Controller Base device system &; network missing on the evolution of the OS
Hi, I changed my OS on my ProBook 6460 b to Win7 x 64 that was previously x 32
Hardware ID; Network controller
PCI\VEN_8086 & DEV_0085 & SUBSYS_13118086 & REV_34
PCI\VEN_8086 & DEV_0085 & SUBSYS_13118086
PCI\VEN_8086 & DEV_0085 & CC_028000
PCI\VEN_8086 & DEV_0085 & CC_0280
Base system device
PCI\VEN_197B & DEV_2392 & SUBSYS_161D103C & REV_30
PCI\VEN_197B & DEV_2392 & SUBSYS_161D103C
PCI\VEN_197B & DEV_2392 & CC_088000
PCI\VEN_197B & DEV_2392 & CC_0880
Thank you in advance, I tried a few drivers and windows update but it doesn't seem to work for me.
Kind regards
-AayushK
Hello:
You need these two drivers...
Tags: Notebooks
Similar Questions
-
Base device system (missing in the scanning device manager) _
Last week I upgraded my laptop from Windows XP to Windows 7 Enterprise. I use IBM Lenovo 3000/n100 laptop model. After installing the operating system and windows udpate alll my required drivers and updates and patches installed correctly. But by checking Device Manager there are 2 errors showing for not able to get the drivers. Those who are "Base system device". While checking that the entry, I'm not able to get exactly what driver is missing. I tried on many ways to update through Windows Update and update of Lenovo, but I'm not able to get / set what driver is missing. With this mail I ask that to provide me a tool I can able to get the driver for installation details.
Concerning
Srinivasan R
Hi Srini,
These hardware IDS are for the memory card reader. It seems that Lenovo doesn't support Windows 7 on this computer, but you can try the Vista drivers. Here is a link. http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-67298
Thank you
Chris -
Unknown device on network adapter between the laptop and the wireless router
I am running windows 7 64 bit on a laptop computer connected wireless to the router and internet. The router is Linksys WRT160N connected to the internet. The map of the network, there is a question mark device unknown between the laptop and the router. However, I still have access to the internet. In terms of network, if I hover over the laptop, it does not show an IP address. It only shows the name of the computer and its MAC address. Any help would be appreciated.
Solved my problem. I checked the button of the IPv6 protocol in the properties of a network connection on the laptop, and now I can see it's the IP address and the unknown device has been replaced by a switch and hub which is part of the router. I do not uncheck the button IPV4. I'm guessing that it is a bug in Windows 7 that you need to cut of ipV6 Protocol when you have a Win XP computer on the network if you want to see a map of own network. As I said before, everything worked before, so this seems to be a cosmetic fix only. I see that my shared files on the XP computer appear faster after a reboot.
-
15 - r045TX: controller / PCI device Driver networks
I'm having a problem with controller network & PCI device Drivers
I get a msg tat - the drivers for this device are not installed
When I looked up the solution install the airline pilot, I failed
so please give me the solution for issues tis.
PRODUCT NO.: K5B79PA #ACJ
SERIES: [Moderator edited serial number]
MODEL: 15-r045TX
OS: WIN 7(64 BIT)
Thank you...
Hello:
You need this driver for the pci device...
You need the driver for the wireless card...
http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_131223_1
You also need this bluetooth driver for this card...
http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_130390_1
-
System Restore missing on the list of system tools
Original title: System Restore lost
I have the detector of max secure spyware on my system, he pointed out that my system restore is false and deleted the shortcut of this program. I restored the research program and found. Research says the program should be in system tools but is does not appear here. I ran system restore and it can not restore to an earlier date, it would therefore appear to be fake, I need to reload the system restore. Can you help me in this matter
Support number: 1163656637
Hi don evetts,.
1. did you of recent changes on the computer?
2. what happens when you do the system restore?
3. you receive an error message?
It is possible that some virus or malware infected system restore shortcut and removed.
Method 1
Refer to the article below and try the steps mentioned, check if it helps.
Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP
http://support.Microsoft.com/kb/302796
Method 2
If the previous step fails, then it is possible that some third-party programs installed on the computer is causing system restore not working properly.
I suggest that you configure the computer in a clean boot state and check if it helps.
To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See section to learn more about how to clean boot.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
1. click on Start , then click run.
2. type msconfig , then click OK.
The System Configuration utility dialog box appears.3. click on the general tab, click Normal Startup - load all device drivers and services , and then click OK.
4. When you are prompted, click restart to restart the computer.
Method 3
I would also say that you run a virus on the computer scan to remove any malware or virus infection.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
You can also use Microsoft Security databases to scan your computer
-
System icons missing in the taskbar
On my laptop, next to which the time is specified, must be 3 different icons. Volume, network and power. I don't know what happened, but these icons are now gone. I went in the taskbar and Start Menu properties to get them back, but under the system icons, the only selectable icon is time. The other three are grayed out and I can't click on it.
