COPY - FAX - SCAN flashing lights

Similar Questions

• HP Ps 309 a ADF (automatic document feeder) is good until the last page (copy, fax, scan) food

  ADF (automatic document feeder) is good until the last page (copy, fax, scan) food.

  The last page will scan, copy or fax.  But the charger will not expel the last page completely out of the feeder.  The last page will be halfway on the bottom of the feeder.  I searched this site and a few others and can't locate an answer.  I have seen the centre solution and also files with no joy help...  Help please.

  Try the reset in 'step 4' of this document:

  Reset

• Error message: "cannot find the wireless device" and not scan using 3 in 1 copy fax print HP 4500.

  Original title: Carpenter

  I can print but can't scan. Tried to uninstall then install the 3 in 1 copy fax printing hp 4500 but says cannot find the wireless device.

  Hi Ryan,

  You can check the link to HP support to run the HP Diagnostic Utility to check the issue of scanning:

  Find and fix common problems using tools of diagnosis HP printer=

  You can also check out the link to HP support and try to update the latest drivers/software for your printer:

  HP support

  You can also read the articles and check if it helps:

  Add or remove a scanner

  Scanning: Frequently asked questions

  The problems of scanning

• Premium Fax e-All-In-One c410: Premium Fax e-All-In-One c410 printing, copying and scanning problems

  My c410 HP Premium Fax e-all-in-one won't copy (white spell page), only prints in faded gray even when the quality is set to 'best', will only print up and part side of page - excludes the middle of the page and analyze only a portion of the document.  A new black ink cartridge has been installed in a couple of weeks.  Supply levels say the black is full, all the color is 3/4 full and the photo ink is full.  The printer has been idle for a few weeks - I had to restart it returning to work, because he wouldn't (and is often not) respond to print requests.

  Hi @14141,

  I see by your post that the copies are to come in white and black is printing in grayscale. I will definitely do my best to help you.

  Please, try the steps outlined in these documents to see if she will help solve this problem. Do not take into account securities.

  Problems print quality setting for the HP Photosmart Premium Fax all-in-One Printer Series (C410a C410b, C410c, C410d, C410e).

  An "Incompatible cartridge ' or 'Ink cartridge problem' message for HP Photosmart Premium Fax e-All-in-One Printer Series (C410)."

  Inkjet printers from HP - "Ox."... «or «C2...» "Error code appears.

  I have also provided a few steps to troubleshoot issues when you try to print from the Mac.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +.

  Then click the Add button.

  You use genuine HP cartridges?
  What are the ink levels?

  Let me know the results of the Diagnostic print quality report?

  If you appreciate my efforts, please click on the "Thumbs up" button below.

  If there is anything else I can help you, let me know. Thank you.

• Impossible to copy and scan on all-in-one printer, HP Deskjet F4180.

  I can't make a copy and scan on the surface of the glass of my printer HP deskjet F4180 all-in-one. The printer says: error in the copy menu and seeing red flashes on color and black. However, I am able to print from my laptop and a pop-up message would be in my laptop showing the ink cartridges (black and color) are placed incorrectly. Check the ink cartridges, both are in their right place and broken up. Need help... Please.

  I found this document which decodes what mean flashing lights.  There are a lot of different codes described, but I found a heading "question: one or two of the lights blink check print cartridge" which seems to be what's going on your printer.  Basically it's saying that the cartridges are out of alignment or defective.  If the document is not help clarify, let me know and I'll see what I can find.

• HP Officejet Pro 8600 more black vertical line when copy or scan

  HP Officejet Pro 8600 more black vertical line when copy or scan everything in the middle of the page

  Hi Clementstl,

  I understand that you have a 8600 Pro Officejet which puts a black vertical line in the center of your copies/scans. I'm sorry to hear you had to deal with this, but I will certainly do my best to help you solve this problem.

  I recommend the rest of this document of vertical stripes, lines or streaks in the Copies, faxes or Scans as it should be in a position to help to cross that line. The most common cause is a small spot of something on the glass of the scanner, so just make sure that when you're cleaning use you as much elbow grease you can collect

  Just to clarify a little further, if the problem only seems to occur when you use the automatic document feeder, you'll want to focus your attention on the small strip of glass that he uses on the left side. If it only occurs when you use the flat glass, you want to concentrate on the large piece of glass he uses.

  Hope this helps, have a nice day!

• Text messaging alerts? As the screen coming or flashing light?

  I'm legally deaf and can't hear the phones, I use these phones PDA, SMS and e-mail.
  When I had my Blackberry and iPhone, Black-Jack, there aps or programs that you could buy that would turn the display when you receive a text email. There is a flashing light or the screen will light up and stay lit for a certain period of time.

