controling printing resolution

Similar Questions

• Unable to print, error 'decrease your printer resolution.

  Original title: printer stopped communicating with HP Mini. Do not download. Wants to change resolution but will not save the change.

  I have a HP Mini which, up to a month or two ago, communicates very well with my printer HP Photosmart 7450. Then suddenly they stopped communicating. When I put a memory card in the printer, it will open a box on the computer. But not vice versa. So, I tried to reload the driver from the HP website and I get an error message that needs my screen to 800 x 600 resolution. But when I try to change the resolution, it will not save. Help!

  Hi BBahn,

  1. What is the exact error message?
  2. how the printer is connected to the computer?
  3. When you try to change the resolution?

  I suggest you for this visit provided Microsoft article below and check if the problem is resolved.

  Resources for the resolution of the printer in Windows XP problems
  http://support.Microsoft.com/kb/308028

  Advanced Troubleshooting for when you cannot print in Windows XP
  http://support.Microsoft.com/kb/314085/en-us

  To reduce the resolution of your printer, you can visit this below article provided with the title "decrease your printer resolution.

  How to troubleshoot issues that you may experience when you try to print to a local printer by using Office programs in Windows XP
  http://support.Microsoft.com/kb/870622

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• HP deskjet 4500 on 8 64-bit windows that uses to accelerate to control printing.

  HP deskjet 4500 on 8 64-bit windows that uses to accelerate to control printing. Driver jobs to be printed just pc, but not when it is used with quicken to print voucher cheques. Also try to get the no wireless/bluetooth set up.

  @Cupids_Cowgirl, you will need to install a different driver such as the 990 c desk jet driver.

  You can follow this thread Shane.

• Change the print resolution 300 IDPS will result in lower quality?

  Hello. I have a small question for the printing resolution. I have an image of the size of the 93 "x 141" at 72 DPI resolution. I can change this picture of this size:

  34 "x 23" to 300 DPI

  In Photoshop, I see the selection of the size of the Image and is only there where I would like to change the size and the resolution I want? If I change the size of the size and resolution (93 "x 141" at 72 dpi ) original, it is always good for printing?

  Thanks for the tips!

  What matters is the size in pixels. Two formats that you displayed have roughly the same pixel dimension. At this resolution, you shouldn't have a problem with the quality.

• OfficeJet pro 8600: not possible to change the scanning of the Panel of the printer resolution settings

  With my Officejet pro 8600, there is no possibility to change the scanning resolution settings when you are working in the control panel of the printer (not present button to touch) when I want to scan to the computer, while in the manual it is mentioned that, after pressing the Document Type, it should be possible to reach the resolution to change the resolution of the scan setting. On the other hand, when the scan to a memory card the button change the resolution settings is present.

  Sometimes for the scanning of all computers to select (winXP SP3 installed on it). The HP printing software is installed on all computers and manage digitization to the computer is turned on. It is possible to change the resolution settings when using my computer with the HP printing software, but as I said not in the use of the printer.

  Thank you to help you solve the problem!

  Hey mk75053,

  Scanning to memory card has the parameters of resolution through the front because that is the only way for the device perform this type of analysis.  However, to change the resolution settings for the Scan of the computer, one will have to perform scans through the software installed on the PC.

  I have all three types of 8600 models where I am located (base, more high quality) and of all printers simply ask to start the analysis after selecting the scan type.

  I hope this helps.

• HP Officejet 6000 only print left side of controls. prints everything well.

  HP Officejet 6000 printer, system is Windows7. We use an insurance agency software and I am trying to print checks and the printer only prints the left side of the check and heel.  The software is ok because I can print checks very well of our generalization printer that uses the entire office.  I can print emails, documents, etc. of the Officejet and they print the entire page.  It's just the checks that print weird.  This has even puzzled IT society.  I tried the HP print and Scan Doctor thing, and he said that everything is fine.

  Any suggestions?

  Thank you!!

  I'm back in business now! Print controls very well. We all remote on a server and I got the printer installed on my desktop, but not inside the server, and I don't even think it.

  Thanks for your help!

• Cannot control printer HP 6510 directly from the computer

  I use the HP - 6510 B222a printer and used to be able to control all functions directly from the computer.  All options would appear in a window allowing me to select an assignment (printing, scanning, etc.).  All of a sudden, this option disappeared and now I can only control functions of the printer from the small screen on the printer itself.  Can someone help me with this problem?  I wish I could go back to control everything directly from the computer.  In addition, there is no way to determine the levels of ink on the computer screen.  Thanks for your help.

  Hello

  Reinstall the full feature software and driver on your computer can help. You can download from the following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?CC=au&LC=en&DLC=en&product=5058336

  (Note: B222a and B221a use the same driver).

  Kind regards.

• XSD file control printing

  Hi all
  
  I have an obligation to provide a file for print control for my client to the XSD format, a file for each report that you created.
  
  After studying at length I have not found a way to do this. I can make it appear different output formats when I schedule a report but I do not get an XML or XSD type.
  
  Anyone know where I can find a resource to show how I can create these files on the BEEP? I have already researched the w3schools site & have a handle on what it should be, but can't find anything on the implementation through BIP.
  
  Thank you.

  It's my first thought:
  It will not be perfect 100% but will give you almost the full xsd you need.
  I used XMLPAD (open source). It can create a XSD based on an XML file. Yes, treat
  Manual no automatic interaction with BEEP. Unless someone else has a better idea.

  see you soon
  Jorge

• HP Officejet 6500 All - in - One 709 a printhead printer resolution

  I want to thank Bob Headrick for his suggestion to soak the print head in warm water for 10 minutes.  It was a fantastic idea.  It does not solve the problem with my printer.

  I'm glad that I could help him.  For others looking for the solution for black not printing on the Officejet 6500 a, see the document here.  (Be sure to check the events on solution 6.)  If this does not resolve the problem then soak the printhead as shown in this post can help.

• printing resolution

  Hi Im using laserjet p1102w. is it possible to set the parameters of the printer to fastres 300? The options available are only currently 600 and 1200.

  Thank you.

  No, wuser, there is not a way to change the parameter fastres to 300, you're just the options available only to are 1200 and 600 on this printer.

  I hope this information is useful!

• Desktop connection remote - software to control print works not properly

  Hello everyone, I'm having some difficulty in finding a solution to a very specific problem of remote desktop. For starters, the computer I can access as well as the laptop that I use to access is both running Windows 7 Pro. Also, I log in with an administrator account.

  When "check printer Designer" of in Quickbooks, Checksoft software (who initially installed the printer "check Designer") is supposed to automatically open and I would like to choose a design of check printing. I am able to do this very well when you go to the local computer, so I'm a bit puzzled. Printers/programs not have the ability to open other programs in the Office remotely?

  Hello

  The TechNet forum would be more appropriate for the problem you are experiencing. Check out the link and post your query:

  https://TechNet.Microsoft.com/en-us/WindowsServer/ee236407.aspx

• I can control printing with ADE?

  I have a book in the format of the ADE. It has all the print permissions.

  Some settings of the printer I use, the document will be printed on both sides, allows to reverse the paper on the side, I don't want (so backwards is backwards) and does not print page numbers.

  Is it possible to check these results?

  You can print the document format which included the creation of the eBook.

• Why can't I enter a print resolution?

  So I don't print many large prints. I have a good offer to hang some large prints on screen though and I will do a few not dear costco of 20 x 30. I shoot with a Canon 6 d. 240 DPI. When I export these images on my mac to download at costco, should I leave the Res to 240ppi in the export area? I know a lot of people said 300 DPI no ppi, and I can't always grasp while it is still important. I read this isn't, but I also read if you export at costco 240 suréchantillonne 300 place lightrooms sampling is far better. Can someone finally resolve this confusion for me?

  > And now I'm confused again. Why would I want high-end? Site Web Costcos says expressly that the ideal for 20 x 30 is 3000 x 4500 to 150dpi. UGG, it is hard.

  They want probably just to balance their bandwidth to download a little and stop people from sending large files. You get perfectly acceptable prints by not upscaling and not something special and just their transmit an export to sRGB jpeg of your file. My instructions were more for eking out the last bit of quality (subjective). Impression of sharpness really makes a very visible difference as does using the good printing profile. In my opinion a bit upscaling and then impression of sharpness seems better than the impression of sharpness to the size of the native image, but I think that opinions may differ on this. The profile is very important in my opinion, because without it prints Costco going darker and more hip upward in the shadows you see on your screen. If you care about the details of shadow a lot you may prefer a more percussive than sending sRGB contrast shadow will give you. It can make your feeling all too dark however.

