Control the user wait times in the workspace

Similar Questions

• Control the simulation time to align the time system

  Good so maybe it's blindingly obvious or just simply a ridiculous question but here goes:

  I run a dll that I produced from a .mdl file. My goal (among others!) is to get the dynamic response of the exact model of 'real world' calendar (date system). The tuning for the appearance of the control of this model is based on the duration of simulation with produced in simulink and so it is desirable for me to define the duration of the simulation to run when the system.

  The problem I have, if you open the workspace and produce a template control, the simulation shown time is much faster than the time system.

  For example, one iteration of the model takes a fraction of a second. What I imagine happens, it is immediately restart (and progress of a time step). I guess I want the model to wait until it is in harmony with the system time before iterate again.

  Is there a way to solve this problem, and do anyone know if this problem will be resolved in Simulink or Veristand 2009.

  Any information would be appeciated, my trawl of the help files OR have not really answered the questions yet good

  Thank you
  James

  The models are running in sync with the rest of the system. Unless you specify a decimation factor for your different model of 1 for each tick of the primary control loop your model put once, too. The difference between the model and system duration that you see is due to the fact that the model time is based on its time not Delta T compiled, not any of the wall clock time. Every time that the model is Ticktock, it adds its own Delta T to its operation time string.

  The time channel system is based on the Delta T of the primary control loop. Thus, it corresponds with the rate you specified the system to run at. If these Delta Ts are the same, are aligned at the same time. If you want the time to model to match an actual wall clock time, you can adjust the flow of the loop of the primary control loop to match the Delta T, or adjust the factor of the decimation of the model so that it gets only checked once for every N the primary control loop iterations.

• Control the time times of high and low of trains of pulses in C++

  Dear team of support of National Instruments,

  Here's what I have so far:

  I was able to generate the number of pulses (a pulse = a rising edge and front descending one) that the user has indicated via the GUI I created in Visual C++ 2008.

  I use DAQmx 8.6.

  I use the DigitalSingleChanWriter (hopefully, that's what it's called).

  I use for the synchronization of the sample, on request.  I tried to use all other types of calendar but I always get a DAQException run the error that says I can use only OnDemand calendar.

  OK, so here's the problem:

  I have a USB-6008-6009 card connected to an oscilloscope.  I know that the connection is correct, otherwise nothing would appear.  However, if I send say... 6 impulses, the delay between the first rising edge and the first falling edge is dramatically different and then the second and the third.  If I return my samples, I get an assortment of new and totally random times.  So finally, my question is "Is there a way to control the time of a great time and a bit of time?"

  I use a Compaq 2003 lap top, what is worthy of the rubbish heap.  I'm not to blame on this right away as problems that will not solve the problem at hand.  Although I understand if it's actually the problem for random times, but I would still have no way to control the time themselves.

  I hope that I don't have drug it too long, but I decided that distribute information on would be better then just a few tid bits.

  Thank you for support, that you can offer,

  Daniel

  OK, so I just returned from the lab, and this is what I got:

  I was able to control the time at the time of the high and low by using the "WriteSingleSamplePort" of the DigitalSingleChanWriter method.

  I put it in a loop that repeated many times that the user wanted impulses.

  At the beginning of the loop, I used a delay function that I wrote and delayed for a time given and then a pulse with a value of 255 and then delayed again and a pulse with a value of 0. And then restarted the loop.

  In the end, it works.

  Of course, I have another question.  I kept reducing the amount of time between two pulses (1 s, .5s, .2us and so on).  However, once I have diminished the time of secondes.01 or a millisecond, the pulses on the arrested oscilliscope becomes smaller.  It seems that past 1 millisecond Board USB-6008/6009 is unable to deal with the exigencies of the moment.  Or else the computer trash part on that I cannot deal with the exigencies of the moment.  But I believe that the Council is not at fault because it was designed for this exact sort of thing, could you tell me if there is no limitation to the Commission which prevent production of pulses in or within a period of 1 millisecond.  Thank you very much.

