Convert W2K Server installs drivers on logon

Similar Questions

• Converter 4 Server W2k BSOD

  Am reposting this in a new thread per suggestion.

  Installed VMware Converter 4 on W2k Server all the patches applied. Server of solid rock that never BSOD'd since its installation.

  Two minutes of conversion the BSOD of machine.  There is a directory created to save point with a .vmx, hard and a folder with .lck.

  The vmdk file reaches 2 Megs.  It was a conversion of on-line server.  I was going to run VMware Standalone Client on the server itself and writes

  the image on a USB hard drive attached.  I ignored his request for the sysprep files, don't know if that makes a difference. I'm hesitant to try again.

  The windows, server logs don't seem to have anything useful regarding the BSOD.

  Could you please download a dump of memory the complete kernel for this crash? It would be useful to understand which driver caused the crash and why.

  First, you must enable full kernel memory image. Go to my computer, properties, advanced, startup and recovery.

  Then, you must rerun the P2V and obtain the dump file memory.

  BTW, if you already had a full kernel memory dumps enabled, you need not to revive anything. You can just get

  the dump of your Windows directory.

  The dump file is going to be a few hundred MB of size. You will not be able to post it here. Please use FTP

  to download on ftpsite.vmware.com using username/password as incoming/entrants and create your own directory.

• Cannot complete the installation of the agent vCenter Converter on server %. Error code 1 603

  I have attemptred to convert a Server Windows 2000 Server SP4 on a server of VMware ESXi 4.1.

  I started the process of a PC Windows XP running VMware converter-all-4.3.0 - 292238 and I got the error "could not complete the installation of the agent vCenter Converter on server %. Error 1 603 "code.

  Read in the forums, it seems that the correct version of VMware Converter Standalone is up to 4.1: is this correct?

  To solve the problem, I installed VMware converter standalone 3.x on Windows 2000 box, but I don't think it's the best choice.

  Can someone please help understandiong what is the proper way to convert a Windows 2000 Server?

  Concerning

  Marius

  Faced with the same problem.

  Solution: manually install the agent of vmware converter on the machine that you want to convert. Choose install Cusotm and only install the agent (client or server)

  See you soon

  Swap

• ESXi 4 Installable & drivers Server?

  Just unpacked my server and test ESXi 4 for the first time. With your traditional Server installation / OS, you can use the hardware vendor (in my case, Dell) CD/DVD to start the installation of the initial server to control the installation of the OS, so that all the drivers are installed according to the needs. Is it the same procedure for ESXi or I simply start directly at the exit of the installation CD and don't you worry about this?

  Thanks in advance.

  Just start the CD ESXi or plug the USB ESXi key and follow the instructions on the screen. Easy as that. No need to install any hardware not related software or drivers.

• CLI from VMware vCenter Converter vCenter Server 4.1

  CLI interface is supported for VMware vCenter Converter vCenter Server 4.1? (not independent).

  I see no mention to this topic in the Administration (vCenter Converter 4.2) Guide and VMware vCenter Converter Installation

  http://www.VMware.com/support/pubs/vcc_pubs.html

  Hello

  Converter 4.2 will not support CLI.

• Xcode Server installation failed (ssl configuration infrastructure)

  After the upgrade to Server 5.2 today, I am unable to start the service of Xcode as a result of a mistake.

  The first time, I tried to implement the service, after having chosen the Xcode application, I was asked to create a service user account Xcode. So, I followed the guests to create a Xcode Server user account.

  Then I saw a message that Xcode Helper should be allowed to make UI script, to which I agreed.

  Finally, a progress bar appears where, apparently, that was under the service of Xcode configuration.

  And then an error stating:

  Xcode Server installation failed (ssl configuration infrastructure)

  Try clicking on choose Xcode and selecting a new version of Xcode or upgrade to a newer version of the server.

  Given that I had just installed the latest version of Xcode previously, I advanced and checked that Xcode launches without problem, and no message appears.

  Then I went to System Preferences > Security & privacy > accessibility and verified that an entry is added for Xcode Helper, and I checked the box next to it to allow access.

