«Copy in...» "and the Destination tab, what's the difference?

Similar Questions

• Unable to install Windows Vista, the system freezes at copying files and the extension of the files

  Original title: Setup error

  So I installed window vista Ultimate edition on my Mac, like two windows. I backed up all of my hard drives. so when I started to install everything went well until when it came in part from extension of files and copy files to the * something *. After like 20 minutes I had this error saying could not complete the installation because of corrupted files or something and then he is out. I tried homebasic, home premium etc. but I received an error even for each other. I went to the dealer where I bought the cd, returned and got another but still have the same thing

  Hello

  ·        What are your system specs?

  ·        How you try to install windows vista on the system? After the start of the desktop?

  ·        What is the exact error message that you experience when the system hangs during the installation?

  I suggest you to disconnect all external devices that are connected to the system such as (printers, scanners, etc.) and see if the problem is resolved.

  This occurs mainly, if the system (hardware or software) is not compatible with the operating system that you are trying to install on the system. I suggest you to format the partition in which you try to install Windows Vista, and then check if you are able to install the operating system or not.

  Installation and reinstallingWindows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista

  I suggest you to check the below link.

  http://social.technet.Microsoft.com/forums/en-CA/itprovistadeployment/thread/6cb6510d-3e4f-4611-ba73-7e68fc4aa0a6

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Size of the placed Image and the difference in quality

  Hello world

  I'm under Indesign Adobe cs6 Version 8.01

  I have a document which is 2048px x 1536px (for iPad resolution Retina display).

  I reszied all my images to about 1140px x 760px at 300PPI

  When I place images in Indesign it resizes the image to 180px x 272px

  The number of effective pixels and actual pixels are 300 PPI resolution that I've resized the in photoshop under the links section

  The quality of the preview is set high quality

  In the File Handling preferences preserve Image Dimensions when the restoration of the links are on

  I tried to save the image in Jpeg, Tiff and PNG formats to solve the problem

  I set my default object style Frame Gun on site and be sure to adjust automatically is checked and the editing of content is set to None.

  What can be done to rememdy this problem?

  I want just the images that I've resized in Photoshop CS6 to be placed in the exact dimensions that I've resized to do the set up files simple and easy.

  If you can please help with this problem as soon as possible I would be very happy.

  Thank you very much

  Save images to 72 dpi (without resampling), or their scale in ID.

• free vSphere Datastore space and the differences in size of VMDK

  I am listing and sizes VM reports and the amount of space they take on their related data storage. I used PowerCLI to capture this information and have issued the following command to retrieve the data store size and free space: Get-data store. Returns a name, quality and free space. Then, I want to see the size of the VMDK on these data stores using the: Get-Datastore. Get - VM | Get-hard drive. This returns the size VMDK in KB and after you convert in the UK, I sum up the totals and calculate space to subtract from the total size of the data warehouses. I have a lag in information in free space. For example:

  Name FreeSpaceMB CapacityMB

  vSphere 1 63634 511744 storage

  vSphere 2 60576 511744 storage

  The data that I get of you add up all the VMDK located on these two stores of data then subtracting total capacity does not equal free space above. I did this on our entire VM infrastructure and continue to run on this issue. The VMDK must reside somewhere, so why they bring two different digits? Is there a any correlation between the VMDK size and free space? Often my data are disabled by nearly a terabyte.

  In this case less than 50 GB, remember to file vswp, etc.

  But sometimes report is simply wrong in vSphere Client, you can get accurate information in the service console.

  ---

  MCSA, MCTS Hyper-V, VCP 3/4, VMware vExpert

  http://blog.vadmin.ru

• Unlike COUNTY and the difference in data between 2 sets of data

  Hey guys,.
  I have a question here, probably, it revolves around the UNION, INSERSECT and LESS and maybe something else I'm missing.
  
  I'm two sets of questions, and I have 2 paintings.
  

  select count(student_id) from adhoc_student_table1;
  select count(student_id) from adhoc_student_table2;
  
  select student_id from adhoc_student_table1 order by student_id;
  select student_id from adhoc_student_table2 order by student_id;

  These tables contain data and have been sorted by student_id. I want to find the difference in NUMBER between the first set of SELECT and I want to find a difference in the student ID in the second set to SELECT.
  
  Any ideas? As always, any help is appreciated!

  Hello

  These tables do contain data and have been sorted by student_id. I want to find the difference in COUNT between the first set of SELECT and I want to find a difference in Student IDs in the second set of SELECT.
  

  Hope this helps

  select (select count(student_id) from adhoc_student_table1) -
     (select count(student_id) from adhoc_student_table2) from dual
  
  ---If you want the difference in first table not available in second table.
  
  select student_id from adhoc_student_table1 order by student_id
  minus
  select student_id from adhoc_student_table2 order by student_id
  
  -- or you wanted the difference from both table.
  with tab1 as
  (
     select student_id from
        adhoc_student_table1
  )
  tab2 as
  (
      select student_id from
  adhoc_student_table2
  )
  select * from (select student_id from tab1
                       union select student_id from tab2)
  minus
  select * from (select student_id from tab1
                      intersect select student_id from tab2)
  )
  

  If you could post the input samples and expected, maybe you can get a more valuable solution.