  Thanks for all the help,

  Daniel

  P.S. I'll stop you buggin with big messages that I promise you.

  P.P.S.  If someone wants to see my source code for their own project, I'd be more than willing to share.  Please email me or leave a message here.

• Date and time display on the workspace

  Is it possible to display the date and time on the workspace window?

  An example of a control that you can add to the workspace to display the date and time on your host PC is attached. I created it by following the instructions on this page. If you want to make any changes or customize it more, this document can help you get started. I based off of decoration - free label template, so that I could completely customize the behavior of the control.

  To use this control, simply copy \National Instruments\NI VeriStand models 2011\Display to .

  

• the user will not erase & isn't in Control Panel users

  If I go to C:\Documents and Settings, there is a user that I never had and want to get rid of. But this user has never been and is not present in Control Panel > users. If I try to remove it from C:\Documents and Settings, it starts with a box to confirm deleting file saying 'the file 'xxxxx' contains items whose name is too long for the trash. Do you want to permanently delete it? "I click Yes or Yes to all.

  Then he quickly paged home with a box titled error deleting file or folder that says "cannot delete the XXXXXXXXXXXXXXX: cannot find the specified file." Be sure to only specify the path and the correct name. I click on one button, OK, and I'm done. It will not erase. So I renamed this user ' broken but will not erase "other users on this list are administrator, Administrator.JEFF - A40763A256, all users, all Users.WINDOWS, by default, the User.Window default user, guest, Jeff.JEFF - A40763A256 (me). Not sure why mine has this weird kind of thing next to my name (?). In any case, I guess this isn't a problem.

  If I look in Control Panel > user accounts, I see that Jeff (Administrator) and comments - the guest account is disabled. These are the only two users ever.

  You can manage your startup to find out why your computer is experiencing difficulties of start and stop. Certainly I would test the hard drive.

  Start > run > msconfig [Enter]

  This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

  Important - do not use the System Configuration utility to stop the process. Use rather Start > Run > services.msc [Enter] and stop all services unless you really, really know what you're doing.

  How to troubleshoot by using the Msconfig in Windows XP utility -http://support.microsoft.com/?id=310560
  The free Autoruns program is very useful for managing your Startup -http://www.microsoft.com/technet/sysinternals/default.mspx

  Clean boot in Windows XP -http://support.microsoft.com/kb/310353
  Boot minimum troubleshooting Windows XP - Advancedhttp://support.microsoft.com/kb/316434

  Test the hard drive with a diagnostic utility downloaded from site of the disc mftr. or use SeaTools for BACK of Seagate. You create a bootable CD with the files you download. You will need a third party burning software to do as the free ImgBurn, Nero or Roxio. Burn as an image, not in the form of data.

  http://www.ImgBurn.com

  http://www.Seagate.com/www/en-us/support/downloads/SeaTools/seatooldreg
  http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=201271 (how-to)

  Boot with the CD that you have done and do a full test of the reader. The physical tests fail, replace it.

  If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad).

  MS - MVP - Elephant Boy computers - don't panic!

• How the expected wait time is scripted?

  Hello

  Can someone tell me what controls are needed and where they should be placed in a script and what variables I need to create if everything for a very basic should expect a time?

  I looked at previous assignments and I'm not. The only control I see that would be necessary is to get statistical reporting, but I know not where to put it or how to play people in the queue the message of what the expected wait time is.

  Please advise,

  Thank you

  Chuck

  You can use the step get statistical Reporting to fetch the expected waiting time (in this step, the "line identifier" parameter is interested in the CSQ).

  The expected wait time is in seconds, so you can convert this to minutes and then use a series of guests as well as a "create generated Prompt" to announce the waiting time.

  Take a look at these messages in previous discussions:

  http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=Contact%20Center&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddd7fa7/2#selected_message

  http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=Contact%20Center&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddc3cea/1#selected_message

  Please note the useful messages!

• No planning application is visible in the workspace for users

  Hey,.

