Could not find the system protection in windows 7

Similar Questions

• Vista - FAILED: could not find the system volume, reconfiguration is not possible.

  Hi, someone would be able to look at these newspapers please and advise, new to VM and trying to convert my old Vista PC before migrating fully to Windows 7, but its failure to 96% with "FAILED: could not find the system volume, reconfiguration is not possible." error.

  Thanks in advance, Dave

  Make sure your username is Administrator and UAC disabled on your Vista machine. HTH

• (95%) FAILED: Could not find the system volume, reconfiguration is not possible.

  Hello

  I'm trying to virtualize a physical machine to my VMware infrastructure. I success to another machine, but this time it crashes.

  Here are the features:

  Software: Client VMware Converter standalone 4.0.1

  Machine: Microsoft Windows Server 2003 Enterprise with Exchange 2003 SP1

  Disks: 2 * 80 GB drives used in RAID 1 software mirror (2 partitions C: & D: cross the two discs)

  VMware farm: ESXi 4.1

  Configuration of the converter: http://image.bayimg.com/faackaadc.jpg

  I try to convert the machine but I get the following message "FAILED: could not find the system volume, reconfiguration is not possible." 95 per cent at the stage of reconfiguration (he create only a single vmdk).

  My research, it is likely due to software mirror, implying to dynamic disks.

  But I must not modify the physical machine, I have to migrate the computer because it is unchanged.

  A machine appears in vCenter. When I started it, it does not start. With QParted, I activated the flag of "boot". Now the machine starts, but I immediately get a blue screen even in safe mode. ( http://image.bayimg.com/faacaaadc.jpg )

  I've added the vmdk to another machine, and run diskmgmt.msc to convert dynamic disk to basic disk, but he saw disc base already.

  Initial configuration of the drives here: http://image.bayimg.com/eaacoaadc.jpg

  Attached files: boot.ini and newspapers

  What can I do to convert my machine?

  Thank you and sorry for my English

  =====================================================================================================

  Hello

  I try to virtualize a physical machine to my VMware infrastructure. I successful already have to pay another machine, but it it crashes.

  Here are the features:

  Software: Client VMware converter standalone 4.0.1

  Machine: Microsoft Windows Server 2003 Enterprise SP1 with Exchange 2003

  Disks: 2 80 GB drives used software mirror RAID 1 (2 partitions C: and D: cross on two discs)

  VMware farm: ESXi 4.1

  Conversion of configuration: http://image.bayimg.com/faackaadc.jpg

  I try to convert the machine but I get the following message "FAILED: could not find the system volume, reconfiguration is not possible." 95%, stage of Reconfiguration (it has created only a single vmdk).

  According to my research, it is probably due to the software mirror, which created from dynamic disks.

  Alternatively, in I am not touching the physical machine, I have to migrate the machine what without changing.

  A machine appears well in vCenter, when I start, it does not start. With QParted I activated the 'boot' flag The machine boot now, but I get a blue screen immediately, same en safe mode. ( http://image.bayimg.com/faacaaadc.jpg )

  I added the vmdk on another machine, with diskmgmt.msc I wanted to convert the dynamic disk to basic disk, but he was already seen as a basic disk.

  Here is the initial configuration of the discs: http://image.bayimg.com/eaacoaadc.jpg

  What can I do pour machine to convert my?

  Thank you

  Have you tried

  Try the option "set up the machine" of the converter against the vmx file that you already have.
  
  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• Failed: Could not find the system volume, reconfiguration is not possible

  Hi all

  When converting to a Server 2003 server to server ESXi 6.0.0 I received this message after all 96%.

  (FAILED: could not find the system volume, reconfiguration is not possible. ) )

  I use VMware vCenter Converter Standalone 6.1.1

  Anyone encountered this problem and found a solution?

  The log file is attached.

  Thank you very much!

  Terence

  Your problem is:

  2016 05-18 T 11: 09:48.300 + 08:00 WARNING vmware-converter-agent [02332] [sub Originator@6876 = Default] ERROR: [Mntapi_GetFirstBootDisk] more than * a * found active volume. Current active drive #0, another active drive #1

  Go to diskmgmt.msc and diskpart.exe and delete active indicator second disk/partition 1

  Also, keep in mind that mount point C:\backup\Ext\ is not copied.

  HTH

• Help, please - could not find the system volume, reconfiguration is not possible.

  I'm trying to P2V a Windows 7 64-bit HP8460p I followed different advice. running as admin, turn off UAC, decrypted the drive hard, etc., and I still get the "cannot find the system volume, reconfiguration is not possible" error.

