XSD file control printing

Similar Questions

• cannot print or delete files to print

  I chose subject to printing, click on print, no result.

  Go to the Control Panel, choose printer, message says it is printing, it will stay that way without result.

  Try to delete files to print, the message indicates the deletion without result

  Hello

  1. What is the brand and model of the printer?
  2. don't you make changes to the computer before the show?
  3. what operating system is installed on the computer?
  

  I suggest you try the steps from the following links:

  The new status of the printer is "offline" after you remove a print queue and then restart a Windows computer
  http://support.Microsoft.com/kb/2027593#LetMeFixItMyselfAlways

  How to cancel printing or to delete a print job that is stuck in the print queue in Windows XP
  http://support.Microsoft.com/kb/946737

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7

  Additional information:
  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• 'PC' is not set up to establish a connection on port "file and printer sharing (SMB)" with this computer - I get this after enabling access to public folders and then trying to access (another pc on the network cannot connect to this pc but see).

  • Tried to reconfigure the firewall
  • Tried to change files and printers, sharing options
  • Restarted other computers trying to connect to my public folder
  • Tried to adjust the network discovery
  • Do all computers on the network among the same workgroup
  • I can access public folders from the other computer and their content
  • Other computers on my network, in my workgroup can see my public folders, and users, but cannot access it.
  • Other computers can see my computer, but can not access: error code: 0 x 80070035.

  Can't access: 'Public' and 'Users' in the title:

  -Network
  MyName-PC

  Please don't give me that: "If you try to connect to another computer, make sure that this computer is on, that you have enabled file and printer sharing on both computers, and file and printer sharing can communicate through your firewall." Because I seek NOT to connect to another computer... I want to just access MY Public folder and the users folder and eventually allow others to access also.

  Hi Katmandu774,

   

  Welcome to Microsoft Answers Forums.

  The Public folder is a convenient way to share files that are stored on your computer. You can share files in this folder with other people using the same computer and with people using other computers on the same network. Any file or folder you put in the folder Public is automatically shared with the people who have access to your Public folder.

  If you are not on a domain, you can limit network access to the Public folder so that people with a user account and password for this computer. To do this, turn on sharing protected by password.

  1. Open the network and sharing Center by clicking the Start button, clicking Control Panel, click network and Internet, click network and sharing Center.
  2. Click the arrow next to password protected sharing, and then click one of the following options:

  ·         Turn on password protected sharing

  ·         Turn off password protected sharing

  1. Click apply. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To control the level of access to the Public folder

   

  1. Open the network and sharing Center by clicking the Start button, clicking Control Panel, click network and Internet, click network and sharing Center.
  2. Click the arrow next to public folder sharing, and then click one of the following options:

  ·         Turn on sharing so anyone with network access can open files

  ·         Turn on sharing so anyone with network access can open, change and create files

  ·         Turn off sharing (people logged on to this computer can still access this folder)

  1. Click apply. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Also, make sure you add everyone to the public folder and give the necessary permissions to access it.

  Sharing files with the Public folder

  http://Windows.Microsoft.com/en-us/Windows-Vista/sharing-files-with-the-public-folder

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is it possible to set up a PDF file to print out a copy and one copy?

  I work for an organization where we organize different types of successive elections. To this end, we want to send newsletters in PDF format the files attached to an email. But to avoid fraud, it will be necessary to set up the PDF file so that it will only allow one printing file. Is this possible? And if yes: How do we proceed?

  I am aware that the Acrobat security settings allow you to set up password protection, and after that, you can determine weather the file should print "in full" or only allow printing LoRes. But the fact is there to limit the number of prints allowed from specific file - in this case to a feeling and a feeling only. Any suggestions... ?

  No, not possible. How would it stop - if it was stored in the file, then make a copy of the file before opening it would start from scratch. Many printers can also do a reprint, or change the number of copies of the control panel. You would need a much more robust system to prevent fraud (such as anti-theft ballot papers - but then, it is therefore more a secret ballot).

• Satellite A100 - 02 M: cannot open the local area network to share files and printer - LAN Unplugged

  I have an office of another manufacturer which was connected by a wireless network via a Belkin router for a laptop another manufacturers - both running XP.

  I have now replaced the other laptop with a laptop Toshiba Satellite A100 - 02 M under Vista Home Premium. While I can still access the Internet from both machines, I can't open the LAN to share files and printers. The laptop shows 'LAN Unplugged' all the time. Any ideas would be accepted with gratitude.

  Ray Freeman

  Hello

  I have no general solution, but I'll try to give some advice solution;
  If you want to connect laptop with LAN cable both please make sure that you use a crossover ethernet cable.
  In addition, check if the network card is properly recognized in Device Manager.

  You could try updating the LAN driver and remove the NIC in Device Manager to update the installed driver.
  After restarting again the operating system should recognize the new (Lan) device and should install it automatically.