  There is a problem in prod and dev, it's nothing of the application are visible in the workspace-> Navigate-> Applications-> planning for normal users, admin user can check all applications in building and planning.

  env: 11.1.2.1, please help.

  Thank you

  Kumar

  If the administrator account can connect through the workspace should be check the provision of Shared Services, if you use a control AD there is no problem with connectivity, check the logs.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Problem in opening up financial reports from the workspace using a normal user id

  Hello
  
  We have recently migrated from version 9.3.1 (32-bit) to Oracle EPM 11.1.1.3 version (64-bit) and have a major problem with financial reports:
  
  * User who is configured as an administrator for the purpose of planning or reporting and analysis administrator can access a financial report to the workspace without any problem.
  
  * a normal user who is configured as a viewer, Explorer, analyst, editor of personal settings (under reporting and analysis) can see the POV and NOT the report. The report is just empty.
  
  * If a group (say A) is assigned 'administrator reporting and analysis' and 'Request for trust' and a normal user is assigned to this group, the user can then access the financial report with no problems. But we don't want to do coz:
  
  The normal user gets access to access shared services
  The user also gets see all other records and reports in the workspace to which he has no access to. The reports that are not in its right of access using the incorrect data gives.
  If the reports and analysis administrator privilege is removed from Group A and NOT 'Trusted Application', existing users in the group can still see the reports to which they have access to (with other documents to which they do not have access to). But if a new user is created from scratch and added to this group, it gets again a report empty with POV.
  
  
  Please let me know if anyone has experienced this problem and found a work around.
  
  
  Thanks in advance!
  
  
  Here is our environment.
  
  *****************************************************************
  The Oracle EPM system has been downloaded oracle delivery Web site
  * Oracle Enterprise Performance Management (11.1.1.3.0) Media Pack for Microsoft Windows x 64 (64-bit)
  
  Environment of the EPM system is as follows:
  A server:
  Shared services, planning, workspace, web, calculation of financial information manager application
  
  ServerB:
  Essbase server, Essbase Administration services, provider services
  
  C Server
  Financial reports, Webanalysis

  It drove me crazy. The minimum amount of access I could give users was Bishop content rights so that they are able to run the reports.

  I connected it with Oracle and they finally gave me with the solution.
  Bug # if you are interested is 8991596, but I think it is unprecedented.

  WARNING: I highly recommend that you talk with support and mention this bug number before executing this SQL.
  This code worked for me and I don't have problems after running it but I ran this on a first test environment. I accepts no responsibility if your environment explodes etc etc!

  See you soon,.
  Gee

  # 1. Run the following SQL to display the internal records.
  # "Show hidden objects" must also be enabled in Explorer to display the folder.

  update of v8_container the internal value = 1 where parent_folder_uuid = "HRINTERNALFOLD" or container_uuid = "HRINTERNALFOLD".

  # 2. Remove all files in the folder "HRInternal" from the Explorer.
  # Do not delete the HRInternal folder!

  # 3. run the following SQL to reset the folder "internal".
  update the internal value = 0 v8_container where container_uuid = 'HRINTERNALFOLD. '

  # 4. Run the following SQL to recreate the folders with access to the global group

  INSERT INTO V8_CONTAINER (CONTAINER_UUID,META_TYPE_UUID,PARENT_FOLDER_UUID,NAME,CREATION_DATE,EXPIRATION_DATE,DESCRIPTION,CLASSNAME,BROWSABLE,AUTO_DELETE,CASCADE_DELETE,DELETED,SUPERCLASS,USER_ATTR_FLAG,USER_NAME,GROUP_NAME,PUB_RATING,IS_INLINED,OCOL_METATYPE_UUID,LAST_MODIFIED_DATE,CAN_HAVE_EXCEPT,INTERNAL, OWNER_LOGIN, IS_FOLDER ) VALUES ('USERPOVFOLD','ID03','HRINTERNALFOLD','UserPov',NULL,NULL,NULL,'com.sqribe.transformer.Folder',0,0,0,0 ' com.sqribe.transformer.Folder' (, 0, 'administrator', 'world', 0,0,NULL,NULL,0,1, 'administrator', 0)

