Controller - question Source of export range

Similar Questions

• Question from TMS Export Directory

  Hi all

  I'm working on version 14.5 MSDS and I would like to export my file system directory, so I followed the section 'Contacts to export to a file' described in Cisco TMS Admin Guide 14.5:

  1 create a phone book.

  2. click on connect to this directory.
  3. Select the sources you want to export the contacts since then.
  4. for the Type of update for these sources, select Import to Cisco TMS or import to Cisco TMS and the source directory export.
  5. now select the base directory file source that you want to export.
  6. to update for this source Type, select Import to Cisco TMS and export toward the Source of the telephone directories.

  The problem is when the option choffeur to step 6, I found that I could not find 'Import to Cisco TMS and ExportSource telephone directories', only 'Import of TMS' or 'search only '? I don't know if it is to export the file and where can I find?

  As an attachment, you can find a screenshot.

  Thanks for your help.

  Sofiane

  Hi sofiane__

  I must say that it is more idiosyncratic and intuitive things I've met in a long time, although once you get your head around it, you can see the logic of programmers (although they could have made it real simple).

  You must have a SOURCE directory, which is a 'phonebook database file', then you must select that as the source within you, phone book and the value 'import and export '. All other sources of the telephone directory are defined to import into this directory...

  The exported CSV file will then appear on the MSDS Server (somewhere like "C:\Program Files (x 86) \TANDBERG\TMS\wwwTMS\data\ExternalSourceFiles") and is not the same has the file you may have used to configure the directory file-based in the first place.

  Hope this helps

  See you soon

  Chris

• Questions about the export of PDF with India CS5.5

  Hey all,.

  A few questions about the export to PDF of the most recent version of India.

  First of all, I noticed it seems to take much more time to access a PDF file. Any suggestions about how to speed up the process? It took 8 minutes to generate a PDF low resolution (for printing) of a document of 24pp with placed images and vector graphics. Wow, that's a long wait, especially for evidence.

  Second, the background task... If I get it will make this PDF of 8 minutes and then more work on the document, which is exactly in the PDF? Usually, I have save before making a PDF or printing. Thus, the latest version is saved which will be in the PDF?

  (Either incidentally, this ability to work on the doc while generating a PDF file seems kind of weird. Generally, we do a PDF for proofing, or even for printing, when any changes have been made and that everything is "final". Therefore, I see no advantage in being able to work on my document while it is making a PDF file, I am probably once your revisions for the moment. I must say that I like the progress bar that you get when you perform an interactive PDF, as you know that you can not work on the document when it is on the screen...)

  Thank you as always.

  Good, people. Wanted to just follow this and post my results. It turns out that the problem is somewhere in the Illustrator file. I never had the time to guess what work plan was the culprit. Other India files PDF files is transparent and not a lot of time.

  No resolution, unfortunately, just good to know that it is not all India files on my system. Phew!

  THANK YOU for your advice.

• Question about support export using predefined option 'Match Source - broadband'

  HI - looking for a few tips here:

  One of the first things I want to do after the shoot is to create a backup with all my usable images file (I'm shooting video air with the camera running all the time, so more most of my images is disposable). I would have thought that to preserve all the data/full resolution, etc. I should just export with option 'Match Source - broadband', but I am amazed as to how small the file size is proving to be. I shoot at 4K, so I'm expecting this option to export full 4K. But if I export 1080 p even this file ends up larger than the Source Match option. And compared to use export YouTube 4 K setting, the Option to Match Source is a fraction of the size. Then where all data goes? What will I lose? He applies a form of compression? And what is the best option to preserve the full resolution/data export?

  Thank you!

  Jacques

  I guess that 'source' = MP4 of origin off the camera files.

  "Source" in this case the resolution, frame rate, NOMINAL, etc..  It does not consider codecs and bitrates.

  What I want to do is made usable in MP4 pictures, as it comes off the camera without any loss.