  I don't know I'm missing something stupid. I have attached the newspapers; any help would be greatly appreciated.

  I had to delete the partition 'System reserved' to make it work.

• Could not find the download link for windows media playe 11

  Hello

  I visited the following web pages to download windows media player 11 for windows XP, but I am unable to do:

  1) http://windows.microsoft.com/en-US/windows/downloads/windows-media-player

  2) http://windows.microsoft.com/en-US/windows-xp/help/windows-media-player/11

  Please can someone help me find the download link.

  Thank you

  Assem

  You are in the search not very hard... Here is the link: http://www.microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=1d224714-e238-4e45-8668-5166114010ca

• HP DeskJet 722C (720 Series) could not find the new driver for Windows 7

  I upgraded my OS to Windows 7, I had XP.  My HP Deskjet 722C worked fine, now it doesn't.  No driver Windows 7 on HP Web site.  Is there a solution?  Is there a solution?

  If you use a 32-bit version of Windows 7, you can add a driver using the following: go to the folder devices and printers, add printer, the local printer, LPT1: (or the parallel port regardless of the printer is connected to the), select the Deskjet 720C driver.  You may need to click the Windows Update button if the pilot does not initially in the list.

  If you use a 64 bit version of Windows 7 there is not a solution at this stage, the supplied drivers have a problem.

  

• Could not find the button firefox on windows 7

  don't have firefox button that gives me all the options

  To use the configuration of simple synchronization you must upgrade to Firefox 5 by choosing Help > check for updates on Firefox.

  To synchronize a phone with an installation of Firefox 3.6, you will need to click on the "I'm not near my computer" and enter your user name, password and sync key.

• Could not locate the system volume

  I have a very similar problem that has been published before; However, the posted solution worked.

  I can't find in the newspapers, what is actually wrong.  If anyone can help, I'd appreciate it.

  "Then the conversion of a server to ESX 3.5 Server 2003 I received this message after only 95% complete.". Failure of the Reconfiguration of the error. With the State: FAILED: could not find the system volume, reconfiguration is not possible.

  I use VMware vCenter Converter Standalone 4.0.1"

  Newspapers reported the following errors (which are equivalent):

  Impossible to reconfigure a source that doesn't have a system volume

  converter.fault.ReconfigurationNoSystemVolumeFault

  It seems that there are 2 physical disks in the system

  > Drive:
  . \PhysicalDrive0 a type of adapter: 1

  > Drive:
  . A type of adapter \PhysicalDrive1: 1

  Converter is to see the C:\ as long as the system volume, but there is no active flag set on it.  The second disc is recognized, but according to it's Converter:

  > is a dynamic volume. No significant partition information may be associated with him

  So, it looks like there's a mirror of software on the source physical system or the original system was dual boot between something like Windows 2008 and 2003 Server.

  If it's a mirror of the software, you can:

  -remove the mirror and conversion

  -Use gparted on the virtual machine to set start-up/active at the first vmdk file flags, and then reconfigure the virtual machine via converter

  If it is a dual-boot configuration, then I do not think that it is supported.

  Kind regards

  EvilOne

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• Just upgraded to Windows 7 Pro. Could not find the normal system games (solitaire, spider solitaire,... etc.). Where are they?

  I have just upgraded to Windows 7 Pro.  Could not find the normal system of games (Solitaire, solitaire spider, mine sweeper, etc.).  Where are they?

  Go to control panel > programs and features > turn Windows features on or off and place a check next to games and click OK. Carey Frisch

• Error in Windows Mail - "error 623 - system could not find the directory entry for this connection".

  Original title: Windows Vista, Windows Mail, error 623, unable to connect to the mail.
  This problem occurred after a storm. Modem was fried.  Replaced the modem with the modem "2wire" ATT.

  Now get "error 623: the system could not find the directory entry for this connection"or the sys works very well. " Att think maybe in Vista?  Help, please. Works of g-mail, but I like Windows mail.

  Hello Bbuddes,

  You can watch the following information/tutorial to help with most of the problems of Windows Mail.
  http://www.Vistax64.com/tutorials/62560-Windows-Mail-problems.html

  There is a section to reset Windows Mail which can help with your problem.

  Sincerely,.

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Error code 28: could not find the drivers. Windows 7 64 bit could not find the drivers for my Seagate Expansion Portable Drive. The same system works for another 32-bit version of windows 7.

