Convert a physical box 2003 Server vm and the VM is extremely slow. Trying to connect again...
Convert a physical box 2003 Server vm and the VM is extremely slow. Trying to connect again...
This is my first time converting a physical box to virtual. This is Server 2003. The conversion took place and I try to connect to the box now but it's so slow. Currently, he sat to apply personal settings for almost 10 minutes.
My boss has converted physical to virtual several times before and never said that he ran into something like this.
Am I missing something? Any suggestions?
I think that it is always looking for active directory. the newly P2V'ed will operate all IP settings. Therefore, you will need to wait until it has expired, and then enter the IP that is (ip, dns and etc.) above. the other way to speed things up would be to disconnect your network and the thing that your OS to expired immediately.
iDLE-jAM | SC 2, SC 3 & VCP 4
If you have found this device or any other answer useful please consider useful or correct buttons using attribute points
Tags: VMware
Similar Questions
-
What is no-WINS node? Does this mean he does not broadcast server service and the WINS service to resolve a name to intellectual property?
Hi Adam,.
essentially servers (nodes) Wins, run a program that turns the words we type in on Internet:
(ESPN.com) in the actual physical address of ESPN.com servers.
So no Wins use only the real 119.97.555.34 (not a real address) instead of ESPN.com words
B Eddie
-
Original title:
Virtualization server 2012
I got too many answers to this question. I need the correct answer before buying any CALs galore.
I would take my existing Server 2008 and upgrade to Server 2012 and the purchase of a virtual server in a data center. I have 25 computers that need to communicate with the server throughout the day, all the different machines. I want to know the best option without breaking the Bank. I permit the data center included in the package to my server.
Try asking in the Windows Server forum:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer -
Windows 2003 server question
Is possible to do a task under windows 2003 server depends on the performance of a separate task?
Why are you asking a question of Windows Server 2003 in a Windows XP forum?
Post in the Windows Server Forums:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/ -
type of identification for pop3 e-mail server? and the mail server (incoming) name outgoing id so please you were asked to provide the type of e-mail server and the name of the server to send the file by e-mail to windows. I use Windows live as my e-mail service
http://www.webdevelopersnotes.com/tips/windows_live_mail/windows_live_mail_setup.php
Contact your ISP (Internet Service Provider).
They offer your broad band/Dial-up connection.
Ask them to:
username
password for your service account to wide band/Dial-Up with themServer of incoming POP3 mail
outgoing mail SMTP serverThe above information is required to set up Windows Live Mail.
ISPS are usually happy to help you set up your email account.
See you soon.
Mick Murphy - Microsoft partner
-
I'm trying to convert a PDF to a word document and the system tells me that I must pay. The account must be active and does not require not renewal until mid-February of this year.
Hi louiset79309343,
Have you tried the https://cloud.acrobat.com/exportpdf online option?
I checked your account, you have an active subscription for the service to export it to Adobe PDF format.
Kind regards
Nicos -
Hello
Need help desperate please
Just purchased lightroom 6 boxed version, try installing and the display shows 'no internet connection' when in fact my connection is good
Hi TomasB,
Please reset the file browser & Internet hosts.
Reset Internet Browser refer: change or reset the settings of Internet Explorer - Windows help
- Close all windows of Internet Explorer that are currently open.
- Open the office and then tap or click the Internet Explorer icon on the taskbar. Change your settings will affect Internet Explorer and Internet Explorer for the office.
- Press or click the Tools button and then tap or click on Internet options.
- Press or click on the Advanced tab, and then tap or click Reset.
- In the reset Internet Explorer settings dialog, tap or click Reset.
- When Internet Explorer has finished the application default settings, press or click on close and then press or click OK. You will need to restart your PC for these changes to take effect.
Reset the hosts file
Reference: https://support.microsoft.com/en-us/kb/972034
Mac: How do I edit the file Hosts on Mac OS X - TekRevue
Let us know if it helps.
Kind regards
~ Mohit
-
Ideas: I'm trying to download the updates to my computer, but can't. I get the error code 646 and the download fails. I tried to download the update several times, but get the same answer. What is the problem?
- Pragrams you have problems with
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Hello
Try this 1st to see if it helps, and it should:
Description of the Patch registration cleanup tool
http://support.Microsoft.com/kb/976220/------------------------------------------------------
If necessary :
Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
or the update itself - double click a view more information (or click top then discovers on the right)Those who will take you to a page where you can download the update.
Or go here and the KBxxxxxx number to download it.
Download Center - mount the KBxxxxxx.
Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspxDownload - SAVE - go to where you put them - click on - RUN AS ADMIN
Then you can right click on the update in the updates Windows and HIDE.
If you get an error Installer install this version:
Windows install 4.5 Redistributable
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en----------------------------------------------------
Then run this:
How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821------------------------------------------------------------
Because these are all Office updates you might get more information if necessary in the Agency of those groups that
may have experienced the same problem.Office newsgroups
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspxMicrosoft.public.office.misc discussions
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us------------------------------------------------------------
If necessary you can incident free get reports however the above should take care of it for you.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
How to configure startup programs
Something seems to be continually downloading in the background, and the computer is so slow, it is booting?On Saturday, may 5, 2012 12:58:21 + 0000, joodZO wrote:
Something seems to be continually downloading in the background, and the computer is so slow, it is booting?
Since the very little information you provided, I do not know why
He runs slowly. But two points:1. first of all, note that you should be concerned all the programs
starts automatically, not only those who enter in the system tray.