  I also studied a bit in this forum and found a similar thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=14852&MessageID=54037

  Check the proposals contained in this message.

  By the way; Microsoft provides a very useful page on Vista and how to configure the network, the file and printer sharing and troubleshooting
  http://windowshelp.Microsoft.com/Windows/en-us/networking.mspx

• How, please, directory of files to print, or doing screen print or transfer to Excel so I can leave with print?

  How, please, directory of files to print, or doing screen print or transfer to Excel so I can leave with print? Windows XP

  There are various ways to accomplish this, but the easier no doubt is to use the (free) Karen's directory printer .

• XP Pro SP 3 firewall blocking UDP 137 and 138 even though exception "File and Print sharing" is selected

  I am running XP Pro SP 3 on a working group. I'm trying to access the files from a Windows 7 machine on the same workgroup. But the XP firewall blocking UDP 137 and 138 even though exception "File and Print sharing" is selected. When I disable the XP firewall, all right.

  Here are a few entries in the firewall exception log file:

  2012-06-01 09:53:25 DROP UDP 192.168.2.190 192.168.2.255 137 137 78 - RECEIVE
  2012-06-01 09:53:26 DROP UDP 192.168.2.190 192.168.2.255 137 137 78 - RECEIVE
  2012-06-01 09:53:27 DROP UDP 192.168.2.2 192.168.2.255 138 138 202 - RECEIVE
  2012-06-01 09:53:28 DROP UDP 192.168.2.190 192.168.2.255 137 137 78 - RECEIVE
  2012-06-01 09:53:28 DROP UDP 192.168.2.190 192.168.2.255 137 137 78 - RECEIVE
  2012-06-01 09:53:29 DROP UDP 192.168.2.11 192.168.2.255 138 138 202 - RECEIVE

  I did some research on another site, and I came up with the FIX for this issue. It has to do with the node XP somehow getting ready to type "Peer-to-peer". I applied the fix in this article:

  http://support.Microsoft.com/kb/903267

  and the problem is now solved.

  Please come back and let everyone know how you fixed the end!

  However, the fact that this has happened and you don't know how concerned me (if it was my machine).

  Here's what I propose for extra cleaning:

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

• Cannot file or print share on LAN

  I have a home network with a desk, a laptop and a linksys WRT54G Router.  The laptop is wireless.  I can no longer share file and print service from the office with the laptop.  I can access internet from both PC.  I don't know of any change that would have caused this.  From the desktop, I can ping the laptop but cannot ping the desktop from the laptop.  I can ping from the laptop to the router but cannot ping the router's Office.  All the IPS, gateway and subnet mask are correctly defined.  I restarted the TCP stack on both computers.  Sharing files and printing worked until about a week ago. I lived the troubleshooting on the Microsoft site.  Help!

  This can help, if you take the time to respond accurately to questions: http://winhlp.com/wxnet.htm

• I'm unable to set up file and printer between my laptop and desktop sharing. Both are Windows Vista.

  original title: file and printer sharing problem

  I can't set up file and printer between my laptop and desktop sharing, both running Vista Home Premium.  The printer is connected to the desktop computer that is connected to the router.  The laptop is wireless.  In network and sharing center when I do a "view full map", both computers show, but one that I'm not on (either way) is indicated by a line broken instead of solid, and I don't see any info on it on

  Hello

  What exactly happens when you click the icon of the computer on the network map? You get the error message?

  If possible after return the screenshot of the network card that could help us help you better.

  See the bottom of the articles that might help you resolve this problem.

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Troubleshoot file and printer sharing

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-file-and-printer-sharing

  File and printer sharing: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/file-and-printer-sharing-frequently-asked-questions

  Use the network adapter to manage and troubleshoot networked devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/use-network-map-to-manage-and-troubleshoot-networked-devices-from-Windows-Vista-inside-out

• Error 0 x 80070035 "[name of the PC] is not configured to establish a connection on Port"File and Printer sharing (SMB)"on this computer".

  Original title: "home network".

  0 x 80070035 "[name of the PC] is not configured to establish a connection on Port"File and Printer sharing (SMB)"on this computer".

  That's what I get on my ThinkPad when I try to do the networking. I placed all the parameters correctly: all 3 of my computers are set the same. 2 workstations work perfectly. They can even see the laptop but not to open all files. The laptop can, open same network t itself file. But he can see the whole of the network (including a printer, is told by the way). I, ve gone through all parameters twice. I've even set the C drives to share via the menus of context on each computer. I have visited many forums with none even come close to this problem (they all will tell you how to set the network parameters or they get very technical and over my head).

  I tried with & without a firewall.

  No password.

  I use a wired network.

  Laptop & 1 desktop computer running vista - 1 desktop computer running xp.

