Similar Questions

• free vSphere Datastore space and the differences in size of VMDK

  I am listing and sizes VM reports and the amount of space they take on their related data storage. I used PowerCLI to capture this information and have issued the following command to retrieve the data store size and free space: Get-data store. Returns a name, quality and free space. Then, I want to see the size of the VMDK on these data stores using the: Get-Datastore. Get - VM | Get-hard drive. This returns the size VMDK in KB and after you convert in the UK, I sum up the totals and calculate space to subtract from the total size of the data warehouses. I have a lag in information in free space. For example:

  Name FreeSpaceMB CapacityMB

  vSphere 1 63634 511744 storage

  vSphere 2 60576 511744 storage

  The data that I get of you add up all the VMDK located on these two stores of data then subtracting total capacity does not equal free space above. I did this on our entire VM infrastructure and continue to run on this issue. The VMDK must reside somewhere, so why they bring two different digits? Is there a any correlation between the VMDK size and free space? Often my data are disabled by nearly a terabyte.

  In this case less than 50 GB, remember to file vswp, etc.

  But sometimes report is simply wrong in vSphere Client, you can get accurate information in the service console.

  ---

  MCSA, MCTS Hyper-V, VCP 3/4, VMware vExpert

  http://blog.vadmin.ru

• Is it possible to draw pixel and the SNES on top a picture full resolution in Photoshop or any other program?

  Hello. I was wondering if it is possible to set a picture (at full resolution) as a background and draw on it with pixels. For example, if I have a picture of a mountain. Could I add that in Photoshop and shoot to make 8-bit?

  It is an interesting question.

  You can do several strategies:

  1. If you want to go in the artistic sense, make a square using the tool brush pen, not the Brush tool.
     Then always change the color and the tool selector pen to color and put the color in the photo.
     As an aid, you can use the raster leaders who have the same distance as the size of the enclosure.
  2. The next strategy is the Pixelate filter (Mosaic): How Pixelate in Photoshop - YouTube
  3. Another strategy is to resize the image. Firstly the scale down, to create the actual pixels. And then scale upwards, but with the option of the nearest neighbor.

  Have fun.

• What is the difference between size function and aggragate function?

  Hi Experts,
  
  In OBIEE 11.1.1.6.0, what is the difference between size function and aggragate MDB measure column function?
  If it contains material or detail information, I am very grateful to you.

  Hello

  Good example with screenshots-

  http://www.clearpeaks.com/blog/Oracle-BI-EE/aggregation-based-on-dimensions

  Mark this reply / helped.

  Concerning
  Young

• Need help with JavaScript web application form.  Need to limit the pixels and the size of the image

  I build several forms for www.iswapusa.com and on the site, visitors are asked to upload images, I want to restrict the width in pixels max 400 pixels and size to maybe 1 MB to 3 MB of the file images if possible.  If there is a code to do this, please let me know and where do I put it on business catalyst system. to work with forms I create or even if I have to give to each form.  The forms are available from one of these pages offer commercial or Non-commercial offer.

  I found the answer to my problem.  It is not a java solution, but a simple code.  You can create in your retail or list view depending on where you want the images appear of your form will be mailed.  the answer was in a previous post, and the link is:

  Dynamically generating thumbnail images

  The code I used was:

• Size of the placed Image and the difference in quality

  Hello world

  I'm under Indesign Adobe cs6 Version 8.01

  I have a document which is 2048px x 1536px (for iPad resolution Retina display).

  I reszied all my images to about 1140px x 760px at 300PPI

  When I place images in Indesign it resizes the image to 180px x 272px

  The number of effective pixels and actual pixels are 300 PPI resolution that I've resized the in photoshop under the links section

  The quality of the preview is set high quality

  In the File Handling preferences preserve Image Dimensions when the restoration of the links are on

  I tried to save the image in Jpeg, Tiff and PNG formats to solve the problem

  I set my default object style Frame Gun on site and be sure to adjust automatically is checked and the editing of content is set to None.

  What can be done to rememdy this problem?

  I want just the images that I've resized in Photoshop CS6 to be placed in the exact dimensions that I've resized to do the set up files simple and easy.

  If you can please help with this problem as soon as possible I would be very happy.

  Thank you very much

  Save images to 72 dpi (without resampling), or their scale in ID.

• PRE 9 - Photos - recommendation of the pixel and the resolution setting

  I would like to integrate photos between video segments, as well as on the actual video.  Before to put these photos in PRE 9, what should I resize pictures (pixels and resolution). I use Premiere Elements to resize photos.   I am burning a DVD HD at 1920 x 1080 pixels.

  Thank you.

  I agree with Neale. Scaling the EPS/PS images, just the pixel x pixel dimensions that you need will do two things for you: you get the best quality and eliminate excessive, pushing a bunch of unused pixels around. This ARTICLE will give you more. Note: he started, before HD took over the market, just so read all the dimensions of 720 x 480 to 1920 x 1080 (in your case). I then have to add comments on the HD, but some get confused, when they see the 720 x 480 at the beginning.

  Good luck

  Hunt

• Unlike COUNTY and the difference in data between 2 sets of data

  Hey guys,.
  I have a question here, probably, it revolves around the UNION, INSERSECT and LESS and maybe something else I'm missing.
  
  I'm two sets of questions, and I have 2 paintings.
  

  select count(student_id) from adhoc_student_table1;
  select count(student_id) from adhoc_student_table2;
  
  select student_id from adhoc_student_table1 order by student_id;
  select student_id from adhoc_student_table2 order by student_id;

  These tables contain data and have been sorted by student_id. I want to find the difference in NUMBER between the first set of SELECT and I want to find a difference in the student ID in the second set to SELECT.
  
  Any ideas? As always, any help is appreciated!

  Hello

  These tables do contain data and have been sorted by student_id. I want to find the difference in COUNT between the first set of SELECT and I want to find a difference in Student IDs in the second set of SELECT.
  

  Hope this helps

  select (select count(student_id) from adhoc_student_table1) -
     (select count(student_id) from adhoc_student_table2) from dual
  
  ---If you want the difference in first table not available in second table.
  
  select student_id from adhoc_student_table1 order by student_id
  minus
  select student_id from adhoc_student_table2 order by student_id
  
  -- or you wanted the difference from both table.
  with tab1 as
  (
     select student_id from
        adhoc_student_table1
  )
  tab2 as
  (
      select student_id from
  adhoc_student_table2
  )
  select * from (select student_id from tab1
                       union select student_id from tab2)
  minus
  select * from (select student_id from tab1
                      intersect select student_id from tab2)
  )
  

  If you could post the input samples and expected, maybe you can get a more valuable solution.

  Concerning
  Anurag Tibrewal.

• The printer page size setting does not work in Photoshop 5.1 with printer Xerox

  I am trying to print a size over 8.5 x 11 and Photoshop will not change the size, even if the setting of the printer is now in the largest size.  Illustrator and other programs will print but this Photoshop fails.  This is a problem in 32 and 64 bit versions.  Help!

  I found the following on the Xerox site... hats off to T Robinson:

  Re: Photoshop CS6 on Win 7 x 64 only prints the format letter on Workcentre 7655

  20/03/2013 12:28

  We have a Xerox WorkCentre 7435 PCL6, and I had a similar problem. I found a workaround in Photoshop CS5, I will describe where it is useful to others. I just upgraded to Photoshop CS6 however, and workaround no longer works with it. Instead, I get an error message if I print a report of the story of Job. The message is partially cut off at the right margin of the page, but the part I read says: "done with error(016-799): print educatio... failure detected in decomposer.» (The selection button indicates the part of the message that is cut off. What follows it appears on the next line down. I downloaded all updates to CS6 to see if that would help, but it didn't.

  Here's the solution that worked for me on CS5:

  1) click on "Printer setup" in the print dialog box

  (2) on paper in the drop-down menu, select 'Advanced paper selection.

  (3) select the status bar where your tabloid (or legal) size of paper is loaded

  4) click the button at the right end of the "Paper size" field to display the paper size dialog box.

  5) click on the down arrow button at the right end of the field 'Of the Original Document size' and select 'Tabloïd' (or 'Moral') in the menu.

  6) click OK to close each of the open dialog boxes until you return to the print dialog box and print your document. Print preview should update to show you a preview which reflects the selected paper size. (This can take a few seconds to arrive).

  It worked for me in CS5. Unfortunately, as indicated above, it doesn't seem to work on the CS6. The only solution I can offer for CS6 is to save the file as a PDF and print from Acrobat. It works without problem, but there are a lot of trouble to go whenever I need to print something other than letter size.

  If someone finds a better solution to workaround in CS6, let me know.

• What is the limit of size of document to Echosign

  I have a document I need signature, but the tool came back and said it exceeded the limit.

  (1) what is the limit

  (2) can it be increased

  Hi trevorm19501557,

  Is 5 MB size limit of the documents to the user of a free account & for the Pro account is 10 MB.

  KB doc. using FAQ | Adobe Document Cloud eSign services

  Kind regards

  Nicos

• top of page disappeared and the very small size

  I put my cursor at the top of the screen to get the web browser, otherwise that he is not here. In addition, the font size of my home page and all the pages I browse for firefox are very small. It started after the update.

  Press F11, which activates / deactivates the mode full-screen.

  The Firefox Page Zoom feature makes a domain level by area to save favorite settings level users zoom, there is no default Page Zoom level setting in Firefox, as with some other browsers.

  Try the extension Default FullZoom Level:
  
  https://addons.Mozilla.org/en-us/Firefox/addon/6965

  Or the NoSquint extension:
  
  https://addons.Mozilla.org/en-us/Firefox/addon/2592/

• Performance of Windows 7 and the differences of 32 and 64-bit...

  Here you can see the performance from one version to the other differences in the assessment of the experience with Windows 7 at his little two versions 32 and 64 ultimate.

  http://1.BP.blogspot.com/_vQInzvdaQQ8/Ssp4QUm7ylI/AAAAAAAABcE/aV82zFxifh8/S1600-h/Sistema64Bits.PNG

  http://1.BP.blogspot.com/_vQInzvdaQQ8/Ssp4MsJ27PI/AAAAAAAABb8/XSmlARqrcEQ/S1600-h/32bitsimage.jpg

  Post edited by: merlinpat

  32-bit operating systems are limited to 3 GB, but the performance is similar in Internet/desktop applications every day.

  If you do a lot of creating media (e.g. video coding high definition or music production), 64-bit would be a better option.

• Keep the Image in the header and the text appearing in printed documents

  Hello

  I have RoboHelp9. I added a logo and a title to a master page and applied this master page to all the topics in my project. I wish that this header appear in the online version of my output. However, I wouldn't like this appear in the printed version. When I generate a PDF, the logo and title appears before each subject. How can I prevent the master page header to appear in literature printed, without affecting the output online?

  Thank you

  This sounds like you apply a conditional tag to build the items that you want to appear online. Then in the scheme of the single source for your printed documents, exclude that build the output tag.

• BlackBerry Smartphones what the purpose and the difference between Blackberry devices and software updates to the Blackberry Manager?

  I got my new Blackberry Curve 8330 3 weeks red and I installed the BB Desktop Manager that comes with the CD called Blackberry user tools.   Now when I click on "updates" on the lower part of the Desktop Manager, a popup window with all sorts of information that I don't know where to go first.  My version of the op is a 4.3.0 xxx what is desktop software for? Is this software integrated with the Desktop Manager, or is it a separate thing?

  Hope to hear from you beautiful peeople soon to explain this for me!

  Not necessarily. I'm a tech person, so I'd rather have the latest greatest version of ang of the software I use. So if you are happy with 4.3 and it is not crashing or causing errors so feel free to continue using it.

  You can always try 4.7 and if you don't like it uninstall and reinstall 4.3

• Type of failover and the difference

  Hello

  I would like to know what are the different type of failover in PIX 515E with 6,3 OS.

  I want all the details of it.

  I am aware of LAN-based failover and failover with cable to failover.

  Why the failover cable is use and it is important.

  can any 1 give me details.

  Kind regards

  Riahi

  Hello

  hope this link helps.

  http://Cisco.com/en/us/products/sw/secursw/ps2120/products_configuration_guide_chapter09186a008017278a.html

  regds