  INSERT INTO V8_CONT_VERSION (CONTAINER_UUID, VERSION_NUMBER CREATION_DATE, LAST_MODIFIED_DATE, FILE_SIZE, CLIENT_FILE_NAME, HAS_EXCEPTION) VALUES ('USERPOVFOLD', 1, NULL, NULL, NULL, NULL, 0)

  INSERT INTO V8_FOLDER (CONTAINER_UUID, VERSION_NUMBER, FOLDER_FULL_PATH) VALUES ('USERPOVFOLD', 1, '\HRInternal\UserPov')

  INSERT INTO V8_FOLDER_TREE (FOLDER_UUID, ANCESTOR_UUID) VALUES ('USERPOVFOLD', 'USERPOVFOLD')

  INSERT INTO V8_FOLDER_TREE (FOLDER_UUID, ANCESTOR_UUID) VALUES ('USERPOVFOLD', 'HRINTERNALFOLD')

  INSERT INTO V8_CONTAINER (CONTAINER_UUID,META_TYPE_UUID,PARENT_FOLDER_UUID,NAME,CREATION_DATE,EXPIRATION_DATE,DESCRIPTION,CLASSNAME,BROWSABLE,AUTO_DELETE,CASCADE_DELETE,DELETED,SUPERCLASS,USER_ATTR_FLAG,USER_NAME,GROUP_NAME,PUB_RATING,IS_INLINED,OCOL_METATYPE_UUID,LAST_MODIFIED_DATE,CAN_HAVE_EXCEPT,INTERNAL, OWNER_LOGIN, IS_FOLDER ) VALUES ('DATASOURCESFOLD','ID03','HRINTERNALFOLD','DataSources',NULL,NULL,NULL,'com.sqribe.transformer.Folder',0,0,0,0 ' com.sqribe.transformer.Folder' (, 0, 'administrator', 'world', 0,0,NULL,NULL,0,1, 'administrator', 0)

  INSERT INTO V8_CONT_VERSION (CONTAINER_UUID, VERSION_NUMBER CREATION_DATE, LAST_MODIFIED_DATE, FILE_SIZE, CLIENT_FILE_NAME, HAS_EXCEPTION) VALUES ('DATASOURCESFOLD', 1, NULL, NULL, NULL, NULL, 0)

  INSERT INTO V8_FOLDER (CONTAINER_UUID, VERSION_NUMBER, FOLDER_FULL_PATH) VALUES ('DATASOURCESFOLD', 1, '\HRInternal\DataSources')

  INSERT INTO V8_FOLDER_TREE (FOLDER_UUID, ANCESTOR_UUID) VALUES ('DATASOURCESFOLD', 'DATASOURCESFOLD')

  INSERT INTO V8_FOLDER_TREE (FOLDER_UUID, ANCESTOR_UUID) VALUES ('DATASOURCESFOLD', 'HRINTERNALFOLD')

  INSERT INTO V8_CONTAINER (CONTAINER_UUID,META_TYPE_UUID,PARENT_FOLDER_UUID,NAME,CREATION_DATE,EXPIRATION_DATE,DESCRIPTION,CLASSNAME,BROWSABLE,AUTO_DELETE,CASCADE_DELETE,DELETED,SUPERCLASS,USER_ATTR_FLAG,USER_NAME,GROUP_NAME,PUB_RATING,IS_INLINED,OCOL_METATYPE_UUID,LAST_MODIFIED_DATE,CAN_HAVE_EXCEPT,INTERNAL, OWNER_LOGIN, IS_FOLDER ) VALUES ('HRSCHEDULERFOLD','ID03','HRINTERNALFOLD','DataSources',NULL,NULL,NULL,'com.sqribe.transformer.Folder',0,0,0,0 ' com.sqribe.transformer.Folder' (, 0, 'administrator', 'world', 0,0,NULL,NULL,0,1, 'administrator', 0)