  Also, I have advanced and connected to the server of Xcode user account and used the fast user switching option to return to my main account.

  Unfortunately, trying to start again service results in the same error. I even tried to start the service when you are logged on the server of Xcode user account. Whenever it has failed with the same message.

  Whenever I try to start the service, I see this (or very similar) message sequence struck the system log:

  20 September 15:50:36 servermgr_xcode Server [867]: getSetXcodePathProgressWithRequest: {}

  control = getSetXcodePathProgress;

  currentPercentageCompleteRangeMaximum = 10;

  currentPercentageCompleteRangeMinimum = 10;

  currentStep = 'Xcode stop server';

  percentComplete = 10;

  status = running;

  }

  20 September 15:50:37 Server servermgr_xcode [867]: task completed (State 0)

  20 September 15:50:37 Server servermgr_xcode [867]: stderr output for the job:

  (4 / 6) [START] stop nginx daemon

  (3 / 6) Server [START] stop API

  (1 / 6) [START] stop CouchDB

  (6 / 6) [START] stop builder

  (5 / 6) [START] daemon stop control

  (2 / 6) [START] stop repeat

  (5 / 6) [END - 0.05 S] Stop control daemon

  (1 / 6) [END - 0.05 S] Judgment of CouchDB

  (2 / 6) [END - 0.05 S] Stopping repeat

  (3 / 6) [END - 0.05 S] Stop server API

  (4 / 6) [END - 0.14 S] Stop the nginx daemon

  (6 / 6) [END - 0.16 S] Stop generator

  A successful!

  Total time: 0.32 seconds

  20 September 15:50:37 Server servermgr_xcode [867]: launch/usr/bin/xcrun xcscontrol - initialize - build-service-user xcodeserver

  20 September 15:50:37 Server servermgr_xcode [867]: wait for task to leave

  20 September 15:50:37 Server lsd [961]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

  20 September 15:50:37 Server servermgr_xcode [867]: xcscontrol reported progress: (1/29) checking that Xcode is accessible

  20 September 15:50:37 Server sudo [1422]: root: TTY = unknown; PWD =; USER = nobody; /Applications/XCode.app/Contents/developer = / usr/bin/file COMMAND

  20 September 15:50:37 Server servermgr_xcode [867]: xcscontrol reported progress: (1/29) checking that Xcode is accessible

  20 September 15:50:37 Server servermgr_xcode [867]: xcscontrol reported progress: running (4/29) xcode-selector - /Applications/Xcode.app

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: integration of control to prepare (9/29)

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: (11/29) setting up the config for Redis file

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: (12/29) setting up the config for CouchDB file

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: launchd jobs (13/29) system configuration

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: (14/29) creative group for users of service if required

  Note : There was a lot of posts like this that I missed:

  20 September 15:50:38 syslogd server [69]: notice of Configuration:

  ASL Module 'com.apple.AccountPolicyHelper' claims the selected messages.

  These messages may not appear in the standard system log files or in the database of the ASL.

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: configuration record (16/29)

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: users of creative services (17/29) if necessary

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: infrastructure configuration of SSL (18/29)

  20 September 15:50:39 Server servermgr_xcode [867]: getSetXcodePathProgressWithRequest: {}

  control = getSetXcodePathProgress;

  currentPercentageCompleteRangeMaximum = 75;

  currentPercentageCompleteRangeMinimum = 20;

  currentStep = "Configuring SSL infrastructure."

  percentComplete = 54;

  status = running;

  }

  20 September 15:50:41 com.apple.SecurityServer [114 Server]: displaying guest Keychain for Applications/Xcode.app/Contents/Developer/usr/bin/xcscontrol(1421)

  20 September 15:50:41 Server servermgr_xcode [867]: xcscontrol reported progress: FAILED (18/29): configuration of SSL infrastructure

