Corresponds to the driver and update pages broken?

Similar Questions

• Lightroom does not use my gpu and it says it is compatible, and the driver is updated, what do I do now?

  Lightroom does not use my gpu and it says it is compatible, and the driver is updated, what do I do now?

  As far as I could see, your card supports OpenGL 3.2 only that OpenGL 3.3 is necessary.

• "The drive where windows is installed is locked. Unlock the drive, and then try again. »

  Have a laptop Envy M6-K010DX. Due to a problem of the internet while improving to win 8 to 8.1, the PC does not start correctly, and Windows Explorer will not load. Has decided to "Refresh" of the operating system and is gone to F11 restore utilities. When I go to the utility of refreshment and follow the prompts that I reach a message that says, 'the drive where windows is installed is locked. Unlock the drive, and then try again. "I was looking for support for the unlocking instructions and apart from some commands bootrec (which did not work - probably because I don't have a Win 8 disc) not much is available.

  The only access I have for execution of orders made by the tasks Manager command-line and F11. What is this 'locked' drive, anyway? Someone at - it any information on that?

  Hello Lara.

  IF you have updated from 8 to 8.1 and the process was interrupted during installation, this may damage the disc and therefore locked error. "Refreshing" the system would not be the answer that you need to clean install Windows 8 again. 8.1 update can break the bond of the recovery partition, especially if it has become corrupted as indicated.

  You must clean up the installation with the recovery discs, you must have created before you updated to 8.1.

  In addition, if you do not have the recovery disks, you can buy a set of HP or install a regular copy of Windows 8 and then update the drivers manually. HP has the Windows key now integrated into the bios.

  This forum is used on a voluntary basis and is not maintained by the HP Support for substitution of contact.

  Your message looks like not it was even 24 hours old before you decided to delete it from the original computer?

  I'm sorry to hear you had to do this.

  If you need to HP support, you must contact them directly to your country or region.

  Contact HP-Assist phone USA | HP® official site

  Contact HP worldwide | HP® official site

  Good luck with the new computer.

  Any brand or model you purchased now, don't forget to create the recovery disks/drive.

• I want to connect my Macbook Air (IOS 10.9.5) with my amp stereo House (TEAC I-501DA), which has a USB connection. I followed the steps described in the manual TEAC to install the driver and my Mac says it is installed correctly, but it does not appear I

  I want to connect my Macbook Air (IOS X 10.9.5) with my amp stereo House (TEAC I-501DA), which has a USB connection. I followed the steps described in the manual TEAC to install the driver and my Mac says it is installed correctly, but it does not appear as an option in the preferences/system sounds.

  Version 1.1.2.2 El Capitan driver support, then why don't upgrade you your MacBook Air to El Capitan?

• I tried to reinstall yosemite OX since yesterday after I wipe the drive and it froze.  It is said bark 2 hours and 7 minutes since last night.  What can I do?

  I tried to reinstall yosemite OX since yesterday after I wipe the drive and it froze.  It is said about '2 hours and 7 minutes' since last night.  What can I do?

  Try to turn off the computer with the power switch, and then restart.

• I have a Hp Pavilion Media Center Edition 2002 running. How will I know if I have all the patches and updates, I need? Also is free upgrade to the edition of 2005?

  I have a Hp Pavilion Media Center Edition 2002 running. How will I know if I have all the patches and updates, I need? Also is free upgrade to the edition of 2005?

  Hi Philofduluth and thanks for posting.

  There is not a free upgrade for Media Center 2005. If this is something you would like to do, I contact your OEM manufacturer and ask if there is a software upgrade, they can provide you.

  If you have all the updates that are available for your system go to http://update.microsoft.com . Here, you can see all the latest reviews and optional updates that may be available to you and make install.

  I hope this helps. Let us know if you have any questions.

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• 5530 Evvy replaced printer - need to replace the driver and software?

  Hello

  Recently, I had to feel my 5530 all-in-One printer replaced while it was still under warranty. The replacement came with new driver software and everything, but since it is the same model that I decided not to install it and use the existing driver installed on computers instead. (Replacement not be come with directions for uninstall, said by the way.)

  The new printer is connected to the wireless network (using touch screen) and is recognized by computers on the network, but I can't get anything to print, since the existing driver HP software does not seem to 'find' the printer. Do I still need to uninstall the driver and reinstall? And what about the other programs installed with HP printer?

  The computers are all Windows 7 64 bit.  I'm not very technical, so it makes me a little nervous.

  Thanks for any help you can give.

  Running the diagnostics to http://www.hp.com/go/tools can help solve the problem.

• Error: "the drive where windows is installed is locked, unlock the drive and try again" while trying to regenerate the system

  My daughters Toshiba S955-S5373 went all green, she says while she helped the battery out. I didn't know she was in trouble. We tried to solve; However, Bad_system_config_info appears before diagnosing and resolving problems. After 4 hours, nothing has been resolved.

  I found the DVD we created initially and attempted to load that. We shut down the laptop with the power and reverse holding F12 button. I tried to boot from the DVD, but it does not read the DVD and just crossed the initially to start and diagnose and solve problems. I have waited 2 hours, but without success.

  I turned off again and I just tried to refresh the PC. He said "the drive where windows is installed is locked, unlock the drive and try again".

  I then tried auto repair but could repair. Log file C:\Windows\System32\Logfiles\Srt\SrtTrao;/txt appeared.

  I even tried to reset the PC as a last resort. But the message failed to reset the PC required A disk partition is missing.