  INSERT INTO V8_CONT_VERSION (CONTAINER_UUID, VERSION_NUMBER CREATION_DATE, LAST_MODIFIED_DATE, FILE_SIZE, CLIENT_FILE_NAME, HAS_EXCEPTION) VALUES ('HRSCHEDULERFOLD', 1, NULL, NULL, NULL, NULL, 0)

  INSERT INTO V8_FOLDER (CONTAINER_UUID, VERSION_NUMBER, FOLDER_FULL_PATH) VALUES ('HRSCHEDULERFOLD', 1, '\HRInternal\DataSources')

  INSERT INTO V8_FOLDER_TREE (FOLDER_UUID, ANCESTOR_UUID) VALUES ('HRSCHEDULERFOLD', 'HRSCHEDULERFOLD')

  INSERT INTO V8_FOLDER_TREE (FOLDER_UUID, ANCESTOR_UUID) VALUES ('HRSCHEDULERFOLD', 'HRINTERNALFOLD')

  -Give full control access to the UserPov of human resources to the global group
  insert into V8_ACCESS_CTRL (id_ressource, ACCESSOR_ID, ACCESSOR_TYPE, GRANT_ID, GRANT_TYPE) VALUES ('USERPOVFOLD', "0ad72237 - c 008 - 0d 59-000000e4d26d0c20", 2, "0ad72262-0000 - 0 has 78-000000e9583bf0f0", 1).

  HRInternal - dummy record owner
  insert into V8_RESOURCE_OWNER (id_ressource, OWNER_ID, TYPE_ID) VALUES ('USERPOVFOLD', ' 00000000-0000-0000-0000000000000000', "0ad72298-0000-0ccc-000000e750dc47f8")

  -Give full control access to the data directory of human resources for the global group
  insert into V8_ACCESS_CTRL (id_ressource, ACCESSOR_ID, ACCESSOR_TYPE, GRANT_ID, GRANT_TYPE) VALUES ('DATASOURCESFOLD', "0ad72237 - c 008 - 0d 59-000000e4d26d0c20", 2, "0ad72262-0000 - 0 has 78-000000e9583bf0f0", 1).

  HRInternal - dummy record owner
  insert into V8_RESOURCE_OWNER (id_ressource, OWNER_ID, TYPE_ID) VALUES ('DATASOURCESFOLD', ' 00000000-0000-0000-0000000000000000', "0ad72298-0000-0ccc-000000e750dc47f8")

  -Give full control access to the HR planner record for World Group
  insert into V8_ACCESS_CTRL (id_ressource, ACCESSOR_ID, ACCESSOR_TYPE, GRANT_ID, GRANT_TYPE) VALUES ('HRSCHEDULERFOLD', "0ad72237 - c 008 - 0d 59-000000e4d26d0c20", 2, "0ad72262-0000 - 0 has 78-000000e9583bf0f0", 1).

  HRInternal - dummy record owner
  insert into V8_RESOURCE_OWNER (id_ressource, OWNER_ID, TYPE_ID) VALUES ('HRSCHEDULERFOLD', ' 00000000-0000-0000-0000000000000000', "0ad72298-0000-0ccc-000000e750dc47f8")

• HP workspace: can users save files directly on their Elite x 3 HP or on a USB key using the workspace?

  Hey everybody,

  Can users save files directly on their Elite x 3 HP or on a USB key using the workspace?

  Thank you

  Bill

  Yes. Users can save files between workspace of HP and the HP Elite x 3 device or on a USB key.

• SMU-6556 - how to control the rise in digital lines (hsdio) time

  Hello

  Is it possible to control the rise in digital lines SMU-6556 time?

  Even in a low frequency 10 kHz signal rise time is 2ns.

  TKS,

  Hello engfpe,

  The SMU-6556 is a 50 Ohm system, which means that the output is source series finished to be 50 Ohms and all our cables and accessories are 50 Ohms.  With this configuration, regardless of the flow of data, you should have a clean edge up or down, regardless of the data rate. The quality of the production (edge up or down) on your device is related to the adaptation of impedance of your cables.

