file from the object library.

  I so need help from someone who knows how to solve this problem in the transition of CS5 at CS6 to use VBA.

  Thank you

  EGibbon

  There are global keys which crushed with every version of Photoshop. Photoshop.Application gets for example set for each installation of Photoshop. When you have uninstalled CS5 these keys got deleted.

  You can install CS6 again? You don't need to uninstall. Just install again if it will let you.

  I have a script that wil set them, but I don't really like to use it on other machines of people as it messes with the registry and I don't want to make it worse for you.

• Need help, trying to decipher my Panel event logs control for security and applications.

  Hi, I need help trying to figure out how to decipher my control panel the security event logs and logs application for account hacking.

  All the advice to learn how to see what who are normal and what is malicious?

  Occurrences of breach possible system, based on very high traffic for the opening of session and closing session and special privilege settings.

  Please notify.

  HP Pavilion DV9700 entertainment

  Windows Vista SP1 Home Premium 32

  I'll leave this thread closed, since I work with other people on another forum on this topic.

• Need help, something took control of my system!

  Something took control of my system, what I download, it reconfigures it to his advantage, I reinstalled the operating system 3 times. I pulled a temp file "summary, it says software strategy limited, enable, concealment and attempt to activate all privelages disable them before calling VSSWMSI install on the server."  The system is also reinstall all the downloads that I downloaded every day, why? What I just deleted half of the information I have given you. So I have to retype it again. Everything I downloaded, gets reinstalled every day. I can't uninstall ASP.NET, which I never installed everything first, I can't uninstall certain updates to include SP3. Every software that I installed it, to correct the problems, his reconfigured so fast, when I run the scanners, it does not detect anything. When I read this VSSWMSI in summary, I fell its Microsoft that is the cause, if his microsoft "tell me." If it's not you, "I apologize." A person is keeping an eye on me, when I go to ebay, I make changes on ebay, one that is followed, is not my changes, until it takes a snapghot. I don't know what to do, everything I try, the system RECONFIGURE it. His rewrite of the register, its taken control of networking. I can tell you, that local systems has something to do with my problem. The last time I reinstalled the OS, it reconfigured the firewall. Need help?

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Try to run the scan on the computer online and check if it helps:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.

• Hi, I do not know why the moment I try to buy a package of software for my business, I can't go any further because I can't select my country (ITALY-EURO) COSTA RICA control value is selected automatically. I need help. A lot of satisfaction

  Hi, I do not know why the moment I try to buy a package of software for my business, I can't go any further because I can't select my country (ITALY-EURO) COSTA RICA control value is selected automatically. I need help. A lot of satisfaction

  Contact Adobe Support when available (usually not weekends)...

  Chat support - the link below click the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• I need help with the control of two .swf in third.

  Hi, thanks for reading!
  
  I need help with the control of two .swf in third.
  
  I have a problem when I need to use a .swf in a digital signage solution, but were advised by the Legal Department, it cannot be changed in any way, I can not also have the source file blah blah blah. I pulled the .swfs on their site and I decompiled to see what I was up against.
  
  The main SWF that I need control is HCIC.swf and the problem is that it starts with a preloader, which, after the loading stops on a framework that requires user input to (button) on a play button, until the film will proceed and replay.
  
  What I've done so far is to create a SWF container, HCIC_container.swf, which will serve as a target for the HCIC.swf and I would like to send actionscript in the file, I am not allowed to edit.
  
  I managed to get done with help from someone on another forum. It is my hope that the following script just start HCIC.swf a framework after the preloader and button play and just play through.
  
  var container: MovieClip = createEmptyMovieClip ("container", getNextHighestDepth());
  var mcLoader:MovieClipLoader = new MovieClipLoader();
  mcLoader.addListener (this);
  mcLoader.loadClip ("MCIC.swf", container);
  
  function onLoadInit(mc:MovieClip) {}
  mc.gotoAndPlay (14);
  }
  
  But unfortunately it does not solve my problem. Because there is a media - controller.swf, which is charged by HCIC.swf who has orders, including the play button to start HCIC.swf.
  
  Here is a link to a .zip with all 3 files .swf file and all 3 .fla files.
  
  http://www.axiscc.com/temp/HCIC.zip
  
  What I have to do is to automatically start the HCIC.swf file, bypassing the pre-loader and play button without having to edit it or in the media - controller.swf in any case. Thus, all scripts must be done in HCIC_container.swf.
  
  I know it is confusing and it is difficult to explain, but if you look at the files it must make sense.
  
  ActionScripting is far from my point hard, so I'm definitely over my head here.
  
  Thanks for your help.