• Sizing of the images of several resolutions to print on a page of a resolution

  Maybe it's a basic question of Photoshop that betrays my lack of experience with the digital workspace, but I would like to know how to draw multiple images of different resolutions on a 300 ppi page, intended to be printed.

  I have three images: a 300 ppi, 3 x 4 inches, another is 4 x 5 inch, 900 DPI and a third is 4 x 5 inches, 600 dpi.

  I created a single page that is 300 ppi, 8 x 10 inches. My images will be adapted according to the physical size. But when I drop my 600 dpi and ppi 900 images in this page, they explode at twice and three times the space, spoiling my efforts to put them. Similarly, if I cut the ppi on images greater than 300 DPI, they explode as well.

  The only possible option I think that might work is automatic Resample/bicubic. But wouldn't that reduce the quality of the image?

  Thank you!

  An image file is a single file, no matter how many layers and images and sizes of pictures in there is that a single resolution than one resolution that all layers and images have the same resolution, the current resolution set in the document or the file setting.

  You can process the image file and save the files that have different resolution and different image of an open image size.  You would set something like that using the Image Processor Pro Script Photoshop plug-in that is available free on the Web.

  A printed page can have multiple images of different sizes to this topic but all images on the page have the same pixel resolution. They're just a different number of pixels. Larger images are more pixels then small images on the page.

  It's easy to make a layout.  Do your layout and size of your images for your page layout.

  Photo Collage Toolkit

  Scripts for Photoshop is powerful and I think that this package demonstrates this a video showing a collage of 5 model PSD image fills with images:

  The package includes four simple rules to follow to make Photo Collage Template PSD files so they will be compatible with my Photoshop scripts.

  1. Models of photo collage for the desired print size - width and height of the size and DPI print resolution.
  2. Photo collage templates must have a background layer in Photoshop. The content of this layer can be anything.
  3. Photo collage templates must have alpha channels named "Picture 1", "Picture 2"... "Picture n".
  4. Photo collage templates layers above the background layers must provide transparent areas to reveal the images which will be placed below them.

  There are fifteen scripts in this package, they provide the following functions:

  1. HelpPhotoCollageToolkit.jsx - online help
  2. TestCollageTemplate.jsx - used to test a model of Collage of Photo while you're doing it with Photoshop.
  3. CollageTemplateBuilder.jsx - can build models that are compatible with this toolkit scripts.
  4. LayerToAlphaChan.jsx - used to convert a stack of the Prototype Image layers in a document template.
  5. InteractivePopulateCollage.jsx - used to fill interactively model Any Photo Collage. Offers more user control insert images and text.
  6. ReplaceCollageImage.jsx - allows to replace an object layer dynamic image collage populated with another image resized and positioned correctly.
  7. ChangeTextSize.jsx - this script can be used to change the size of text Image stamps when the size used by the filling did not work well.
  8. PopulateCollageTemplate.jsx - used to fill a Photo Collage template and leave the populated copy automatically opened in Photoshop.
  9. BatchOneImageCollage.jsx - used for the models automatically batch fill Collage that have only a single image inserted. The Collage or picture may be stamped with the text.
  10. BatchMultiImageCollage.jsx - used to model automatically batch fill any Photo Collage with images in an image source folder. Easier to use than the interactive script. Recorded collages can be twisted.
  11. PasteImageRoll.jsx - paste Images into a document to print on roll paper.
  12. BatchPicturePackage.jsx - used to model automatically batch fill any Photo Collage with an image in the image source folder.  Rotation of images for a better fit.
  13. BatchPicturePackageNoRotate.jsx - used to model automatically batch fill any Photo Collage with an image in the image source folder.
  14. PopulatePicturePackage.jsx - used to fill a Photo Collage fill with the same single image model and leave the populated copy automatically opened in Photoshop.
  15. PCTpreferences.jsx - edit this file to customize Collage fill preset scripts and add your own layer styles.

  Documentation and examples

• Printer control app v 2.1

  Printer 210 scanned several times the iPhone 5 v 6.0.2 but then failed to get the scanning or in copy to highlight from home screen. Available printer. Any suggestions? Thank you

  I turned off the printer and turn it on again, app control printer closed and restarted the printer control application and scan and copy can now be selected. I'll study a little more and a report on this thread.