  20 September 15:50:41 Server servermgr_xcode [867]: task completed (Status 5)

  20 September 15:50:41 Server servermgr_xcode [867]: stderr output for the job:

  (1/29) [START] make sure Xcode is accessible

  (1/29) [END - 0.20 S] Make sure Xcode is accessible

  Audit (2/29) [START] version of Xcode is supported

  (2/29) [END - 0.00 S] Check if the version of Xcode is supported

  Developer mode (5/29) [START] if necessary activation

  [START] Running (4/29) xcode-selector - /Applications/Xcode.app

  (29/3) [START] check if the server version is supported

  (3/29) [END - 0.02 S] Check if the server version is supported

  Data directories (6/29) [START] creation by default (if they are missing)

  (6/29) [END - 0.00 S] Creation of data directories by default (if they are missing)

  (7/29) [START] create a symbolic link to the current path of the Xcode application

  Access to the repository (8/29) [START] HTTP configuration

  Integration of control (9/29) [STARTED] preparation

  Access [START] SSH configuration repository (10/29)

  (8/29) [END - 0.12 S] Access to the HTTP repository configuration

  (7/29) [END - 0.12 S] Create a symbolic link to the current path of the Xcode application

  (10/29) [END - 0.12 S] The access to the repository SSH configuration

  (11/29) [START] establishing the file config for Redis

  (12/29) [START] set up the config for CouchDB file

  (13/29) [START] Setup launchd job system

  (5/29) [END - 0.16 S] Enabling developer mode if necessary

  (9/29) [END - 0.23 S] Preparation of control integrations

  (11/29) [END - 0.16 S] Setting up the config for Redis file

  (12/29) [END - 0.20 S] Setting up the config for CouchDB file

  (13/29) [END - 0.20 S] Launchd jobs system configuration

  Group creation [START] (14/29) for users of service if required

  Saving configuration [START] (16/29)

  (15/29) [START] configuration CouchDB to use all cores

  (14/29) [END - 0.02 S] Creation of service if required users group

  Users of creative services [START] (17/29) if necessary

  (4/29) [END - 0.41 S] Running xcode - select - switch for /Applications/Xcode.app

  (15/29) [END - 0.08] Configuration of CouchDB to use all cores

  (16/29) [END - 0.33 S] Configuration of the recording

  (17/29) [END - 0.52 S] Creation of users of the service if necessary

  Configuration of SSL infrastructure [START] (18/29)

  (18/29) [END - 3.03 S] FAILED: SSL infrastructure Configuration

  Failed: could not export the certificate of the server API: error Domain = =-25308 Security Code 'user intervention is not permitted.' UserInfo = {NSLocalizedDescription = User interaction is not allowed.}

  Total time: 4.13 seconds

  The service initialization error: could not export the certificate of the server API: error Domain = =-25308 Security Code 'user intervention is not permitted.' UserInfo = {NSLocalizedDescription = User interaction is not allowed.}

  20 September 15:50:41 Server servermgr_xcode [867]: response: {}

  error = "Xcode Server Configuration has failed (ssl configuration infrastructure)";

  errorCode = "-1";

  errorDomain = ServermgrXcodeErrorDomain;

  errorLocalizedDescription = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

  errorLocalizedFailureReason = "failed to install Service in step: Setup ssl infrastructure";

  errorLocalizedRecoverySuggestion = "try clicking on choose Xcode and selecting a new version of Xcode or upgrade to a newer version of the server.

  errorString = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

  status = 1;

  }

  20 September 15:50:41 com.apple.xpc.launchd [Server 1] (com.apple.dt.XCSDeviceService [1417]): Service not out 5 seconds after SIGTERM. Sending SIGKILL.