  Don't know what I can do. Can you help us?

  Original title: Toshiba S955-S5373 will not start

  Hi Annaed,

  Thanks for posting your query in Microsoft Community.

  I can understand your concerns to your system and will certainly guide you in the right direction to solve the problem.

  Control bug BAD_SYSTEM_CONFIG_INFO occurs if the SYSTEM registry hive is damaged. However, this corruption is generally unlikely, because the bootloader, known as NT Loader (NTLDR) in versions of Windows prior to Vista, checks a hive for corruption when loading the hive.

  This bug check can also occur if some values and critical registry keys are missing. You keys and values may be absent, if a user manually change the registry.

  As per the error message "the drive where windows is installed is locked, unlock the drive and try again", I would refer to the suggestions posted by phanlon7 replied on 12 October 2013 in the next thread and check if they are useful.

  Windows crash hard drive - discount - locked, unlock the hard drive

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Impossible to print the first and last pages of a pdf of the 8 page?

  I have a pdf of 8 pages exported from an InDesign document. I can print it without any problem on my MAC, but when I will forward it to a partner, she is unable to print the first and last pages. Any ideas?

  Hi jimr67163466,

  Could you please let us know the version of Adobe Reader is installed on the machine?

  What operating system is installed on the machine-Windows/Mac?

  The pdf is printing via a network printer?

  This phenomenon happens with a specific document only or with other documents as well?

  Try to print the pdf as image, launch Adobe Reader, click Print > select your printer from the drop-down > click on advanced > check the print as Image > and then click OK.

  Let us know if it worked.

  Thank you

  Shivam

• I volunteer for installation of the Government in New Orleans.  I'm helping recommendations on equipment and software.  Their editing computer cannot be connected to the Internet.  How to buy and receive the software and updates?

  I volunteer for installation of the Government in New Orleans.  I'm helping recommendations on equipment and software.  Their editing computer cannot be connected to the Internet.  How to buy and receive the software and updates?

  Please see this link in the topic "successful."

  Creative cloud using Enterprise | Applications and updates

  You can use managed delivery of applications for the following:

  • If you need to exercise strict control over the applications installed on client computers.
  • If end-users have administrator privileges on the computer.
  • To reduce Internet bandwidth consumption by preventing multiple downloads of self-service.
  • If there is no Internet access on client computers.

• Is there a fault with upgrade 2.13.121 for the interface Adobe Creative Cloud? I want to check the updates of the program and update freezes at 5% - I have now tried 6 to 8 times to + 5 min once - it's over half an hour of my life!

  Is there a fault with upgrade 2.13.121 for the interface Adobe Creative Cloud? I want to check the updates of the program and update freezes at 5% - I have now tried 6 to 8 times to + 5 min once - it's over half an hour of my life!

  Hi David,

  Please check the help below document:

  https://helpx.Adobe.com/creative-cloud/KB/Error_Code_2_failed_update.html

  Kind regards

  Sheena

• First elements of Windows 8.1 does not share the drive and folder out of operation but does not create something like never help

  First elements of Windows 8.1 does not share the drive and folder out of operation but does not create something like never help

  What version of the program do you use?

  What steps do you take to share your video, and what happens when you do?

  Is it only a DVD that will not be out of Premiere Elements, it or will it not exit/share any video size?

• Question about the bleeding and facing pages.

  Hello

  I'm in trouble with my first InDesign document which is a 96-page Magazine. It will be printed on sheets A3 stapled in the middle. My impression of the guy said it's ok in the form of A4 pages with 3 mm overhang.

  So now when I try to export in pdf print (I check the brand I want to use the documents of bleeding parameters) exports with the sections on the left and right pages (left page exported with? I guess than 3 mm? bleed from the right page and so on). If I replace the parameters bleeding and I set to 0mm it is all ok, but I fear that certain images or text could get cut because I have everything with the substantive benchmarks lost in indesign.

  And I can't uncheck pages face to face since I have some graphs (graphs and so on) that spread from one page to another (on the same spread).

  My question is... I can do and always use the bleeding or (ignore "inside the bleeding' or something) or is it OK to use the export as a spreadsheet instead of individual pages because he wanted pages A4?

  Any help for a beginner would be appreciated. Thank you.

  "' You can set inside bleed to 0 in the configuration dialog of document or in the export options when you make the PDF, or if you absolutely need to have inside purge for creep (want, but check with the printer), see InDesignSecrets" Blog Archive "Pages Breaking Apart to bleed off a spine

• What is the exact difference between cloning the database and updating of the database?

  Hello
  
  Can someone like me precisely the difference between cloning the database and updating of the database?
  
  I have some conflicts in these topics.
  
  Thank you
  Rajesh

  Discounting is what he says, "Refresh". You have a main site which would always have the data inserted into it. There is another site that would stay somewhere else. This site needs to be updated with the main site. It must be the export of primary, push the site high school and done!

  HTH
  Aman...

• NAV to and links page broken after update of the content viewer!

  I just put a message from my client asking why all the Nav and page links to the links do not work? She has just updated the Viewer on his ipad.

  After updating the content on my Ipad Viewer the same thing happened.  I now have to download each article again to see if this corrects the folio.

  I've updated the 1 article and this seems to have fixed the entire folio links. Signature and content viewer seems however to stop the links once again. At the moment I have everything works again. Is this a bug?

  The fix is now in place. Download the new version of DPS App Builder and edit or rebuild your single-folio application. The links on the page should function properly.