  Got my solution on another forum.

  http://www.ActionScript.org/forums/showthread.php3?t=146827

• Control reference 1055 error when you use a loop for

  Hello

  I'm having a problem using control references to accomplish the following: I a VI that reads data from a text file, and then uses that automatically update the value of a control on front panel on two live different, then set the default values, and then save them. Comes from the array of control references, I tried looping on text labels until I have find the one corresponding to the order, I want to change and then update its value. The problem I have is that if I use a loop for, then 9times of LabVIEW 10 complains error 1055: "LabVIEW: object reference is not valid. If instead I the wiring to the index table and manually extract the reference, then it works every time and for each index of the reference of the order.

  Can someone take a look at my code and just see if its obvious what the problem is? In this case, I have a simple solution, but I would really like to understand what I did wrong. I have included as a code snippet, but also attached the files if that helps (Its Import_Colormap.vi, which is the problem). Persons with disabilities code fails, the active code works but I can't see what is really the difference between them - I can change the index of array 0,1,2, 3. and no mistake.

  Thank you.

  

  Your "Colormap.ctl" is a strict type def that contains a ring.  You define the elements programmatically, make the default values, and then save the "Colormap.ctl"?   I was never practicing this but here is a thread that covers this in detail. I do not understand what you expect reach by running.
  The next thing: at the same time (at the same time!), you open the Colormap.vi (this is what we see in yout PNG) that contains an instance of the Colormap.ctl on the front panel. I'm not pretty sure if LabVIEW can handle this correctly. This could be the reason why you sometimes get the error 1105.
  I prefer StringsAndValues and eventually the value of the ring running.  There is no need to do it with a def of strict type.

• [SOLVED] I need help for Shared Documents and Documents on my computer XP Home

  I need help with my shared Documents and other folders on my computer. I have an administrator account. My son has a limited access account.

  I clicked on the option 'make my private files and folders '.  His file was renamed to Documents now my shared Documents. It's just my account.

  I tried to undo what I did. I tried everything (I mean everything) has proposed to do online.

  First of all, I logged in Safemode administrator account. I went to the Documents folder, and I've added the Administrators group and click full control.

  Then I restored system a few weeks before. Then, I went to http://computers.douglasthrift.net/winxpfaq/#faq3_shared_documents and did everything.

  None of them worked. I did so much, that I don't remember.

  Then, I found that the registry key for the Shared Documents lacked in the MUi cache. @shell32.dll,-21785. I entered, but after I rebooted a few times, he disappeared. I have to hurt... In addition to this. Now I face a different problem. I don't know it is normal but when I login my account and click on

  My computer, I see Documents of my name and the name of my son in addition to Documents (Shared Documents).

  When I save a new file in the My Documents folder, it is automatically created in the folder of Documents of my name, too. I can't delete them because they are system folders. I crossed my registry keys in the MUI cache and discovered that 4 of them did not exist in other accounts.

  @shell32.dll,-21792; 21793; 21794; 21795 (%, etc. of music of % documents). I don't know if I can delete them or not.

  I'm not an expert in computers. I'm sorry that it is very long.  I hope someone can help me. Thank you.

  Hello

  I suggest you follow the troubleshooting steps and check if this solves the problem on your computer.

  Method:

  Ra SFC scan to search for the missing or corrupt files that can cause this problem.

  Of file system (CFS) when checking that all the Windows XP system files are intact and not altered, changed or damaged.

  a. Click Start, click programs, accessories, command prompt principally made.

  b. in the type in the following command prompt window and press ENTER:

  sfc/scannow

  If you are prompted to insert the Windows XP disc, load the disc of Windows XP on the CD drive on your computer.

  Once the scan finished restart your computer and test to see if the problem you are experiencing is resolved or not.

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  I hope this information helps. Please get back to us if you have any other questions on this subject.

• Need help implimenting MORE FLA in c ++ via XMP sdk

  I am apparently suffering from the brain stem major bitrot and generating a lot of brain coredumps, and I need help.

  I use the XMP toolkit sdk 5.1.2 in c ++ under gcc on Debian to impliment incorporation MORE FLA licensing metadata (reference: http://ns.useplus.org/LDF/ldf-XMPReference ) in images.

  I have no problem generating more consistent DFL xmp in the code for all EXCEPT for line inputs simple detail like "<RDF: type RDF: resource=" more: LicenseeDetail "/ >" in several places in the specification of the FLA, namely:

  < holder: more >

  < RDF: SEQ >

  < rdf:li >

  < RDF: type RDF: resource = "more: LicenseeDetail" / >

  < LicenseeID: more > http://plus-ID.org/AAA-987 < / more: LicenseeID >

  ABC advertising agency < more: LicenseeName > < / more: LicenseeName >

  < / rdf:li >

  < / RDF: SEQ >

  < / more: holder >

  I can generate the appropriate memory then parse text to get an appropriate SXMPMeta and merge that, but I'd really like to be able to correctly generate the xmp in the code and would appreciate any help to prevent any new brainrot!