  Hi, I would be grateful for help on this, I bought a new seagate expansion external hard drive not too long ago (abt 3 months old) and tried to use the device only recently (to back up my files). Windows has detected the drive but says that it could not find the drivers. (code 28)

  When I tried the drive on a 32-bit computer, it showed up working find and dandy. When it is plugged in the computer of the alien-ware, same error.
  Tried the uninstall from Device Manager and restart the computer, still the same error.
  Services.msc open and found windows install offshore. He turned on automatic, but the same error came out. Plug and play Windows was already working.
  Checked Windows SP1 worked, still the same error.
  He got me completely baffled.
  Before this, I had other problems with USB and disabled driver signature Verifier (I think that's what it was called) before you boot into windows. Worked very well for my flash drives each time that I did.
  I also had another external HARD drive which was held only 160G and it worked, so I'm not sure what the problem is with this particular external hard drive.
  Please help, I'm going crazy on this problem...

  The specifications of my devices are as follows:

  Computer

  Model:

  Alienware M14x

  Type of system:

  64-bit operating system

  Hard drive model:

  Portable Seagate Expansion 1 TB drive

  Hello

  28 error code means that the device was not fully installed.

  Method 1: Connect the device, run the hardware and devices Troubleshooter and check if that helps.

  To open the Troubleshoot utility equipment follow the given link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: You can update the drivers and check out them.

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Additional information.

  Install a USB device:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  Hope this information helps.

• The system could not find the environment that has been entered - option Windows 7

  I don't know what I was doing at the computer before this problem started. However, I first noticed that something was wrong when I tried to open the photo viewer and was faced with the problem of the impossibility to find the module specified for this program. In an attempt to solve this problem, I tried to download and install the Photo Gallery in Windows Live and this is when I first discovered that my system has this problem.

  
  

  I went online to search for solutions to these problems, but none of the solutions worked. Here are the steps that I tried in vain that the system could not find the environment option that was entered.

  
  

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/E272E37C-3C80-409F-8CDF-F3F2242B97D4

  I tried open CMD with administrator privileges but am unable to do so. Once more, the next step on the start-up of the Installation DVD of Win 7 to use the Startup Repair tool doesn't have that the system was unable to find the environment option that was entered. I proceeded to try to use the system restore, but is facing the same problem too.

  
  

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/E272E37C-3C80-409F-8CDF-F3F2242B97D4

  This is the report on my existing variables according to the steps there. But unfortunately, this thread has shown no solution, that I could undertake, given that I can't open Regedit too.

  
  

  
  

  %ALLUSERSPROFILE%

  APPDATA

  ASL.log

  CLASSPATH

  COMPUTERNAME

  ComSpec

  FP_NO_HOST_CHECK

  HOMEDRIVE

  HOMEPATH

  LOCALAPPDATA

  LOGONSERVER

  NUMBER_OF_PROCESSORS

  OPERATING SYSTEM

  Path

  PATHEXT

  PROCESSOR_ARCHITECTURE

  PROCESSOR_IDENTIFIER

  PROCESSOR_LEVEL

  PROCESSOR_REVISION

  ProgramData

  GUEST

  PSModulePath

  PUBLIC

  QTJAVA

  NOMSESSION

  SystemDrive

  SystemRoot

  TEMP

  TMP

  USERDOMAIN

  USERNAME

  USERPROFILE

  WINDIR

  
  
  Can someone help me please? I think to reformat my computer if this continues (think of how to do it now I can't run the Windows 7 Installation disc either).
  
  
  Thank you very much.
  
  
  Nicholas C

  You can probably fix your problem by using the system restore. Here's how it works:
  1. keep tapping F8 during the first phase of startup.
  2. select Repair from the menu.
  3. Enter the administrator password when you are prompted. It is often empty.
  4. When you are prompted, select System Restore.
  5. set Windows to a point before this problem occurred.

• "I received a message to activate the firewall of windows as important, but when I try to turn it on it gives me" the systerm could not find the environment option.

  #corrected "tehe systerm could not find the environment option" in the title

  "the system could not find the environment option"

  Hi nickzino,

  (1) what is the complete error message you receive?

  (2) since when are you facing this problem?

  (3) remember you to make changes to the computer before this problem?

  Method 1: Let flow the fixit available in the link below and then check

  Security Warning: the Windows Firewall is disabled

  http://support.Microsoft.com/kb/2288085

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************

• At startup, getting the error - the system could not find the environment that was entered

  I have Windows Vista Home Premium and I have the OS on my hard drive with no CD. I get the following error message when I start my laptop on the desk. The system could not find the environment that was entered. What can I do to fix this?

  The only answer I found in Google:
  http://UK.answers.Yahoo.com/question/index?QID=20100411034348AAALd89

  Your laptop you happens to be a Sony Vaio? What model?