  They have something like that for this phone? Or is their a hack that can be done to it?

  I use the vibration when it is in my pocket, but I need something for when he throws on the desktop.

  Here are a few links on the Android 2.1 update:

  • Release notes for Motorola (PDF file)
  • User manual (PDF file)
  • Motorola Page basics
  • Announces at & T
  • Download/installation of upgrade page - I recommend the method "preferred." It is to download the upgrade file and copy to sd card from your phone.
  • Motorola Backflip with Android 2.1 Troubleshooting page

  Once you get installed 2.1 setting the led is:

  Menu-> settings-> sound & display settings

  Check the notification LED.

  Lack of recall and an easy reminder that both should run on the Backflip.

  I did not use Handcent for some time, but I think it can be set to repeat reminders.

  ----
  I'm a volunteer. The MotoXprt tag means that I spend too much time here. The views expressed in my posts are mine. I am owner of a Backflip and a setback. If my opinion doesn't have any sense - ignore it!

• Copy and scan the streaks

  OfficeJet Pro 8600 - I was told that to solve the problem of the sequence to the toggle. That I discovered on my own that this resets / solves the problem. Can someone tell me why the printer can not be left on at all times? HP chat person said this has to do with static electricity... BS sounds to me. Never had this problem with my old 8500. PC on the network is disabled during the night, back in the morning.

  Tinpenny,

  Yes, as soon as you see the options of façade fax, scan and copy the printer is completely initialized.

• HP deskjet 2544: HP deskjet 2544 incompatible ink/flashing lights ink intermittently

  Despite the change of new cartridges, through aid and all operations includes the cleaning heads, cartridges with distilled water, coffee filters, the printer is still incompatible Advisor ink and the ink is not save.  I used the scan doctor and the State of the device is the only thing that does not pass.  I have flashing lights of ink intermittently and it still does not print.

  Your and the HP solutions did not work. Here's what I did: I have one installed my printer.  Return of the ink cartridges and received replacement cartridges.  Cartridges of entry.  align etc... Reinstalled my printer.  Everything works now.  My belief is that the cartridges were defective.

• HP officejet j6480-do not copy or scan.

  The Officejet prints well, but will not copy or scan anything on the glass - what is proper. The whole page comes out black and striped - cannot do printing, only a pale reflection of the form of the paper I copy, i.e. a receipt.   I do not see the light 'bar' pass back and forth. Suggestions?

  Hi, Sandy,

  Please, repeat no messages on the same topic.  It is a violation of the COC.  You will find under "Please Don ' t ':

  Post questions that are identical or similar to the questions you have already posted. When someone has an answer to your question, that person will respond.

  Pull the power cord to the back of the unit (with it's ON!)

  Keep #6 on the front of the unit.

  While now the buttons to the bottom of the plug again.

  Continue to hold the buttons for at least 15 seconds.

  May need to try this twice before scans are clean if the unit is ok.  Otherwise, you may need to replace the unit.

  You can also try the steps listed in document scanner failure

• HP officejet 4630: copy and scanning does not

  Since the upgrade to Windows 10 HP 4630 Oficejet stopped working for copying and scanning options.  Print and fax options are OK.  Have updated to the latest version of the software (many times) without success.   Also checked the scan of the computer is turned on.  When you use HP Print and Scan verification pilot doctor fails (unable to communicate with the product). Follow the suggestion without any positive result.

  Have tried everything that I could find on the internet to solve the problem without success.  Any ideas what else can be done or

  the driver for scanning and copying does not work with Windows 10 in all?

  Even if I try to use the only printer with Dell computer off, still can not copy or scan a document.

  Hello! Welcome to the HP community @Stewball1313,

  I read your post about how you are unable to make copies or your Officejet 4630 analyses, and I wanted to respond with my own suggestions. As you can not copy, it is a sign of a hardware problem as copies do not involve the computer somehow. I think the question can be a failure of scan of your description, as for you to open the link I posted below and try a reset and checking the connection of power supply and then try to make a copy again. If copies are still not, I would then contact HP directly to see about a printer replacement or trade for a new unit. If you encounter other problems, let me know and I'll do my best to help you!

  (Note: the Officejet 4630 is compatible with Windows 10 and it has full functionality of drivers available for the operating system.) However, if the problem is a hardware failure, a driver will fix a hardware problem).

  All products - in - One HP - a 'Failure of the Scanner' Message displays on the all-in-one control panel and you cannot scan, copy or Fax

  Click on the thumb to below testify my help!
  Click on the "accept as Solution" if I'm you guide to a solution!