  The SMU-6556 cannot adjust the speed of scanning by itself.  However, you can insert simple passive components to do it for you.  I have attached below the images.  The first is a diagram showing a way to slow down the edge.  The second is the a waveform simulation showing the rate of original edge before it slows down and the edge of idle.   This simulation is not the SMU-6556 but rather a generic digital output for concept.  In the schema that R1 is set on 34 Ohms because U1.8 has the 16 additional Ohms on the inside.  TL1 is the output of 50 ohms simulating the cable on the SMU-6556.  R2, R3, and C1 are components, you can insert after the SMU-6556 twist before moving your device/cable.  In this configuration from cable to your device is TL2 which is also 50 ohm, but it could be another impedance in which case you would change R3 to match.

  You can see in the attached images, you can slow down significantly the edge with this configuration by altering the C1.  I hope this helps.

• CHKDSK runs everytime I turn on my computer, complete control, the computer tries to start and goes back to CHKDSK every time. Does this mean that my hard drive is crashed?

  CHKDSK finishes control, complete control, the computer tries to start and goes back to CHKDSK everytime, it means my hard drive crashed? and if so, can I just replace the hard drive and then have my technical support help reload my data?

  Hi Karen,.

  ·         Since when are you facing this problem?

  You can check if this article helps.

  CHKDSK runs each time that you start your computer

• How can I keep the "on-screen keyboard" to invite the user every time that I reboot? The system is Windows Vista.

  How can I keep the "on-screen keyboard" to invite the user every time that I reboot? The system is Windows Vista.

  Please explain what you mean... "incentive"?

  The keyboard screen is not supposed to be enabled when the computer is turned on.

  Here's how to turn off on-screen keyboard:

  http://www.Vistax64.com/tutorials/72733-screen-keyboard.html

• Is it possible to control the opening and the closing time of a script by an officer being connected?

  Hi Experts,

  We currently use scripts UCCX 7.0 with opening and closing hours of CSQ controlled via defined under the time of day in the script.

  I would like to know if it is possible to control the opening and the closing time of a script based on an agent is connected or not?

  So basically, the office is deemed open when an agent is connected and deemed closed when there is no connected agents regardless of the time.

  If possible, can you kindly point me in the right sense of how implement this corresponds to the script.

  Kind regards

  THERE.

  Hello

  Sure... in short:

  -Use a step "to obtain the statistical report" to see how many officers is connected, or "ready" (your choice) and store that in an int variable

  -If this > 0 then 'goto' your behavior variable open.

  -If it is 0 or - 1, then goto closed.

  Aaron

• IPCC Express estimated the waiting time in the queue

  I have an ipcc express 4.0 and my client wants the number of callers to hear a prompt indicating the estimated waiting time in the queue.

  Is this possible with this solution? Maybe to deal with scripts.

  Any idea?

  Jose

  Jose,

  You can do the process you like through the IPCC Express Scripts.

  You must use the "Get Reporting" statistical step under 'IPCC Express' in the script editor and choose the statistics that you want, in your case, you have to select 'Report object'-> 'CSQ IPCC Express' and afte, select 'Area'-> "Expected wait time", store that value in a variable to create as a guest to read the value.

  Hope this helps,

  Juan Luis

• Able to connect to the workspace, even without access users.

  Hi all

  We are working on Hyperion 11.1.2.1. We have configured our MSAD for logon authentication. Strangely, few of our AD users can able to connect to the workspace (of course they can see and access anything be it inside) do not have access to all of the Hyperion products. They are not part of a group or that you have not any provision for access. My question is: is every user able to connect in the workspace, AD even if they are not provided?

  Please let me know.

  Take a look at the workspace setting the 'Role of connection', more info - required more to life than that...: EAS 11.1.2 session timeout and space work of advice

  See you soon

  John

  http://John-Goodwin.blogspot.com/