Not all the programs auto-start manifesting by an icon in the
Status bar.On each program, you don't want to automatically start, check its
Options to see if he has the choice of not start (make sure you)
Indeed choose not to run, not just a "don't show icon.
Optional). Many can easily and better be arrested like that. If that is not
work, run MSCONFIG from the start. Run the line, and then click the Startup tab.
Uncheck the programs that you do not want to automatically start.However, if I were you, I wouldn't do it just for the application of
the minimum number of running programs. Despite what many people say
You should be concerned, not with the way that a lot of these programs
you run, but who. Some of them can degrade performance severely, but
others have no effect on performance.Don't stop all programs to run willy-nilly. What you need to do
is to determine what each program is, what its value is up to you which
the performance cost is its running all the time. You can try
Internet search and ask questions about the details here.Once you have this information, you can make a smart informed
decision on what you want to keep and what you want to get rid of.2. the computer running slowly is very often due to a malware
infection. What anti-virus and anti-spyware programs do you run?Ken Blake, Microsoft MVP
-
I have windows 8 and can had a 651 error trying to connect to my Internet verizon wireless. Any ideas on how to solve this problem?
This response may be a sound-end 2015 years.
But in the case where some people have this problem I had.
Correction on wireless W8.1 as follows,
Find/locate connection network in "charms."
Right click on Wi Fi - select DISABLE-wait a minute then
RT click on Wi - Fi to ACTIVATE.
Connect to your internet service provider when you see your SSID.
Also a note if your printer or the wireless on cpu receiver
Activate Bluetooth.
I hope this helps.
-
Virtualization of a physical Windows 2003 Server Standard live by Ethernet
I intend to virtualize a Windows Server 2003 server standard of Ethernet based field.
I am currently using the VMware Workstation 10.0.1 and I noticed/hear about the possibility of using "Virtualize a physical machine" to create a testmachine identical to one of my physical servers to clients.
The physical server is running on a network domain, and it is quite critical.
Can confirm them, it is possible to virtualize a Windows 2003 Server?
Is it not possible to virtualize the server for example, live by Ethernet, without disturbing it?
Best regards, Reynir
Your physical Windows Server 2003 machine is a domain controller or a member server standalone field?
If your server is not a domain controller, you can do a P2V from this machine without stops services, but there are always recommend stop all non Microsoft and no VMware services before starting the conversion, just to be course, there is any alteration of the data and other services like antivirus train killing the process of converter.
For P2V recommended, please visit: KB VMware: best practices for using and troubleshooting VMware Converter
And for the video tutorial of the P2V with VMware: VMware KB: convert a physical machine to the Fusion, Workstation or Player using stand-alone converter
-
Hello everyone I have an interesting question, I'm physical conversion to virtual pointing to the new virtual directly on the server esx conversion would set schedule for a day. But now, it's just stuck at 81% and not go further! I don't get any errors of ideas? questions are there a basis that I can look to see what is happening? Is there a way I can fix it without start over again. There are enough resources on the destination esx I had to change the hard drive space for destination and ram, but done nothing radical imprint more small which I think should do better.
It's an interesting case, you have here. I guess that conversion is complete, but somehow you do not see or a deadlock occurred.
Anyway you will probably be able to export logs to the customer. Go to the directory of newspapers to %ALLUSERSPROFILE%\Application Data\VMware\VMware vCenter Converter Standalone\logs (for WP/W3K) or vCenter Converter Standalone\logs %ALLUSERSPROFILE%\VMware\VMware (for Vista +) and find the log of the last worker (vmware-converter-worker - .log #). The status of the conversion is currently connected. Take a look, or that she has finished, is still running, is stuck.
If he has you can try restarting the client and/or server converter service. Do not stop the worker service unless you are sure that there is no conversion running!
HTH
Plamen
-
Hello
I have a Windows 2003 server and get error (Server 2003) 2019: the server was unable to allocate from the system non-paged pool because the pool was empty.
If anyone has encountered this error and has an instruction step by step to solve this problem please let me know.
appreciate the help!
Sincerely,
Riaz
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
If you give us a link to the new thread we can point to some resources it -
When I want to connect to another computer with win Server 2003 computer that I invited with a confirmation of the administrator. the name of the Server 2003 computer is ofoghserver. When I enter username: ofoghserver\administrator and password this occure failuer Login error: a network unkwon or user password... but I can connect to the server with remote desktop and I can connect to another computer with windows 7. all computers in this good work, but this computer can not enter windows server.
Did you create the corresponding user account and the password on the server? If this isn't the case, you should do this. MS - MVP - Elephant Boy computers - don't panic!
-
This happened not long ago and used a restore point from an earlier date that solved the problem. That did not work this time.
One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.
Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.
See:
Maybe you are looking for
-
I lost security issues
-
550-215na Pavilion: no sound from the rear audio input jack
Hello I recently bought a new PC and I immediately ran into an audio problem that I can't understand. I get no sound at all from the rear audio input jack. I'm getting sound before making, and the plug rear mic works. When I plug something into the r
-
I have an Iphone 6plus will not change the position landscape by turning the phone just like my old 5. This can be corrected.
-
I keep getting an icon indicating that the updates are ready to install, but every time I try to install an update always fails - microsoft SQL server 2005 express edition service pack 3 (KB955). Please explain why and tell me what I can do to instal