  20 September 15:50:42 Server servermgr_xcode [867]: getSetXcodePathProgressWithRequest: {}

  control = getSetXcodePathProgress;

  currentPercentageCompleteRangeMaximum = 75;

  currentPercentageCompleteRangeMinimum = 20;

  currentStep = "FAILED: SSL infrastructure configuration ';

  error = "Xcode Server Configuration has failed (ssl configuration infrastructure)";

  errorCode = "-1";

  errorDomain = ServermgrXcodeErrorDomain;

  errorLocalizedDescription = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

  errorLocalizedFailureReason = "failed to install Service in step: Setup ssl infrastructure";

  errorLocalizedRecoverySuggestion = "try clicking on choose Xcode and selecting a new version of Xcode or upgrade to a newer version of the server.

  errorString = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

  percentComplete = 54;

  status = FAILURE;

  }

  This article is interesting:

  20 September 15:50:41 com.apple.SecurityServer [114 Server]: displaying guest Keychain for Applications/Xcode.app/Contents/Developer/usr/bin/xcscontrol(1421)

  No prompt was displayed at this time. I had to see a real Keychain prompt? In any case, this article seems to be the cause of the problem:

  Failed: could not export the certificate of the server API: error Domain = =-25308 Security Code 'user intervention is not permitted.' UserInfo = {NSLocalizedDescription = User interaction is not allowed.}

  Help to get the Xcode service backup and race would be much appreciated!

  I had this same problem. I typed in the following in the terminal:

  sudo /applications/xcode-beta6.app/contents/developer/usr/bin/xcscontrol--reinitialiser

  After the reset, I tried to enable the server to Xcode from the macOS GUI server and it worked

• What is happening with the DNS requests that cannot not find a matched host (A) RR in the zone are sent to WINS servers, but there is no WINS server installation?

  What is happening with the DNS requests that cannot not find a matched host (A) RR in the zone are sent to WINS servers, but there is no WINS server installation?

  Hello

  Please repost these questions in the Technet Forums

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  See you soon.

• SQL server installation is either corrupt or has been tampered with. Please uninstall and run again together at the top.

  How can I fix this error? Thank you.
  SQL server installation is either corrupt or has been tampered with. Please uninstall and run again together at the top.

  Hi DMarie125,

  The question you have posted is better suited to the MSDN forums. You can ask your question in the help link.

  http://social.msdn.Microsoft.com/forums/en/category/SQLServer/

  Hope the helps of information.

• Server.error it locked out are currently no available connection server to process the logon request.

  Why am I not able to connect to my server (Windows Server 2008 R2 Standard)? My error is goes something like this... Currently, there are no available connection server to process the logon request.

  I'm sitting in front of the server and I can not connect to it...:)

  Thank you for visiting the Microsoft answers community.

  The question you have posted is related to Windows Server and would be better suited in the MS TechNet Windows Server Forum. Please visit this link to find a community that will provide the support you want.

• during startup, I get an error message. Your SQL server installation is either corrupt or has been tampered with (could not open SQLEVN70. RLL) how to solve this problem?

  during startup, I get an error message.  Your SQL server installation is either corrupt or has been tampered with (could not open SQLEVN70. RLL) how to solve this problem?

  Thank you for visiting the Microsoft answers community.

  The question you have posted is associated with MS SQL server and would be better suited to the Group Discussion TechNet Microsoft. Please visit this link to find a community that will provide the support you want.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "There is no connection available server to process your logon request.

  We just got a new laptop with Windows Vista, and we want to separate user accounts for the family. I had to download the software just to add another user, but whenever we try to log on to the other account, it said "there is currently no available connection server to process your logon request. Please, give me advice in normal English, as I am not a computer wiz. A list of specific instructions for this problem would be the best thing you could do!

  Why would you download software to create a new user account in the Vista operating system?
  It is already part of the Vista operating system to find out how.
  We do not know what you downloaded and installed on your laptop.

  http://www.vista4beginners.com/manage-user-accounts

  Read the part about creating user accounts in Vista.

  http://www.Vistax64.com/tutorials/93009-user-account-create.html

  And the link above.

  http://www.Microsoft.com/Windows/Windows-Vista/features/user-account-control.aspx

  See you soon. Mick Murphy - Microsoft partner

• Windows 7 - there are currently no available connection server to process the logon request

  Hello to all IT experts out there, good day.

  Our company currently a problem recently:
  Problem: Impossible to connect to the pc when outside his functions with Active Directory NT profile/account

  When: January 9, 2012 until today

  The frequency at which this happen: intermittently

  Description of the problem/error: there is currently no available connection server to process the logon request

  How many affected system: 4-5 machines with the same laptop model (HP 8540w)

  O.S Windows 7 64-bit Enterprise and Windows 7 64-bit Enterprise Edition with SP1
  Action taken:
  Area return, group update policy, re - create a profile NT, update BIOS, OS reformatting/reinstall.
  Current solution: connect using the profile/account local and use it at home, back in office, reconnect the LAN and able to connect using NT profile/account and retry again at home.
  More information: our company have model HP range and never receive such problem reported except this model. There are a lot of employees using this model too but yet get affected, now here's some machine assigned to the breast in the same Department, but we have identified if all 3rd party software installed which make changes of protocol network or element (no) and still we could not find any same software installed on these machines.
  What I'm looking for
  ?
  I need some experts advise to identify this regardless of whether a customer number or domain server problem, if the customer, what are the root cause and troubleshooting opportunities we should take
  If the server problem, I'll get assistance by opening a case to our server support team.
  Help, please. Thank you very much.
  One of the affected machine network news:
  C:\Windows\System32>ipconfig/all

  Windows IP configuration

  Name of the host...: XXXXXX

  Suffix main Dns...: XXXXXX.com

  Node... type: hybrid

  Active... IP routing: No.

  Active... proxy WINS: No.

  ... DNS suffix search list: XXXXXX.com

  XXXXXX.com

  Adapter Ethernet Local Area Connection * 17:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Juniper Network Connect virtual adapter

  Physical address.... : 00-FF-10-A0-65-0A

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. : XXXXX.com

  ... Description: Intel Centrino Ultimate-N 6300 AGN

  Physical address.... : 00-24-D7-BD-5B-E0

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: fe80::79c9:372 has: 7a7c:e4dc % 15 (Preferred)

  IPv4 address...: 130.30.87.80 (Preferred)

  ... Subnet mask: 255.255.248.0.

  Lease obtained...: Thursday, February 2, 2012 07:17:24

  End of the lease...: Friday, February 3, 2012 07:17:23

  ... Default gateway. : 130.30.80.1.

  DHCP server...: 130.27.32.128

  DHCPv6 IOOKING...: 452994263

  DHCPv6 DUID customer...: 00-01-00-01-15-78-C2-8C-B4-99-BA-E9-86-5E

  DNS servers...: 130.27.32.128

  130.27.48.128

  Primary WINS server...: 130.27.152.52

  Secondary WINS server...: 130.29.152.153

  NetBIOS over TCP/IP...: enabled

  Bluetooth network connection Ethernet card:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Device Bluetooth (personal area network)

  Physical address.... : CC-52-AF-88-D9-31

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. : XXXXX.com

  ... Description: Intel 82577LM Gigabit network connectivity

  on

  Physical address.... : B4-99-BA-E9-86-5E

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: fe80::e8d1:38 ca: e868:9770% 12 (Preferred)

  IPv4 address...: 130.27.38.17 (Preferred)

  Subnet mask...
  . : 255.255.252.0.
  Lease obtained...: Thursday, February 2, 2012 07:17:08
  End of the lease...: Thursday, February 9, 2012 07:17:10
  ... Default gateway. : 130.27.36.1.
  DHCP server...: 130.27.32.128
  DHCPv6 IOOKING...: 330602938
  DHCPv6 DUID customer...: 00-01-00-01-15-78-C2-8C-B4-99-BA-E9-86-5E
  DNS servers...: 130.27.32.128
  130.27.48.128
  Primary WINS server...: 130.27.152.52
  Secondary WINS server...: 130.29.152.153
  NetBIOS over TCP/IP...: enabled
  Card tunnel Local Area Connection * 20:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: #5 Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Card adapt 6TO4 tunnel:
  State of the media...
  . : Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Card tunnel Local Area Connection * 12:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Teredo Tunneling adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Card tunnel Local Area Connection * 17:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 adapt #3
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Card tunnel Local Area Connection * 19:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: #4 Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Card tunnel Local Area Connection * 22:
  The connection-specific DNS suffix. : XXXXX.com
  ... Description: #7 Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2002:821 b: 2611:821 b: 2611 (Preferred)
  IPv6 address: 2002:821e:5750:821e:5750 (Preferred)
  ... Default gateway. : 2002:c058:6301:c058:6301
  DNS servers...
  . : 130.27.32.128
  130.27.48.128
  NetBIOS over TCP/IP...: disabled
  Card tunnel Local Area Connection * 21:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: #6 Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Reusable Microsoft 6To4 tunnel map:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 adapt #2
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Tunnel adapter isatap. {251B844B-9080-4D91-A33C-D644B29D87A5}:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Adapter Microsoft ISATAP #2
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Tunnel adapter isatap. {E7AF5244-8866-4417-BCD4-8A7E8CCBF18F}:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Tunnel adapter ISATAP.SCS.Agilent.com:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. : XXXXX.com
  ... Description: Adapter Microsoft ISATAP #3
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Mirage Server installation fails: the server failed to register