  You can not.  H.264 is a codec.  If you want to keep the quality, you need a different codec, that which two I mentioned earlier.  If you're working in 4K, however, you are actually limited to UT as the only viable option for now, because the version of 4K of DNx is not yet implemented in the Adobe software.

• Question regd import/export feature of CUCM BAT

  Hello

  We have a production cluster CUCM 8.6 running.

  I was asked to create models of translation of 300-400.

  I see that I can not do this directly through bat. But I can't see the import/export option.

  We have 1000's of existing patterns of translation on our system.

  I have a small question about the import feature.

  A new import overwrites existing data in the database that contains the data in the import file or because the new data in the import file added to the existing data.

  If the import file has only the new models of translation, it will eliminate the existing patterns of translation in the system?

  I don't have a system of cucm lab to verify this behavior?

  Can you please help me on this query?

  Thank you

  Pete

  I often do and it's the only way to bulk add translation models. It removes all the reasons for translation it will only add/edit the translation model. If all the new models it will simply add your new entries.

• IP over different WAN, source routing ip range? [cisco 891]

  Hi all!

  Here I am again asking for help! :)

  Here's the goal: I want a set of computers to use a WAN and another using the other WAN based on the IP address range.

  I use a router cisco 891. Fastethernet0 is a WAN, GigabitEthernet8 is the other WAN and gigabitethernet 0 to 7 are 8 switch of the router ports.

  From now on, I have my two internet access works very well, each of them is connected to a WAN port on my router. I have no problem have all my computers using a WAN or the other, or even load balancing between them, but what I want is to fix some computers with internet access and the other computer to use other internet access.

  I don't know how to do this, I looked in the delivery by source IP address, but I don't really know how to do. I saw something on the basis of routing policy, but I can only apply these policies on incoming packets that I seem not to be able to apply these policies to one of the switch port of the router. I would need to use the WAN port to connect my incoming LAN in, but then I would not be enough WAN port for both of my internet connections.

  Internet gateway #1 is 172.26.2.254

  #2 connection gateway is 192.168.1.254

  Here is my current config:
  I understand why I have bad connection whith this config since it is load balancing between the road two default and send only one of my two wan according to the INVESTIGATION period, but I don't know what to do to say precilesy Beach, the beach of IP #2 and IP #1 to go go here.