What happened to my computer? and how to fix it?
Hello G0lDchymera,
Thank you for using the Microsoft answers Forum
Activate the system via Local Group Policy Editor icons
- Run GPedit.msc to start local Group Policy Editor.
- Expand the tree and access Configuration user-> templates-> Start Menu and taskbar to administration.
- Change the status value the value to Disable or not configured for the following group policies allow the display or the display of the icon in the notification area.
Clock: Remove clock from the system notification area
Volume: Remove the volume control icon
Network: Remove the network icon
Power (battery) icon: remove the battery meter- Close the local Group Policy Editor.
- Restart Explorer, Log off and log back or restart the computer for the changes to take effect.
If the step above does not work, then I have another option below in the form of an article that also offers a fix for this problem.
System icons do not appear in the tray on a Windows Vista-based computer, you must restart the computer
http://support.Microsoft.com/kb/940267
Judd
Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think. -
WSCAPI system file missing and the Security Center will be not turn on.
-Micorsoft Fix It Center report WSCAPI system file does not exist. In addition, Windows security system is off and will not turn on. Are these related issues? What can be done to solve these problems? Fix - It Center could not fix and offered no solution.
Hello
As Windows was preinstalled on your computer, you must contact the Original equipment manufacturer (OEM) to reinstall of Vista drive. I suggest to fix vista problems, before you start the upgrade to Windows 7 if it is not upgrade may freeze or you will receive errors.
After reinstall of Vista drive, you can perform SFC scan offline using the disc. Follow the steps below to do so.
a. Insert the installation disc.
b. restart your computer.
c. click on the Start button, click the arrow next to the button lock and then click on restart.
d. If you are prompted, press any key to start Windows from the installation disc.
Note:
If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.
e. Select your language settings and then click Next.
f. click on repair your computer.
g. Select the operating system you want to repair, and then click Next.
h. in the System Recovery Options menu, select command prompt
i. type ' sfc/scannow' and check.
You can also do the Startup Repair after receiving drive, the detailed procedure is suggested below:
http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions
I hope this helps!
-
2000-219DX HP laptop: Ethernet controller, network controller + PCI device problems
Hi ~!
I got tired of finding solution to it, or let's say 3 problems in one.
I reformat this laptop because of its slow and late development status.
When I finished reformatting, it is the wifi button does not work and remained orange light, which means it's off.
e I'v tried to plug it into the router via a cable (I forgot what it's called), then stil it doesn't work...
I also checked Device Manager and found them with "!" exclamation.
Problem controller Ethernet controller, PCI device and network.
I found this will never work...
Now, I did find the solution through the internet and found some but that did not work...
I need help. !
name of product: notebook PC HP 2000-219DX
OS: windows 7 Home premium
Hope you can help me... I really enjoyed that.
-Marie
Hello:
These are the drivers that you need for these devices in the order you have them posted in the topic...
This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.
File name: sp52421.exe
This package contains the installation package driver for the controller LAN Realtek RTL8188CE wireless in the notebook models and operating systems.
File name: sp52212.exe
This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.
File name: sp52186.exe
-
Miss me the usb 3.0 for hp Pavilion 2251ev g7 host controller drivers
in Device Manager I ' miss me the sm bus drivers usb and bus controller controller (x 2) I'm on windows 7 ultimate x 64
the hardware id is like this: pci ven_1022 & dev_7812 subsys_184b103c & rev_14
Help, please! I AM IN DESPAIR...
Hello:
No need to be in despair...
Download and install the first file listed (AMD chipset driver).
http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2
-
I started getting the following error message:
Log name: SystemSource: atapiDate: 16/03/2013 18:36:37Event ID: 11Task category: noLevel: errorKeywords: ClassicUser: n/aComputer: Sanja-PCDescription:The driver has detected an error of the controller on \Device\Ide\IdePort4.The event XML:11 2 0 0 x 80000000000000 169902 System Sanja-PC \Device\Ide\IdePort40000100001000000000000000B0004C002000000850100C00000000000000000000000000000000003000000000000000000000004100000 The last time I had this error was for malware using ESET secruit security check. During which I got like 11 errors with event ID 11 in the observer diary of events. Next, I had warnings of ntfs with event ID: 57:Log name: SystemSource: NtfsDate: 16/03/2013-17:24:11Event ID: 57Task category: (2)Level: WARNINGKeywords: ClassicUser: n/aComputer: Sanja-PCDescription:The system failed to flush the data in the transaction log. Corruption may occur.The event XML:57 3 2 0 x 80000000000000 169876 System Sanja-PC 0000000001000000020000003900048000000000850100C 000000000000000000000000000000000 The system works fine, no freezes or crashes, but I would like to know what is the cause, is it hardware or driver related?Hello
Thank you for contacting Microsoft Community.Since you don't face any problem while working, the system works very well. The error in the log occurred due to the error of the driver in this case. But immediately, Windows is taking measures to restore the driver, so that the system works very well. The journal entry is just a notification. During the scan, the higher the use of the disc, so the number of failures is likely to increase. It occurs even in situations where there is a transfer of files. -
Hello
I have a problem with a driver, I tried to download from the HP official website, but not of all the pilot succesfull installed on my laptop.
Missing driver is: network controller, PCI simple communication controller, unknown device
My laptop: HP Pavilion 14-v202tx with Win 7 64 - bit OS
Help me
Hello:
You need these drivers wireless and bluetooth...
Driver LAN wireless Broadcom
File name: sp69014.exe
Software and driver Broadcom Bluetooth 4.0
File name: sp66402.exe
ACPI\HPQ6007:
HP 3D DriveGuard Software
File name: sp67280.exe
-
Code 28 on the NIC, ethernet controller, Base system device
Hi This is my first post, I just installed windows 7 on a computer laptop Tosh A11 back and I have code 28 on the NIC, ethernet controller, peripheral system base and therefore cannot connect to the internet to download the updated windows drivers can help you?
There are many systems of Tecra A11, if your PC came with win7 preinstalled recovery discs would have installed the necessary drivers.
If it has not been provided with win7, or you only use the recovery discs, visit Tosh support and download the drivers for win7 on another PC, then transfer them to the PC to install, or via a memory stick
Unless you mean that your Tosh had a problem, that you thought a priest of maight reinstall
-
Controller USB is missing in the Device Manager list - how do I get it back?
After a recent update, I found that I could not see my USB/wrtieto. On the investigation, I found that the Universal Serial Bus controller does not appear in Device Manager. I tried to reinstall the system drivers, without success. I have nothing seems to wake up the USB controller.
Hi John8mm,
You tell us a little more about your system. What is the operating system and service pack level. To check your level of service pack, click the Start button, runand in the Run dialog box, type "Winver". If you have not already XP SP3 installed, I suggest that you download and install from the link provide below.
Windows XP SP3.
http://www.Microsoft.com/en-US/Download/details.aspx?ID=24
Please ignore the warning about downloading only being suitable for IT professionals and network facilities.
For more USB troubleshooting tips, please visit the link below.
http://support.Microsoft.com/kb/310575
If you need help, feel free to post back. Hope it will be useful.
-
Base system device driver is missing
Hello
I have a 5.0.3 Windows XP Virtual Machine VMWare fusion, where the Base system device driver is missing - displaying a yellow icon and causing the annoying new found hardware Wizzard to display at startup every time.
The hardware IDS are:
PCI\VEN_15AD & DEV_0740 & SUBSYS_074015AD & REV_10
PCI\VEN_15AD & DEV_0740 & SUBSYS_074015AD
PCI\VEN_15AD & DEV_0740 & CC_088000
PCI\VEN_15AD & DEV_0740 & CC_0880
I tried to reinstall several times the VMWare tools, no help. This virtual machine was originally on an earlier version of VMWare, which I copied on this PC once it has been updated to Fusion 5.0.
The vmx file is attached.
Thanks in advance for your help.
Kind regards
Paulo
You must uninstall completely, no repair facility install/upgrade, VMware Tools and then reboot and install VMware Tools. Have you done this yet?
-
Yellow brand - PCI Device' and 'Network controller' on the Satellite A100-787
There is a yellow question mark in Device Manager for a pilot called "PCI Device" and also for "Network controller" even if the network (LAN) connection is working well and all the other computer functions seem to work well.
What are these devices?
The second device appears to be a LAN or WLan card. You should check if one of these cards were not installed under network adapters.
The PCI device can be a card reader. Check this box too.But I really don't understand why these yellow exclamation points appear in Device Manager. I assume that you have installed all the drivers available. Did you?
Please check if some drivers were not installed.
If so, then download and install!
Maybe you are looking for
-
My C Satellite won't load Windows - error code 0xcoooooe9
Hello get a status error happen when the laptop is turned on. The error code is 0xcoooooe9, windows does not load upward and the tool does not work. Trying to get back to factory settings, but it crashed saying the partition cannot be created and was
-
using apple tv to stream xfinity wifi
-
Attempt to put files in a towel that have Cyrillic letters.
original title: error of Briefcase In the folder that I put in my towel, I have a few files with the name and the content using the Cyrillic letters.After I drag them to my towel, these files display not synchronized, the record indicates that needs
-
Server vs CRP EBS R12.2 UAT
Hi allEBS r12.2OEL 61. we have new servers of CRP and UAT of installation.2 we install all the required RPM based on the two servers based on the notes 1330701.13. after that, I cloned the instance of PROD on both servers of the CRP UAT.4. cloning wo
-
ESXi 6.0 by APC UPS shutdown
Dear community,According to specifications, APC, PCNS only works upwards to 5.5 VS. Someone has already tried with 6 VS? Or is there another way to stop free a host of 6 of ESXi through a UPS?Thank you and best regards,Jens Graven