  Concerning
  Anurag Tibrewal.

• BlackBerry Smartphones what the purpose and the difference between Blackberry devices and software updates to the Blackberry Manager?

  I got my new Blackberry Curve 8330 3 weeks red and I installed the BB Desktop Manager that comes with the CD called Blackberry user tools.   Now when I click on "updates" on the lower part of the Desktop Manager, a popup window with all sorts of information that I don't know where to go first.  My version of the op is a 4.3.0 xxx what is desktop software for? Is this software integrated with the Desktop Manager, or is it a separate thing?

  Hope to hear from you beautiful peeople soon to explain this for me!

  Not necessarily. I'm a tech person, so I'd rather have the latest greatest version of ang of the software I use. So if you are happy with 4.3 and it is not crashing or causing errors so feel free to continue using it.

  You can always try 4.7 and if you don't like it uninstall and reinstall 4.3

• Type of failover and the difference

  Hello

  I would like to know what are the different type of failover in PIX 515E with 6,3 OS.

  I want all the details of it.

  I am aware of LAN-based failover and failover with cable to failover.

  Why the failover cable is use and it is important.

  can any 1 give me details.

  Kind regards

  Riahi

  Hello

  hope this link helps.

  http://Cisco.com/en/us/products/sw/secursw/ps2120/products_configuration_guide_chapter09186a008017278a.html

  regds

• Time of the value of a prepared statement and the differences in execution plan

  Hi guys... I have a doubt here that I was not able to specify the search on the internet.
  
  Is on prepared statements...
  
  When I do: con.prepareStatement (query);
  
  then the query is compiled and an execution plan is for this query on the database, I know. But what happens when I do con.close. Is the accessible yet statement caching other executions? to make this example:
  
  Suppose we are joining 20 tables and we have about 10 parameters for this query

  public ArrayList getData(String id1, String id2, String id 10) {       ArrayList response=new ArrayList();       Connection con=manager.getConnection();       String query="select name, phone, debtvalue, currency, etc from table1, table2, table3, table4, table20 where                           table1.id=table2.t1id and table2.id=table3.id and table2.fid=? and table1.fid=? and etc etc";//a big query       PreparedStatement pst=con.prepareStatement("select");       pst.setString (1, id1);       pst.setString (2, id2);       pst.setString (3, id3);       .       .       pst.setString (10, id10);       ResultSet rs=pst.executeQuery();       while (rs.next()) {               //do whatever and build the response ArrayList       }       rs.close();       pst.close();       return response; }

  Will be the compilation of the prepared statement and this execution plan is available for every performance of the getData method. Or a new plan of compilation and execution is calculated whenever I execute the method? Assuming that the running query takes a long time to maturity it its complexity and runs about 100 times a day in a production environment. It is advisable to use the prepared statement?
  
  Is the precompiled stuff avaible if I use a "" "NEW" "" said PreparedStatement with the same query?
  
  Thank you very much in advance for your answers...
  
  Published by: user4789473 on 25-mar-2013 17:14

  If you lose / close the statement prepared, Yes, you lose the ID. If you prepare again the same
  SQL, the DBMS must analyze the SQL code again, if to see if there is a query plan
  still/already existing for the DBMS session. According to the DBMS, it may or may not
  find/have/use plan, he created for the previous statement.

• Pixels and the differences in size of document in Illustrator than Photoshop

  Why the pixels of a project in illustrator is different from that of the same proportion of pixel of a project in Photoshop?  Example: A project can in Illustrator can be a work plan of 950px X 950px in 12 inch and Photoshop, this same pixel ratio will be 4 3/4 in.

  The sovereigns in Illustrator are always with a fixed rate of 1 inch = 72 pixels (72 dpi), you can check this by right-clicking the rule and selecting inches or pixels and you will see that 950 px 13.9 inches and 12 inches will not be as you said.

  The ratio of the rulers in Photoshop depends on the resolution of the ppi of the image defined by the user in the Image Size dialog box. If choose Image > Image size and select a resolution of 72 pixels/inch (ppi) will correspond to the ratio of the rulers in Photoshop Illustrator. If you set it to something else, that they will not, in your case with an image with dimensions of 4.75 inches in Photoshop, the resolution will be 200 dpi in order to contain 950 pixels per side.

  When you save an image from Photoshop, which contains metadata, it contains information about the size of the document in inches and pixels. Illustrator will place these images with the size of inches not the pixels in the areas shown on the leaders of the Illustrator, internally, but the image will contain all the pixels, as indicated next to the IPP in the control under the main menu bar when the image is selected. These internal (real) image pixels will be used when printing, and when you zoom in on the screen to display the image. Also if you are copying from Photoshop and paste into Illustrator, he also will stick with the size of the po and not pixels (at least this is how it works with CS5 on Windows)

  If the placed image is without metadata Illustrator will always place it assuming that 72 px = 1 inch (72 dpi). You can check if in Photoshop to save an image using save for Web and devices and choose None for the metadata.

• Performance of Windows 7 and the differences of 32 and 64-bit...

  Here you can see the performance from one version to the other differences in the assessment of the experience with Windows 7 at his little two versions 32 and 64 ultimate.

  http://1.BP.blogspot.com/_vQInzvdaQQ8/Ssp4QUm7ylI/AAAAAAAABcE/aV82zFxifh8/S1600-h/Sistema64Bits.PNG

  http://1.BP.blogspot.com/_vQInzvdaQQ8/Ssp4MsJ27PI/AAAAAAAABb8/XSmlARqrcEQ/S1600-h/32bitsimage.jpg

  Post edited by: merlinpat

  32-bit operating systems are limited to 3 GB, but the performance is similar in Internet/desktop applications every day.

  If you do a lot of creating media (e.g. video coding high definition or music production), 64-bit would be a better option.

• What is the difference between a triangle wave, waveform of the triangle and the triangle pattern

  To generate a waveform of triangle, I have 3 vi I could use. Signal Processing-> generation of signals-> Triangle wave.vi, Signal-> signal generation processing-> Triangle Pattern.vi, programming-> wave->-> generation of waveform analog waveform-> Triangle waveform.vi.

  What is the fundamental difference between these 3. I understand that all 3 have a different set of entry and I can use them according to what combination of input data that I have. Are there any special cases for which each is used?

  You should get really understand DAQ and the difference between the data types. When you create a waveform data type, the data type includes timing information. For the acquisition of data the most important is the dt or the time between samples. You have configured the DAQ Assistant to use this information to generate the waveform. When you create the table 1 d, obviously it cannot contain information of timing and when you convert dynamic data, all you will get is a default dt 1.

  As indicated, you can use either feature, if you create the table 1 d, you will need to change the data to add to the dt you want.

  Look inside the basic function generator. It uses the lower level of triangular-wave function, you already mentioned. See how the timing information is added to the output of table D 1.

• What is the difference between 6.5.1 and 6.5?

  Hello

  Does anyone know what is the difference between 6.5.1 and 6.5 and the difference between 6.5 and 6.4? Thank you.

  Find out what new sections of:

  VMware vCenter Server Heartbeat 6.5 Update 1 Release Notes

  VMware vCenter Server Heartbeat 6.5 Release Notes

• How to transfer the settings and the new Apple TV 4 applications

  Dear friends,

  I bought a second Apple TV 4 and I need to know how can I transfer/copy settings and the current device to the new applications.  I wish to have two devices with the same settings and applications.

  Thanks in advanced for any help!

  There is no way to copy the settings and transfer one ATV to the other apps.

  You'll have to mimic the settings manually and re - download apps for the new ATV.

• the difference between the intermediate process and materials first in BCP formulation?

  I do not understand the difference between the intermediate process and materials first in BCP formulation. could you give me an example to show the difference?

  The intermediate process - questions all the specifications that are used in the

  current specification.

  Raw - questioned the level of material first in the hierarchy.

  Hello Terry,

  It is used in the screen output Formulation based PCA. You can configure different PCA rule which is available in formulating exit point BOM, then when you start a screen of PCA in the base of the exit, you will see this rule.

  And the difference between the intermediate process and raw in PCA, let me explain with an example, I have a configuration hierarchy as below:

  OutputA

  A formulation

  Material X

  Output B

  Formula B

  Material M

  Material N

  If I select the output B in formulating A framework, and when I run a screen of PCA in the base of the output, I have three options:

  High level - it allows to extract A output attributes as PCA review the settings;

  Intermediate processes - it to retrieve attributes material X and B output like BCP review the settings;

  Raw - it will extract attributes of material X, output B, M and N of material material as PCA review the settings.

  I hope this helps.

  Thank you

  Jessie

• The best way to draw the difference of phase vs. time of two signals

  I have three channels (time, force, displacement) of approximately 1 000 seconds of a sinusoidal test load test data (sampling rate was 100 Hz).  I would draw the difference in phase between the force and displacement (perhaps using a second window 30) according to time.  I tried using a few different analysis functions, but I get what looks like random noise (phase difference between force and displacement is very small and the difference in amplitude is very fantastic - 4 orders of magnitude).  Any suggestion would be appreciated! -Jim

  Hi Jim,.

  The phase channel resulting, that you get with the function FFT DIAdem is in the frequency domain.  If you select a channel data and time in the FFT dialog box, you will get a frequency channel that results as well as the Phase channel resulting.  If you select only a weather channel of waveform data in the FFT dialog box, you will get a Phase of waveform frequency channel resulting.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments