Copy of Documents of legal size on HP Officejet PRo 8600 Premium

Similar Questions

• OfficeJet Pro 8600 Premium - paper tray automatic selection according to the size of the paper

  OfficeJet Pro 8600 Premium, Windows 7

  How to setup the printer such as when I'm sending a legal document that automatically selects the tray 2 (legal paper in tray 2). Tray 1 is the default, with letter-size paper tray. In 'device settings' Tray 1 is set to letter and tray 2 has the legal value.

  Thank you!

  Greg

  Hi Greg,.

  At present, the 8600 does not support this feature of Microsoft. Unfortunately, there is no work around. You must manually select tray 2:

  1 Ctrl + p to open the print dialog window.

  2 Select the printer of desire and click the preference.

  3. go tab paper/quality, then select "Tray 2" on the decline of the Source of the paper in the menu dropdown.

  See you soon,.

  Kimu

• HP Officejet Pro 8600 Premium - black line on pages that pass through the document feeder

  Hello! I have a HP Officejet Pro 8600 Premium. Any time that I scan, fax or copy via the document feeder a black line appears on the document created. Anyone know how to fix this?

  Thank you in advance,

  Lynn

  Hello Lynn_Fritschi.

  I see that you encounter errors of quality on your prints when you use the Officejet Pro 8600.

  Here are two links that should be useful for you. The first is to support your product page and the second is a document that explains errors output quality and the ways to solve them.

  HP Officejet Pro 8600 Support

  Vertical stripes, lines or streaks on Copies, faxes or scan

  Please let me know if they help you.

  -Chauntain

• OfficeJet Pro 8600 Premium: When copying from the plateau the copier will print only 1/8 of page, then stop.

  Copier is towards the top sometimes & don't print that page of bucket 1/8, Athens he spits as if this one ends. Have unplugged the power cord & reconnected. Ran scans printhead & alignment. Off all night. All the ink levels are good. Still has not corrected it.

  Print an entire page of the screen of the computer without problem. Printing problem just go flat.

  Hi @Wendy-needshelp,.

  Thanks for joining the Forums of HP Support for a solution to your problem copying.

  I understand that you use a HP Officejet Pro 8600 Premium e-all-in-one with a computer and Windows 7 when you copy from sometimes flat it will only copy and print 1/8 of the page. I would like to help.

  You mentioned having unplugged and replugged the power cord. This is something that could be done. If you can, I reset the power and try to connect the printer directly to a wall outlet, if you currently use a protector or electrical surge extention. Sometimes the surge protectors can limit the amout of the power supplied to the printer.

  

  There was an update firmware released in April, which can help your printer. You can download the update of the firmware and run it from your computer to install it on the printer. You can go to the HP Officejet Pro 8600 N911g_n Firmware download page by clicking here.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• Cannot select tray 2 copy with Officejet Pro 8600 Premium

  Win 7, 64 bit

  OfficeJet Pro 8600 Premium

  I installed the drivers on the disk supplied in the box. (Not sure if there is a new driver or an update yet for this product.)

  I bought this printer so that I could load my UPS package labels into a bar of tasks and plain paper in the other.

  I loaded the labels into Tray 1 (according to instructions) and paper in tray 2.

  I have everything works fine except that I can't understand how to specify tray 2 as the tray to make copies of. In respect of the COPY > SETTINGS > SET SELECT only Tray 1 is displayed.

  Issues related to the:

  (1) why not tray 2 option to copy? How can I fix it? A firmware update maybe?

  (2) printing these UPS labels from tray 2 seems to work very well. Is there a reason why this would be bad?

  Thank you!

  Connected by ethernet cable, he downloaded the new version of the firmware (... 1136BR).

  That fixed it! Tray 2 is now an option under settings to copy.

  The only disappointing is that I asked about a new version of the firmware in my first question... but it took a whole week to get this resolved... and I had little to get to the answer myself!

  In any case, now it is fixed and seems to work very well.

• OfficeJet Pro 8600 Premium can scan double-sided legal format of the ATF documents?