  I am sure it is simple and banal, but now I can't see the trees because of the forest... Thank you

  Hello Michael, thanks again for your questions and suggestions, Professor Garcia is one MORE volunteer who provided valuable assistance and advice in the original drafting of our license data Format specifications. His post here as a result directly of my request for his comments in response to this question raised in this thread, independently confirms that our understanding and our approach is correct.

  I confirmed that the items that you can't generate are not necessary in XMP and we have removed the examples listed in our spec.  Please note that although some of the examples in our FLA XMP specifications online, it lacked the attributes 'rdf:parseType', all these appear correctly in the downloadable example files. These unintended omissions have been corrected as well. We suggest using our downloadable example files.

  The suggestion in your most recent message about our version control was wrong but understandable.  The difference between the previous specifications and specifications in place at the time that you copied recently it is of course the result of ongoing changes in response to this issue, shared among other volunteers experts advising MORE.  A you have copied a few moments later, you would have probably found the 1.2.1 update version number.  That said, once we fixed a minor error in the presentation of the specification rather than a material revision to the specification itself, we may or may not choose to note this review.

  Please indicate any other matter related to the specification or to the adoption of the standards. As we have demonstrated here, we act quickly to solve these issues.

  See you soon

  Jeff

• Satellite Pro A300-15V, I need help in the Organization of my startup list

  Hello everyone!

  I need help in the Organization of my startup list:

  (Why should Toshiba button support I this program if my laptop doesn't have multimedia keys? OR maybe this program for something else?)
  ItSecMng (although I have disabled the Bluetooth Manager to run when starting from this point still remains in the startup)
  Agent of filtering of Audio Conexant high definition (what is this program? Do I really need to start?)
  TOSHIBA Power Saver
  Toshiba Flash Cards
  RAID event monitor

  So, my friends. Could you give a valuable suggestion whether or not it is prudent to disable startup above entries? I want to speed up my laptop at the highest possible level.

  Thanks a lot for your time!

  Kind regards
  Osman.

  My laptop:

  Toshiba Satellite Pro A300-15V (PSAJ5E) => NOT have multimedia keys except the FN keys.

  > Toshiba Button support (why should I this program if my laptop doesn't have multimedia keys? OR maybe this program for something else?)
  You can disable it. If your mobile phone does not support the multimedia buttons then this tool is useless.

  > ItSecMng (although I have disabled the Bluetooth Manager to run when starting from this point still remains in the startup)
  I don't know what would make this process, but you can disable this in msconfig-> tab start Mr. If it would take in the future, then you could turn it on again.

  > Agent of filtering the Conexant high definition Audio (what is this program? Do I really need to start?)
  I think that this is necessary. It could improve your audio

  > Toshiba Power Saver
  This is important. It s an additional saving of Toshiba option for Win 7

  > Toshiba Flash Cards
  This tool controls the FN keys.

  > RAID Event Monitor
  Hmm so you don t have two hard disks, then you can try to disable it too.

• Display settings S920 missing page, need help

  Hello

  I have a strange problem with my phone S920 and need help.

  First I describe that I made:

  I bought two phone weeks and first install update "by air" (from the settings menu, "System Update"). The current version number is S920_ROW_S117_130815. After that, I set the settings on the phone, insert the SIM and SD card and started to install applications. When I found that photos from my SD card are not visible in the gallery. He won't get the images in the external SD card. I can see all the files on this map in the file browser and open, but the Gallery shows only a few files from SD internal tried to force to re-scan of the media files. Finally, Gallery shows all the photos, but I found some files on my SD card had size = 0 bytes. SD card was probably not properly disassembled during a new analysis. I've wiped the SD card in settings of the phone and coppied all data to the SD card in my PC. And re-scan again. Now all the files was correct and all images is vissible in the gallery. But a few days later, I found that I can't run page display settings. I tried to access to this-> all the settings, fron-> display settings but received a message "Unfortunately stopped Control Panel:

  OK, I noticed that my problem disappeared after I disabled my live wallpaper. Let me tinker some more...

• Binding controls reference

  Hello

  I would like to know if there is a possibility to bind controls of the same type of reference data, so that they contain the same data.

  This means that when you write to a property "Value" of the reference it automatically updates bound control without having to update "manually" go in a loop or using 'value (signalling)' / combination of the event.

  I would use it for a central display (one man control formatted) which can be activated to display one of the multiple values will cause updated (currently by the value property). For example allow a user to choose between analog input 0.7 then display the value accordingly (and keep up to date automatically).

  Best regards, W@Work

  Nope, no such construction. A better solution would be to pass data around, rather than controlling the references. In the loop of data generators, instead of write control references, to group the values and put the cluster in the notifier. Then, in another loop, pull the last notification, select the appropriate value and connect directly to the indicator. Control references are inefficent (they need a switch to the UI thread).