  They have all the latest service packs ms & udates.

  Any help will be appreciated.

  These files can be opened by norton or lenovo network setting apps. The settings do not work only in the application of network of vista. Nor can I work norton or lenovo from other computers.

  PS how can I ensure these settings effect may just lan and do not extend to the internet?

  Thank you bb

  I tried new drivers & returned through sharing & permissions, according to Jack, but he was not good. At the level of experience of my computer I can miss something obvious, but I doubt it because I've been very careful in following the instructions. I am experencing other problems with this laptop as well and I'll just get all. I am planing to get back anyway, that's why I needed network. I wanted to Exchange files over the network to avoid having to ' wait & swap "usb drives. Thanks anyway. Thank you BB bb

• File and Printer Sharing for Microsoft Networks-problem

  Hi all
  I use pc (vista HP 32 bit) sharing-i ' ts works great except one problem:
  what I do, the check mark of V in "sharing files and printers for Microsoft networks".
  is disabled / be empty after each reboot of the pc - and I have to manually check and click OK again.
  How can I fix this and make "File and printer sharing for Microsoft networks" checked permanently?

  (I use the network server private & computer browser Services work. I do not use the password protected sharing)

  Thank you

  http://www.Vistax64.com/attachments/tutorials/2609d1232212061t-file-sharing-turn-off-network_connection_properties.jpg

  problem solved:

  It was Lenovo access connection network for lack of security settings.

  Thank you

• Cannot connect two computers windows 7 for the file and printer sharing

  Original title: trying to share files and printers on two computers and seem to have a firewall problem! Windows 7 is on both computers.

  I went through the setup procedures, I think, but still actually will not connect.

  Hello

  ·        How are you trying to share files and printer through the group home or workgroup?

  ·        What is put in place procedures have you tried?

  ·        How do you know that there is a problem with the firewall?

   

  Step 1:

  Temporarily, you can try disabling the firewall on the system and check. See the article mentioned below.

  Firewall: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/firewall-frequently-asked-questions

  I also suggest you to disable the security software and check if you are able to establish a connection between the two systems.

  Note: Activate the wall and fire safety software once the scans.

   

  Step 2:

  I suggest you follow the steps mentioned in the articles below.

  File and printer sharing: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/file-and-printer-sharing-frequently-asked-questions

  Share files with anyone

  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• cannot depend on a file of discovery and sharing files and printing

  I know this has been posted before but I can't find the right answer, I tried all of the suggestions I've found.  I still can't file discovery and sharing files and printing to stay on, I use Norton firewall and I always turn off no luck.  Have you checked all the services which are expected to be running and that they have tried the suggestion to try it in safe mode still nothing did nothing a sfc/scannow.  I am using windows 7 pro 32 bit summer trying to figure this out for a week.  I'm trying to do not have to reinstall windows.

  Thanks for any help

  I know this has been posted before but I can't find the right answer, I tried all of the suggestions I've found.  I still can't file discovery and sharing files and printing to stay on, I use Norton firewall and I always turn off no luck.  Have you checked all the services which are expected to be running and that they have tried the suggestion to try it in safe mode still nothing did nothing a sfc/scannow.  I am using windows 7 pro 32 bit summer trying to figure this out for a week.  I'm trying to do not have to reinstall windows.

  Thanks for any help

  Already responded to check if this may correct your answer

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/cant-turn-on-my-network-discovery-and-file-and/9e766e4b-3eb0-475f-B680-6bd75fbd3d2a

• Cannot connect to the local file and print when the domain controller is not available because the network connection

  Hi all
  Having problems for local users, connection to a file and print server in one of my satellite offices.
  When my t1 connection is disrupted (problem of local carrier) my users when the connection is down to connect to the file room and print and always have access to their files and the local printer.
  The domain controller is off site in my main office.
  Environment:
  All local desktop clients are windows machines 7.
  Printing and local file is a windows 2003 server.
  DC is window 2008
  Note that we recently changed all 2003 to all domain controllers the PDC 2008, suspect that it may cause the problem, but just cannot know where it track.
  Any help or thoughts would be appreciated.
  Thank you

  Hello trj'hwma,

  Thank you for the question!

  It's discouraging to know that have problems you with the local file and print. As I understand well you cannot connect to the local file and print when the domain controller is not available because the network connection.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  Windows 7 IT Pro category

  Answer to us if you have problems with the local files and print or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• Sharing files and printing turn off the coast

  I have a thinkpad SL510 with Win Pro installed and for some reason, the file and print sharing checkbox for the Ethernet card turns off after that I have restart or restart the computer... What you have to do to prevent this?

  Thanks Andy... in fact I found this response during a search in an another forem to Lenovo for the T60... but I appreciate it... This has been really puzzled for a while now, since I didn't know that this option was in the login to... but so far seems to have done the trick.