free vSphere Datastore space and the differences in size of VMDK

Similar Questions

• Pixels and the differences in size of document in Illustrator than Photoshop

  Why the pixels of a project in illustrator is different from that of the same proportion of pixel of a project in Photoshop?  Example: A project can in Illustrator can be a work plan of 950px X 950px in 12 inch and Photoshop, this same pixel ratio will be 4 3/4 in.

  The sovereigns in Illustrator are always with a fixed rate of 1 inch = 72 pixels (72 dpi), you can check this by right-clicking the rule and selecting inches or pixels and you will see that 950 px 13.9 inches and 12 inches will not be as you said.

  The ratio of the rulers in Photoshop depends on the resolution of the ppi of the image defined by the user in the Image Size dialog box. If choose Image > Image size and select a resolution of 72 pixels/inch (ppi) will correspond to the ratio of the rulers in Photoshop Illustrator. If you set it to something else, that they will not, in your case with an image with dimensions of 4.75 inches in Photoshop, the resolution will be 200 dpi in order to contain 950 pixels per side.

  When you save an image from Photoshop, which contains metadata, it contains information about the size of the document in inches and pixels. Illustrator will place these images with the size of inches not the pixels in the areas shown on the leaders of the Illustrator, internally, but the image will contain all the pixels, as indicated next to the IPP in the control under the main menu bar when the image is selected. These internal (real) image pixels will be used when printing, and when you zoom in on the screen to display the image. Also if you are copying from Photoshop and paste into Illustrator, he also will stick with the size of the po and not pixels (at least this is how it works with CS5 on Windows)

  If the placed image is without metadata Illustrator will always place it assuming that 72 px = 1 inch (72 dpi). You can check if in Photoshop to save an image using save for Web and devices and choose None for the metadata.

• "C" drive is quickly running out of space, and the figure of 10 GB are rapidly diminishing.

  I have Medion Akoya P6613 laptop running Windows 7

  Reader C says 10 GB to 299 gb is free - apparently quickly running out of space, and the figure of 10 GB fades quickly.

  All the work to record to external hard drive. All my documents saved on hard drive, so nothing is saved on the drive of the laptop.

  It is likely that I have actually run out of space?

  Is it possible that everything is telling me that I am out of space not run correctly due to a fault or other? Everything seems to work OK, just occasional crashes when you use Microsoft Office Outlook 2003.

  Someone suggested I have restore laptop to factory default settings. I don't know how to do this. I know I'm losing everything and am particularly worried about losing e-mail on Outlook files.

  What advice do you have?

  Hello

  This free program allows you to see what is taking place.

  http://www.Jam-software.com/treesize_free/

  Also check how much space system restore uses:

  http://Windows.Microsoft.com/en-us/Windows7/how-much-disk-space-does-System-Restore-require

  _____________________________________

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  _____________________________________

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And Norton Backup, if you are using Norton, can do strange things with filling of hard drive space.

  See you soon.

• good when I have several pictures im by clicking between the spaces and the 2Installez them but theres a lot so I was wondering if there is a way to select and make snap toghter I looked online but no help

  good when I have several pictures im by clicking between the spaces and the 2Installez them but theres a lot so I was wondering if there is a way to select and make snap toghter I looked online but no help

  Yes, you can select a group of items in the project Panel, use of the PLC to the sequence option.

  Neil

• What is the difference between size function and aggragate function?

  Hi Experts,
  
  In OBIEE 11.1.1.6.0, what is the difference between size function and aggragate MDB measure column function?
  If it contains material or detail information, I am very grateful to you.

  Hello

  Good example with screenshots-

  http://www.clearpeaks.com/blog/Oracle-BI-EE/aggregation-based-on-dimensions

  Mark this reply / helped.

  Concerning
  Young

• difference in size of VMDK

  Hello

  I have a question about the size of the vmdk file. I've set up a disc Dynamics 40 GB and installed Vista Sp2 x 64 Home Premium. Space used within Windows is 22.9 GB. But the vmdk 29.9 (see attached photo).

  I compacted the vmdk in the options of the player, but the size has not reduced. Why is the 7 largest GB vmdk?

  Best regards

  System:

  Windows7 Ultimate Sp1 x 64-German

  AMD Phenom II X 4 945 3 GHz - 4 hearts

  8 GB DDR3 1333 RAM

  Radeon HD 5770 1 GB

  Samsumg F3 1 TB

  VMWare Player 3.1.4 build-385536

  Free space on the file system of the client must first be cancelled and this is normally done using the retractable function, which the two zeros out of free space and the Covenants of VMware Tools in the guest operating system when supported otherwise another method of zeroing on the free space should be done before using the Compact command.

• 20 GB difference between space and the sum of all files

  my c: drive displays of 42.5 GB used space. the sum of all folders on the c: is 22 GB. make all the folders and files not hidden. I just deleted a user account. the files could still be in the cache somewhere? recovery partition is less than 1 GB. Thank you!!

  To study disk space, use download and install Treesize (freeware).
  http://www.Jam-software.com/treesize_free/

  Information about Treesize
  http://www.Jam-software.com/treesize_free/

  When you open Treesize scan select in the Menu and you will see a list of drives. Click on C and it will generate a list of files.

  Display names and 6 larger files sizes and the total at the top of the list.

• Running out of disk space and the need to remove the old clichés

  I recently joined a company owning an ESXi 4.1.0 (build 260247) server with 4 500GB data warehouses.  One of our servers main database (Ubuntu/Postgres), which uses only one of the data warehouses (4 datastore) has 21GB 465 GB free.  It is currently configured to store all settings, storage and snapshots on this unique data store.  The hard disk is configured as thin.

  The virtual machine has crashed a few days ago, when it ran out of disk space.  We removed a small second partition (which was in the same data store) and cleared space, but we receive extremely weak with only 5% of the data left store.

  I have read many posts and wanted to get the opinion of this community before I move forward.   Because we do not use the 4.1 last I heard some issues using the option "Remove all" that it may require more disk space and others recommended to manually delete snapshots from the closest to the base, but it seems that in this case it can merge the snapshot with the original without freeing all the space.

  We are not all of the snapshots and I'm fine with delete them, but I assure you we will not run out of disk space in the process and complicate things further.

  It is best to manually remove these snapshots starting with the one closest to the base or by using the "Delete All" (or something else)?  In addition, if we go with the manual option, is it possible with the virtual machine upward or do we need to close first?

  Current snapshots:

  

  Current data warehouses associated with VM (really unique using the 4 data store)

  

  Actual files on the data store 4

  

  Thank you

  Brandon

  Welcome to the community,

  After the screenshot, your virtual disk 'arrow_db1.vmdk' stocked thickness!

  With the thick disc service and ESXi 4.1 (the problem with "Delete All" is related to version 4.0), you can run safely "Delete All". However, due to low disk space, I recommend that do you with the virtual machine off. If turned on, a new temporary snapshot will be created, which - according to the workload of the virtual machine - can grow and fill in the data store.

  Due to the size of snapshot and depending on the speed of your storage space, you need to plan a few hours well downtime.

  André

• How to free up disk space for the database file

  Hi experts BDB.

  I use bdb4.6.21 transaction Btree access method, found that after vacuum db db-> truncate, the size of the db file has changed. How to free up disk file db space? It can be configured?

  Thank you

  Min

  Hi Min,

  What Mike says is that you do not expect that the empty space after an operation of truncation (for example a delete or update that empties a page) in the database (empty pages) to return to the file system and therefore to see the physical file size decreases.

  The next section of the documentation explaining this: required disk space

  Space released by removing the key/data pairs in a Btree database or Hash is never returned in the file system, even if it is reused when possible. This means that the databases Btree and hash are to develop alone. If enough key is deleted from a database which shrinks the underlying file is desirable, use the DB-> compact() method to recover disk space. Alternatively, you can create a new database and copy the folders of the former into it.

  
  

  So, as Mike suggested, you can dump and reload the data into a new database, or copy data from the existing/old database to a new (to remove the old database and rename a new one the old name), or you can try to compact the database using the method compact().

  If you use compact(), then in order to force the return of empty for the file system pages when possible, use the DB_FREE_SPACE flag and try to avoid using an explicit transaction (use a NULL tnxid pointer, so this BDB will use internally of several transactions that will be engaged periodically to avoid locking large sections of the tree).

  When you use the compaction in order to free up space and return pages from database empty in the file system that it is generally recommended to repeat Compact with a value low 'compact_fillpercent '.  In addition, the following output statistics fields in the structure DB_COMPACT, compact_pages_truncated and compact_pages_free should be examined to determine if there is a point, continuing to run the compaction with the same compact_fillpercent.  If the values are strict positive it is then compact() calling again with the same compact_fillpercent (and specify the DB_FREE_SPACE flag).  The compact algorithm allows a single pass on the pages of the database;  pages so not empty at the end of the file will prevent the free pages (which are placed on the free list) to be returned to the file system.

  Kind regards

  Andrei

• Working space and the planning of the URL does not not after change of IP address

  Hi all

  I use 11.1.2.1 and recently the IP addresses of the servers have changed. Because of this schedule and the workspace URL does not work, although EE and shared services work. If I run the URL of space working everything freezes (EAS and shared services) and I have to stop/start services.

  Please suggest how to solve this problem.

  Thank you

  MK

  Well there is your problem then

• I m going in circles on this site from adobe.  I need to ask for a free upgrade to lightroom and the insturctions tap 'orders and "returns" which doesn't seem to exist.

  I just need the exact web address to request a free upgrade.  Why is it so difficult?  I've been circling on this web site for more an hour and the end upward to the same page before each time.

  Please tell me how to reach a real man live!

  Thank you for your response.  While I was posting here, I finally got a response to my question of the cat.  Chat and download a copy of my Bill, I was able to get a promise of an update to lightroom for 6 of 5.7.1 which I just bought.  I couldn't have lightroom to make recognition of face and then realized it was an old version.  Fortunately, but after 2 hours on the site, I managed to get a promise that the disc is mailed.  I never found my way around this hostile web site.  But now I can ignore it for awhile.  Thanks again for your response.

• Use of space and the SYSTEM tablespace

  Hello
  
  OS = windows = 11g DB
  
  I wanted to create a table of 600 MB in users tablespace for some tests. But by mistake I created it in the tablespace SYSTEM that I was connected with sysdba.
  
  It did not work due to errors. I dropped the table simply but I have observed that this space of 600 MB was restored. There is 1 GB of space on my D drive before this creation, but even after a fall shows only 300 MB approximately
  
  Please suggest how I can claim that space of the SYSTEM tablespace, which is totally unnecessary, and that I can test it again in a different tablespace.
  
  Thank you very much.
  
  B/R
  KAM

  You must resize the data file for the SYSTEM tablespace.

  Select file_name in dba_data_files where nom_tablespace = 'SYSTEM '.

  alter database datafile 'xxxxx' 500M resizing;

• Unlike COUNTY and the difference in data between 2 sets of data

  Hey guys,.
  I have a question here, probably, it revolves around the UNION, INSERSECT and LESS and maybe something else I'm missing.
  
  I'm two sets of questions, and I have 2 paintings.
  

  select count(student_id) from adhoc_student_table1;
  select count(student_id) from adhoc_student_table2;
  
  select student_id from adhoc_student_table1 order by student_id;
  select student_id from adhoc_student_table2 order by student_id;

  These tables contain data and have been sorted by student_id. I want to find the difference in NUMBER between the first set of SELECT and I want to find a difference in the student ID in the second set to SELECT.
  
  Any ideas? As always, any help is appreciated!

  Hello

  These tables do contain data and have been sorted by student_id. I want to find the difference in COUNT between the first set of SELECT and I want to find a difference in Student IDs in the second set of SELECT.
  

  Hope this helps

  select (select count(student_id) from adhoc_student_table1) -
     (select count(student_id) from adhoc_student_table2) from dual
  
  ---If you want the difference in first table not available in second table.
  
  select student_id from adhoc_student_table1 order by student_id
  minus
  select student_id from adhoc_student_table2 order by student_id
  
  -- or you wanted the difference from both table.
  with tab1 as
  (
     select student_id from
        adhoc_student_table1
  )
  tab2 as
  (
      select student_id from
  adhoc_student_table2
  )
  select * from (select student_id from tab1
                       union select student_id from tab2)
  minus
  select * from (select student_id from tab1
                      intersect select student_id from tab2)
  )
  

  If you could post the input samples and expected, maybe you can get a more valuable solution.

  Concerning
  Anurag Tibrewal.

• Size of the placed Image and the difference in quality

  Hello world

  I'm under Indesign Adobe cs6 Version 8.01

  I have a document which is 2048px x 1536px (for iPad resolution Retina display).

  I reszied all my images to about 1140px x 760px at 300PPI

  When I place images in Indesign it resizes the image to 180px x 272px

  The number of effective pixels and actual pixels are 300 PPI resolution that I've resized the in photoshop under the links section

  The quality of the preview is set high quality

  In the File Handling preferences preserve Image Dimensions when the restoration of the links are on

  I tried to save the image in Jpeg, Tiff and PNG formats to solve the problem

  I set my default object style Frame Gun on site and be sure to adjust automatically is checked and the editing of content is set to None.

  What can be done to rememdy this problem?

  I want just the images that I've resized in Photoshop CS6 to be placed in the exact dimensions that I've resized to do the set up files simple and easy.

  If you can please help with this problem as soon as possible I would be very happy.

  Thank you very much

  Save images to 72 dpi (without resampling), or their scale in ID.

• When I open app SPACE DRIVE LOW that there is not enough space for your project on this device, please free up some space and restart the application?

  

  Hey toona10508244!

  Have you tried to remove some old apps/photos/music? This should help.

  Let me know!

  -Kathleen