Corrupted - DMREngine.exe

Similar Questions

• Several questions, the system crashes, corrupted notepad.exe.mui, SFC scan errors, cant play Battlefield 4 game

  Original title: I need help - corrupt notepad.exe.mui

  Hi all! This is my first time around these parts, so forgive me if I make a mistake and prepare for a long story.

  Quick information on my computer:

  Windows 7 64 bit

  AMD Radeon HD 7950

  8 GB RAM

  Intel i5 4670 k 3.40 GHz Quad Core

  Recently I bought Battlefield 4 for PC. I have loaded on my computer with ease but quickly came across a problem when I tried to play the game. My GPU drivers were apparently outdated and he gave me the choice of either a. cancellation of the launch, or (B) try to play anyway. Looking forward, I tried to launch anyway. No dice, the game freezes immediately and I can not play. At a time of the option.

  After traveling around for a bit, I discovered that my drivers were, in fact, to date and should update. So I downloaded the latest drivers, "AMD Catalyst Omega", and you click install (note that I have not manually uninstall previous drivers, so I don't know if it has really done anything). After that, he went through the whole process, do things (I suppose) as uninstall the old drivers and install the new. After it was over, I was able to boot successfully in the field of battle 4 and was able to play both the campaign and multiplayer without fault at 60 fps oh high heat. (Great game BTW, recommend to all who love FPS).

  Well, after a few hours, I decided to call it a night. After closing, I noticed that the bar at the bottom of my screen flickered from top down in very quickly. Naturally, I found it quite strange and decided to shut down my computer (thinking at the time, that I should probably do that as soon as the new drivers were installed - it was the result of not doing).

  The next day, I woke up wanting to start playing Battlefield 4. But, much to my dismay, my computer froze as he was loading the desktop. Now, it was nothing new for me, I had a lot of computer problems in the past, I can fix it this one as well. My first thought was just reboot and see if that will change anything. Unfortunately, he did nothing. He froze in the exact same task as he had before. It started to scare me a little. Previously, during an automatic update of windows, is the same thing. He has downloaded everything installed fine, very good, but when my computer restarted and tried to load to the top of my desk, my computer would freeze. Finally, I had to use system restore and restored my computer to a point before Windows automatically updated. After that, I disabled the automatic updates and him haven't touched since (Yes, my computer is has not been updated for months and months. I think that I stopped the download of updates at the time an update of Windows technically dirtied by malicious software that would crash the computers).

  I noticed the problem how similar I saw now was the question I had before with the updates of Windows. So I took to the system restore and wala, my computer was still running reliable update of the driver pre - GPUS. Now, I was still burning for some 4 battlefield. Whether I went through the same process as before, it would result in the same outcome, I did a little research. It turns out that someone had a similar problem for me. Their solution was to ensure that information on previous drivers had gone to 100%, and it said to use two programs called DriverFusion and CCleaner, well, I followed the instructions of the solution: uninstall the drivers - with DriverFusion - restart good computer - installation of new drivers - to go, but once again, no dice. A frozen at the exact same task as it did before.

  Now completely annoyed at all this, I'll be back and system restore to the point that I just had previously. Except that this time it did not work. Were no longer my system restore bringing back me to the settings of the computer that worked, it would freeze (and sometimes a blue screen), every time I tried from the desktop. Sometimes, I could get a few minutes before it would freeze, other times that I do not see my office. And it doesn't matter what time I have to put in place. Sometimes, the system restore would work, sometimes it wouldn't, but in two results, it would freeze at the office.

  Panic is now being that my computer does not seem to work at all. I can still run without danger made (thank God for that), but normal Windows is just the gel. As my panic slowly transforms into a will, I turn to google to see if someone is having my exact problem (Note: everything I do on my computer is in safe mode, and any internet research I do is on my smart phone). Finally, I came across a page saying: I need to use the command "sfc/scannow" and this should solve my problems. If I use the command, and he said that he detected problems, but has been unable to fix. He also said that he saved the information on the analysis in a journal, a journal that I could access. So I do! The entrance to the EXACT newspaper that speakes of the error is.

  2014 12-26 11:46:03, info CSI 00000321 [SR] verification complete
  2014-12-26 11:46:03, info CSI 00000322 [SR] repair of components 1
  2014-12-26 11:46:03, Info CSI 00000323 [SR] beginning verify and repair
  2014-12-26 11:46:03, info CSI 00000324 Member \SystemRoot\WinSxS\x86_microsoft-windows-notepad.resources_31bf3856ad364e35_6.1.7600.16385_en-us_1dbc2e35304db501\notepad.exe.mui file hashes are not actual file [l:30 {15}] "notepad.exe.mui": "
  Found: {l:32 b:tfmxBgEeHYSqU0nOhrdrRtqL98a1xYC32if7l90WiOg =} expected: {l:32 b:o2tSWlTNsLpfCP + I3R4E0Dz7Z4HwNtMMweSbWEZCHTw =}
  "2014 12-26 11:46:03, info CSI 00000325 [SR] cannot repair the military record [l:30 {15}]"notepad.exe.mui"Microsoft-Windows - notepad.Resources, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture = [l:10 {5}] 'en-US', VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch"
  2014-12-26 11:46:03, info CSI 00000326 Member \SystemRoot\WinSxS\x86_microsoft-windows-notepad.resources_31bf3856ad364e35_6.1.7600.16385_en-us_1dbc2e35304db501\notepad.exe.mui file hashes are not actual file [l:30 {15}] "notepad.exe.mui": "
  Found: {l:32 b:tfmxBgEeHYSqU0nOhrdrRtqL98a1xYC32if7l90WiOg =} expected: {l:32 b:o2tSWlTNsLpfCP + I3R4E0Dz7Z4HwNtMMweSbWEZCHTw =}
  "2014 12-26 11:46:03, info CSI 00000327 [SR] cannot repair the military record [l:30 {15}]"notepad.exe.mui"Microsoft-Windows - notepad.Resources, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture = [l:10 {5}] 'en-US', VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch"
  "2014-12-26 11:46:03, info CSI 00000328 [SR] this component was referenced by [l:266{133}]"Microsoft-Windows-WindowsFoundation-LanguagePack-Package~31bf3856ad364e35~amd64~en-US~6.1.7601.17514.Windows Foundation Language Pack.
  2014-12-26 11:46:03, Info CSI 00000329 repair results created:

  "(Note that I stressed and bolded what I assumed important information, and it's the only mistake he came with).

  The only thing that I have noticed time and time again is the reference to a file called "notepad.exe.mui". Curious, I investigated more research and found that the file may be damaged and even deleted without knowing you, even by simple virus. Now, I know that I had a virus on my computer when the update of the driver. Try to add the pieces together, I thought that maybe this virus was the reason that this file has been going crazy and maybe even corrupt the file itself. Later in the article to tell me about the "sfc/scannow" command, he said that if it is available, I can get the file from another computer that is the same as mine. So, I borrowed laptop from my brother, running Windows 7 64-bit, publish the file on his computer, put it on a flash drive, plug it into my computer, move my old notepad.exe.mui on the desktop (Yes, I still have the original) and replace it with my brothers.

  Now for the part I did not yet understand. Replacing the file met with some success. After the first restart, my computer blue armored, but after the second reboot, it was in normal operation once again! Pre - GPUS normal update driver, that is. But nevertheless reliable running. Careful, I decided to run my anti-virus, Avast! and see if something happens. Of course, on a quick scan, he found a "malicious" file and I "moved it to the chest. To be doubly sure that all is well, I decide to run a scan at startup and have it automatically move all the malicious files, he finds 'trunk' or whatever he calls. I allow this to run at night and wake up to find that my computer still works reliably.

  Well, not wanting to take another chance, I run "sfc/scannow" once, just to see the error is still there. Nothing has changed. Sad it's not yet over, I again to replace the "notepad.exe.mui" in my computer this time that I deleted it, with one always on the flash drive. No blue screen on reboot, but I decide to again run the command "sfc/scannow". Once again, same error.

  At this point, I have no freaking idea what to do. My last two options are to use my disc and 'repair installation' and see if it makes something or just completely re - install Windows, which without a doubt, I don't want to do. Now, I can still play my old games very well. It's just I can't update Windows or drivers, fear, it may have a very dangerous effect.

  Anyone with any information which could be of use, please do not be afraid to say something. I come to this community as my last resort. Any information will be helpful, and I will watch this post like a bird of prey. Thank you for reading all of this. I'm sure it was quite the trip.

  Hello Logan,.

  Thanks for your reply, appreciate the time taken by us keep up to date on the State of the question.

  To proceed with method 2 and then Fixit and manual steps to reset the Windows Update components in method 3 and check running SFC analyzing once more.

  If the problem persists even after trying the method 2 and 3 the method successfully, you can try to repair (MBR Master Boot record), boot sector and Boot Configuration data via Bootrec tool in the article below.

  Use Bootrec.exe in the WINRE to troubleshoot startup problems.

  http://support.Microsoft.com/kb/927392

  Just reply with the results. We will be happy to help you.

• Configuring updates... Missing or corrupt NTOSKRNL.exe

  Hello

  I have a sony VGN NR260E, (Windows Vista Home Premium) recently on power, windows entered the dreaded

  Configuring updates 1 3 mode...
  She was followed by a reboot that caused the error

  Windows boot manager cannot start Windows...
  File ntoskrnl.exe
  Status: 0xc0000098
  Info: windows could not load because a required file is missing or damaged

  So, fortunately I have a recovery disk and I did a recovery to a previous restore point - and windows came fine. Since then, I have disabled the Windows updates

  The problem is in the power down and turn on the system back in the
  Configuration of updates (followed by a ntoskrnl.exe error restart failure) mode

  The result is that
  1. I cannot turn off without going through this lengthy procedure
  2. I can't get updates

  So, how to stop windows from "reflection", there is somehting to configure (new can't power upward).

  I also tried the fix Windows6. 0-KB937287-v2 - x 86, but when I run it it says it isn't neceassry (or something similar) on my system

  Please help because it is originally no end of grief

  Thank you

  Hello

  Yes it shouldn't affect other updates, however this never caused that it could.

  Good idea to run these just in case where after any hotfix:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ---------------------------------------

  So don't forget to run these two:

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Description of the system update for Windows Vista, for Windows Server 2008 analytical tool, for
  Windows Server 2008 R2 Release Candidate for Windows 7 Release candidate
  http://support.Microsoft.com/kb/947821

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Driver for Synaptics touchpad package is corrupted (sp66926.exe)

  Hello

  I'm trying to install the latest driver for the touchpad of my G2 355 HP and when I try to run sp66926.exe im getting an error message that the executable file has been corrupted. Redownloading didn't help and manual extraction that neither does.

  File: sp66926.exe

  OS 8.1 Windows 64 bit

  The old version of the G2 355 driver worked perfectly.

  Thank you for your help.

• Vista sp1 corrupts ntoskrnl.exe

  Installed Windows Vista Home Premium 32 BIT of Dell supplied DVD of resettlement on new Western Digital HDD (1 TB green SATA600 HD 64 MB) in replacement of primary transmission single partition in Dell XPS 410 with 4 GB of RAM.  Tried to update with Windows Vista Service Pac 1, downloaded from the site Microsoft Web (http://windows.microsoft.com/en-US/windows/downloads/service-packs).  Both times I tried to perform the update the following appeared on the screen: "cannot start Windows.  A recent hardware or software change might be the cause.  To solve problem 1. Insert your Windows installation disc, and then restart your computer. 2. choose your language settings, and then click Next.  3. click on repair computer.  File: ntoskrnl.exe; status 0xc0000098; Info: Windows failed to load because a required file is damaged. "Completing steps 1 to 3 following the startup repair products:"Startup Repair cannot repair this computer automatically"and the details of the repair diagnosis says"C:\ntoskrnl.exe is corrupt ".  I had to do a system restore to before I tried the update for the restart of the computer.  Any idea what the problem might be with the installation of SP1?

  .. .are say you my best plan (perhaps only) action is to reformat the hard drive and upgrade to Windows 7?

  Assuming that the computer passes Win7 Upgrade Advisor with flying colors, you can format the HARD drive and then do a clean install of Win7 (which would need to buy a commercial full version of Win7) but you can not upgrade to Win7 computer (using a version upgrade from Win7) unless Vista SP1 is installed.

  Otherwise, the best solution would be to be formatting the HARD drive and then do a clean install of Vista exactly by the (my) message of reply in this thread: http://answers.microsoft.com/thread/c44429fb-3f7c-4646-8529-5a97bb3cd0eb

  Note: The computer must NOT be connected to the internet or local networks (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.

  Wish I had better news for you. Good luck!

• Special pool of memory detected corrupt ntoskrnl.exe

  Hello!

  Once in half an hour I got BSOD (SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION ntoskrnl.exe + e6212)

  Processor: Intel (r) Core i3 - 2350 M CPU @ 2.30 GHz 2.30 GHz

  RAM: DIMM1: Elpida EBJ40UG8BBU0-GN-F 4 GB DDR3 - 1600 DDR3 SDRAM

  SSD:Hitachi HTS547550A9E384 (500 GB, 5400 RPM, SATA-II)

  Video card: AMD Radeon HD 7570 M/HD Graphics of 7670M

  Minidump:

  https://onedrive.live.com/redir?RESID=4982205B8928A6E4! 106 & authkey =! AKMpL-MjYaMOp4w & ithint = the file % 2crar

  Thanks in advance

  2011 is not the latest version, and even if it was you completely remove the corrupted driver and install a clean copy

• Satellite M70 151: message: not found or corrupt ntoskrnl.exe

  Hello

  Since I am not native English, I try to explain my problem as exactly as possible:

  I've used this laptop for XP Prof. two days there are about 1 1/2 years, I did my full weekly
  all partitions with acronis true image backup.

  Yesterday, I had the following problem:
  BIOS showed RAM, HDD etc work, and then I thought: 'not found ntoskrnl.exe or damaged, please install '.
  a new copy"wow...

  The same in safe mode. My acronis rescue cd didn't start, a knoppix and linux cd does not start.
  and even trying to boot from my XP cd: 'error in txtsetp.sif, cannot continue. " BTW, all the
  CD dΘmarrez well on another xp laptop.

  Someone have an idea, or should I say goodbye to my laptop?

  Sincerely, Noelle

  [Edited by: admin]

  Hello

  might be possible that the RAM is faulty. Already tried a RAMtest with Memtest86? These things happen when the HARD or the RAM disk is defective. It sounds like a hardware problem, so I suggest you to bring your machine to an authorized service partner.
  Here is a link if you don t find a servicepartner:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT
  (Toshiba support - global ASP Locator)

  Welcome and good luck

• corrupt ntoskrnl.exe Vista configuration problem

  Windows Vista goes into an endless loop of updated Configuration, before he go to step 3, it will stop and restart with the message "Windows is loading files" then it trying to repair for 20 min, + manage to restore the system and return to the login screen. When I look at the log file, it states that the ntoskrnl.exe has been altered.

  I would really appreciate technical assistance to resolve this issue once and for all.  This problem seems to happen every now and then. Initially, I thought it was to do with Norton ISv10, but after the removal of this software, I still have the problem.

  Help please!

  mtang33,
  What version of Windows and level of service pack are you running?

  Take a look at this article as it can help with your problem.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• computer won't reboot after updates missing or corrupt ntoskrl.exe

  I have a HP pavillion laptop - I have upgraded to Vista Business (so I than the cd) the computer failed to install service pack 1 for ever. He kept getting an error which is ambiguous in the research. However, one day last week he decided that it would update on its own. After the update I get a message that indicates that the ntoskrl.exe file is missing or damaged. The machine does not start without failure or other mode. I got started with the disc once. I thought that the problem has been corrected - and then I restarted the computer a few days later and it happened again. I succumbed to get it to load all the. It is said that it can not be solved. The only time where this morning, I had to complete the restore of the system, the machine has restarted and began its count of files (I think that some 97000 files + as the update of windows) and loop to the same error message. I got to a command prompt and looking for help on what to do next. Thanks in advance for your help. In addition, because I bought the Vista upgrade separately - do any free support from MS? If so - where should I call? Thanks again.

  Hi Upinthenight,

  Thank you for using the Microsoft Vista answers Forum.

  You can follow the steps mentioned below and let us know if it works:

  1. put the Windows Vista installation disc in the disc drive, and then start the computer.

  2. press a key when you are prompted.

  3. Select a language, a time, a currency, a keyboard or an input method, and then click Next.

  4. click on repair your computer.

  5. click on the operating system that you want to repair, and then click Next.

  6. in the System Recovery Options dialog box, click command prompt.

  7. once we are on the command line, type Bootrec.exe /fixboot, and then press ENTER.

  Go to your second question on the support options for Windows Vista; Phone/Chat for Windows Vista support is paid but the free support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009.

  Thank you and best regards,
  Abdelouahab

• Frequently corruption file characterset OCR and real-time CVS1454 exe file

  HI I am facing strenge same problem in the application of vision. I'm using equipment NI CVS 1454. Is there an OCR on CVS application that inspect the product on the conveyor. I made different characters to choose file of different labels on the product. Now main problem is sometimes not exactly when my chracterset file, Pattern matching templete and corrupts my exe in real-time. I joined a few ok and corrupted file characterset here and also an exe in real-time.

  When I open my file (.abc) characterset in Notepad, that I found damaged files after entering text.

  ####
  #Date: Wed, Aug 1, 2008 11:28
  #OSName: PharLap
  #OSVers: 13.0
  #AppName: PH_EXEC
  #Version: 8.5
  #AppKind: AppLib

  LVRT. DLL loads the address: 0x002F6000

  I don't understand how this error massage journal if written in .abc or rtexe files, which make it currupt... I have also attached my structuring code image file.

  Dear prashantpatel21,

  I do not know how to disable the log of LabVIEW RT errors, at least, is not that you or I could have access.

  It's the idea that deactivation of LabVIEW RT logging of errors will decrease even more the impact of corruption?

  Have you made progress with your service request?

  ~ Nate

• C\windows\system32\rundll32.exe application not found

  whenever I try to open an app in the Control Panel, the above message appears.can someone offer advice on how to fiz this because I know very little about these amazing machines. Thank you.

  Hi tonypartners,.

  This problem occurs because of a missing or corrupted Rundll32.exe file. This problem can also be caused by a virus.

  Method 1: Follow the steps mentioned in the article below

  Cannot find the Rundll32.exe file when you open Control Panel

  http://support.Microsoft.com/kb/812340

  If the problem persists,

  Method 2: A scanner online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Svchost.exe - k netsvcs constantly download

  I work on a XP Home SP3 computer that constantly downloading using system32\svchost.exe - k netsvcs. It will download as long as the computer is connected. Before realizing the problem, downloading 1.4 GB. I use Netbalancer to observe the process. This is a customers computer.
  Things I've tried:

  > Disable automatic updates of windows. The computer has been updated last week.
  > Scan with Malwarebytes, Security Essentials, MFRT, AVG TDDSkiller in windows and safe mode when possible. AVG found 6 google corrupt toolbar.exe in Temp files. Others do nothing are.
  > Deactivate restore system and rescan with AVG, while the computer is connected.
  > The computer has always had Norton AntiVirus installed. It found and removed 1 virus by setup_lib_srf [1] .exe which contained "Downloader" in 2009.
  > Disabled Background Intelligent Transfer service but netsvcs downloads yet and the BITS service back to automatic after a reboot.
  > Ran svchost.exe fix from Microsoft which is for high processor use but thought it might help.
  > The IP remote netsvcs is in contact with belongs to Akamai Technologies when windows automatic updating is disabled. With the updates automatically on other ip addresses belong to Microsoft.

  I ran Hijackthis if you want as the journal.
  Any help is greatly appreciated.
  Tom

  Hi trg53,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the following forum.

  Windows XP IT Pro category

• 'c:\windows\system32\'rundll32.exe '. try to remove the program from Control Panel

  get the foregoing, when you try to use the control panel

  Hello

  Thanks for posting the request in the Microsoft community forums!
  If I understand correctly that you receive the error "" c:\windows\system32\'rundll32.exe"" on the computer. Provide us information.

  You did changes to the computer before the show?

  This problem occurs because of a missing or corrupted Rundll32.exe file. This problem can also be caused by a virus. Then you can try the solutions and check.

  Method 1:
  You can try the suggestions section of the knowledge base and check.
  Cannot find the Rundll32.exe file when you open Control Panel
  http://support.Microsoft.com/kb/812340

  Method 2:
  You can scan System File Checker to fix corrupted files.
  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747

  Reference:
  File system (CFS) Checker
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  If you need help with this issue or other problems related to Windows Operating System, keep us informed. We will be happy to help you.

• Error message cannot open Control Panel after installing the bsaving, missing rundll32.exe application.

  Original title: If I reinstall Windows XP is that what he's going to recover my rundll32.exe file?  It cannot be found anywhere. Thank you.

  This has happened after I acquired a discount to purchasing application called «bsaving» Now I can't access control panel to uninstall the software.

  Hello

  (1) what exactly happens when you try to open Control Panel?
  (2) what is the accurate and complete error message?
  (3) don't you make changes on the computer before the show?

  This problem occurs because of a missing or corrupted Rundll32.exe file. This problem can also be caused by a virus.

  Method 1:
  I suggest you try the procedure described in the article and see if it helps.

  Cannot find the Rundll32.exe file when you open Control Panel
  http://support.Microsoft.com/kb/812340

  Method 2:
  If the problem persists you can scan your computer anti-virus using the Microsoft Safety Scanner.

  Microsoft safety scanner will help us to get rid of software viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Warning: If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.

  For more information, please see the link.

  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  I hope this information helps!

• How to add and remove programs via the control panel when access pops up an error of windows\system32\rundll.exe

  need to know how to fix the windows\system32\rundll32.exe to be able to go to add remove programs and other options in the Panel

  From the other thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/how-to-access-Add-and-remove-programs-through/852bd751-106C-481F-B471-9f32ddc40eab

  old question, new question so what I do or how to set or return rundll.exe in my computer?

  old question question/new - matter always request how to fix or recover from the windows/system32/rnudll.exe in computer science. I see no other answer to this anywhere

  Hi DadVQ,

  ·         Did you do changes on the computer before the show?

  This problem occurs because of a missing or corrupted Rundll32.exe file. This problem can also be caused by a virus.

  Follow the suggestions below for a possible solution:

  Method 1: Follow the steps mentioned in the article below and check if the problem still persists.

  Cannot find the Rundll32.exe file when you open Control Panel

  http://support.Microsoft.com/kb/812340

   

  Method 2: If the problem persists, I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: While hard disk analysis if bad sectors are found when scanning try to repair this area, all available on which data can be lost.

  Let us know if that helps.