• PSC 1210 all-in-one: hp psc 1210 order copy but scan and print

  Until recently the copied PSC 1210, scanned and printed.  It copies is no longer in black & white, or rather when I press the copy button, the scanning starts and the printer prints a blank page.  Without moving anything, I can scan the document (Windows Fax and Scan) and print it using the same PSC 1210 and it prints perfectly.  A color copy prints a few characters in blue/green.  No recent change in hardware or software (other than the Microsoft updates).

  Hi @will-not-copy,.

  Maybe the problem is related to the ink, especially the black ink. If I understand your description that you can scan and print again, but you are unable to copy. Copying and scanning use the same hardware components so ideally if we work so should the other. Copy and print using the same ink system so if you can print, you should be able to copy; However, the impression of the computer may produce a composite black, which means that the colors combine to make black, when copying the printer can pull out the black cartridge to produce black. That's what I mean when I say that the problem might have something to do with the he black cartridge.

  I would like to print a self-test report to see if the printer hardware can produce black ink in stand-alone mode. To print a report, use the following steps:

  1. Load the plain, white paper into the paper tray.

• hp6700 not copy or scan

  HP6700 used to print, copy and scan.  Now it only prints.  I run Win7 64 bit OS.  Printer using a wireless connection.

  I've uninstalled and reinstalled the drivers, update the firmware and run HP Print and Scan doctor.  Still no luck.  Doctor scan gives message "scanning driver is unable to communicate with the product."  I disconnect and reconnect the printer, rebooting, no luck.

  When I launch analysis console printer, I get the message on computer, "communication scanner cannot be established.  I tried to scan as a PDF and JPG... same result.  I tried to scan to USB... endless loop.

  When I try to copy from the console, I don't receive any message.  Justs printer is located in the loop displaying "copy preparation.

  WIA is started.  RPC is started.  Hardware detection kernel is started.  I ran the update... everything is up-to-date.

  I tried scanning with firewall and McAfee firewall disabled... same result.

  I'm out of ideas.

  I assume by 'printer console' you mean that the control panel with the LCD screen on the printer? If the copy fails, it would mean that the problem is at the printer, has nothing to do with the computer, or the network or usb, because in a copy job, none of that is involved. The common element in the scanning and copying is the scanner, check so first to scan, when you start copying or scanning, see the lights come on and moving through the glass? If this isn't the case, the scanner is dead or a cable may be loose.

• C6280 All in with Mac OS x can not copy or scan

  I can't copy or scan. on my 6280 C all in one.  I use Mac OS x 10.7. It worked, but now all I get is a sheet with all the gray-black ink which resembles what happens if you leave the cover upward. This seems printed on or in the preview copy and scan on the copying and scanning previews - scans show a test of color along the edge.  I can print from my computer.

  I tried most of these steps.  Because it would not copy or scan it look like lamp or sensor was out. So I got a new all-in-one HP at Costco.  To still get advice ho to replace light would cost $25 at HP as it was not under warranty, as well as any necessary parts.  New one is $99.

  Thank you very much! PROBLEM SOLVED.  It's really cool to have this forum available! BRAVO!

• Windows Fax & scan using Outlook 2007 does not display do not all contacts

  This can be a matter of Office 2007. I use Windows Fax Scan & and Outlook 2007. I can't choose a recipient in Outlook 2007 Contacts correctly use in Windows Fax & Scan. When I click the To: button in Windows Fax & Scan I have only three columns displayed. Name, full name, and e-mail address.  If the recipient does not have an e-mail address, his name does not appear. Who am I put in wrong place? I don't see an option in Windows Fax & Scan. What is an Outlook setting? Any help would be appreciated.

  From: Hal Hostetler

  This is probably due to sync Palm/BB and/or the / import export, email addresses don't always 'solve' prevents them underscores when used in address lists.  One thing to note for the future is to NEVER use Outlook. PST, import and export functions, they are broken and have been, they lose data and the. PST Import feature usually corrupts the Outlook profile in use at the time.  Instead, just make a copy of the current value, by default. PST file when Outlook is closed, take this copy to your new computer, place it in a folder where it will NOT overwrite any existing... PST files, make sure it is not set to read only (which will happen if you use a CD for transfer, then open of in Outlook using ' file |) Open | Outlook data file. " Do drag what you should leave the default copy on your new machine, or set as the default value and continue to use it.

  About 900 contacts, see if this clever utility can help with that:

  http://www.Chapura.com/downloads_utilities.php

  E-mail address utility

  Another response of the community of Windows Vista discussion groups