Copy of file an illustrator to an other all fake pasta... help!

Similar Questions

• I am trying to format my PC and when the installer loads of my key USB Kingston, he said: Setup cannot copy the file XPtspCom.inf.

  Setup cannot copy the file XPtsp Com.inf

  Hi all!
  I try to format my PC and what configuration is loading my Kingston USB key, said he: Setup cannot copy the file XPtspCom.inf.

  I use Windows XP Professional Edition SP3.
  How do slove this problem please to continue to work with my PC?
  Thanks in advance!

  You should not use these programs, but if you want a USB key to install then you should make an ISO file and then using Unebootin according to me this is a best software to USB for xp and if you have windows 7 installed in one of your system, then you can use tool usb windows 7.

• "Storage insufficient to create the shadow copy storage file or other shadow copy data"(0x8004231F). "

  I have Windows Vista Home Premium (32 bit) and you cannot create a system restore point.  Despite all attempts, I keep getting the error message "storage insufficient to create the shadow copy storage file or other shadow copy data"(0x8004231F). "  There is a large hard drive space (90 GB free with)< 70="" gb="" used). ="" how="" can="" this="" be="">

  Hi rebick,.

   

  Welcome to Microsoft Answers Forums.

  We would like to get more information about you to help solve your problem. You better, please answer the following questions.

  • When was the last time it worked?
  • Remember to make changes to the computer recently?

  First of all, I would say that you unplug any external drive connected to the computer except the keyboard and mouse.

  This error message can occur if there is some system files corrupted on your computer. Suggest to run a SFC scan, which would be a search for system files corrupted on the computer and replace them.

  Scan SFC enforcement procedure:

  1. click on the Start button

  2. on the Start Menu, click all programs followed by accessories

  3. in the menu accessories, right-click on command line option

  4. in the drop-down menu that appears, click the "Run as Administrator" option

  5 If you have the enabled User Account Control (UAC) you will be asked to consent to the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  6. in the command prompt window, type: sfc/scannow then press enter

  7. a message is displayed to indicate that "the analysis of the system will start.

  8. be patient because the analysis may take some time

  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue

  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  11 after the scan finished, close the command prompt window reboot the computer and check.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista.

  For more information please visit the link below.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212

  If the step above does not resolve the issue, I would say that you create a new user on the computer account.

  Log on to the new user account and check if you can create a system restore point.

  1. Open user accounts by clicking the Start button, clicking Control Panel, clicking user accounts and family safety, then clicking on user accounts.
  2. Click on manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. Click on create a new account.
  4. Type the name you want to assign to the user account, click an account type, and then click on create an account.

   http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• : Home Premium SP1 Win764() how to copy my files to other users on the same computer accounts.

  I have only one office, where I use a user account and two accounts 'administrator '. There is no residential group. Is it possible to copy files from one of these accounts to another?

  I have only one office, where I use a user account and two accounts 'administrator '. There is no residential group. Is it possible to copy files from one of these accounts to another?

  I am tempted to say yes, "it is". However, given that you probably want to ask HOW do, that is: open a session under an administrator account, then copy the files to any profile folder to any other profile folder.

• The behavior of copy (.png files) screen when using TextEdit and printing

  I have long used the method to copy and paste texts and/or pictures to TextEdit and print files .rtf or .rtfd below:

  I use the command-control-shift-4 and the cursor to select things and paste into TextEdit.

  That stopped working in the Sierra.  I tried several methods (PDF format conversion, fall in Pages and Numbers, for example), but nothing worked: the Canon PIXMA MX922 printed on a white sheet and left the box of small characters with text "filter impossible."

  There is no new printer driver on the Canon site; However, there is a new driver IJ Scan Utility and I downloaded it already after that installation of Sierra and the scanner works fine, as also directly print something (e.g. on the Web).

  Now, after several days of testing and I was wondering, I tried this yesterday:

  Instead of the above command, I used (which I do when I want to save it to the desktop) command + shift + 4.  I copied the file .png from office, dropped in the TextEdit, printed, and... IT WORKED.

  Copy and leaving fall directly in the TextEdit and printing, is so not working, but let fall the same screenshot on the desktop and copy and paste into TextEdit and it print shops.

  I noticed several other annoying problems to Sierra, some I've reported here (communities), some didn't.  Business-as-usual: first version of an upgrade is full of bugs, which 'disappear' in future versions, until a new update is made available, the loop continues, continues, and...

  He works here.

• How can I copy SOME files to email from an old backup profile

  I have a folder created under one of my accounts named Archive. In it I have subfolders for previous years. I discovered that they are all absent.

  I have a backup months full profile, but these records of the previous year would still have their content.

  How can I get these files (or therir content in my current profile that has the same name?

  In the Mail subdirectory other subdirectories with the name of the account of archives and of those who should be without extension and other files with the same name but with the extension .msf. Copy these files without extension in the account called the backup Archive to the current profile.

• copied password files doesn't work is not on the second PC

  I looked at information about files of password for FireFox 3.6.x on the web... it's my understanding that it's all in the files key3.db signons3.txt. However, when I copied these files to a FireFox 3.6.x instance on a second PC and launched FireFox, the list of password (under Security) was empty. What other files or procedures are required to export/import passwords from one PC to another?
  In addition, it would be nice to have this feature added to the UI of FireFox in the native address... I'm not comfortable with using an add-in for it that you can never be sure that your passwords are not compromised by the add-in program.

  Firefox 3.6 does not use key3. DB, instead it uses signons.sqlite. You must copy this file and signons3.txt

• ENVY of HP dv7: copy the file fails error on disk 2 to 58% HP recovery

  My hard drive in my dv7 ENVY dies for the second time in two years (it was under warranty last time and I was able to fix). I bought the hard drive same exact (Samsung, 1 TB), tested in BIOS, past everything. When I try to make the image recovery with the HP recovery discs I received the last time my hard drive died, I get an error then that 58% on two recovery disc that says:

  Reducer

  Copy the file fails

  From: d:\preload\base24. STORMWATER MANAGEMENT

  To: c:\RM\Image\BASE24. STORMWATER MANAGEMENT

  Press OK to retry.

  I press OK and it does the same thing over and over again. People who questioned him on this same type of error seem to get anywhere here, but what choice do I have? The hard drive is the same size, same manufacturer, same model, it should have the question of reimage the system on a hard drive more small, right?

  Am I just out of luck on that? So frustrated.

  englejas

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post on recovery issues and wanted to help.
  
  Here is the link to the tool of creation of win8.1 media: installation media to create for Windows - 8.1 help Windows

  Understand, however, you might encounter a problem installing using the media created from this tool.

  You have a version of OEM HP of Win8 installed on your PC, and this means that the product key that is embedded in the motherboard UEFI firmware is OEM, not retail.

  While the media created from this tool SHOULD be activated using this key, there is no guarantee he will do.  If it is not the case, you can use this tool to recover your product key and try to enter it manually: Download Windows OEM Product Key Tool - MajorGeeks

  IF it still does not work, then your only recourse would be to order a new set of recovery from HP discs.

  You can look online for recovery from the paged media related: http://support.hp.com/us-en/drivers
  
  Once there, enter your product name or number. On your software page and download the drivers, select your operating system and version. Click on "Update".  If the HP recovery support is available for your computer, down near the bottom of the page, you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entty and click on order to press for more details.
  
  Or, if you prefer, you can do the same by contacting HP Customer Service:
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!

  However, HP customer care is generally not available on weekends, so you will have to wait until Monday to contact them.
  
  Good luck
  
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the symbol of the thumbs-up to the left of the answer key to say thank you.
  If my message solved your problem please click on "Accept as Solution" - to help others to find the solution.
  ========================================================================

• Copy the file fails the Windows 7 recovery discs sent hp

  I have tried to solve this problem for a month now and I'm at the end of my home.
  I am now on my third set of recovery discs HP and all have the same problem. I insert disk 1 by following the instructions on the support forum. She's going through
  Reformat the hard drive windows partition - tick
  Copy of the files needed to restore the hard drive - tick
  And immediately as ending, this window appears:
  Reducer
  Copy the file fails
  From: E:\PRELOAD\BASE. STORMWATER MANAGEMENT
  To: C:\RM\Image\BASE. STORMWATER MANAGEMENT
  Press OK to retry
  
  Three series of drives have the same come.
  What the hell is happening?
  I'm so sick of this.
  
  Read a few other posts with similar problems, but can't seem to find the solution. I don't have an external hard drive, I can use... only the laptop I'm trying to fix. (G6-1305sa)
  
  Any help? It also doesn't help when the HP support is open on the phones until 5:30 from Monday to Friday. I'm at work so can't call. So frustrating...
  
  Aaaarrrrrgggghhhhh

  Hi Belj,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP Pavilion g6-1305sa Notebook and not able to restore Windows. If the HARD drive is faulty, this can cause the restoration should not go well. You can try to run a test of material. Please note remove any and all USB devices and remove the memory card in the slot of the card reader. Disconnect all non-essential devices. What is the original HARD drive? Have you replaced all other parts? Have you tried to do a clean install of Windows 7. Try running sfc/scannow would scan your system to find errors on the command line. You can get to the command prompt by clicking F11 at startup. You can see this Microsoft document on the system recovery options.

  Hope this will help.

  Thank you.

• Linux RT - copy the file from the disk on USB

  Hi migration my code to a target of VxWorks to one target Linux RT (9068), I'm having problems to run a piece of code that copies files from the cRIO on a USB drive!

  This code works perfectly under my VxWorks (and same Pharlaps target). See attached VI.

  

  Some files (100k.txt, 1M.txt,...) are present in the my drive 9068 tmp folder. And I want to transfer them to my USB Flash DRIVE (U).

  The two folder exist when the code is running (checked with my WebDAV client).

  When running, the copy function returns 'error 8': authorization error.

  So I tried to check what was my permission on the folder U: 511. I tried to change the permission to 700: error 8!

  I then checked 'who am I'-online lvuser. I then connected to my webpage cRIO-online user permissions => I added my lvuser 'FSRead' and 'FSWrite' rights. The reboot of the target. -Online copy of files always returns error 8!

  However, it seems that I can create and write to a file in the folder U... I can read the files in the folder U... but not copy? !! ??

  What is going on? Can someone tell me how to copy files from my cRIO on my USB drive? Why is it difficult to do the basic things?

  Hi Paolo,.

  As described in my second post, file tmp is not the problem.

  I wrote to / c or even in/home/lvuser... Has not changed anything.

  It seems to me that the cam of problem of the fact that a lvuser (default user executing code lv) can not fundamentally 'touch' files created or modified by an administrator...

  In the first link you posted, at the end of the document, it is written:

  "Access the file and folder permissions are not applied on targets in real time OR the operating systems VxWorks or PharLap.  Objectives NI Linux in real time, on the other hand, use and apply the standard Linux style file and folder access permissions. »

  As I am not very familiar with the Linux environment, I might be nice to have more details about access permissions style of this linux standard.

• Copy a file from one computer to another

  Hi all

  I am trying to copy a file from a computer (where I program CVI) to another computer on the same network. How do I do? Can I use library functions plug supplied by C or y at - it of the other libraries available in labwindows?

  Thank you

  Kanu

  CopyFile () in the library of the utility accepts UNC paths, so you can do something like this:

  CopyFile ("MyFile.txt", "\\\remotePC\\remoteFolder\\myfile.txt");

  Avoid conflicts between this function and the corresponding Windows API function with the same name: read the online help for explanations.

  Simpler is better, don't you think?

• Copy/move files - security problem

  I have a laptop gateway model MP8708, which ran on XP.

  Jack was no longer working with the power cord and the battery wouldn't hold a charge. The computer is unusable without the power supply cord is not an option to turn back on my old Gateway computer. Instead of investing the money in the repair of a computer that is several years old, I bought a new computer.

  On the gateway computer (original), I got my computer set up to always ask for my password before it would allow access after 5 minutes of inactivity proved, or whenever the computer went into hibernation or has been disabled.

  The original hard drive Gateway has been removed so I could copy or move my files from the old hard drive to my new Acer laptop hard drive, and I have a device that allows me to use a USB to connect it to my new computer.

  The new Acer running Windows 7.

  -When I try to drag a file on my new hard drive, I get this: "file access denied. You need give the administrator permission to copy this file. "If I click CONTINUE, I get"file access denied. You need permission to perform this action. You need permission from the administrator of the computer to make changes to this file. »

  -When I try to drag an entire folder of my old hard drive to my new hard drive, I get: "file access denied. "You need give the administrator permission to copy this folder. When I click on CONTINUE, I get: "file access denied. You need permission of the administrator of the computer to make changes to this file.

  I guess it's because I had a password set up, I have * * know the password.

  How to get the old hard drive to let me copy or move these files? They are MS Word files as well as jpg, or audio files, etc., not computer programs.

  Thank you.

  Hello

  Try to take possession of the disc and check.

  a. click on the drive, click Properties and then click the Security tab.
  b. click Advanced and then click the owner tab.
  c. click on edit and then do one of the following:
  (d) to change the owner to a user or group that is not listed, click other users and groups and enter the object name to select (examples), type the name of the user or group and then click OK.
  e. to change the owner to a user or a group is listed in the change of ownership of the area, click the new owner.
  f. If you want to take ownership of the contents of the disc, select the Replace owner of subcontainers and objects of the box.
  g. click OK and then click Yes when you receive the following message appears: you are not allowed to read the contents of directory folder name. Do you want to replace the the directory permissions with permissions granting you full control?
  h. all permissions will be replaced if you click Yes.
  i. click OK.