   Cisco891(config)#do sh run Building configuration... Current configuration : 3833 bytes ! ! Last configuration change at 15:11:43 UTC Tue Oct 20 2015 by *********** ! NVRAM config last updated at 14:58:11 UTC Tue Oct 20 2015 by *************** ! NVRAM config last updated at 14:58:11 UTC Tue Oct 20 2015 by ************** version 15.3 service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname Cisco891 ! boot-start-marker boot-end-marker ! aqm-register-fnf ! enable secret 5 ************************/ enable password ************************ ! no aaa new-model ! ! ! ! ! ! ! ip dhcp excluded-address 172.26.1.1 172.26.1.49 ip dhcp excluded-address 172.26.1.100 172.26.1.254 ip dhcp excluded-address 10.10.20.1 10.10.20.49 ip dhcp excluded-address 10.10.20.100 10.10.20.254 ! ip dhcp pool vlan1pool network 172.26.1.0 255.255.255.0 default-router 172.26.1.254 dns-server 208.67.222.222 208.67.220.220 ! ! ! ip domain name lnc360.fr ip name-server 208.67.222.222 ip name-server 208.67.220.220 ip cef no ipv6 cef ! ! ! ! ! multilink bundle-name authenticated ! ! ! ! ! ! ! license udi pid C891F-K9 sn ******************************* ! ! username ******************** privilege 15 secret ************************************* ! ! ! ! ! no ip ftp passive ip ssh time-out 60 ip ssh logging events ip ssh version 2 ! ! ! ! ! ! ! ! ! ! interface BRI0 no ip address encapsulation hdlc shutdown isdn termination multidrop ! interface FastEthernet0 ip address 192.168.1.1 255.255.255.0 ip nat outside ip virtual-reassembly in duplex auto speed auto ! interface GigabitEthernet0 switchport mode trunk no ip address ! interface GigabitEthernet1 switchport mode trunk no ip address ! interface GigabitEthernet2 switchport mode trunk no ip address ! interface GigabitEthernet3 switchport mode trunk no ip address ! interface GigabitEthernet4 switchport mode trunk no ip address ! interface GigabitEthernet5 switchport mode trunk no ip address ! interface GigabitEthernet6 switchport mode trunk no ip address ! interface GigabitEthernet7 switchport mode trunk no ip address ! interface GigabitEthernet8 ip address 172.26.2.10 255.255.255.0 ip nat outside ip virtual-reassembly in duplex auto speed auto ! interface Vlan1 ip address 172.26.1.254 255.255.255.0 ip nat inside ip virtual-reassembly in ! interface Vlan2 ip address 10.10.10.254 255.255.255.0 ip nat inside ip virtual-reassembly in ! interface Async3 no ip address encapsulation slip ! ip forward-protocol nd ip http server ip http authentication local no ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ! ! ip nat inside source list LAN_PCs interface GigabitEthernet8 overload ip nat inside source list LAN_servers interface FastEthernet0 overload ip route 0.0.0.0 0.0.0.0 172.26.2.254 ip route 0.0.0.0 0.0.0.0 192.168.1.254 ! ip access-list extended LAN_PCs deny ip 172.26.1.0 0.0.0.31 any deny ip 172.26.1.112 0.0.0.15 any deny ip 172.26.1.240 0.0.0.15 any permit ip 172.26.1.0 0.0.0.255 any ip access-list extended LAN_servers permit ip 10.10.10.0 0.0.0.255 any permit ip 172.26.1.0 0.0.0.31 any permit ip 172.26.1.112 0.0.0.15 any permit ip 172.26.1.240 0.0.0.15 any ! ! ! control-plane ! ! ! mgcp behavior rsip-range tgcp-only mgcp behavior comedia-role none mgcp behavior comedia-check-media-src disable mgcp behavior comedia-sdp-force disable ! mgcp profile default ! ! ! ! ! line con 0 no modem enable line aux 0 line 3 modem InOut speed 115200 flowcontrol hardware line vty 0 4 privilege level 15 password 7 ****************************************** login local transport input ssh transport output ssh line vty 5 15 password 7 *********************************************** login local transport input telnet transport output telnet ! scheduler allocate 20000 1000 ntp update-calendar ntp server 0.europe.pool.ntp.org ! end

  Thank you!

  Hello

  Apply the ACB on the SVI strategy ' sof the VLAN

  int vlan 1
  intellectual property policy map route ACB

  int vlan 2
  intellectual property policy map route ACB

  RES

  Paul

• Question of PDF export

  Really like XD so far.  Simple but can create a little with the basic tools and love some of the features which are directed towards the models...

  Is there an easy way to resize a game of darts?  When I change the dimensions of a work plan, it crops the image.  I tried to bring together all the elements and using the corner anchor to the resize, but not all scales (e.g. the borders don't adjust).  I'm new to vector graphics, so maybe that I have this good feeling.  I create icons for an iOS app.  At 1 x, I need them to be 20 x 20 px.  But if I create work at 20 x 20 plans and someday need them to be a different size it is impossible to change the dimensions.  Appreciate someone saying that maybe this isn't a question/problem specific with XD but more due to the fact that I'm new to working with vector graphics.  I want to export to PDF and use them in the application and I can create them as work plans of 20 x 20 pixels, but it seems that it is lock me up in this size and curious to know if there is a workflow of people use that I'm missing, or a way to resize a work plan itself.

  Thank you

  Peter

  Hi pedz55.

  You can resize the artboard by selecting (clicking on the title of the artboard or double-click the artboard), then resizing. However, if I understand correctly, you want your vector assets for resize If you resize the Board graphic, right? It is a completely different matter.

  I think your best bet is to consolidate your icon on the artboard. You can then them resize but you want by resizing the group. Will you become probably still some problems with borders being the right size if you to scale in this way, you may need to adjust later.

  Here's an example of how I've resized:

  

  Hope that helps!

  -Elaine

• CS6: export "range of time markers" without defining in - entry / exit point or set the work area?

  Hello

  in CS6, I've defined several "range of markers of time" to get a better overview of my project. Now I want to export each range in a single video.

  The only way to do it is to create in - entry / exit points or the definition of the work area (which is the English translation of "Arbeitsbereichsleiste" (German),...?)?

  Or is it possible to set this selection through the established range of time markers? That would be the easiest way...

  Thank you, Carlos

  I don't believe it.  The markers are a few guides, really.  They do not control a lot.

• Questions about the export of the files (tab out, location of export file and preferred Format)

  Hello

  I exported just my first movie PrPro test.

  Three questions.

  1. I'm a little worried because before I exported it, no picture was visible in the tab out of the export settings panel.  I wanted to use to check beforehand that I had no black bars, but all that I had was a black screen, as seen immediately below:

  

  2. my sequence has been properly exported.  But where it has been exported to?  How can I learn where?

  3. Finally, I would like to present my film 100 trees, which hopefully completed by April 19, a handful of middle and high level film festivals.  I turned it in 1920 x 1080 24 p.  What export format would probably work for the largest percentage of film festivals?

  Thank you!

  Matt Dubuque

  Matt,

  I can't comment on # 2 and # 3.

  2.) exported the file will be located where you chose for the destination folder. If you did not note that, just go through the process to redo the export, but note the destination folder (should be a sticky, so that it won't change until you change), but do not go through the complete export - cancel just, once you see the destination folder. Otherwise, you can search your system for the name of the sequence, or anything that chose you as the name of the export file.

  3.) there is not one answer for this. I communicate with each festival and ask for them plug complete standard for presentations. They all have the same maybe, but you may need to make several exports, one for each festival. Let them tell you what they want. When you get their spec sheets, if you have any questions, come back to this thread and post their requirements, and someone will be able to help interpret the requirements.

  Good luck and good luck to the festivals!

  Hunt

• Question of PDF export - missing (not gel background question)

  Hello

  Currently, having some problems with the export to PDF from Indesign CS5. When I export the first page (which is based on a master page) the majority of the content gets cut - so it's pictures, colored boxes and stroke and a barcode. (Top image)

  When I cut the master page content and paste it on a standard page, then it prints out ok (Image down), but we cannot reasonably do it every time. It's not only in a single document that its happened - she has produced with many of our documents and on several computers.

  I have checked the forum and troubleshooting, have crossed and serves as the document level and ask any troubleshooting help. http://kb2.Adobe.com/CPS/499/cpsid_49998.html#main_DocumentLevel

  I have read the various messages about background jobs that is not the issue that it is actually export it and its fine.

  Have rebooted the machine, rechecked updates, checked if it is a damaged document (it's not from what I can tell)

  Tried to export without pictures (ignore the OPI) with the same results.

  Have checked the transpency question (that contain transparency but no results).

  So thinking that it must be something to do with master pages, but I have no idea what.

  We use an external plug in for barcodes for CS4, who does not work for CS5, so I removed the code bar to see if that was harming her, but again no luck.

  Just to confirm that we are currently running

  Adobe CS5 on our computers - we run all the updates for Adobe Acrobat Pro (9.4) and for the whole of CS5.

  Its running on iMac 2.4 GHz Intel Core 2 Duo, OS X 10.6.4

  Adobe CS4 was uninstalled and not written off so no interference there.

  Can someone help me out here or recommend something?

  Thanks in advance.

  

  

  Just looking through the release notes for the 7.0.3 updated and other bug fixes listed is "Images in a group on a master page of abandonment during the export in PDF format [2705316] *" which could mean you should update and try again.

• Simple (hopefully) newbie question on the Export model

  Entirely new to ODM - so please be gentle! - and you would really appreciate to help smart people.
  