  Quick history: the single server installation (Server 2012 R2 w / SQL Express 2012) using the version 5.5.05294 for all components. I have a dedicated domain service account and management group that has local administrator rights and I am connected using this account. I have disabled UAC completely. I've successfully installed the Mirage Management Server and the SQL database looks good. I installed the Console of Mirage as well and can connect to the server and load the license key.

  Here is the error I get when you install the Mirage server:

  

  It does not right 'Record VMWare Mirage to the Cluster of servers', which is located just past the step where it checks the version compatibility. If I go back to the Console, I've seen the Mirage Server installed, but gives the status of "Version mismatch". I am 100% certain that the version is the same (5.5.0.5294) and even when so far to control binary files and the SQL database to ensure that all list 05294 version:

  

  As you can see, the version is the same and I have already installed the management server:

  

  You look at the log of the server installation.

  Install using:

  msiexec /i INSTALLATION_PATH/l * v LOG_FILE

  Open the log file and look for errors after the message, it could lead you in the right direction (post the log of the excerpts here)

  Make sure that your Mirage account has the correct permissions in AD (KB 2105800 details most of them).

  Also, make sure that the user has read permissions to users and computers basic UO in AD.

• Export error records 'diagnosis package cannot be recovered from VMware vCenter Converter Standalone. "Error: could not generate file diagnosis of VMware vCenter Converter Standalone server.

  Hey, gentlemen!

  Trying to export logs from VMware vCenter Converter Standalone v 5.5.2 and this error occurs.

  "The package of diagnosis cannot be recovered from VMware vCenter Converter Standalone. "Error: could not generate file diagnosis of VMware vCenter Converter Standalone server.

  Can he save data to the file journal, but only coverter_gui newspapers, nothing else.

  Google search returns no results at all.

  What could be?

  OK, it is resolved after you restart the converter Services.

• In the face of the question then Server installation SOA to put up BPM11g working environment

  Hi all

  I was able to install the Weblogic Server and database, but I am facing problem in SOA server installation.

  I try to install it to run application 11g BPM.

  I saw the same problem has already been answered, but available solutions are not solve my problem.

  Error message: Specify the location of the JDK/JRE when you launch the installer. Invoking the setup.exe with - jreLoc < JDK/JRE location absolute path > settings.

  I tried both way to initialize the installation. IE directly through setup.exe and command line, but in both cases I get the same error.

  He don't ask for path to Java command-line also.

  (a) in my java 7 system is installed.

  (b) I used Oracle Database 11 g instead of XE

  This could be the reason?

  I checked the program files:

  jre7 and jdk1.7.0_45 are here.

  I also set JAVA_HOME in the C:\Program Files\java\jre7 environment variable

  path: C:\Program Files\java\jdk1.7.0_45\bin

  Please help me to solve this because I'm stuck in this facility in recent days.

  Thank you!

  Try running the setup in the disk1/install/win(32/64) folder and then provide the path to the jdk "C:\Program Files\java\jdk1.7.0_45"

  Kind regards

  Anshul