"Coresync.exe no longer works."

Similar Questions

• Engine.exe no longer works how do I continue to work

  I can't play every time I try to open a game its says that the engine.exe has stopped working.

  Hello

  • What game are you talking about?
  • What were the changes made before the problem occurred?
  • What version of Windows are you using?
   
  I suggest you try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135
  NOTE: When you are finished troubleshooting, make sure you that put you the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.

• Standyby.exe - bad picture message arising and several programs are now no longer works

  Original title: Standyby.exe - bad Image message 19/08/12

  Hello world

  I get a Standyby.exe - bad picture message arise. Several programs are now no longer works as iTines, Photshop and MS Word. In the message window begins C:\Windows\assembly\NativeImages_v2.0.50727... I have run several anti virus and malware programs normally and in safe mode, try the system restore, run registry cleaner programs and even took the computer to my local computer guy. All of this is without effect. Given the nature of the message and the type of programs not responding, it seems that I have a missing or corrupt file regarding execution of the images, but I don't know. Can anyone help. I'm pretty close to the stage where I could reinstall Windows, but I only want to do this as a last resort, given the amount of programming that I have to re - install. Oh - the system I'm using is Windows7 home premium, 32-Bit, RAM decent, proccessor and HD etc.

  Any help... Thanks Jim

  Hello

  1 did you changes to the computer before the show?

  2. when exactly you receive this error message?

  3 have you experienced the issue when you opened the 'Safe Mode'?

  I suggest you follow these methods and check.

  Method 1:

  Step 1: Try to restart your computer in safe mode and check if you receive the error message.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If it works fine in safe mode, perform the clean boot and check.

  Step 2: Perform the clean boot using the suggestions mentioned in the link mentioned below.

  http://support.Microsoft.com/kb/929135

  NOTE: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

   

  Method 2: Run the tool (SFC.exe) System File Checker and verify the.

  Measures of the follow this link: http://support.Microsoft.com/kb/929833

  If the problem persists, I suggest you to bring observant event logs.

  Check Event Viewer for events, at the time, the problem occurs:

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  I hope this helps!

• Flash no longer works with Firefox 13

  so I have Firefox 13.0.1 and Flash Player upgrade to 11.3 and flash no longer works. I tried many things, but ultimately downgraded flas player for 11.2. Still no joy. The only way I can get Flash to work is if I start Firefox in safe mode with disabled modules. If I manually disable the modules from inside Firefox is still does not work, so I guess that's not quite the same as disabling safe mode. I have not installed RealPlayer. I tried to create a new profile, but still no joy. Other ideas for me to try please?

  If you install Flash of http://fpdownload.macromedia.com/pub/flashplayer/current/licensing/win/install_flash_player_11_plugin_32bit.exe still work?

  Try resetting Firefox Firefox Refresh - reset the parameters and modules

  Also, try turning off hardware acceleration, disable hardware acceleration

• Tecra M5 - shortcut to my chest is no longer works

  Hello

  My old faithful M5 was running a bit slow so I checked on the Toshiba website for any update (software) I have not found an upgrade for the my feature safe and decided to install it...

  Oops now my original shortcut to my chest no longer works and I can not find where the updated version so I can create a shortcut.

  For any help or suggestion would be appreciated.

  See you soon
  John

  Hello

  The shortcut does not work because the path to the exe file has been changed due to the update process.
  I recommend you delete the old shortcut and then to create a new.

  On the desktop, right-click and choose New-> shortcut.
  Here, you point to the exe (program) file that you have updated.
  I guess that you have updated something like password utility or security assist

• Re: Satellite Pro S500 - FN keys no longer work

  Hello

  My FN keys no longer work, I read to download the value added package and I made, but after the start of the exe file unzipped, nothing happening... no windows installation screen, nothing. Please help, I have the satellite Pro S500-115 Window 7
  Thank you very much in advance!

  Remove preinstalled VAP, restart your computer and try to start the installation again.

• Scanner no longer works from computer

  The scanner no longer works for the computer; It will scan the printer and transfer the file to your computer. The BONE has been recently upgraded to Windows 7 Professional; is this a coincidence?

  

  Hello bobford

  Thanks for the additional information. If you were able to locate the HPScan.exe try running it. It should be a direct link to the scanning software. Let me know if it helps to complete a scan.

• Qosmio G40: Toshiba Assist, StartLiveTV, Dolby (other?) no longer works

  After installing Win7 Ultimate, including the latest drivers downloaded on the Toshiba site, the following applications no longer work:

  (1) Toshiba Assist
  Application (TInTouch.exe) loads but ends up with a white screen.

  (2) TV connected to the TV button
  The StartLiveTV.exe application is loaded, it appears in the Task Manager, but closes automatically does nothing. Under Vista, it launched Windows Media Center.

  (3) Dolby button linked to Dolby
  This should start C:\Program Files\Dolby\Dolby control Center\DolbyVistaConfig.exe but the app has disappeared and I can't find a replacement on the Toshiba site. (Most recent Sounddrivers are installed but Dolby application is missing)

  Any thoughts on the 3 themes?

  Have you installed the Toshiba value added Package?

  You have the latest version of the BIOS installed G40? (Last is v2.20 I think)

• Fingerprint reader no longer works

  I'm a dv7-7250us, which is less than 1 year old.  It came with Win8.  I installed Win 8.1 beta and everything worked well.  When I installed the 8.1 final, I had to reinstall a bunch of my apps.  Once the dust settled, I found that my fingerprint reader no longer works.  No light show.  I reinstalled the driver but no joy there.  I have searched the SimplePass software but can't find it on my computer.  BIOS is F.28.  Prod # is C2H71UA #ABA.  Appreciate any assistance.

  TerrySchn

  Have you installed later validity pilot displayed on your Support page?

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-109892-1&CC=US&DLC=en&LC=en&os=4158&Product=5316947&sw_lang=

  Support page seems to be missing most recent SimplePass:

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63224.exe

• HP Solution Center no longer works after update of HP Officejet J6480

  HP will provide an update to fix this problem?  If anyone has had the same problem (if so, how fixed?)?

  HP has pushed down the updates on a week earlier for my HP Pavilion Elite e9270f running Windows 7 64 bit home and domestic all-in-one Officejet J6480 which are connected wirelessly via my network.  HP Solution Center had worked for several years until then, but now can no longer connect to the J6480 with all the features.  Devices and printers in Control Panel displays the connection.  HP HPHNDU.exe utility displays the connection.  Print from works of MS Office products as ok HP Solution Center no longer works.  I can't scan documents to the PC (that it is pulled by the PC or pushed by the J6480).  I used http://support.hp.com/us-en/document/c02266743 instructions and the software of HP Officejet and Driver Removal Utility OJJ6400_Scrubber_13.exe to remove all aspects of the printer and the software.  Then reinstall them using (with HP printer install wizard HPPIW.exe), but the new installation also fails linking the center of solutions HP (printing still MS Office programs).  According to me, it is a plague of HP inflicted that should have a solution from HP.  FG 120201

  Hi MFredV & 2015,

  Sorry to hear you've had the problem with the printer after you run the update. Please follow the steps below and let me know if you continue to have problems?

  Try using the brush included in the CD or download.

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-79309-1&CC=US&DLC=en&LC=en&os=4063&Product=3635378&sw_lang=

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-79309-1&CC=US&DLC=en&LC=en&os=4063&Product=3635378&sw_lang=

  10. run the download to reinstall the printer

• Networking adapters no longer work after the downgrade from windows 8 to 7

  Hi, I recently downgraded my laptop (g6-2228dx) Windows 8 for Windows 7 and my network maps no longer work, and windows Diagnostics says there is a problem with the drivers.  I checked the HP Support page for my computer model, but it has only drivers for windows 8.  I tried to install all the drivers, but none of them worked.  Any help?

  Hello:

  See if this card wireless driver works...

  This package contains the installation package driver for wireless LAN Qualcomm Atheros AR9000 controller series in the laptop models running a supported operating system.

  File name: sp63802.exe

  Ethernet: Download and install the second pilot on the list...

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTypeID=3&GETDOWN=false

• After having recently updated windows, some programs no longer work. In addition, System Restore does not work.

  After having recently updated windows, some programs no longer work.  Also, when I went to do a system restore, that he would not allow me to restore to an earlier date.  Among the programs that no longer work are VLC Media player, ieploxer, f.lux.  Even though I have uninstalled and reinstalled they would not load correctly.  I would get the splash screen for the program, but noting else.  When I am gone in Windows Task Manager the program would not appear in Applications, but there are processes running.  And an interesting thing, the exe afficheraient use of the 72K memory.  Still, even for different programs.

  What can I do?

  Start the command prompt, and then type

  sfc/scannow

  Do check and see what the result is.

  Also run full system scan with:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• How to install a driver for f4500? Error dot4_plugin.exe has stopped working

  I had this printer HP Desk Jet F4500 connected to my computer laptop operating system windows 7 64 bit for months now, the printer has no drivers and I can't get them.  I went on HP website and downloaded the base and the recommended full downloads and still the same error Stops the installation.  dot4_plugin.exe has stopped working the extent of attributes are inconsisitent.

  Help I am more than two hours in this and don't know where yet.

  I did some additional research on this issue, more specifically the error 'extended attributes are inconsisitent' and found that this seems to be a Windows problem. Here are a few things you can try to solve the problem:

  Method 1: Perform a scan of the file system (CFS) checker on your computer

  Steps to use the SFC/SCANNOW command:

  1. click on start-> click on all programs-> click Accessories-> right click on command prompt-> Select run administrator-> click on continue
  2. at the command prompt-> Type "sfc/scannow"-> press enter
  3. follow on-screen messages to start the analysis of the system (this process can take a long time)
  The following will happen:
  Start of the phase of verification of the scanning system of-> % of full audit.
  4. once the analysis is complete, you will see a message with one of the following:
  a. not found any breach of integrity
  b. find corruption but repaired
  c. corruption that he couldn't fix

  Method 2: System Restore will take your PC to a previous state when the PC worked.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start-> Type "System Restore" in the box start search-> click System Restore listed programs.
  Type your password-> click continue (if you have one)
  2. in the dialog box the system restore-> click on a different restore point-> click Next.
  3. in the list of restore points-> click a restore point created before you started having problems-> click Next-> click Finish.

• The Panel and the desktop shortcuts no longer work after the virus

  Originla title: shortcuts does not.

  The Panel and the desktop shortcuts no longer work!  I had other users on my computer and maybe a user to a virus?  I can open programs, but must do so by opening a file written by the program (for example, to open a Word file to get term; to open TaxCut to Taxcut) can anyone help?  (Uses can I have XP Home Edition.)  I tried the system recovery, but that has not fixed the problem!

  Hello

  · What is the number and the model of the computer?

  · You have security software installed on the computer?

  · What happens when you try to open the files?

  · You receive an error message or error code?

  1. follow the steps from the link below: cannot open files with extensions such as.exe, .com, and.lnk on a Windows XP computer: http://support.microsoft.com/kb/923077

  2. online virus scanner and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• kdbsync.exe has stopped working - win 7 64 bit

  I am running Win 7 64 bit on an HP Pafilion HPE h8 - 1360t.  After last week round of updates my computer can't play mp4 files, the Media Center will come is no longer (Message: "Windows Media Player has stopped working"), You Tube files will no longer play, the Web of magic HP also would not come to the top, and the mysterious "kdbsync.exe has stopped working" message when I reboot.

  After hours of reading the forums, I found that it seems to be related to the AMD graphics card update.  My computer has an AMD Radeon HD card 7570.

  On the AMD website it is listed as a legacy for XP computers adapter.  I don't know why HP installed in a computer running Windows 7 64 bit with an Intel Core I7 CPU.  It does give me confidence in HP equipment.

  The AMD utility correctly detected my card and told me that I needed a driver called:

  14-4-Win7-WIN8.1-64-DD-CCC-WHQL.exe

  But when I clicked the Down load button, I received the message, "could not conntect to the server.  Could not parse error. »

  I have not found such a driver on your Web site.

  How can I get my Media Center works again?

  The idea of turning off all non-Microsoft services, scares me to death that I now have my computer how I want it.

  I've also posted on the forums of AMD that I concluded that their Board of Directors has been offending material element:

  http://forums.AMD.com/game/messageview.cfm?CATID=454&ThreadId=173935&forumid=11 you can read my response to the agent who helped me.

  Basically, I had to uninstall all the drivers AMD and sotware using functions of control panel of configuration/programs & and then run the clean uninstall AMD program: http://support.amd.com/en-us/kb-articles/Pages/AMD-Clean-Uninstall-Utility.aspx

  Then install the drivers from here:

  http://support.AMD.com/en-us/download/desktop?OS=Windows+7+-+64#AMD-catalyst-packages

  I do not recommend installing this set of drivers unless you are SURE that they are correct for your hardware.  I could not use steps 1-5 on the AMD site because the last necessary step you choose the operating system that your equipment is running.  The HP installed in my computer 'last and best' video card a year ago was so old that the operating system that is only offered to step 5 have been XP and Vista!  Be aware that HP uses inherited in its latest PC hardware.