  We use ODM (10 g) to make some predictive analytics (SVM). The question I have is:
  
  Once a model is 'built' and trained on historical data, can model that be exported to and used in another environment (external) Oracle (assuming of course that the data columns are equivalent)?
  
  Can you tell me if the model is exported as an ODM object - and so would require an instance of the ODM to the outside environment. Or, if it is exportable in the form of, say, a table of coefficients that may simply be questioned outside without needing an instance of ODM.
  
  I hope it's a clear explanation of what I'm trying to get to. thanks in advance.

  Hello
  Yes, you can export/import a model from an Oracle database to a different Oracle DB using the pl/sql API, documented in the doc PL/SQL Packages and Types.
  DBMS_DATA_MINING. EXPORT_MODEL
  DBMS_DATA_MINING. IMPORT_MODEL
  If you build a SVM model using the linear option, you can extract the coefficients in table form and import them into an Oracle database in some mid-layer service or not.
  Thank you, Mark

• question about 'PX SEND RANGE.

  When creating an index at the same time, a step in the plan is like 'PX SEND RANGE', my question is how oracle know how to divide the data in a different range to distribute the data to each slave? Suppose I have a column with asymmetric data, 90% of the data are of the order of 1,100, and the remaining 10% are of the order of 100.1, 000, 000. When to run 4 parallel, oracle will send the data of 1,250 slave 1 k and 250 k + 1... 500 k to slave 2 etc. ?
  
  I tried to trace it "set events 10391 alter trace name context of session forever, level 128';", but no information on how oracle divide the range of the data.
  
  test case to display the map
  drop table tt;
  create the table tt (a int);
  insertion in a select rownum of double connect by rownum < 1000000;
  commit;
  explain plan for create index tt_ix on tt (a) parallel 2;
  Select * from table (dbms_xplan.display);
  
  

  ------------------------------------------------------------------------------------------------------------------
  | Id  | Operation                | Name     | Rows  | Bytes | Cost (%CPU)| Time     |    TQ  |IN-OUT| PQ Distrib |
  ------------------------------------------------------------------------------------------------------------------
  |   0 | CREATE INDEX STATEMENT   |          |    82 |  1066 |     3   (0)| 00:00:01 |        |      |            |
  |   1 |  PX COORDINATOR          |          |       |       |            |          |        |      |            |
  |   2 |   PX SEND QC (ORDER)     | :TQ10001 |    82 |  1066 |            |          |  Q1,01 | P->S | QC (ORDER) |
  |   3 |    INDEX BUILD NON UNIQUE| TT_IX    |       |       |            |          |  Q1,01 | PCWP |            |
  |   4 |     SORT CREATE INDEX    |          |    82 |  1066 |            |          |  Q1,01 | PCWP |            |
  |   5 |      PX RECEIVE          |          |    82 |  1066 |     2   (0)| 00:00:01 |  Q1,01 | PCWP |            |
  |   6 |       PX SEND RANGE      | :TQ10000 |    82 |  1066 |     2   (0)| 00:00:01 |  Q1,00 | P->P | RANGE      |
  |   7 |        PX BLOCK ITERATOR |          |    82 |  1066 |     2   (0)| 00:00:01 |  Q1,00 | PCWC |            |
  |   8 |         TABLE ACCESS FULL| TT       |    82 |  1066 |     2   (0)| 00:00:01 |  Q1,00 | PCWP |            |
  ------------------------------------------------------------------------------------------------------------------

  user646745 wrote:
  When creating an index at the same time, a step in the plan is like 'PX SEND RANGE', my question is how oracle know how to divide the data in a different range to distribute the data to each slave? Suppose I have a column with asymmetric data, 90% of the data are of the order of 1,100, and the remaining 10% are of the order of 100.1, 000, 000. When to run 4 parallel, oracle will send the data of 1,250 slave 1 k and 250 k + 1... 500 k to slave 2 etc. ?

  Before tackling the parallel operation of the co-ordinator query probably executes a "store" where it samples a few blocks of data to see what it looks like and to pronounce on the beaches based on the sample.

  You can check if it happens by querying v$ pq_tqstat once the build is complete - there is an example of very old code on my website at http://www.jlcomp.demon.co.uk/pqcosts.html if you run the query, I think you'll find a line showing with server_type = "RANGER" and indications that he examined a small number of lines.

  (From sample can be very bad--especially if the data set is already sorted: I think that Christo Kutrovsky of Pythian may have written a note on the problem, and Oracle has addressed in part in newer versions)

  Concerning
  Jonathan Lewis

• ThinkStation P310 tour Universal Serial Bus Controller question

  I loaded Microsoft Windows 7 Professional 32 bit on a new ThinkStation P310. The 1 thing that I can't seem to load is the driver for it. Stand with a yellow exclamation point in Device Manager. This is one from scratch OS load using Windows 7 Professional 32 bit Microsoft Volume Licensing Center .iso. Looking at the properties is said the following:

  The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information.

  To find a driver for this device, click Update driver.

  I automatic search and there is no driver for the device. The hardware ID are:

  PCI\VEN_8086 & DEV_A12F & SUBSYS_30C017AA & REV_31
  PCI\VEN_8086 & DEV_A12F & SUBSYS_30C017AA
  PCI\VEN_8086 & DEV_A12F & CC_0C0330
  PCI\VEN_8086 & DEV_A12F & CC_0C03

  I loaded the driver alone that I can find on the Lenovo download site and it says it's 32 and 64 bit. I load and it loads ok however the USB controller still has an exclamation mark next to it. I'm going at the request of Renesas installs this driver and after it launches it tells me "not found USB 3.0 host controller '.

  Support has been NO help so far. I'm personally not conviced it is the correct driver for the USB controller.

  Any help would be appreciated

  Thank you!

  Dan

  I guess that you originally installed the following driver:

  https://download.Lenovo.com/ibmdl/pub/PC/pccbbs/thinkcentre_drivers/c1usb02us17.exe

  However, here's the right driver to install for the Intel integrated USB3.0 controller:

  https://download.Lenovo.com/pccbbs/thinkcentre_drivers/w2usb21us17.exe

• HP Pavilion x 360: Realtek PCie FE Family Controller question

  I have a laptop HP Pavilion x 360 and the Realtek PCie FE Family controller does not work. Its status says: cannot start (code 10). I tried to uninstall/insaling and it does not work and I tried the turn off/on it and which also failed. Don't know what to do. DC that I can't access the InternetVia ethernet and must rely on wireless. Help, please.

  If this happened just recently, try to do a system restore and choose a restore before the time of the ethernet adapter stop working.

  It would be the only other suggestion I can offer before you call HP technical support if your laptop is still under warranty.

• TI PCIxx12 Flashmedia controller driver source

  I have a laptop NW9440 that has a Texas Instruments PCIxx12 flash card (PCI\VEN_104C & DEV_803B & CC_0180) reader.

  The drivers for this card have been updated by HP or TI for Win XP 32 bit to support SDHC (SD cards, more than 4 GB) cards. Support for 64-bit operating systems has also been added at some stage, unfortunately, it seems that the support of the SDHC card is not in the 64-bit code, or if it did, the last level of pilot (SP43509) does not work on Windows 7 x 64.

  I opened a case for it, but HP refused to look at the problem saying:

  "There are no drivers Windows 7 tested or released for this device. HP recommends only Windows XP, VISTA and 2000 OS for this unit and all the drivers are available. »

  As HP seem to have lost all interest in support for it, please you will allow Texas Instruments to release the sources of the pilot for me so that I can fix myself.

  I don't want to be a party-pooper, but HP will not happen of its resources on a pilot for a machine of this time. Try this to extract the driver from Sony:

  http://win1337ist.WordPress.com/2012/08/08/how-to-extract-Sony-exe-drivers/