  Appropriating a file or a folder
  http://TechNet.Microsoft.com/en-us/library/cc753659.aspx

• Error message "unable to copy the file"hiberfil", it is used by another person or program." Problem copying content from your PC to external hard drive.

  Original title: problem to copy content from your PC to external hard drive.

  I use Windows XP 2000 and am trying to restore my pc to factory settings as it is continuously 'stick '. When you try to copy my drive "c" on an external drive I get a message saying "unable to copy the file"hiberfil", it is used by another person or program." Close any program that might be using the file and try again "." What is 'hiberfil' and how do I close it down as I am not aware that I use?

  Concerning

  Pete

  The hiberfil.sys will be created every time that you start... If you put in hibernation enabled in your control panel, Power Options and the file is 'open' to think that you can actually choose to Hibernate at any given time.  When you Hibernate XP gives a note of it and will write a hiberfil.sys sometimes important in the c:\ folder so that when XP fires again upwards and returns from hibernation, XP will read the hiberfil.sys file and return to the situation that you were in when you put into hibernation.

  I use to be a chronic hibernant because it takes less time to return after hibernation as a cold start.  Sometimes, it can actually be slower that a cold so start your system based on the amount of RAM has.  The more RAM you have, the more your hiberfil.sys will, if sometimes it's faster to move with just a cold start if you Hibernate (26,03 seconds for me).

  If hiberfil.sys is giving you a hard time (you would not in any way copy it) disable hibernation in your Power Options and the file will be deleted immediately since it would be is no longer necessary.  That would solve this, but if you are trying to copy the entire C drive, you will have other files to complain after that.

  It is certainly possible to make a complete copy of the C drive, if you want, but you will have to initialize on something next to your drive hard if you want to do this so the XP files are not used - then you can copy anything and everything.  You can get some imaging software of disc that will also help you.

  It depends on what the problem is you want to solve and what you wand to end up with when you're done (so far, unspecified).

  I would work on figure our why your XP is paste and fix it in place.  XP should not be sticky.

• When I try to copy files to a CD, I get message "Windows has a problem to copy this file to a CD." How to fix? I get the same message that I click on "Copy to CD" or drag the file to copy to the CD player.

  When I try to copy files to a CD, I get the message "Windows has encountered a problem when trying to copy this file."  I press the button "Retry" without any result.  I get the same message that I have click on 'Copy' files on a CD or drag the files to copy to the CD player.  I was able to copy these same files to a CD a few days ago.  Thanks for the suggestions.

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  1. don't you get an error code along with this error message?
  2. what CD burning software is installed on your computer?
  3. what kind of CD do you use to burn?
  4. What is the status of the CD - DVD drive in Device Manager?

  Method 1.
  Let us first check the status of the optical drive in the Device Manager. Check if there is no error code or yellow mark is listed.
  Reference:
  Explanation of error codes generated by Device Manager in Windows XP Professional
  http://support.Microsoft.com/kb/310123

  Method 2.
  If the problem is to start the computer in a clean boot state and check if you are able to accomplish this task.
  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I want to copy all my jpg files to another directory (a portable hard drive) with some of the same names of JPGs, but not necessarily all. What will happen? The word 'COPY', will be some of the deleted files be added or nothing at all.

  I have a LOT of pictures in my computer (over a thousand) and I want to put them on a portable hard drive, I bought (1 terabyte) but I won't write any of the names of existing files with different images. IS THIS POSSIBLE? Do I need software or special hardware? I tried the copy/paste standard as well as move files to the new directory, but it seems that I can lose files. I'm not sure if the files that are missing (or lack, in my opinion) are not copied. When I finished emptying the directory, it shows that it is empty but the new directory does not seem to have any additional files that should be there based on the counting of the files before and after.

  Thanks for any help you can provide, Bill

  1: right-click and then drag the pix on the external drive. Release the right mouse button and choose copy here. They are there?  Now remove it from the computer.

  2: you can see pix of the same name overwrite each other, or be done with (1), (2), etc.. But even in this case, they will be interspersed with the former. If keep you them in separate folders with different names, that should not happen. Personally, I rename all the pix before storing them. You can select the set instead of the code of the camera and a group, rename the first holiday 2009 yo and the rest will be renamed holiday 2009 and each havf will one (1), (2), (3), after them.

  It is also a nice freeware tool which, among other things, can rename a group of photos easily.

  FastStone Image Viewer
  http://www.FastStone.org/

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA