Could not find flash.ocx

Similar Questions

• Error code 28: could not find the drivers. Windows 7 64 bit could not find the drivers for my Seagate Expansion Portable Drive. The same system works for another 32-bit version of windows 7.

  Hi, I would be grateful for help on this, I bought a new seagate expansion external hard drive not too long ago (abt 3 months old) and tried to use the device only recently (to back up my files). Windows has detected the drive but says that it could not find the drivers. (code 28)

  When I tried the drive on a 32-bit computer, it showed up working find and dandy. When it is plugged in the computer of the alien-ware, same error.
  Tried the uninstall from Device Manager and restart the computer, still the same error.
  Services.msc open and found windows install offshore. He turned on automatic, but the same error came out. Plug and play Windows was already working.
  Checked Windows SP1 worked, still the same error.
  He got me completely baffled.
  Before this, I had other problems with USB and disabled driver signature Verifier (I think that's what it was called) before you boot into windows. Worked very well for my flash drives each time that I did.
  I also had another external HARD drive which was held only 160G and it worked, so I'm not sure what the problem is with this particular external hard drive.
  Please help, I'm going crazy on this problem...

  The specifications of my devices are as follows:

  Computer

  Model:

  Alienware M14x

  Type of system:

  64-bit operating system

  Hard drive model:

  Portable Seagate Expansion 1 TB drive

  Hello

  28 error code means that the device was not fully installed.

  Method 1: Connect the device, run the hardware and devices Troubleshooter and check if that helps.

  To open the Troubleshoot utility equipment follow the given link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: You can update the drivers and check out them.

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Additional information.

  Install a USB device:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  Hope this information helps.

• "Could not find the good (s) below referenced in the catalogue:" error found in the catalog.

  I created a catalog in the catalog for the workspace folder to the same location as the Default.cxml is. I created a library of service interfaces and a library for implementations of service following the instructions in the http://help.adobe.com/en_US/enterpriseplatform/10.0/AEPDeveloperGuide/WSabb771403789c7a3-3 1e63d5312fb7375fac - 8000.html #WSe851854fd1e0856a3adf5f4513046ea7dc4-7ffe. When I use the annotations described my service and the interface library interfaces are added automatically.

  When I deploy my catalog there is no error. I use CRXDE Lite and go to the/content/mosaic/catalogs / [my catalog name] and I can see my interfaces and classes in this service.

  I have create a new Flex for ADEP experience Services and selected the catalogue project that I created. In here, I create a new style sheet in the package of style sheets, and it is created in [project] / src/styleSheets / [name of the style sheet]. I have a right-click on the style sheet and selected "Compile CSS to SWF". My stylesheet is automatically added to the catalog.

  I try to deploy the catalog at this point and it gives me the error "could not find the good (s) below referenced in the catalogue:"and then lists my style sheet. "

  Is that what someone has had this problem and have an idea of what hole I'm fall in?

  I reinstalled Flash Builder and deleted the folder of crx-quickstart on Services of experience so he would have to rebuild.

  I am able to deploy the catalog with a specified pane. I created a stylesheet at the top level of the src folder, it did not appear in the catalog and the catalog deployed.

  I'm not sure what was the causes of the problem with the tiles. I saw it reappear briefly. I deleted the project and re-created and the problem disappeared.

• Could not find the time stamp option in the historic window

  Could not find the option "date of visit" in the historic window as described in "ehow" for Firefox

  This is the most recent column visit.

  Have you looked in the menu ' views > show columns "in the library?

• Could not find ' subject: accidents using the address bar

  My question is with Firefox (35.0.1) constantly crashing, I try to find my submitted incident reports but could not find ' subject: accidents using the address as directed by Mozilla bar. I type "subject: accidents and end up with 'the address is not valid'." My browser crashed between 25 to 30 times in the last 6 days, I presented reports every time and 6 times, I also introduced my address to receive a response, none was forthcoming.
  Home PC is used by a few of us, while the children use their own laptop computer, to save time logging in and out, each of us using another browser. Nobody in our family has problems with IE or Chrome on the PC at home, nor children. The only person to have problems is the poor SAP who drew the short straw - me.