  I can't get the award-winning Officejet Pro 8600 to scan one side of a document of legal size of ATF.  I use Panel of the printer to scan to computer and save to the PDF format.  I select original: two-sided in the Panel.  The printer will scan only on one side and an error message appears saying that the tray supports that double-sided scanning for certain sizes of paper.

  Hello

  Thank you for your message.

  Unfortunately, the ADF can scan only 1-sides for legal-size documents.

  You can, however, use the software to "Add pages" using glass as the example below.

  

  Hope that helps.

  Please click "Bravo Thumbs up" on the left, if it helped you and 'Accept as solution' If this helped solved your problem.

• How to print on legal paper with my Officejet Pro 8600?

  I have an Officejet Pro 8600.  It has a single paper tray that will not grow to hold legal size paper.  I could stuff a few sheets of legal size paper in the tray and close it, but the printer will print only top 11 "of the page.  What can I do to be able to print the full 14 "?

  Hello

  In my view, it will be. Remove all the paper and pull on the status bar, you can see in the lower part (part blue/cyan) which allows you to extend the status bar to accommodate legal size documents.

  Kind regards.

• HP Officejet Pro 8600 Premium copy Question

  I just bought a HP OfficeJet 8600 Premium.  I have legal paper in tray 2 and stationery in a status bar.  It can automatically select what size paper he needs or do I need to change it every time I have copy these items?

  Hi Vonnie52,

  If you happen to run across the following problem with tray 2 not detected on your Officejet printers, try the following steps that should help solve the problem.

  (1) turn off the printer

  (2) pull tray 2 completely out.

  (2) turn on the printer without 2nd tray

  (3) turn off the printer

  (4) install 2nd tray

  (5) turn on the printer

  Set the default tray to make Copies:

  Try the steps I provided below and let me know if this worked for you. My current setup for premium 8600 goes like this.

  Impression of the PC: Tray 2 is set as default Type on paper: plain paper

  Copy of the printer: Tray 2 is set as default Type on paper: plain paper.

  Tray 1 contains photo paper, tray 2 contains plain paper.

  This way when I print from the PC it always pull out tray 2 unless I select manually 1 tray to print photos. The same for Copies, when I make a copy he always starting from tray 2, unless I manually select to pull from Tray 1.

  Tray 2 as the default value for the copy configuration steps

  1. press on copy

  2. tap on settings

  3 change the Type of paper in paper-regular

  4 change Select tray 2 tray

  5 scroll and select set as new default.

  Press home to return to the home screen. Press copy, tap Settings and check if Select tray is always tray 2. The current version of the firmware on my printer is CLP1CA1136AR. You can check your firmware version by printing the printer status page in the Setup Menu.

• HP Officejet Pro 8600 Premium: Printer leaves black lines during copy and scan from ADF

  I know this question has been asked several times, but whenever I try to copy or scan from the automatic document feeder, it leaves black lines on the copy (with the document on the works of glass like a charm).  I've read through the forums and have tried the advice to unplug the machine and so on, but none of these suggestions work.  Any help would be appreciated.

  Hey @Huskers1,

  Welcome to the HP's Support Forum!

  I see that you have some problems with a line when copying from the document on your Officejet 8600 Premium feeder e-all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Get a little water and a lint cloth.
  2. Open the left upper part of the printer, where the document since the charger goes into the printer. It should open up as you opened a book.
  3. With your damp cloth wipe the rubber stamp, the rollers in the cover and the casters on the bottom of this section.
  4. Again open the left side of the printer, as you opened a book.
  5. With your damp cloth, wipe the rollers, you will find inside this section.
  6. Close the upper sections of the printer and open the flat section.
  7. With your damp cloth wipe the rollers and the white bar you see on top of the printer
  8. Clean the glass on the left side of the printer.

  Once all the pieces you cleaned dry, please let me know the results. If you remove the line, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• hp officejet pro 8600 premium: lines when scanning or copying using the ADF.

  I get a black page line everytime I try to copy or scan using the ADF. I tried to unplug the printer for 30 seconds and in him plugging everything into a wall as stated in a previous post. I also cleaned the glass for scanning.

  Hi RedShawLaw:

  Please follow the steps in troubleshooting found here.  The ADF uses a specific area of the glass.  A small piece of dust or smears may affect ADF scans, so special attention to the cleaning instructions part.

• OfficeJet Pro 8600 Premium error paper size does not match

  I try to print an envelope #10 that I printed several times in the past, but today I get the error that the detected paper size does not match.  I print on MS Word with the selected for the #10 envelope paper size.  I loaded the envelope properly.  Why is he not feel today when it was fine yesterday?

  Hello

  The application, go to Printer preferences. What size and type of paper is selected here?

  You have restarted your computer since yesterday?

  Thank you

• OfficeJet Pro 8600 Premium: centered on the black vertical line on copy the view when using the auto doc feeder

  This just started happening in the last two weeks. Whenever I have to SCAN using the ADF, a black line runs from top to bottom. I cleaned the glass to the left of the flat glass and cleaned the white strip above the glass on top of the printer that opens. The community has it any other suggestions or experience with this issue? The printer is about 2 years old.  Thank you!

  I looked back through the forum and found a great Bob Headrick troubleshoot in 2008. This allows to calibrate the printer has been the answer for me. Thanks Bob!

• Not completely scan legal size with Officejet Pro 8600 more Documents

  I'm trying to scan legal documents of sizes on my Officejet Pro 8600 Plus new. I have gone through the forums, and this has been a recurring problem in the past (see link- http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/Scanning-Legal-Size-Documents/m-p/35416#M14...   ), but doesn't seem to be resolved. If I use the document feeder or glass, the paper is cut down and seems to be stopping at the "A4", legal vs. size. I can't find any setting on the scanner itself, or in the HP Utility software to change this, or even to be able to identify the current configuration, if it is a.

  I use a Mac Pro, system 10.6.8 just installed and started using the printer a couple of days, and everything is up-to-date software-wise. Everything else on the machine works beautifully.

  Can anyone identify what is happening here and how to fix?

  Thanks for your help - I chose precisely this particular unit on the next model down because of the glass/size bed legal, and if I can't use it to scan legal documents, well, it's a problem. Thanks for your help!

  Hello

  Please, try the following steps:

  1 open the HP utility and select your device.
  2. based on Scan Settings open the "Scan to Computer".
  3. click on the tab "scan tasks.
  4. Select the shortcut Scan allows to analyze, and then click on edit.
  5. in the section of scanning from an HP device, click the blue triangle to expand the menu.
  6. in the expanded menu now, open the drop down next to cultures in and set as none.
  7. click OK and try to scan the image.

  Please let me know of any changes,
  Shlomi

• Single line vertical when using the ADF to Scan or copy on HP Officejet Pro 8600

  Printer HP Officejet Pro 8600 Premium (CN577A)

  OS: MS 7 64-bit

  When you use the ADF for my printer HP CN577A Officejet Pro 8600 Premium, I get a single vertical line on the document which is produced. This occurs when copying or scanning, both black and white and in color. If I scan or copy using the glass, I do not get the vertical line.

  I already tried troubleshooting.  I unplugged the printer, left without electricity for several minutes; that didn't fix the problem.  Then, I cleaned the rollers and glass; I always get the vertical line, but only when using the ADF.

  My firmware version is up to date (CLP1CN1150CR).

  What should I check next?

  The only difference between the ADF and scanning flat, from a point of view of the scanner is there on the glass, it happens.  I suggest you get a bright flashlight and examine the corresponsing area hence is the line, it's almost certainly a spot on the strip of thin glass which is being just in the right place.

  I've seen some people suggest that put a flashlight almost parallel to the Strip, it shines from the bottom can highlight the area problem.

• Officejet Pro 8600 custom paper sizes

  I just replaced my Officejet Pro 8500 with a 8600.  I NEED to print on paper that is 4.88 "x 8.25".  How can I get the printer to accept this paper?  I use Word 2010 and that you set the paper size in Word, but the printer indicates the paper size does not match.

  The solution by the user "Kicktires" in this thread:

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/how-to-print-on-custom-size-paper-with-OfficeJet-Pro-8600/TD-p/2951487

  has worked for me on my Win7 system and authorized to define me custom paper sizes for my Officejet Pro 8600 more.  Good luck!

  -Don