  I can a fair bit of advice? During my research, these constant crashes, I see that many, many others have had the same problem and for quite a few years apparently. Should I just accept that this is part of the use of Firefox and don't forget to take some Valium drops in my tea before logon? or perhaps the healthier choice, find a.n.other browser and move everything out there?
  I wonder Auto Add info and willingness, but understand that I do not use the Firefox browser to do this now because he planted just - seriously.

  Hello type about: crashes without an empty space (on: crashes)

  Thank you

• >: everyone is having the same problem with all the days that I have now with the update on thursda after update, it could not be started "could not find xpcom" restored Dáil

  with the update of daily Thursday (Australia) after update owned couldn't boot received message "could not find xpcom.
  I then restored by day sauvegardΘ installed upgrading again every day would not restart with the same message
  I tried again on Saturday you have the same problem
  I'm now ignoring the update message that is very annoying because he wants me to update daily

  The bug in question should be solved with a daily update of today. However, I agree with the recommendation to go with 31.0 once it comes out next Tuesday, or at least to use the beta versions (once per cycle) as a compromise between stability and get the latest features and updates to the platform.

• Could not find full download for RC build (30.0 RC2). Update fails. Beta channel has my current build (30.0b9).

  Could not find full download for RC build (30.0 RC2). Update fails. Beta channel has my current build (30.0b9). Channel has version 29.

  Update always fails on this work a bit locked machine.

  The Release Candidate of 30.0 build2 is located in http://ftp.mozilla.org/pub/mozilla.org/firefox/candidates/30.0-candidates/

  The 30.0 Firefox will be released June 10 if all goes well.

• A friend added to the discussion group, but could not find the cat on his Skype

  Hey my friend had some difficulty in finding a focus group that it has been added to. It has certainly been added, and we tried a lot. We have updated the Skype. Re-uploaded and more. Nothing worked, the cat is nowhere to be found. I've been in this chat and it had approximately 20 members and I could see his name in the members box, but he could not find his Skype chat.

  NVM,

  Benopro wrote:
  

  Hey my friend had some difficulty in finding a focus group that it has been added to. It has certainly been added, and we tried a lot. We have updated the Skype. Re-uploaded and more. Nothing worked, the cat is nowhere to be found. I've been in this chat and it had approximately 20 members and I could see his name in the members box, but he could not find his Skype chat.

  NVM, it fixed

• Satellite L500 - could not find the SRS audio device

  At the start of my Satellite L500, a message appears saying - could not find the device audio compatible srs. This has happened when I upgraded to windows 7.

  Can someone tell how to fix this?

  Hello

  I have the Satellite L500 also but I couldn't t notice this problem. SRS audio device that has something to do with the audio driver, I think.

  What do you think to update this driver? You can get it here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Before installing the latest version I recommend you remove the old first. Do a restart and install the most recent.

• Satellite A200: could not find a driver XP for GeForce 7300

  Hi all

  I am trying to install an operating system on the Satellite A200 XP, but I could not find a suitable driver for the video.
  I downloaded from the support page by selecting all the drop down menus, and the driver works well with the material.

  Please, you could direct me to a place where I could download the driver.

  I just bought the machine, and I have no patience to wait to see it work.
  Thank you much in advance.

  What you mean exactly with the driver works well with the material?

• HP Pavilion g7-2043sf: Windows could not find a driver for your network card

  Model: HP Pavilion g7-2043sf

  Product number: B1P51EA #ABF

  Today, I did a clean install of Windows 7 on this laptop and I can't connect to internet via wifi. When troubleshooting I get this message:

  Windows could not find a driver for your network card
  Windows does not detect a network card is installed correctly. If you have a network card, drivers for the card cannot be installed correctly.
  Install a driver for your network card
   
  Collection information
  Windows Version: 6.1
  Architecture: amd64
  Time: Thursday, December 24, 2015 12:34:16

  In Control Panel, I found this information:

  Ethernet controller: the drivers for this device are not installed (Code 28)
  Hardware ID
  PCI\VEN_10EC & DEV_8136 & SUBSYS_1844103C & REV_05
  PCI\VEN_10EC & DEV_8136 & SUBSYS_1844103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200
  
  Network controller: the drivers for this device are not installed (Code 28)
  Hardware ID
  PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C & REV_00
  PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C
  PCI\VEN_1814 & DEV_539A & CC_028000
  PCI\VEN_1814 & DEV_539A & CC_0280

  I visited this side: http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-g7-2000-Notebook-PC-series/5226249/model...

  I need all drivers of network?

  Thank you.

  Hello:

  You need these drivers...

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp55979.exe

  This package contains the installation package driver for Ralink Wireless LAN to laptop models controllers that are running a supported operating system.

  File name: sp58586.exe

• Deployment of sbRIO 9606 chassis LabVIEW (sbRIO-9606): (Hex 0x80DF001E) could not find the plug-in for this deployment item. Make sure that the appropriate software is installed.

  Hi guys,.

  I have problems getting my sbRIO 9606 to deploy.

  Everything's fine until during the deployment process, I get this:

  Deployment of sbRIO 9606 chassis (sbRIO-9606)
  LabVIEW: (Hex 0x80DF001E) could not find the plug-in for this deployment item. Make sure that the appropriate software is installed.

  I tried to reinstall LV (ensuring that FPGA & RT deployment options are checked) and the 9606 software shipped, but it made no difference. I'm still waiting my next serial key by NOR, I have to wait that I recorded it before I can deploy?

  Please find attached the screenshots of my:

  • License Manager OR
  • Overview of the 9606 MAX
  • My project folder
  • Dialog box deployment where the error is displayed.

  -Adam

  Hi Tim,.

  In time real 11 is installed according to the recommended software battery installation program included on the disc NEITHER RIO provided in the starter pack.

  The problem is that the recommended Software NI Scan Engine 3.0 installation program.

  The sbRIO 9606 does not support scanning engine.

  Once the scanning engine support has been uninstalled, I could deploy on my 9606.

• could not find the drivers for window7 32 bit 15-d018TU hp

  Dear Sir, I recently bought 15-d018TU with window 8.

  I installed 32 bit Windows 7.

  but I could not find the drivers for window7 32 bit.

  I need drivers now

  1 network cards

  Bluetooth 2 controller

  3 network controller

  4 PCI simple communication controller

  5 SM bus controller

  USB 6 bus controllers

  7 Ethernet controller

  Hello:

  You should be able to use all the W7 32-bit drivers and software from the HP Probook 450 G0 on your model, except the audio.

  Your model uses the Intel HD graphics driver.

  DO NOT USE ANY BIOS OR THE FIRMWARE OF THIS MODEL FILES

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=5359407&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4052%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Audio: Accept the agreement.  Download and install the driver first on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

• Error when access instrument ' primary error: (Hex 0xBFFA003D) could not find any channel or repeated capacity channels.

  Hi all

  I believe that I have correctly configured max I'm trying to use the PXI-6229 device via. When I try initialized, I get the following error:

  The primary error: (Hex 0xBFFA003D) could not find any channel or repeated capacity channels.

  Clues about what means error?

  Thank you

  Manesh

  First of all, you'll have more help in the appropriate forum.  This seems to be a problem DAQmx and their forum is here: http://forums.ni.com/t5/Multifunction-DAQ/bd-p/250

  Secondly is this help: http://forums.ni.com/t5/Switch-Hardware-and-Software/NI-SwitchExec-with-3499-and-IVIDriver/td-p/1827...

  Finally: You can communicate with the MAX card?  Or is the occurrence of the error in MAX?  What language do you use to talk to the card with?  Using IVI?  If you are using LabVIEW or CVI then open examples of shipping and test them with this card.

  Kind regards

• Could not find LM238 regulator of tension in Multisim

  I am new to Multisim.  I can't find a LM238 voltage regulator in the library under sources power supply voltage regulators.  In fact, I did a general search and could not find anywhere.  What is usually done in a case like this?  My intuition tells me that I wouldn't need to redraw my circuit just because I can't find a component in Multisim.

  Thanks in advance.

  Hello

  We don't have a model for the LM238, but we have a model for the LM138. According to this data sheet, the LM138, the LM238 and the LM338 are identical with the exception of the beaches of operating temperatures. You can place a component LM138 to the master database and use it for the simulationand implementation.

  Hope that helps.